High output demolition engergy upto 25J Speed adjusting switch help different kind of concrete break Super silent design give your hand less vibration Easy oil lubrication system for easy maintenance SDS-MAX chuck system for big Chisel holding LED light indicated when carbon brush worn out MODEL RW-11EH Capacity 490 kg/hour concrete Power Input 1500 Watts Full load impact rate 1300 BPM No Load Speed (r.p.m) 120-250 / min Impact Energy 6-25J Approx Net Weight 11 Kg.
Engine Type 24-valve, DOHC, 60 deg. V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 220.6 (300)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 640 (25.2), U: 767 (30.2), E: 894 (35.2) Dry Weight [kg] * 288-299 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available
Engine Type 24-valve, DOHC, V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 183.8 (250)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 643 (25.3), U: 770 (30.3), E: 897 (35.3) Dry Weight [kg] * 263-273 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available
Engine Type 16Valve DOHC Inline 4 Displacement cm3 1832 Bore x Stroke mm 810 x 889 Max Prop Shaft Output kW ps rmin 846 115 5800 Fuel Induction System Fuel Injection Engine Transom Heightmm inch L 516 203 X 643 253 depending on model Dry Weight kg 175185 Starting System Electric Starter Controls Remote Control or Tiller Handle depending on model Tilt System Power Trim Tilt Lubrication System Wet Sump Digital Network Available
Engine Type In-line 3 Displacement [cm3] 1140 Bore x Stroke [mm] 82.0 x 72.0 Max. Prop Shaft Output [kW (ps)] @r/min 62.5 (85) @5000 Fuel Induction System Carburetor Engine Transom Height[mm (inch)] L: 521 (20.5), Y: 572 (22.5), X: 647 (25.5) Dry Weight [kg] * 113-124 Starting System Electric Starter Controls Remote Control or Tiller Handle Tilt System Power Trim & Tilt or Hydro Tilt Lubrication System Pre-mixed Fuel and Oil
Everflon Fluoropolymer PTFE Micropowder Everflon PTFE (polytetrafluoroethylene) fluoroadditives are finely divided white powders of (PTFE) resin. They are typically added in small quantities to other solid or liquid materials to improve abrasion resistance and lubricity. They are a separate and distinctive product line, very different from standard Everflon PTFE molding and extrusion resins. The differences include a lower molecular weight, smaller particle sizes (2 to 20 m) and different particle shapes. Everflon fluoroadditive powders are designed primarily for use as minority components in mixtures with other solid or liquid materials. Even in small quantities, they can impart some of the high performance properties of PTFE to various host materials.
Seller from the USA Diesel EN590 10ppm FOB - seller option of what port they load from These are the steps to follow 1) I speak with you the buyer 2) buyer signs NCNDA 3) buyer fills out credit application for seller 4) I send in application for buyer directly to seller Also Available Other products and serves: Wholesale Petroleum Marketing Liquid and Dry Bulk Terminal Storage & Services Fuel and Lubricant Distribution & Services Marine Bunkering Service Natural Gas Storage, Marketing & Distribution In the USA Retail Fuel & Convenience Markets Industrial Chemical Supply & Distribution Water Treatment Industry Specialty Chemical Provider
Machine Details:- These machines are equipped with walking foot, needle feed and feed dog, all of which act completely in unison, consequently, the upper or lower sewing material does not slip and also these machines can sew accurately and easily several sheets of heavy-weight materials piles up together. Standard needle gauge: 6.4mm. Automatic lubricating system, smooth and quiet running, easy maintenance. Large hook to assure high efficiency, perfect stitch. These machines are best suited for sewing tents, seats, cushions, bags, leather products, interior furnishings of automobiles, etc.
