We are counted among the well-reputed firm for providing Inlet and Outlet Pipe to our esteemed patrons. Customers can easily get them from us in varied specifications at nominal prices. We are engaged in manufacturing of insert moulded Inner lnlet pipe and Inner Outlet pipe used in inner tank of Electric Water Heater made with high precision from stain-less steel (304 food grade) and temperature resistant engineering plastic. These pipes are also called as dip tubes and plays important role in electrical water. Our dip tubes or inner inlet pipes are designed to direct the incoming cold water to the bottom of heater. Also the inner outlet pipes are designed to fetch hot water from the top of the water heater thereby increasing efficiency of water heater. Highlights 1. Material SS 304 and Nylon 6 2. Leak proof thereby ensuring efficient hot water. 3. Rust proof solution 4. Unbreakable dip tube for water heater an end to maintenance of dip tube. 5.available in customised lengths from 80 mm to 1650mm
Composition of Brucite Brucite is natural magnesium hydroxide, also known as hydrated magnesia. Melting point (dehydration) 340 C, relative density: 2.39, hardness: 2.5, crystal structure: six crystal systems, relative molecular mass: 58.32, solubility: 0.009 g / L. Brucite has a simple chemical composition and its molecular formula is Mg(OH)2. Brucite is a rare high-magnesium mineral in nature. Its theoretical chemical composition is MgO 69.12% and H2O 30.55%. It is often found in brucites produced in nature. Impurities such as Fe, Mn, Zn, Ni, etc., these impurities exist as a homogeneous image, forming a series of continuous or discontinuous solid solution, constituent endmembers: iron brucite (including FeO 10%), manganese brucite (containing MnO 18%), zinc brucite (including ZnO 4%), nickel brucite (including NiO 2.5%). The associated minerals of brucite are serpentine, calcite, dolomite, magnesite, magnesium silicate mineral, periclase, diopside and talc. Use of brucite Brucite is an industrial mineral with special value due to its high content of useful components, low content of harmful impurities, and its unique physicochemical properties, which are different from other types of magnesium-containing mineral raw materials. The main uses of brucite is as below: 1.Flame retardant additives in rubber, plastic and fiber 2.� Flue gas desulfurization 3.Aluminum composite panel 4.Paper industry 5.Agriculture and fertilizer uses 6.Environmental protection field (Wastewater treatment) 7.Magnesia high temperature refractory 8.Fireproof coating 9.Neutralize the treatment agent and adjust the pH value
Soybean Seed 1. Introduction: Soybean seeds, scientifically known as Glycine max, are a valuable leguminous crop renowned for their high protein and oil content. A versatile commodity, soybean seeds find application in various industries, including food processing, animal feed production, and oil extraction. This product information guide provides key details about soybean seeds, covering their characteristics, nutritional value, common uses, and storage considerations. 2. Characteristics: Shape and Size: Soybean seeds are typically small, oval-shaped legumes with a length ranging from 5 to 11 mm. Color: The color of soybean seeds can vary, including shades of yellow, brown, or black, depending on the variety. Texture: The seed coat is smooth, and the seeds have a firm yet easily crushable texture. 3. Nutritional Composition: Protein Content: Soybean seeds are prized for their high protein content, ranging from 35% to 40%. This makes them a valuable source of plant-based protein. Oil Content: Soybeans contain approximately 18% to 20% oil, primarily consisting of polyunsaturated fats. Carbohydrates: The carbohydrate content is moderate, providing energy and dietary fiber. Vitamins and Minerals: Soybeans are rich in vitamins (B-complex) and minerals (iron, calcium, magnesium), contributing to their nutritional profile. 4. Common Uses: Edible Oil Production: Soybean oil is extracted from the seeds and widely used in cooking and food preparation. Animal Feed: Soybean meal, a byproduct of oil extraction, is a valuable protein source in livestock and poultry feed. Food Products: Soybeans are processed into various food products, including tofu, soy milk, soy sauce, and textured vegetable protein (TVP). Industrial Applications: Soybean oil is used in non-food applications such as biodiesel production and as a base for industrial lubricants. 5. Storage Considerations: Moisture Control: Soybean seeds should be stored in a cool, dry place to prevent moisture absorption and reduce the risk of mold growth. Airtight Containers: Packaging should be airtight to maintain freshness and prevent the seeds from becoming rancid due to exposure to air. Temperature: Storage temperatures should ideally be below 25�°C to preserve the quality of the seeds.
