The PSA Oxygen Generator is an air separation unit which is based on molecular sieves selective adsorption of nitrogen from air and can continuously generate gas oxygen with a purity 90~ 95% at ambient temperature and the adsorbed nitrogen can be desorpted by decreasing the adsorbed bed pressure resulting cyclical adsorption desorption operation. Area: 900m2 Oxygen purity: 90 ~ 95% Oxygen pressure: 1.2 Mpa Oxyge output: 100~10000NM3 / h Installed Capcity: 405KW£»380V 50Hz.
This oxygen and nitrogen generation system uses pressure swing adsorption principles at normal temperatures, along with clean, compressed air as the raw material, and a carbon molecular sieve as the adsorbent. Due to different adsorption of oxygen and nitrogen onto the carbon molecular sieve surface as well as different diffusion rates through the open or closed program control valve, separation of the two gasses is achieved, and nitrogen of required purity is produced.
The system vaporizes liquid ammonia, and heats it with a catalyst until decomposition occurs, creating a mixture of gas consisting of 75% hydrogen and 25% nitrogen. Based on the principle that the molecular sieve adsorbs ammonia and water at different temperatures, high purity gas is produced by heat regenerating through the mixture working at normal temperature.Hydrogen production 5-500nm3/h Impurity oxygen 2ppm Residual ammonia 3ppm Dew point -65°c Working pressure 0.05-0.2mpa
Eak sun hours for various geographical areas is listed in the above section. Solar panels can be wired in series or in parallel to increase voltage or amperage respectively, and they can be wired both in series and in parallel to increase both volts and amps. Series wiring refers to connecting the positive terminal of one panel to the negative terminal of another. The resulting outer positive and negative terminals will produce voltage the sum of the two panels, but the amperage stays the same as one panel. So two 12 volt/3.5 amp panels wired in series produces 24 volts at 3.5 amps. Four of these wired in series would produce 48 volts at 3.5 amps. Parallel wiring refers to connecting positive terminals to positive terminals and negative to negative. The result is that voltage stays the same, but amperage becomes the sum of the number of panels. So two 12 volt/3.5 amp panels wired in parallel would produce 12 volts at 7 amps. Four panels would produce 12 volts at 14 amps.
Methanol is converted to co and h2 with the action of the catalyst; -co and h2o are converted to co2 and h2 with the action of the catalyst; -co2 and trace co are separated from the decomposed gases by psa technology, and high purity of h2 is generated.
This separation process occurs in an adsorption tower and is advantageous in its low cost, low capacity, minimal maintenance requirements and user-friendly interface. The h2 purifying system removes oxygen from hydrogen via a catalyst to obtain high purity h2 after adsorption and drying through the dust filter. The system can remove oxygen down to levels of 1ppm. Through one step of purification, the purity of the hydrogen generated can reach between 99.999~99.9999% and the dew point can be lower than -70°c; through a second purification step, impurities can be , 0.8mpa H2 purity % >98-99.999% Dew point , -60°c Oxygen content , 1ppm
Introduction: Hydrogen electrolyte and oxygen electrolyte circulate separately, hydrogen electrolyte pumps into hydrogen fuel cell directly and oxygen electrolyte pumps into oxygen cell directly, and therefore gets higher purity of hydrogen and oxygen gas. Specifications: O2 purity % >99.5 Power consumption (dc) < 4.5 kw.H/m3h2 Electrolyte 30% koh Work pressure 0.5-5.0mpa
O2/N2 is a Air separation Plant i.e.cryogenics plant In different size, requires 2 nos.40' container for each plant
Hydrogen cylinders
The IPL hand piece delivers high intensity pulses of broadband light that is different from the narrow band light of lasers. IPL, which stand for intensed pulsed light, is non-ablative meaning that is does not damage the surface of the skin. The intense light is delivered to the deeper parts of the skin (dermis) and leaves the superficial aspect of the skin (epidermis) untouched. There are different versions of IPL available on the market that target different structures in the skin. The PhotoDerm VR targets vascular lesions such as spider veins and vascular birthmarks. The PhotoDerm SR targets pigmented lesions such as melasma and age spots. The PhotoDerm HR and Epilight target hair. The thermal effect of IPL also causes production of new collagen, leading to improvement in wrinkles.
