PHYSICAL AND CHEMICAL SPECIFICATIONS: Moisture; 2.5% max Lactose; 36.0% min Fat; 26.0% min Protein; 24.0% min Ash; 7.0% max Solubility Index; 1.0 max Titratable Acidity; 0.15 max Color; Cream/White Flavor; Pleasant MICROBIOLOGICAL SPECIFICATIONS: Standard Plate Count; 50000 cfu/g max Coliforms; 10 cfu/g max Staphylococcus; 10 cfu/g max Salmonella; Negative E. Coli; 10 cfu/g max S. Aureus; 10 cfu/g max Yeast & Moulds; 250 cfu/g max Sediment Disc; (/25g)Disc 2 max
PHYSICAL AND CHEMICAL SPECIFICATIONS: Moisture; 2.5% max Lactose; 36.0% min Fat; 26.0% min Protein; 24.0% min Ash; 7.0% max Solubility Index; 1.0 max Titratable Acidity; 0.15 max Color; Cream/White Flavor; Pleasant MICROBIOLOGICAL SPECIFICATIONS: Standard Plate Count; 50000 cfu/g max Coliforms; 10 cfu/g max Staphylococcus; 10 cfu/g max Salmonella; Negative E. Coli; 10 cfu/g max S. Aureus; 10 cfu/g max Yeast & Moulds; 250 cfu/g max Sediment Disc; (/25g)Disc 2 max
General introduction 1)Unsalted Cow Milk Butter 82% (25kg) 2)Creamy yellow to yellowish white 3)Natural milk fragrance. 4)Delicious taste. PHYSICAL AND CHEMICAL ANALYSIS Milkfat 82.0 % min. Moisture 16.0 % max. Nonfat Milk Solids 2.0 % approx. pH 4.5 5.5 Taste and Odour Pleasant, clean, creamy Colour Uniform, pale yellowish MICROBIOLOGICAL ANALYSIS Total Plate Count 30,000 / g max. Coliforms Negative in 0.1 g Salmonella Negative in 25 g Yeast & Mould 100 / g max. Antibiotics Negative
General introduction 1)Unsalted Cow Milk Butter 82% (25kg) 2)Creamy yellow to yellowish white 3)Natural milk fragrance. 4)Delicious taste. PHYSICAL AND CHEMICAL ANALYSIS Milkfat 82.0 % min. Moisture 16.0 % max. Nonfat Milk Solids 2.0 % approx. pH 4.5 5.5 Taste and Odour Pleasant, clean, creamy Colour Uniform, pale yellowish MICROBIOLOGICAL ANALYSIS Total Plate Count 30,000 / g max. Coliforms Negative in 0.1 g Salmonella Negative in 25 g Yeast & Mould 100 / g max. Antibiotics Negative
Fat: 10 - 12% pH Value: 6.8 - 7.2 (can be adjusted) Fineness: +99% Color: Brown, Dark brown (Can be adjusted) Moisture: 5% max Ash content: 12% max Total plate count, Col/g: Max 5000 Col/g Molds, Col/g: Max 50 Yeast, Col/g: Max 50 E. Coli, Col/g: Negative Salmonella, Col/g: Negative Enterobacteriacase, Col/g: negative Coli form, Col/g: Negative Staphylococcus, Col/g: Negative Taste: Nice cocoa taste Smell: A special and nice smell of cocoa Shelf life:2 years from Manufacturer date
Fat: 10 - 12% pH Value: 6.8 - 7.2 (can be adjusted) Fineness: +99% Color: Brown, Dark brown (Can be adjusted) Moisture: 5% max Ash content: 12% max Total plate count, Col/g: Max 5000 Col/g Molds, Col/g: Max 50 Yeast, Col/g: Max 50 E. Coli, Col/g: Negative Salmonella, Col/g: Negative Enterobacteriacase, Col/g: negative Coli form, Col/g: Negative Staphylococcus, Col/g: Negative Taste: Nice cocoa taste Smell: A special and nice smell of cocoa Shelf life:2 years from Manufacturer date
Customized bends, butt weld fittings, forged fittings, flanges, fabricated pipes, outlets (branch connections), fasteners, specialize in 904l pipes & fittings & aisi 4130 (fittings & flanges) , titanium grade 2 tubes , aluminium(industrial raw materials), pipes , tubes, bars, sheets & plates.