Soybeans are an excellent source of carbs, fat, and protein. They contain a wealth of vitamins, minerals, and beneficial plant chemicals including isoflavones. In addition to promoting bone health, soybeans and soy meals may lower the risk of several illnesses, including heart disease, stroke, coronary heart disease (CHD), and some malignancies. One of the most popular oil seeds in the world is soybeans. They have a neutral flavour, which makes them perfect for a variety of culinary uses. A versatile cooking oil that comes from soybeans and is used in a variety of cuisines is soybean oil. India is primarily where we get our supply of soybeans. Each shipment comes with a certificate of origin and a guarantee of quality compliance in addition to competitive costs. We abide by all import-export regulations as we are aware of the recently ruled imports of soybeans into different countries. We can provide any consumer with the ideal quantity thanks to our expanded storage choices. Quality: 1st Grade, 2nd Grade as per client requirement Season: All year round Origin: India Annual production volume: 250000 ton Container capacity: 25 ton Packing: In Bulk or PP Bags p/50kg, 25/50 kg pp bags Packaging Material - New Jute Bags HSN Code: 1201 SPECIFICATION: Impurity: 0.5% min Fat: Max 2.5% Fibre: Max 4.5 % Size: 95% above 5 mm. Moisture: 12% max Foreign matter: 2% max Oil Content: 18% min Protein: 32% min
We are manufacturing shapes of cubes, flats, pipes, fingers, rounds, pillows, and hexagonal. Size may vary from 18 to 50 mm. It is better to choose charcoal shapes according to the customerâ??s request. The main parameter to choose is ash content â?? how much ash is left after charcoal briquettes are burned down. Less ash is better. We are manufacturing briquettes with ash content of 1.8 â?? 2.2%; 2.2 â?? 2.5%; 2.5 â?? 3.0% and 3.0 and up. The most common ash content is 2.2 to 2.5%. There are a lot of variants to choose from. The basic is an inner box (brand box) of 1 to 5 kg packed inside the master box (10 or 20 kg). The inner box can be made with laminating (glossy or doff), with embossing or gold/silver plating. Mostly inner box is made in full color. The master box can be done in full color or black and white only. It is recommended to use a double wall. It is slightly more expensive than a single wall but makes a box much stronger. Forth step is to confirm your payment details and manufacturing schedule. Keep in mind that production can take up to 2 weeks. Plus we need time of 3 days to pack and staff the container. We provide invoices with specification details. By request, we can sign an additional export contract for you to comply with your country requirements
https:**powertoolsequip*com*products*-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum*html https://powertoolsequip.com/products/-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum.html AGRI-FAB HARD-TOP CHIP-N-VAC TOW-BEHIND LAWN VACUUM Price:$886.35 SKU:45-0540 Brand:Agri-Fab Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 208cc Briggs & Stratton Intek Engine Dependable, powerful performance Creates 80 mph suction power Enough power for leaves, pine needles and grass clippings Safety shutoff prevents accidental engine startups Large 26 Bushel/32 Cu Ft Capacity Holds more yard debris - meaning fewer stops Hopper tilts back for easy dumping of yard debris Hard Top Collector Vented to keep dust out of the engine, prevents wear Steel, Side Chipper Hopper Chips branches up to 2" in diameter Converts yard debris into useful mulch Versatile Design Fits over 40 different tractor decks up to 54" wide Templates included (only fits right-side discharge mowers) Additional hose kit (#65640) needed for zero-turn mowers Optional #45-0253 Hose Kit (sold separately) Vacuum debris around shrubs, on patios and under decks Some Assembly Required - Shipped 75% Assembled Specifications Engine Engine Brand Briggs & Stratton Starting System Recoil Start Engine Cycle 4-Cycle CC 208 CCs Fuel Tank Size 1 Gallon Consumer Engine Warranty 1 Year Feed Chute Wood Diameter 2 Inches Feed Type Gravity Number of Blades 2 Blades Replaceable Blades Yes Discharge Chute Bag No Discharge Chute Material Plastic Vacuum Removable Hose No Towing Towable Yes D.O.T. Lights No Fenders Yes Hitch Type ATV/Lawn Mower Hitch Accessories Rear Bagger No Wheels Tire Type Pneumatic Wheels Overview Assembly Required Yes Weight 365 Pounds Product Length 96 Inches Product Width 33 Inches Product Height 62 Inches Consumer Warranty 3 Years Commercial Warranty 90 Days UPC 00052613104705