Feature 1. Removal: Whelk, macula, follicuitis etc. 2. Improvement: Coarse pore, flabby skin, thin wrinkle, gray complexion. 3. Improve facial nerve anaesthesia; Relieve pressure; Improve sleeping. 4. Dispel fleck, sunburn, age pigment etc. 5. Rejuvenate any burn, blain or pigmentation caused by high energy from IPL or laser treatment. 6. Modulation: Maladjusted incretion, Ovary Maintained, breast lifting. Special Feature of the Phototherapy skin care and rejuvenation device(The Reason for Choosing This PDT Machine ): 1. Fit for any skin with 100% safety, no hurt to the skin and cell, no side effect. 2. Simple operation, no need of professional training 3. No special nursing and normal make-up after treatment. 4. Strong energy and density, steady capability, longer continued working time and lifetime. 5. One equipment with two different lights(red and blue), the keys for two lights can be easily switched, Control of the up-down pole for easy operation 6. Bigger area irradiation, arc design of the light head is suitable for the character of face. Light source PDT light Output wave Red 630nm; Blue 470nm; Yellow: 590nm Voltage 220V110V/15A 50Hz(60Hz) Power 25W Net Weight 7KG Size 32cm *21cm *7.5cm Gross Weight 9KG Dimension 40*28*15cm
Specific Description: . Wavelength of 430nm can remove abnormal tiny blood vessel (angiotelectasia). As you know, angiotelectasia is abnormal tiny blood vessel. When the photon shine our skin, it shut the abnormal tiny blood vessel. Its ok. . Wavelength of 530nm can remove many kinds of spots. When the photon shine our skin, The spots will more and more light. . Wavelength of 560nm could make our skin more glossy, more white and hardly wrinkle through the photon. When the photon shine our skin, it stimulate collagen to grow and make elastic fibers to rearrange. IPL could cure the acne. The photon could kill the bacillus that result in acne. . Wavelength of 640nm is a depilatory tool. The photon is shining, the same time, it is destroying the hair follicle. When the hair follicle is destroyed, the destroyed hair follicle will never grow hair from then. . Wavelength of 690nm can make breast bigger and bigger. It could massage breast. Technical Specifications: Optical Source Strong Pulse Light Multi--band hand--piece 430nm/530nm/560nm/640nm/690nm Energy density 0-50J/cm2 Pulse number 1-6 Power 1000W Transmission system Sapphire crystal light-transmitting system Cooling system semiconductor+ water+wind+cooling gel Cooling temperature 0 -4o C Spot size 13*30mm2 Size 35cmí- 58cmí- 34cm Net weight 25kg Dimension 70cmí- 42cmí- 40cm Gross weight 32kg
Product Description Vacuum and ultrasonic cellulite reduction cavitation Reduce cellulite and loss weight promptly Skin tighten and body shape I. Applied range of the Vacuum and ultrasonic cellulite reduction cavitation: 1. Dissolve fat, shape and slim body 2. Tighten skin and enhance the skin elasticity 3. Promote flexibility of muscle 4. Improve orange peel organization II. Feature of the vacuum and ultrasonic cellulite reduction cavitation: 1. Color LCD in large touch screen 2. Four different types of strong sound wave fat dissolving heads: M80 (40KHz) explode FAT M50 (1MHz) explode FAT 4X explode FAT Vacuum explode FAT 3. The professional IC card manages function III Advantage of the Vacuum and ultrasonic cellulite reduction cavitation: 1. No side effects, good result and no rebounding phenomenon 2. Non-invasive treatment 3. No blooding, tumidness and bruise 4. Free operate, non- anesthetic 5. Woundless, not influence normal working and living IV. Specifications of the of the Vacuum and ultrasonic cellulite reduction cavitation Vacuum pressure: 0.1MPa Voltage: 110AC/220AC Power: í_ 350W Frequency: 1MHz / 80KHz / 40KHz Shell material: Stainless steel Weight: 40KG Size: 40cmX57cmX125cm V. Theory of the of the Vacuum and ultrasonic cellulite reduction cavitation Super sound wave takes implosion effect on fluid, namely, microvoids are formed in liquid by wave inflation and compression. The air and steam in these voids take positive pressure effect on liquid molecule in compression period while take negative pressure effect in inflation period. Cohesion exists in the liquid or biological tissue, the cohesive force is strong under low density in fat cells, and the low negative pressure can generate inter-space, physically called "Cavitation". The implosion can enhance the molecular motion to a high level, then result in rupture of fat cells. Gross Weight: 60KG Dimension: 130cmX70cmX50cm
Product Description Cavitation slimming beauty equipment model s30 Cavitation vacuum Cavitation weight lose slimming machine Cavitation slimming machine Ultrasonic body shape Applications: 1. Promote tissue metabolism 2. Tighten skin and enhance skin elasticity 3. Fat dissolving 4. Body shaping 5. Cellulite reduction 6. Weight loss 7. Slimming Parameters of slimming machine s-30: 2 Handles Voltage: AC110V-AC230V, Power: 0.5-25W/cm2; Physical techniques: Mechanical energy; Vacuum negative pressure; Optical fiber; Ultrasonic wave and strong sound wave; Load moment: 5000 G/CM; Vacuum negative pressure: > 500MBAR; Optical Fiber: < 5mW; Frequency: 40KHz/1Khz; , . Controller: 8.4inches color touch screen Weight: 15KG Dimensions: 42*44*28cm Advantages: 1. Easy to operate, fit for home use and in Salon 2. One year warranty 3. Outstanding effect 4. Short delivery time 5.1 year warranty Gross Weight: 20KG Dimensions: 50*50*38cm