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
1>. Desk Calendar with colored changing PU cover. 2>. The color of the PU is more variety without considering the minimum quantity of PU. Paper cover always has the minimum request to the full color printing. For example, 1,000 PCS can be 2-3 different colors of the PU. 3>. The ring is metal with plating. 4>. The dated calendar can be designed by customers.
1>. Cover is colored changing PU. 2>. Magnetic metal closured + metal plate bookmark. 3>. The metal can be engraved with customer's logo or company's name. 4>. Inside is 96 sheets of 80 gsm white or ivory lined paper. The printing can be designed by customers. 5>. FSC Certified paper is also available. 6>. We have more than thousands of PU in stock. So, the threshold of PU minimum requirement is low and can have more variety of color combination. For example, 1,000/2000 PCS can assort 2 and 4 colors combination.
1>. A5 size with 6-holes colored binder. 2>. Dimension of cover is 17.50 X 23.0 CM. Dimension of refill is 14.20 X 20.70 CM. 3>. The color of 6-hole binder is by plating not by spray paint. So, the color look more vivid as well as more durable. Color looks dull and easy to fade away if by spray. 4>. Color of the PU can be matched with the binder. 5>. The internal design/layout and the tab can be customized by the customer. 6>. We have at least more than thousands of colored changing PU in stock . So, customer could select color combination without considering the MOQ of the PU. For example, 1,000 PCS for 2 colors or 2,000 PCS for 4 colors. Low purchasing threshold of the material allows customers more flexibly design the color combination and diversify the market.
PRODUCT INFO Bolo Maka (Ma-Uek) is small and round, approximately 1-2 centimeters in diameter. The tiny outer skin is initially green when immature, but then ripens to a yellow or orange and is covered in a fine layer of prickly hair. The inner pulp has many edible seeds and is also yellow or orange. Bolo maka is tangy and have a tropical, floral taste with a crunchy bite. Bolo maka grow in small clusters on a stout, vining perennial bush that reaches heights of just over one meter. The stems, leaves, and branches are also hairy, much like the fruit's outer skin. Bolo maka can be consumed in both raw and cooked applications. The thin exterior skin is edible once the hairy layer is shaved off and they are popularly eaten raw as an appetizer or snack. Many recipes may call just for the juicy, seedy pulp to add a touch of piquant sweet and sourness in sauces and curries. The fruit can be sliced in half and squeezed to release the inner pulp. Bolo maka is often used as a finishing condiment and paired with nam prik kapi, which is a Thai chili sauce made with shrimp paste and lime. Its sweet and sour flavor profile also compliments curries rich in coconut milk or a simple plate of rice. Bolo maka will keep up to a week when stored in the refrigerator. USES Bolo maka can be consumed in both raw and cooked applications. The thin exterior skin is edible once the hairy layer is shaved off and they are popularly eaten raw as an appetizer or snack. Many recipes may call just for the juicy, seedy pulp to add a touch of piquant sweet and sourness in sauces and curries. The fruit can be sliced in half and squeezed to release the inner pulp. Bolo maka is often used as a finishing condiment and paired with nam prik kapi, which is a Thai chili sauce made with shrimp paste and lime. Its sweet and sour flavor profile also compliments curries rich in coconut milk or a simple plate of rice.Bolo maka will keep up to a week when stored in the refrigerator. SEASONS Bolo maka is available year-round.