Product Name: Glycerine Chemical Formula: C3H8O3 CAS Number: 56-81-5 Description: Glycerine, also known as glycerol, is a simple polyol compound widely used in various industries due to its versatile properties. It is a colorless, odorless, and viscous liquid with a sweet taste. Glycerine is hygroscopic, meaning it readily absorbs water from the air, and is miscible with water and alcohol, making it an excellent solvent and humectant. It is derived from both natural sources, such as vegetable oils, and synthetic processes. Appearance: Glycerine typically appears as a clear, colorless, and viscous liquid. Key Features: Humectant: Retains moisture, making it ideal for use in skincare and personal care products. Solvent: Excellent solubility in water and alcohol, making it a good solvent for various applications. Sweetener: Used as a sweetening agent in food and beverages. Lubricant: Provides lubrication in pharmaceutical and cosmetic formulations. Non-Toxic and Biodegradable: Safe for use in food, pharmaceuticals, and personal care products, and environmentally friendly. Applications: Personal Care Products: Skin Creams and Lotions Toothpastes Shampoos and Conditioners Soaps and Body Washes Food and Beverage Industry: Sweeteners in Food Products Preservatives Humectants in Baked Goods Pharmaceutical Industry: Excipients in Medicines Cough Syrups Suppositories Industrial Applications: Antifreeze and Coolants Lubricants Plasticizers Technical Specifications: Purity: 99.5% min Moisture Content: 0.5% max Specific Gravity (25°C): 1.26 - 1.30 pH: 5.5 - 8.0 Heavy Metals: â?¤ 5 ppm Chlorides: â?¤ 10 ppm Packaging: Glycerine is available in various packaging options to suit customer needs: 250 kg HDPE Drums 1250 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. Safety and Regulatory Information: Regulatory Compliance: Complies with USP, EP, BP, and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
EverFlon ®PTFE Dispersion Fine Powder F500 is a soft white polymer made from a water-based dispersion of PTFE. These fine powders have the lowest coefficient of friction, highest heat resistance, chemical resistance, electrical properties and non-stick properties of all fluoropolymers. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. EverFlon ®PTFE F500 is designed for machining at medium and high pressure rates from 100:1 to 600:1. It is particularly suitable for the production of high quality tubes, spiral tubes and wire coatings. This grade is also well suited for post-processing techniques such as flanging, welding, blow molding and turning. Processing suggestion EverFlon ®PTFE F500 is extruded using liquid processing AIDS such as naphtha. During the paste extrusion process, the powder is mixed with a lubricating agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical pre-formed bad material. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through a finishing die under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F500 is usually processed under heat in a step-by-step process into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°(648°F) and produce a non-porous solid PTFE resin.
Fluoron PTFE fine powder F100 is a soft, white polymer made from an aqueous dispersion of PTFE. These fine powders have the lowest friction coefficient of all fluoropolymers and the highest heat resistance, chemical resistance, electrical properties and non-stick properties. It has the unique ability to shear a lubricating paste by extruding it into a bonded fiber matrix with useful structural integrity. Fluoron PTFE F100 is designed for machining with low compression ratios of 10:1 to 300:1. It aims to promote the production of high-quality, low-density tapes Processing suggestion PTFE F100 is extruded using liquid processing AIDS, such as naphtha. During the paste extrusion process, the powder is mixed with a lubrication agent and then compressed under light pressure (1.5-2.0 MPa[220-290 psi]) into a cylindrical preformed blank. The preformed blank is placed into the barrel of the paste extruder, where the composition is passed through the finishing mold under high pressure to produce foaming, tubing or wire coating. After extrusion, the product has a low density but coherent fiber structure. PTFE F100 is usually further processed under heat into solid resin products, such as tubes. Heating is carried out in two steps, either simultaneously with extrusion or separately. Usually the lubricant must be removed first by heating in a temperature range of 100-300°C(212-572°F). A sintering step is then performed to melt the resin above its melting point of approximately 342°C(648°F) and produce a non-porous solid PTFE resin.
