Detailed product description 1) water proof, anti-uv, fire resistant, corrosion resistant 2) ce, iso9001 certificate. 3) used with insulated aluminum or copper conductor. 4) fully sealing rubber provides safe live line working, without peeling the insulation of the conductor. Features: 1. Usage: for fire-resistant or fire-retardant cables connecting branches (such as: tunnel, construction and so on) 2. Connection quality: "hot spots" are eliminated with a shear head screw that ensures the correct tightening torque. 3. Easy installation: to install the whole series needs only two hex wrenches (1/2" and 5/8"). 4. Safe: i. P. C can be installed on an energized conductor; however, the tap must not be under load. 5. Corrosion resistant: connectors are made from high strength corrosion resistant plastic and galvanized steel bolts (stainless steel is available upon request).
Product description: Applied to air insulated lead earth protection and temporary prove electricity. Product range: Use for isolated conductor to undergrounding Type Pctgnd95/25 isolated25-95mm /gnd rings Pctgnd185/95 isolated95-185mm /gnd rings Pctgnd240/150 isolated150-240mm /gnd rings Used materials: Uv&fire resistant pa66, pvc, dacromet or h.D.G(optional)finished steel. Variants: Variant of the product is also manufactured and supplied in modification's as is showed upwards in product range. Storange and transport: Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous. More information please contact to us by email or visit our homepage: crop-group.Cn. Standard package
Product description: Purpose of insulation piercing connectors(ipc) is to connect main and one(pc13), two(pc24) tap conducor's of section, how is written on ipc body.Type without letter b serves to connect isolated conductors, with letter b bare conductors.Ipc for one tap conductor is equipped with cable termination cap pcec16/120, for two output wires-no cap. Ipc consists from two glass-fiber reinforced plastic parts, which are fited with two brass tinned teeth's, which are coated with uv-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt, nut and pinch fixation segment.The terminals marked t are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber, providing optimal ventilation of ipc. Product can be also used as tap connector inside low boltage boxes. Product range: Pct13 150/150 re/rm, isolated 6-150mm /isolated 6-150 mm, cu/al. Pct13c 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm, cu/al. Pct13c 70/35 re/rm, isolated 6-70mm / isolated 4-35 mm, cu/al. Pct24 120/120 re/rm, isolated 6-120mm / isolated 6-120 mm, cu/al. Pct24 240/150 re/rm, isolated 95-240mm / isolated 16-150 mm, cu/al Pct13b 150/150 re/rm, bare 6-150mm / isolated 6-150 mm , cu/al. Pct13cb 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm , cu/al. Pct13c 70/35 re/rm , bare 6-70mm / isolated 4-35 mm , cu/al. Pct23c 185/185 Pct24b 120/120 re/rm, bare 6-120mm / isolated 6-120 mm , cu/al. Pct24b 240/150 re/rm, bare 95-240mm / isolated 16-150 mm , cu/al. Used materials: Uv&fire resistant pa66, pvc, dacromet or h.D.G(optional)finished steel, tinned copper. Variants: The product is manufactured and supplied in modification's as is showed upwards in product range. Storange and transport: Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous. Standard package
The main advatage comparing to the reusable gun+sterile studs are: 1. Disoposable gun can avoid diseases transmitted by the reusable gun, to protect not only clients, but also operators, which is why hospitals like it. 2. To save the first investment of the piercing gun 3. Convinent, studs are preloaded. We even give a free acohol swab to disinfect the skin.
Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN
Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons
Great for layering during your pregnancy. Wear them lounging around the house or dress them up with a cute tunic top Stretch, relaxed fabric for a comfortable and flattering fit all day long Weave type: Knit Please click on our Motherhood Maternity logo above to shop our brand Super soft and stretch full-length legging with a 28-inch inseam and secret fit belly - (r) us patent nos. re43563, re43531, 7814575, and 7900276 Motherhood's exclusive secret fit belly - (r) us patent nos. re43563, re43531, 7814575, and 7900276 is a seamless stretch maternity panel that grows with you throughout your pregnancy
Red Belly Reefcod
Salmon Heads V cut 400g+ (salmon salar) Packing: 10kg per carton Origin: fresh salmon in Norway Shipment: between end of October â?? beginning of November Quantity: 40ft x 1 ( abt. 20mts) Salmon Bellies 1-3cm (salmon salar) Packing: abt. 20kg per carton (20-25kg) Origin: fresh salmon in Denmark Shipment: From Denmark (HC & CO issued by Danish authority) Payment: 30%TT in advance and 70%TT against shipping documents Export/Import approval number in Vietnam is no problem.