Beauty face lift RF weight loss equipment with CE(HT200) Functions: 1. Effectively remove all kinds of wrinkle on the face and body. Such as look-up wrinkle, glabellum wrinkle, channel wrinkle around the rose and lips, wrinkle at the former ears, down eyelid wrinkle, neck wrinkle. 2. Treatment for cellulite and striate gravid arum. 3. Shape the body: Arm, thigh, abdomen of post partum, promote and tight the waist. Shape back contour, belly contour, buttocks and legs contour 4. Tighten loose or sagging skin: Promote and tighten the forehead, eye-around, face and neck; Remove the double chin. 5. Skin rejuvenation and care; Improve the orange-peel like tissue on the body. 6. Whelk and scars removal shrink the pore. 7. Weight-losing and slimming 8. Breast lifting Feature: 1. Bipolar machine, safe to the skin, no hurt, no burn, no pain and scar left 2. It is unnecessary to make operation, do treatment in a short time. 3. The treatment time is short (20 to 40 minutes). After treatment, you could return to work or make up immediately. 4. High security: There is a smart cooling system to control the released speed of RF energy so as to protect the skin from burn 5. Take effect instantaneously: Only one time treatment, your skin will look like tender and glossy. 6. Long-time effect: After a course of treatment, the effects could last 3-5 years. Characters: 1. Collagen renewal: The RF energy could be reached the deep layers of skin, stimulating the collagen structure to renew. It makes the face lifting. 2. Favorable Bipolar Radio frequency and good penetration to 5-15mm. Full range of treatment and great result 3. Continual contact cooling in the range of 60-70 to make the treatment more comfortable and effective without epidermal damage 4. RF machine have two gun head, the big one is for body, the small one is for face, if you want to make the face lifting. Perhaps it use 20-40 minute, when you feel very hot, congratulation that you achieve good results 5. Great safety: The equipment has cooling system. Not hurt skin very safety. Technical parameter: RF output power: 1000 W Probe: Bipolar RF power(PWM) (intermittence gives off heat): 1-20J Operative Interface: 8.4 inch True color LCD digital touch screen Treatment Head: Plug head RF frequency: 10MHz RF delay: 50ms-1000ms(adjustable) Interval: 0.25s-2.00s(adjustable) Cooling system: Wind cooling+ water cooling+ semiconductor Refrigeration: - 4 --0 Dimension : 43cm*38cm*105cm Net Weight: 38kg Voltage: 220V/110V/15A 50Hz(60Hz) Dimension : 110*52*50 cm Gross Weight: 55kg
Product description Ipl is internationally called intense pulsed light mainly for skin rejuvenation, hair removal, vascular lesions, pigmentations, acnes treatment, pore shrinking, freckles and wrinkles reduction, which is a kink of high qualiified and perfessional machine for skin treatment. Main technical features: Stardard handpiece: collocated sr 560-1200nm and hr695-1200nm Light spot size: 8*34mm or 10*50mm Power: 10-60j Pulse duration: 1-10ms Pulse delay: 1-99ms Pulse number: 2-6pcs Discharge time: 1s/2s/3s/4s Net weight: 60kg Power supply: 110v/220v Wooden packig Net weight:50kg Dimensions40x45x150cm (attached treatmen head)
Ipl hair removal (ipl-z medical model) Product description Ipl is internationally called intense pulsed light mainly for skin rejuvenation, hair removal, vascular lesions, pigmentations, acnes treatment, pore shrinking, freckles and wrinkles reduction, which is a kink of high qualiified and perfessional machine for skin treatment. Main technical features: Stardard handpiece: collocated sr 560-1200nm and hr695-1200nm Light spot size: 8*34mm or 10*50mm Power: 10-60j Pulse duration: 1-10ms Pulse delay: 1-99ms Pulse number: 2-6pcs Discharge time: 1s/2s/3s/4s Net weight: 60kg Power supply: 110v/220v Wooden packing net weight:60kgss Dimnsions:41x58x103cm
Rf radio frequency (rf208) Product description Rf (radio frequency) is special radio frequency wavelength acted onto underskin tissue to stimulate dermis collagen and underskin elasticity fibre swift shrinking, dermis thickness and density enhanced, wrinkles reduced, skin elasticity and luster renewed, meantime, skin gradually come to white, tender and smooth, furtherly, the skin structure and function come to much younger state than before. Therefore, rf system is the best choice for face lifting, skin tightening, skin rejuvenation and deep skin wrinkles removal. Main technical features: Standard handpiece: collocated a, b c and d for face and body Power: 300v Radio frequency wavelength: 1.1hz Control model: big color touch screen. Working mode: unipolar output Dimension: Power: 220v/110v
Beauty equipment : RF hair removal .Oxygen jet, caviation fat reduction, fractional CO2 laser, PDT, foot massager, skin analyzer.
Industrial and medical gases in the state of guj, india .like oxygen, medical oxygen, argon, co2, mixture, da etc...
