Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.
Pulp wood, timber, round wood logs& poles like oak, teak, casuarina, eucalyptus and malaivembu etc. supply and manufacturers of steel vessels like ms, ss, titanium, molibdynum and inconel etc..
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more.
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more.
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more.
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more.
We are specialized in the sales of full metal scrap such as ac/fridge compressor , H.M.S 1&2,Aluminum Ingots and UBC Scraps Copper wire scrap, Drained Battery Lead scrap in the UK (LONDON).We have all our product fully ready for sales in good quantity and quality also to be shipped out for our buyers.Create a long time business relation with us & save a lot more.
We are looking for buyers for silicon ingot scrap for semiconductor applications. Product Overview Product types: Top & Tail, side pieces, ingot scraps, etc. Ingot size: 12 inch and 8 inch are the mainstream, 6 inch is a little Stock amount: Over 100 tons Product raw material: Ingot for semiconductor use (11N product) Mainly CZ products, small amount of FZ products Product characteristics Doped: Basically phosphorus and boron N type & P type (both available) Resistance value: 1 or more, 5 or more (separate storage) Carbon content: As it is 11N product, the carbon content is in PPM units. All products are inspected (N type/P type, resistance value, visual inspection) Sales method: Approximately 25 tons delivered by container MOQ: 25 tons/month, 1 year continuous contract (Spot trading is also possible, but the unit price will change.) Payment method: 100% advance payment Delivery method: EXW or delivery to a designated port (additional cost required) Unit price: 7USD/kg Submission of quality inspection certificate: Inspection certificate as evidence of the shipped product Documents to be submitted: Shipping judgment slip (X-ray fluorescence analysis data attached) / for each shipment Judgment items:Â Visual check ... No foreign matter, oil, or moisture (excluding identification stickers, fixing tapes, crystal orientation markings, etc.) Weight check ... Matches the slip (within +3kg/-0% per package) Component analysis ... No detection of P (phosphorus) (N.D.) Analysis method: Randomly sample samples from each shipping lot and perform qualitative analysis using X-ray fluorescence. Quantitative analysis is performed on lots that detect P (phosphorus) spectrum during sampling inspection. Basically, it can be exported to the whole world except for some regions. This product is a semiconductor-level crystal, so it is a product for 100% remelting. When purchasing, you must agree to the pledge.
Product Detail The fully automatic plating line is improved on the basis of the traditional plating line. It realizes the centralized PLC or microcomputer program control in the whole line, which has high working efficiency, fewer operators and less floor space, stable quality, long service life and convenient maintenance. Product Characteristics1.Scientific design, reasonable structure: this machine combines designers more than ten years of design and use experience, so that the production line fully reflects the company's product concept of Economic, efficient, practical in the design and structure.2.Machine Material selection Chrome Machine: Storage tank, working tank are made of TA2 material with a long life and no leakage. Anode uses two forms of hanging and rotating column. And it is automatic positioning. Anode can adopt platinum titanium anode and lead-antimony alloys. The liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage. Copper Machine: ANODE can adopt two forms of hanging column and rotating column; its automatic positioning; the new type titanium filter improves the products filtering and sealing effects; titanium (TA2) heating pipe and temperature control system; Japanese Yiweiqi additive pump has high precision and long service life; the storage tank is supported by stiffening rib and sealed by fixing edge.3.The electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
Product Detail: The fully automatic plating line is improved on the basis of the traditional plating line. It realizes the centralized PLC or microcomputer program control in the whole line, which has high working efficiency, fewer operators and less floor space, stable quality, long service life and convenient maintenance. Product Characteristics: 1.Scientific design, reasonable structure: this machine combines designersâ?? more than ten years of design and use experience, so that the production line fully reflects the companys product concept of Economic, efficient, practical in the design and structure. 2.Machine Material SelectionChrome Machine: Storage tank, working tank are made of TA2 material with a long life and no leakage. Anode uses two forms of hanging and rotating column. And it is automatic positioning. Anode can adopt platinum titanium anode and lead-antimony alloys. The liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage.Copper Machine: ANODE can adopt two forms of hanging column and rotating column; its automatic positioning; the new type titanium filter improves the products filtering and sealing effects; titanium (TA2) heating pipe and temperature control system; Japanese Yiweiqi additive pump has high precision and long service life; the storage tank is supported by stiffening rib and sealed by fixing edge. 3.The electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
JOEO Salt spray testing equipment Produce artwork with salt spray chambers heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life is 3-5 years higher than ordinary stainless steel heating tube. Cover is made of 5MM imported transparent (Germany YLIS) acrylic sheet. It has fine workmanship, beautiful appearance and high transparency.
Steel Product Different types of raw steel products are necessary for a host of different industries. And they are important commodities related to the national economy and people's livelihood. HUARO Steel is leading in steel products manufacturing. High-quality steel products we supply include steel slab, steel billet, steel bloom, hot rolled steel, and cold rolled steel. Steel Making Raw Material Steel is a kind of alloy, which is made of iron and carbon.The carbon content is typically less than 1 or 2 percent. Manganese, silicon, phosphorus, sulfur, and oxygen content is even less. Nonferrous Metals Huaro also focuses on trading with other metal raw material, such as copper cathode aluminum ingot etc. These raw materials are the mostly needed industrial raw material in China. Widely applied in the Electricity Machinery Construction and Automotive industry.