HY-1040 Molecular formula H2[AI2O3·mSiO2(OH)2]·nH2O Properties This product is a sub-white powder, which is not dissolved in water, oil or organic solvent. It has strong properties as cation exchange capacity, selective adsorption, hydrophilic property, surface activity and catalysis, It can adsorb and eliminate mineral materials as pitch, neutral colloid, sulfide and olefinenaphthenic acid in lubrication to improve the durability and photo-stability of the lubricant and to increase the ability of corrosion-resisting, and can also absorb and eliminate the pigment, aflatoxin and the carcinogenic substance of 3-4 benzpyrene in vegetable oil, in addition, it has strong ability of oil, in addition, it has strong ability of oil decolorization, high speed of filtering oil and low oil retention of filter cake. Functions�¯�¼?it's widely used in the absorption and refinement of lubricant, paraffin wax, and vaseline, the decolorization of animal and vegetable oil, and the purification of honey, wax and glycerine. Specifications Performance indicators of activated clay Technical requirements for active clay manufacturers' products: 1, appearance: grey or light fine powder. 2, water (2 hr. 105 C) : 12% 3, decoloring force: 154 4, active degree: 180 mol/kg 5, particle size (0.076 mm) : 95% 6, free acid (in - H2SO4) : 0.20% 7, heavy metal content (Pb) : 10 mg/kg 8, arsenic content: 3 mg/kg
NLB - 600 type internal combustion bolt wrench is suitable for railway line sleeper bolt and nut of unscrew and fastening operation. This machine is double sleeve and homework, reverse torque large in 600 n m., can unscrew various corrosion bolt, the working efficiency is high. At the same time change impact torque for static torque, make the operation of rail fastener pressure error is small; Reversing agile, centralized control, convenient operation, it is a lot of multifarious pine, bolt operation indispensable necessary equipment. Parameter Parameter Of NLB-600 railway maintenance rail bolt wrench with petrol engine model NLB-600 the gasoline engine type engine the gasoline engine power rating 4.5KW the engine speed 3600 r/min sleeve quantity 2 sleeve center distance 214 + 0.5 mm tightening torque adjustable 80-170 (N, m) maximum unscrew torque > 600 n, m factory tightening torque 125 N, m work efficiency
XC700 DC 96V Motor Controller for Solar Pumping System XC700 motor controller is mature product designed for solar pumping system. This product was released several years ago, the performance and reliability had been verified and approved by clients and market, it's one of the best sellers in XC motor control product family. Demand on solar pump controller could be diverse, we provide bespoke service for customers. If you have any specific requirement, we help you achieve it. This motor controller for solar pump comes with characteristics: Specification: Model: XC700-SP-96V-1300w Working Voltage: DC24-150V Rated Voltage: 96V Rated Current: 13.5A Working Temp: -30-85 Humidity: 95% Max Dimension: 115*96*39mm (PCBA), 144*170*61mm (set) Protection: Antiflood protection, water lack protection, undervoltage protection, overcurrent short circuit protection, over-temperature protection, motor stall protection and reverse, polarity protection Start/stop and speed control Suitable for applications powered by solar panels, MPPT algorithm inside XC Motor Control has been specializing in motor control since2011, we have considerable expertise in enhancing motor control. The potent combination of hardware and advanced software can keep your device working at its best. Have a try, you are worth a better solution.