Metal tube tube CNC plasma cutting machine is mainly used for cutting all metals, including but not limited to aluminium sheet, iron sheet, galvanized (steel) sheet, mild steel, titanium sheet. stainless steel, iron etc. Applies in cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general machinery, engineering machinery,steel structure, shipbuilding and other industries. Features of Metal tube tube CNC plasma cutting machine 1. This plasma cutting machine is used for metal square & round tube tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes' metal sheet. 2. The liner rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching. 3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training. 4. Driving system is LEADSHINE or YASKAWA servo drive (Dual Driver makes it fast), you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time 5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting. 6. Automatic plasma machine Chuck rotary makes work efficiency Parameters of Metal tube tube CNC plasma cutting machine No. Description RB6020T (Length is 6000mm,Diameter is 100-400mm) 1 Working Size 200(Diameter)*6000mm(Length) 2 Z Axis Clearance 150mm (200 And Higher Is Optional) 3 Table Type Chuck rotary (Automatic + Dual Driver) 4 Transmission System Rack Pinion And Hiwin Linear Rails For X/Y 5 Driving System Leadshine Servo motor ( YASKAWA / PANASONIC is optional, also according to your needs and budget.) 6 Max. Cutting Speed 12000mm/Min(different configuration and different material and thickness speed is different) 7 Max. Travelling Speed 30000mm/Min(different configuration speed is different) 8 Working Voltage 380V/3ph(220V/3ph is optional) 9 Plasma Generator Huayuan China and USA power as your requirements 10 Arc Mode FANGLING 11 Output Current 63/100/120A/160A/200A� China (45/65/85/105/125/200A USA) 12 Max. Cutting � Thickness 6/15/18/20/30mm (This is approximate, It also according to power and kinds metal) 13 Operating System JiaoDa fangling FX430A controller (Professional for tube cutting) 14 Working Material Steel, Aluminum, Galvanized Sheet, Titanium Plate,  Platinum Plate  and almost all of the metal� square tube/Circle tube
Drill pipe power tong accessories ZQ203-125 upper flange 19.300-02 Remote Console Accessory FKQ6406 Air pressure regulating valve QTY-L-8 BEARING RING FOR AIR PUMP FOR BOP CONTROL UNIT, BPM, P/N: 9165202002 Diesel generator set accessories ONAN-HDKAL-6.0 generator assembly 185-6920 Logging tool accessories horizontal well TQ-300 bypass cable through the core blowout anti-split screw PT-T-01 Hydraulic tank accessories F-1300 Air bag tee JZR3-L8 LATCH LOCK BOLT NUTS, FOR ELEVATOR, MODEL: DDZ-250 P/N: 130701787 Bushing:Sleeve 2.5 X 3.0 X 2.0 Lg "Scd" 85887 50508-C NUT, HEX-SLTD (UNC-2B) SCREW, CAP-HEX HEAD 50012-18-C5D Turntable input shaft accessories ZJ45 Input shaft sleeve 290/L=58 106.02.30.15 Remote Console Accessory FKQ6406 Copper pipeline U5B/EH Valve Assembly 4 WEB API6 MAN33.373DFC transmission * transfer case rear oil seal Needle bearing M01-1035-010 Canrig Drill pipe tong accessories ZQ203-100 sliding sleeve 0106-05M 53002-06-C PLUG, PIPE-SQ HD (PSDS) Oil well cement BXF-200L(AF) liquid anti-salt fluid Explosion-proof plug and socket\AC500V-16A-14-non-sparking-IP54-WF1-mobile crimping (K) O-RING, 160X5.3, SAFETY CALIPER CYLINDER ASSEMBLY, FOR DRAWWORK, MODEL: JC70DB/JC102TC, MAKE: HONGHUA, P/N: BG80-7 YZ101.55.18 Guard staff MOS superim 110-250Vac/dc T1-3 ND1250M306N coldCooling appliance * air conditioner compressor B508SF02 16YT/GZ-9 Pin: Shot Rotating Link Assembly 10854484-003 NK400E Chassis*MiddleAxle housing Forklift parts CPC30Clutch friction plate �?275/18 teeth Ring: Retainer Internal Wh-950 30181343 WASH PIPE ASSY 3 BORE 30123290 Winch intermediate shaft accessories ZJ-45 Oil resistant rubber seal 106.02.20.41 587-87-0 BEARING HI LO CLUSTER GEAR NARROW, FOR POWER TONG, MODEL: 16-25, MAKE:WEATHERFORD, P/N: 100152-001 Seal Valve Stem MPN# 5287011 Drill pipe hanger accessories ZQ203-100 Nut 010810-01M COMPRESSOR REPAIR KIT; KNO61K03RS0-2; ACCUPART INC.; ENGINE DETROIT DIESEL SERIES 60; PISTON RINGS CONNECTOR EXT PIPE/37" 56501-12-12S SHIM, BEARING RETAINER 109586-5 Explosion-proof lighting switch\220-10A-2-Exdâ?