Its main benefits are: Itf+s the best extender of titanium dioxide with excellent opacity that can improve efficiency and cut costs by partly replacing titanium dioxide; It can easily disperse in water based systems; It offers superfine particle and with excellent anti-settling property; It is inert to most acids and alkaline at ambient temperature and offers good anticorrosive capabilities. Typical physical properties: item gb-ck95 Brightness (t457) 93.5% min Particle size (0-2micron) % 80+/-2 Particle size (0-10micron) 100% Refractivity 1.62 Screen residue (325 mesh %) 0.005 max Oil absorbency (g/100g) 60+/-5 Dispersion (micron) 50 max Ph 5.5-7.0 Bulk density (kg/m3) 330 Specific gravity (kg/m3) 2600 Moisture (%) 0.8 max Typical chemical properties: Sio2(%) 52+/-2 Al2o3 (%) 45+/-2 Fe2o3 (%) 0.50max 25kg plastic bag
Ferro Vanadium HSG Metal has ferro vanadium for sale! Get the latest ferro vanadium price! Ferro Vanadium is typically manufactured from Vanadium sludge (or magnetite ore with titanium content, processed for pig iron). Vanadium concentration of our ferro vanadium: from 40% to 80%. Sizes of ferro vanadium powder: 10-50mm/60-325mesh/80-270mesh & custom size Color: Silver Gray/Gray If you are looking for reliable ferro vanadium producers, HSG Metal is definitely your ideal choice. Get to know our ferro vanadium specification below. Contact us now and get ferro vanadium price today!
Duced through delamination, calcination and classification. The well-controlled processes ensure the gb series have no coarse particles and maintains an absolute minimum of 325 mesh ioxide with excellent opacity that can Improve efficiency and cut costs by partly replacing titanium dioxide; Screen residue (325 mesh %)0.01max0.01max Oil absorbency (g/100g)35+/-550+/-5 Dispersion (micron)55max50max Ph5.5-7.05.5-7.0 Bulk density (kg/m3)600500 Specific gravity (kg/m3)26002600 Moisture (%)0.5max0.5max 3. Typical chemical properties Sio2(%)al2o3(%)fe2o3(%)tio2(%)cao(%)mgo(%)cuo(%)k2o(%)na2o(%)mno(%) 52+/-245+/-20.50max1.5max0.4max0.2max0.004max0.05max0.15max0.004max 25kg plastic bag
Product Introduction Engravured cylinder making Nickel plating machine used to plating layer of nickel on the cylinder for perfect copper plating.Gravure Plating equipment adopts half submerged or full immersion plating. Electroplating process, the solution adopts full cycle without emissions. Product Advantage A.Scientific design, reasonable structure.Printing cylinder making production Electropalting Line combines the designer's more than ten years of design and use experience.so that the cylinder making production line fully reflects the company's product concept of Economic, efficient, practical in the design and structure. B.Machine Material Selection. Engravure cylinder electroplating tank is made of TA2 material with a long life and no leakage.electroplating equipment Anode uses two forms of hanging and rotating column.rotogravure cylinder plating liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage. C.Gravure cylinder full automatic electroplating production line electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life.The Rotogravure cylinder making equipment operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
Product Introduction Rotogravure cylinder making Auto electroplating production line is improved on the basis of the traditional engravure cylinder making plating line. Which has high working efficiency and convenient maintenance. Product Advantage A. Scientific design, reasonable structure. Printing cylinder making production Electroplating Line combines the designer's more than ten years of design and use experience.so that the cylinder making production line fully reflects the company's product concept of Economic, efficient, practical in the design and structure. B. Machine Material Selection. Engravure cylinder electroplating tank is made of TA2 material with a long life and no leakage. Electroplating equipment Anode uses two forms of hanging and rotating column. Rotogravure cylinder plating liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage. C. Gravure cylinder full automatic electroplating production line electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The Rotogravure cylinder making equipment operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
PCD/PCBN milling cutters features: The cutting edge adopts laser technology, the cutting edge is sharp, and the cutting is light and suitable for high-speed occasions. PCD of medium grain size has both abrasion resistance and chipping resistance, and excellent overall performance. Diameters of the same specification, different cutting edge lengths. The cutting edge over-center design can be used for axial feed milling similar to drilling. Optimize the groove shape to achieve a higher dynamic balance level. The small R angle and chamfering of the cutting edge effectively increase the durability of the tool. Applications of PCD end mill, cbn end milling, mill for gearbox bottom: Application industry: 3C, automotive, aerospace, etc. Application materials: non-ferrous metals such as aluminum, magnesium, titanium, silicon; fiber materials, insulating materials, plastics, composite materials, etc. Advantages of PCD end mill, cbn end milling, mill for gearbox bottom: Performance advantages of PCD/PCBN milling cutters With ultra-high hardness and super wear resistance; Stable performance and long tool life; High processing efficiency and low cost; High surface finish can be obtained; High conductivity, good toughness. Forming slot milling cutters have been successfully used in slot milling. Multiple slots can be formed and milled at one time, which reduces the use of tools and the number of tool changes, and greatly improves the processing efficiency. The water outlet design in the tool center can effectively reduce the processing heat in the cutting area, reduce tool wear and make the tool have a longer processing life. Pack: Cartons and bubble wrap Delivery Time: Seven to ten days Sample: No free samples are provided FOB Port: Shanghai Qingdao Guangzhou
