How to Choose the Right Heavy Duty Linear Actuator for Your Application Load Capacity: Consider the maximum load your application requires the heavy duty linear actuator 12v to handle. Ensure that the actuator's load capacity is sufficient to support your specific load requirements. It's crucial to leave some margin for safety and account for dynamic loads. Stroke Length: Determine the necessary linear travel distance for your application. Choose an actuator with a stroke length that can accommodate this distance while leaving room for any necessary adjustments or variations in movement. Environmental Considerations: Assess the environmental conditions in your application area. Factors such as temperature, humidity, dust, and exposure to chemicals can impact the actuator's performance and lifespan. Choose an actuator with appropriate sealing, protective coatings, or specialized features to withstand these environmental factors. Mounting and Integration: Consider how the actuator will be mounted and integrated into your system. Look for compatibility with your existing mounting brackets, end fittings, and control interfaces. Consider factors such as installation space requirements, power source compatibility, and the need for additional accessories or customization options. FAQs of Heavy Duty Linear Actuator What is a Heavy Duty Linear Actuator and what are its primary uses? A heavy duty electric actuator is a mechanical device that converts energy into controlled, linear motion. Itâ??s primarily used in industrial applications where high force and durability are required, such as construction machinery, industrial automation, and heavy-duty robotics. How does a Heavy Duty Linear Actuator differ from a standard Linear Actuator? Heavy Duty Linear Actuators are designed to handle higher loads and tougher conditions compared to standard actuators. They are built with stronger materials and often have additional features like overload protection and higher IP ratings for resistance against dust and water. What factors should I consider when choosing a Heavy Duty Linear Actuator? Key factors to consider include the load capacity, speed, stroke length, voltage, and the environmental conditions the actuator will be exposed to. Its also important to consider the actuators duty cycle, which is the amount of time it can operate without overheating. Can Heavy Duty Linear Actuators be customised to fit specific applications? Yes, many manufacturers offer customisation options for their Heavy Duty Linear Actuators. This can include custom stroke lengths, mounting options, and even specific control systems to suit your applications needs.
solids control equipment for sale solids control equipment Solids Control Equipment Solid Control Equipment is specialized machinery used in drilling operations to separate and remove solid particles from drilling fluids, enhancing efficiency and safety. Shale Shaker As the first stage separating equipment of solids control system, shale shaker plays an important role in determining the performance of subsequent separation procedures. Vacuum Drying Shale Shaker Vacuum Suction Shale Shaker is a device that uses vacuum power to separate solids from drilling fluids. Vacuum Degasser A Vacuum Degasser is a device that removes unwanted gases from drilling fluids. Desilter Desilter is a device used to remove fine particles from drilling fluids in oil and gas extraction. Desander Desander is a device used to remove large drill solids from the drilling fluids in the oil and gas industry. Mud Cleaner A Mud Cleaner is a device used to remove contaminants from drilling fluid in oil and gas extraction. Mud Gas Separator Mud Gas Separator is a piece of equipment used in oil and gas drilling to separate gas from drilling mud. Flare Ignition Device Flare Ignition Device is used to ignite excess gas in oil and gas drilling operations. Mud Agitator A Mud Agitator is a device used to stir and mix drilling mud in oil and gas operations. Mud Gun A Mud Gun is a specialized tool used in drilling operations to agitate and re-circulate drilling mud. Mud Mixing Hopper A Mud Mixing Hopper is a specialized device used to mix drilling fluids in oil and gas exploration. Mud Tank A Mud Tank is a large storage container used to hold, mix and circulate drilling mud in drilling operations. Decanter Centrifuge Decanter Centrifuge is a device that uses centrifugal force to separate different components of a liquid, often used in waste processing. Why Is Solid Control Equipment Necessary for Drilling Fluid? î?? Efficiency Efficiency: BZ solids control equipment helps to remove unwanted solids from the drilling fluid, which can increase the drilling speed and reduce the wear on the drilling equipment. Cost-Effective Cost-Effective: By reconditioning and reusing drilling fluid, solid control equipment can significantly reduce the cost of drilling operations. It minimizes waste disposal and the need for fresh drilling fluid.