¡BT6-IP54-WF1 60YT GT350E Cooling Appliance*generator brush High pressure elbow and accessoriesPlug valve grease injection head FMC 322654 E4147A05 type impeller winch brake operating mechanismAccessories ZJ50D28 Festool variable diameter right angle joint M12-M10 O-RING REPAIR BOX 6204177 TDS-002262 WASHER,LOCK,BEARING,W26 88603 Global Valve F/Gear Box 7500196 NUT, HEX-SLOTTED 50514-C Hydraulic Release Y15160-00 Power selection box accessories 40-17 plunger 4 1/2" Air cooler FL1.45/4.22 Casing power tong accessories TQ35-13 3/8" Casing Tong Housing Assembly 56.530.00 Winch output shaft accessories ZJ-45 ZJ45 winch shift mechanism 106.03.70.00 35*35 BOP accessoriesFZ35-35 variable diameter ram rubber core 5"-5 1/2" ND3128 Cooling System * Windfan belt tensioner NUT, HEX, SLOTTED 50514-C VOLVOFM12 chassis*Steel plate center screw and cap front
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the workeProduct Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc �?400*�?32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kgr to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
IPS-12RS Syringe Pump The IPS-12RS Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12RS offers unparalleled reliability and performance. Key Features: Wide Syringe Compatibility: The IPS-12RS accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12RS ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12RS offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12RS allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12RS offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12RS enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10�°C and 50�°C Storage Temperature: Between -30�°C and 85�°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-14RS Syringe Pump The IPS-14RS Syringe Pump is a sophisticated dual-channel fluid handling system designed to meet the exacting demands of modern laboratories and industrial settings. Offering precise control and advanced features, the IPS-14RS enables efficient and accurate fluid delivery for a variety of applications. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14RS allows for simultaneous operation of different fluids or independent control over each channel. This capability enhances flexibility and efficiency in fluid handling tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14RS accommodates syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This versatility enables users to handle various volumes with ease. Precise Flow Control: The IPS-14RS offers precise control over flow rates, with a range from 17.89 picoliters per minute to 121.51 milliliters per minute. Equipped with a stepper motor and microcontroller featuring Microstep Drive technology, it ensures accurate and consistent fluid delivery. Intuitive Interface: With a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14RS provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing productivity. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptability ensures precise fluid handling for a wide range of applications. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Allows programming of up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Users can save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14R Syringe Pump The IPS-14R Syringe Pump is a cutting-edge dual-channel device designed to provide precise and reliable fluid handling in various applications. With its innovative features and robust construction, the IPS-14R offers versatility and accuracy for demanding fluid delivery processes. Key Features: Independent Syringe Channels: Featuring two independent syringe channels, the IPS-14R allows simultaneous operation of different fluids or separate control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14R accommodates a wide range of syringe types, including glass, plastic, and steel. It supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates with a resolution of 357 nm/ step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, allowing for fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.6 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