Standard ASTM/ASME 240/480,JIS 4305,DIN EN 10088-2 Grade 201,202,301,304,304j1,304l,321,309s,310s,2205,409l,410,410s,420,420j1,420j2,430,439,409l,443,444,etc Package weight 2 -6 ton per coil Thickness(mm) 0.2mm ~ 100mm Width(mm) 100mm ~ 2000mm Length(m) 1~12m specification size1000*2000/L,1219*2438/L,1500*3000/L,1500*6000/L,1800*6000/L,2000*6000/L,2200*6000/L Thickness/width tolerance +/-0.02mm Surface 2B,BA,8KMirror,DrawingHL,NTitanium plating,Etching,Embossing Application Medical equipment/Food industry/ Table-wares/ Construction/Kitchen utensils/Chemical industry Main Features 1.Environmental protection: can effectively reduce environmental pollution. 2.Corrosion resistance: Strong anti-fouling, acid, corrosion, wear resistance, non-radioactive. 3.Surface cleanliness: The product surface is smooth and compact, not easy to be polluted by dust, and has good self-cleanliness. 4.Easy Maintenance: A slight loss is easy to repair.
1) spices like cumin seeds, dry red chilly , cinnamon, cardamom, cloves, star anise , fennel seeds, etc both in raw form and powder form 2) coffee beans from the land of coorg the coffee heaven of india. both in beans and powder form 3)biodegradable areca leaf plates which are exclusive to southern india.
1, Safe working load: 200kg 2, The back board folding angle: 70 3, The thigh board folding angle: 30 4.TR/ATR:0-20 5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless. 6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely. 7, Side rail: 1),Two side rail in each side of bed. 2),It can be automatically locked when raising, and each guardrail can bear more than 50KG. 3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient; 4), Equipped with gas spring for easy operation. 5), The steel structure of the guardrail base is welded on the bed to ensure safety. 6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed. 7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed. 8, Casters 1), The four casters use 125mm center control one. 2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg 3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking. 9, Shank board can be adjusted manually by simple steel support for convenience position. 10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board. 11, There are 1 hook in each side for drainage bag. 12, It equipped with manual CPR for emergency treatment.
Forging, casting & fabrication based finished mechanical items & assemblies from carbon, alloy & stainless steels. hook blocks for eot & mobile cranes, s.g. iron sheaves, boom extension shafts, hydraulic manifolds, hard chrome plated alloy steel pins, clevis, pivot blocks, forged eye, fork & pin for boom, twist locks, guides, pad holding blocks, tube steer axle, crank shafts, connecting rods, torque arms, pull rods, roller assemblies & sprockets, knuckle chains, redler & rivetless chains.
Gum Arabic, E414, CAS no.9000-01-5, a natural gum made of hardened sap taken from two species of the acacia tree. Gum Arabic appears as an off-white to yellowish granular or powder. It is used as food thickeners in food and beverages such as in icing, fillings, chewing gum and other confectionery. Nutritional properties:Enrichment in soluble dietary fibers; Improvement of digestive comfort; Source of prebiotic fiber. As an experienced Gum Arabic manufacturer and supplier, we has been supplying and exporting Gum Arabic for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Gum Arabic Specification ITEMS STANDARD Appearance Off-white to Yellowish Granular or Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle #2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105â??, 5h) 15% Max Solubility Soluble in water, insoluble in ethanol Nitrogen 0.24%- 0.41% Ash 4% Max Insolubles in Acid 0.5% Max Starch Negative Dannin Negative Arsenic (As) 3ppm Max Lead (Pb) 10ppm Max Heavy Metals 40ppm Max E.Coli/ 5g Negative Salmonella/ 10g Negative Total Plate Count 1000 cfu/ g Max Specifications of Acacia Gum Spray-dried Powder : ITEMS STANDARD Appearance White to off-white Powder Odor Own inherent smell, no odor Viscosity ( Brookfield RVT, 25%, 25, Spindle #2, 20rpm, mPa.s) 60- 100 pH 3.5- 6.5 Moisture(105, 4h) 10% Total ash 4% Acid insoluble ash 0.5% Acid insoluble matter 1% Nitrogen 0.24%- 0.41% Starch or dextrin Negative Tannin Negative Arsenic (As) 2 mg/kg Lead (Pb) 3 mg/kg Heavy Metals 20 mg/kg E.coli/ 5g Negative Salmonella spp./ 10g Negative Total Plate Count 5000 cfu/ g