We supply paper from many brand and specification We provide best price and quality guarantee Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade. No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides. Perfect for high-quality printing and copying super high whiteness produces outstanding clarity and contrast for all graphics and text precision-cut edges for trouble-free performance user-friendly box design with built-in handle for easy carrying, tear slot perforation for easy access to the reams and label for filing
Engineered from the best pulp selection with high thickness, whiteness, high smoothness, and brightness, sveto copy is a develop masterpiece for all your printing purposes. With new TRUTONE Technology, sveto copy is the ultimate choice for its high performance and print quality, to make the best of your professional portfolios. High Brightness & Whiteness High thickness & Optimized Smoothness Jam Free Performance and Reliability High Opacity- Double Sided Copying, Sheet Size:210mm x 297mm, International Size A4 Quality: 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 152-170 Cobb Test: 27-33 g/m2 27-33 Grade paper : High grade. Sveto copy is the ultimate choice for its high performance and print quality, to make the best of your professional portfolios
PRODUCT DENIER RANGE FILAMENT RANGE LUSTRE Twist Per Meter (TPM) Range Twist Direction Twisted Yarn 50-900 36-288 Semi Dull (SD), Full Dull (FD), Bright (BRT), Cationic (CD) 80-1000 S or Z Twisted DTY is often used in apparel, home textiles, and industrial fabrics due to its excellent elasticity, moisture-wicking properties, and durability. We can offer S Twist or Z Twist yarns depending on the customerâ??s requirement. Twisted Yarns can also be supplied on a soft package on a 170 mm or 230 mm Plastic Perforated tube to be used directly in the dyeing process. These yarns can be supplied with Shrink Wrap Perforated films. We are also offering twisted yarns with Z Twist and high tenacity ( gpd > 4 + 0) that is specially suited for sewing thread applications. Our twisted yarns are appropriately heat set to remove residual shrinkage and snarling and improve run ability.
Designed for reliability and efficiency, it features an automatic movement belt system. Perfect for heat transfer and cloth fusing, with adjustable heat, speed, and pressure for precision and accurate results Automatic Movement: Seamlessly navigate heat transfer and cloth pasting with the machine's automatic movement belt system, ensuring consistent and precise processing. Adjustable Heat: Fine-tune the heat settings to match your requirements, guaranteeing optimal heat transfer and cloth pasting outcomes. Adjustable Movement Speed: Customize the belt's movement speed to align with your production needs, ensuring efficiency and accuracy. Adjustable Pressure: Tailor the pressure settings to achieve uniform adhesion and dependable results for each project. Model No. BS-42 Voltage 220V Fusing Width 450/ 500/ 600/ 1000 mm Max Temperature 0-250�°C Heater Output 4 kw Motor Power 400 w Power Supply 220V, Single Phase Pressure 1.5kgs/cm2 Belt Speed 7mtr/min Fusing Time 5-20sec Machine Weight 170 - 200 kgs Machine Size 1850x 1130x 1280 mm
Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-60 Rated Voltage: 12V/24V Input Current: 7.3A /3.8A Cooling Power: 60 W Size: 200*133*146.6 mm Weight: 2.6Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-150 Rated Voltage: 12V/24V Input Current: 16.5/8.2A Cooling Power: 145 /150 W Size: : 300*160*170 mm Weight: 4.5Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier coolers Part No.: WFF-200 Rated Voltage: 12V/24V Input Current: 22.4 /11.5A Cooling Power: 201/205W Size: 400*180*198 mm Weight: 7.1Kg We can provide OEM design, please do not hesitate to contact us if you have any requirement.
CASHEW KAJU W-180 W-210 W-240 W-320 W-450 W-500 medium size salted and roasted, best price, best quality, Cashew Nuts W180, W210, W240, W320, W450 - Cashew Nuts - Color: White/ Light Ash - Style: Dried - Inspection: SGS - Moisture 7% max - Foreign matter 1%max - Broken 5% max - Nut count: 170 - 220 per kilogram - Out turn: 47 - 53 lbs - Defective: 10% maximum SPECIFICATION OF RAW CASHEW NUTS Grade: White Wholes: W240, W280, W290, W320, W450 W500 Scorched Wholes: SW, SW180, SW210, SW240, SW320, SW450, SW500 S (Splits): LWP(Large white pieces), SWP(Small white pieces) Categories: Dry Fruits, Nuts & Dry Fruits Tags: Buy Cashew, Buy Cashew Nut, Buy Kaju, cashew, Kaju GOA KAJU roasted and salted, namkeen kaju, Crispy Cashew nuts, Freshly packed natural salted whole Cashew nuts, Store in a cool, dry place in an airtight container and preferably refrigerate after opening. Ocean Links Corporation ----Your trust is our power----