Greetings, I am writing on behalf of the Canadian Industrial Company (CIC), a trading firm with over 20 years of experience. Our expertise lies in both exporting and importing salmon, tuna and live fish from various corners of the globe. We can offer fresh salmon heads and ballies. In addition to fresh delivery, we also offer the option of freezing the salmon heads. Category: Fish leftovers Tags: Heads and ballies, Salmon CATEGORIES Fish remains Variations - Fresh Deep freeze or fresh Packaging - Tub Max kg box in container Import in Vietnam Price and Minimum Quantity Price FOB in USD: -
Natural materials, artificial weaving, the details will inevitably imperfect, there may be color differences, glitches, or seagrass splicing, hope you can tolerate its little flaws. The basket is not fixed by iron wire and may be deformed when it is squeezed. If the bottom is not flat, please flatten it out again. Plants cannot be directly planted in baskets, they need to be planted in pots, put the tray under the pot then put it in the basket. The basket size chosen must be larger than the pot. The surface of the basket has been painted with a layer of environmentally friendly paint. Water may damage the basket's paint, please do not put it in a damp place.
Rs 595 / PieceGet Latest Price Minimum Order Quantity: 100 Piece Non-Stick(Y/N) No * Encapsulate Bottom. * Can be used in both induction and LPG Stove. Size: 41 cm Non-Stick(Y/N):No Additional Information: Item Code: MAC_ST_BC Packaging Details: CORRUGATED BOX PACKING
Frozen yellow fin tuna belly Size: 100-300, 300-500, 500-700, 700 up 90%NW, 10% Glazing Packing: IQF, bulk 10kgs/ctn Shelf life: 24 months
Product Description Frozen Tuna Belly, Multiple Cuts, Uncuts Price of product ( USD price or FOB price) : USD$3.9-USD$4.7/kg Product origin : Indonesia Key Specifications/Special Features : Frozen Tuna Belly, Multiple Cuts, Uncuts. Skin On/Off. Minimum Order Size and Packaging details : Minimum Order: 20ft' Container. Packaging: Layer Pack, MC
* Please contact us for price. * deboned, milk glands/nipples and flare fat removed * injected with brine at 10% of green weight (raw weight) and drained briefly * vacuum packed in bag and 4 units in each carton
First to go on and last to come off- its your bra panty set we are talking about. Getting ready in the morning can be a time-taking tasks for us ladies. Picking the correct dress, the right pair of shoes, make-up, hair and much more... What can really save your time and keep you sorted is a matching bra-panty set. A lot of women feel wearing a matching bra-panty set makes them feel a bit more confident and sexy on the inside. There are so many underwear sets that are comfortable and stylish to be worn on every day basis. We offer a wide variety of everyday basic bra-panty sets that are both comfortable and sexy. A woman should always have options. When buying a set, pick at least two different styles, one basic and the other super-stylish. For example, a full coverage T-shirt bra with hipster for your Mondays and a sexy bralette with a bikini for your Sundays.
This ear hole is made of high-quality 316L surgical steel, which is known to have flat texture and high durability. For the variants of gold and rose gold, the scratch-resistant PVD coating is covered. As a dream decoration, there is a crystal clear crystal in the middle, this jewelry obtained the unique charm. Its reinforcement thickness is 1.2 mm, and its reinforcement length is 6 mm. Material of product : 316LSurgical steel/F136 titanium Surface treament: highly polished/coating Product Color: Natural Color ( Steel ) | PVD Black | PVD Gold | PVD Rosegoldl Color of product: clear Bar thickness : 1.2 The length of bar:6mm The side of ball :3mm The side of design 7X19mm All sizes are approximately All dimensions can be customized !
This type insulation piercing connectors are suitable for all types of LV-ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided. Suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. insulation piercing connector
Customized Insulation Piercing Connector Customized Flameproof Insulated Piercing Connector Insulation Piercing Connector for Insulated Overhead Lines 1kV Insulation piercing grounding connectors (CONWELL type) selection table Type (mm2) Main Line Section (mm2) Branch Section Bolt Quantity (pcs) KWLW-1 5-120 35-70 1 KWLW-2 35-70 16-35 1 KWLB-1 16-95 16-95 1 KWLB-2 1 KWDM-1 16-120 4-35 1 KW4-150-2P 16-150 16-150 2 KW2-95B 16-95 4-50 2 KW4-150A 16-150 16-150 2 lation piercing connector(IPC) 1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. Performance testing 1. Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997. 2. Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead. 3. Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting. 4. Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998. 5. Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing. 6. Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks. 7. Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4. -
1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. -