PDC CORE BIT PDC core drill bits, also known as hollow bits, are tubular multi-toothed instruments embedded with carbide chips. Outfitted with carbide inserts, they efficiently penetrate rock formations of f=1-16 grade. Predominantly utilized in exploration and engineering drilling, PDC Core Bits are distinguished by their broad applicability, encompassing both soft and hard, fragmented, and intact formations. Their use is extensive in sectors such as coal mining, infrastructure, geological surveys, and hydropower projects. Top Tools emerges as a leading force among PDC drill bit manufacturers. With a commitment to innovation and excellence, our PDC bulk drill bits redefine the standards, offering a myriad of benefits that set us apart in the industry. Different Types Of PDC Core Bit For Sale Matrix PDC Core Bit PDC Core Bits are usually used in geological exploration and coalfield mining. Features Of PDC Core Bits PDC Core Bits are made of high grade diamond single crystal or natural diamond particles, which are processed by scientific formula and special technology, and are designed for extra hard rock. PDC Core Bits have high drilling speed and high efficiency, good diameter retention, high wear resistance and longer life. PDC Core Bits can be used in coal mines, highways, railroads, bridges, geological exploration, water conservancy and hydropower, and other construction units. Advantages Of SML PDC Core Bit PDC Core Bit is made of high grade diamond single crystal or natural diamond particles, processed by scientific formula and special technology, which is designed for extra hard rock. PDC Core Bit has the characteristics of high speed and high efficiency, good diameter preservation, high wear resistance and longer life. PDC Core Bits are widely used. From very soft to very hard strata, there are various series of diamond coring bits available to meet the needs of coring under various conditions. The PDC Core Bit produced by SML has smooth drilling, fast speed, high harvest rate, long service life and good overall economic benefits. Good size-preserving effect: SML produces Core Bits with high wear resistance and good size-preserving performance, which enable the cutting teeth to be used efficiently.
UNDERSTANDING THE IMPORTANCE OF INDUSTRIAL DOOR HINGES When it comes to industrial applications, the choice of door hardware plays a crucial role in ensuring safety, security, and efficiency. Among the many options available, steel door hinges have emerged as the go-to choice for industrial doors. In this blog, as a professional door hinges supplier, we will delve into the features and benefits of steel door hinges, exploring why they should be the top choice for businesses seeking reliable and durable door hardware. UNMATCHED DURABILITY AND STRENGTH OF STEEL DOOR HINGES Industrial doors are constantly exposed to heavy traffic, extreme weather conditions, and intense pressure. Therefore, it is essential for businesses to equip their doors with industrial heavy-duty door hinges that can withstand such rigorous demands. Steel door hinges offer unparalleled strength and durability, making them perfect for industrial settings. Their inherent properties enable them to endure heavy loads, resist corrosion, and withstand constant use over extended periods. BENEFITS OF STEEL DOOR HINGES: 1. Enhanced Security: Industrial doors often safeguard valuable assets and sensitive areas. Steel door hinge provides an added layer of security by offering excellent resistance against forced entry, preventing unauthorized access. 2. Stability and Longevity: Thanks to their robust structure and high-grade steel material, these hinges provide exceptional stability to the doors, preventing sagging or misalignment. Their resistance to wear and tear ensures a prolonged lifespan, minimizing the need for frequent replacements or repairs. 1. Uncompromising Quality: JY steel door hinges are crafted using premium-grade steel, ensuring maximum strength and longevity. Every hinge goes through rigorous quality checks to ensure superior performance and reliability. 2. Wide Range of Options: JY offers a comprehensive range of steel door hinges, catering to various industrial needs. Their product lineup includes hinges of different sizes, designs, and finishes, allowing businesses to select the perfect fit for their specific requirements. 3. Ease of Installation: JY understands the importance of swift installation for businesses. Their steel door hinges are designed for easy installation, enabling businesses to quickly replace or upgrade their existing hinges without causing significant downtime. When it comes to choosing door hardware for industrial applications, steel door hinges are the perfect choice. With unrivaled durability, superior security features, and long-term cost savings, they provide an essential foundation for efficient and secure industrial doors. For businesses looking for reliable and top-quality steel door hinges, JY should be their go-to brand. With a vast selection of products that guarantee quality and performance, JY ensures that every industrial door remains secure, functional, and efficient.
IPS-12RS Syringe Pump The IPS-12RS Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12RS offers unparalleled reliability and performance. Key Features: Wide Syringe Compatibility: The IPS-12RS accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12RS ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12RS offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12RS allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12RS offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12RS enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10�°C and 50�°C Storage Temperature: Between -30�°C and 85�°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-14RS Syringe Pump The IPS-14RS Syringe Pump is a sophisticated dual-channel fluid handling system designed to meet the exacting demands of modern laboratories and industrial settings. Offering precise control and advanced features, the IPS-14RS enables efficient and accurate fluid delivery for a variety of applications. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14RS allows for simultaneous operation of different fluids or independent control over each channel. This capability enhances flexibility and efficiency in fluid handling tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14RS accommodates syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This versatility enables users to handle various volumes with ease. Precise Flow Control: The IPS-14RS offers precise control over flow rates, with a range from 17.89 picoliters per minute to 121.51 milliliters per minute. Equipped with a stepper motor and microcontroller featuring Microstep Drive technology, it ensures accurate and consistent fluid delivery. Intuitive Interface: With a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14RS provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing productivity. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptability ensures precise fluid handling for a wide range of applications. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Allows programming of up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Users can save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14R Syringe Pump The IPS-14R Syringe Pump is a cutting-edge dual-channel device designed to provide precise and reliable fluid handling in various applications. With its innovative features and robust construction, the IPS-14R offers versatility and accuracy for demanding fluid delivery processes. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14R allows simultaneous operation of different fluids or separate control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14R accommodates a wide range of syringe types, including glass, plastic, and steel. It supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates with a resolution of 357 nm/ step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
Wrought Iron Fence Supplies A weld wrought iron fence is a type of fencing made from iron that has been heated, hammered, and bent into decorative and functional shapes. It is known for its elegant and ornamental appearance, making it a popular choice for both residential and commercial properties. key features CUSTOM DESIGN All of our residential cast iron fences are custom made to your specifications. STRONG Iron is able to withstand great forces, so it is not easily damaged. DURABLE FINISH The powder coating is baked at 500�º to help ensure a long-lasting, durable finish. Applications Residential Properties: Weld wrought iron fences are a popular choice for residential properties, enhancing the curb appeal of homes while providing security and defining property boundaries. Gardens and Landscaping: They are often used to enclose gardens and landscaped areas, adding an elegant touch to outdoor spaces while protecting plants and flowers from damage. Pool Fencing: Weld wrought iron fences are commonly used as pool safety barriers, helping to prevent unauthorized access to swimming pools while complying with safety regulations. Commercial Buildings: Some commercial properties, such as upscale restaurants, hotels, and boutique shops, use Weld wrought iron fences to create a visually appealing and secure perimeter. Public Parks and Plazas: In urban settings, weld wrought iron fences are used to enclose public parks, plazas, and historic sites, providing an elegant and functional boundary. Historical Preservation: Preservation projects for historical districts and landmarks often incorporate wrought iron fencing to maintain the area's historical character. Schools and Educational Institutions: Some schools and campuses use wrought iron fences around their grounds to enhance security and aesthetics. Churches and Places of Worship: Weld wrought iron fences are often found around churches and places of worship, serving both ornamental and functional purposes. Security Applications: While known for their aesthetics, wrought iron fences can also be used for security purposes in commercial and residential settings when combined with other security measures. Municipal Buildings: Government buildings and municipal properties may use wrought iron fencing to define property boundaries and provide security. Custom Projects: Weld wrought iron fences are highly customizable, and they are often used in unique or custom projects where specific design elements are desired. Balcony Railings: In addition to fencing, wrought iron is used for balcony railings in both residential and commercial buildings, adding safety and style.
IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
Engaging in electronic speed controller for automotive fuel & water pumps, electrical tools for 13 years, we are one of the few manufacturers that focus on electronic speed controller only. We dedicate to designing reliable and powerful electronic speed controller for Hobby products such as RC cars, boats, planes in addition to manufacturing controllers for automotive fuel pump & water pumps, electric tools and drones. Besides the potent E3-the one which was designed for ultimate experience of a 1:8th even 1:6th RC cars, we designed several mild ones. Here I introduce E10 electronic speed controller to you. Even E10 is the mildest one in this product family, with power of 2-4S Li-Po batteries, 140A continuous current, it will generate fierce power. Like the super car, the launch control start will get you excited. There are 12 grade acceleration from 1% to 12%, you can adjust it according to your habit. This electronic speed controller is applicable to both sensored or sensorless brushless motor, we provide bespoke service. What we do is help you achieve your ideas. It supports max motor speed of 240,000RPM. In another word, you must ensure that the motor speed does not exceed 240,000RPM to avoid any damage to both ESC and motor. BEC output is optional, 6.0V or 7.4V, the current is 5A continuous and 10A peak. Which is much more proper? Itâ??s up to your servo specification. An excellent thermal management is essential to a powerful electronic system. With the integration of fan and forged Al heatsink, E10 electronic speed controller maximizes airflow throughout the system, cooling critical component for high-performance and longer runtime. The fan is controlled by ESC according to internal temperature. All configuration can be done on mobile app via Bluetooth, running mode, acceleration, braking force, turbo timing, initial PWM etc. It is ideal for training, you can familiarize function and features step by step. We have designed a series of protection measures including low voltage, over voltage, over temperature, throttle loss, abnormal braking, short circuit protection and so on. You donâ??t need to worry about quality and reliability. You just feel drivability, handling and enjoy the racing, we take care of the rest. Our products have been verified in automotive industries and drones, adopting by clients such as NISSAN, Xpeng, Feilong Auto Component (FLACC), Shenhai Electrical Appliance, Wuhan Cummins, FAW Group, Jingyi Group, Linrui Auto Electrical Appliance, Unicent, and more. Parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. Contact us for detail. If you have any special concept or requirement, we will help you achieve your ideas.
BRAVE 26 TON VERTICAL/HORIZONTAL GAS LOG SPLITTER Price:$1,095.08 SKU:VH1326VN Brand:Brave Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 26 Tons Of Splitting Force Designed for heavy usage - split up to 250 cords per season Split Wood In Horizontal Or Vertical Positions Split smaller logs at comfortable waist height Switch to vertical, save your back & roll large logs into place Heavy Duty 10HP/305cc Briggs & Stratton Vanguard 4-Cycle Engine OHV design for increased efficiency and optimal power transfer 2-Stage, 16 GPM Hydraulic Pump Productive 14 second cycle time with auto-return 5.4 gallon hydraulic system; hydraulic fluid not included 6-Inch High Carbon Steel Splitting Wedge 25" log opening on 3" x 6" reinforced steel beam 26.5-inch working height from ground to top of beam Includes log dislodger High Speed 4.80 x 8 Highway Rated Tires 35 mph maximum towing speed Includes safety chains and 2" hitch coupler Specifications Engine Engine Brand Briggs & Stratton Starting System Recoil Start HP 10 HP CC 305 CCs Fuel Tank Size 0.875 Gallons Low Oil Shutdown Yes Hydraulics Auto Return Yes Hydraulic Filter Yes Hydraulic Oil Included No Hydraulic Reservoir Size 5.4 Cylinder Diameter 4.5 Inches Cylinder Length 24 Inches Cycle Time 14 Seconds Tonnage 26 Tons Wedge Wedge Material Steel Wedge Size 6 Inches Wedge Style 2-way Replaceable Wedge Yes Sharpenable Wedge Yes Log Capacity Max Log Length 25 Inches Towing Towable Yes D.O.T. Lights No Fenders Included Hitch Type 2 Inch Ball Hitch Max Towing Speed 35 MPH Accessories Jack Stands Included Log Cradles Sold Separately Overview Assembly Required Yes Weight 500 Pounds Product Length 81.5 Inches Product Width 40.0 Inches Product Height 36.0 Inches Consumer Warranty 2 Years Commercial Warranty 1 Year
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features FBT-01S is an economic version of ball impact tester, without complicate control and system. It also uses electromagnetic suspension and release, and is equipped with two foot switches too. Sample pneumatic clamping is also the same type and test area as FBT-01. Key Features: 1. Adjustable Impact Height and Various Balls cater to diverse testing scenarios. 2. Electromagnetic Suspension: Employing electromagnetic suspension ensures a controlled and consistent release of the impact ball. 3. Reliable Pneumatic Sample Clamping guarantees that test specimens remain firmly in place throughout testing. 4. User-Friendly Operation: The tester is equipped with two foot switches, simplifying the testing process and enhancing usability. Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa �¦8 mm PU Tubing Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features The FBT-01 Falling Dart Impact Tester is a system with PLC control (maintaining industrial-grade stability) and is operated via an HMI touch screen interface. Key Features: 1. Precision PLC control and user-friendly touch screen interface 2. Adjustable impact height with a variety of available ball options 3. Display of test results in multiple units 4. Utilizes electromagnetic suspension for automatic ball release 5. Secure sample clamping through pneumatic mechanisms 6. Convenient manual and foot switch operation 7. Equipped with a dot matrix micro-printer 8. Option for advanced professional software (available as an add-on) Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa 8 mm PU Pipe Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
