High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Density 2.181 Melting point 616 Molecular formula Na6O18P6 Molecular weight 611.770 Accurate mass 611.689636 PSA 387.19000 LogP 3.28080 Appearance properties White granular solid Refractive index 1.482 Storage condition Sodium hempetaphosphate should be stored in a cool, ventilated, dry, clean, non-toxic warehouse. It is strictly prohibited to store and transport with toxic goods. stability Sodium hexametaphosphate is colorless transparent glass flake or white granular crystal. The specific gravity of 2.484 (20), easy to dissolve in air, easy to dissolve in water, 973.2 grams per liter of water at 20, 1744 grams per liter of water at 80, the PH value of 1% solution is about 5.5-6.5, insoluble in organic solvents, in the neutral medium, the final product of hydrolysis is phosphates. Moisture absorption is very strong, dew in the air can gradually absorb water and sticky. It can be combined with alkaline earth metal to form soluble double salt, so it has the function of dissolving scale and is a good one Quality manufacturers, service first, customer first, affordable, we have many other types of chemical products, if you need to contact us
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Zeolite is a hydrous alumino-silicate chemical compound with sodium, potassium and barium cations. In general, zeolite has a unique molecular structure, where the silicon atoms are surrounded by 4 oxygen atoms to form a kind of network with a regular pattern. In some places in this network, Silicon atoms are replaced by Aluminum atoms, which are only coordinated with 3 Oxygen atoms. This Aluminum atom only has a charge of 3+, while Silicon itself has a charge of 4+. The presence of aluminum atoms as a whole will cause Zeolite to have a negative charge. This negative charge is what causes Zeolite to be able to bind cations. Zeolite is also often referred to as 'molecular sieve' / 'molecular mesh' (molecular sieve) because zeolite has molecular sized pores so it is able to separate/filter molecules of a certain size. Zeolite has several properties, including: easily releasing water due to heating, but also easily rebinding water molecules in humid air. Because of these properties, zeolite is widely used as a drying agent. Besides that, zeolite also easily releases cations and is replaced with other cations, for example zeolite releases sodium and is replaced by binding calcium or magnesium. This property also causes zeolite to be used to soften water. Zeolite with a certain cavity size is also used as a catalyst to convert alcohol into hydrocarbons so that the alcohol can be used as gasoline.
CAS number 10124-56-8 Molecular formula H7NaO18P6 Molecular weight 503.87 EINECS number 233-343-1 Melting point 616â?? Boiling point 1500â?? Density 2.181 FEMA3027|SODIUMHEXAMETAPHOSPHATE Refractive Index 1.482RTECS No. OY3675000 Storage Conditions Chemicalbook2-8°C Form Solid color White Odor Odorless water solubility So Lubleinwater Insolubleinorganicsolvents stability and stable. Keep it dry. Uses Sodium hmetaphosphate used in meat products, fish sausage, ham, etc., can improve water retention, increase adhesion, prevent fat oxidation; Used in soy sauce, soy sauce can prevent discoloration, increase viscosity, shorten the fermentation period, adjust the taste; Used in fruit drinks, refreshing drinks, can improve juice yield, increase viscosity, inhibit vitamin C decomposition; For ice cream, it can improve the expansion capacity of Chemicalbook, increase the volume, enhance the emulsification to prevent the damage of the paste, improve the taste and color; For dairy products, beverages to prevent gel precipitation; Adding beer can clarify the liquor and prevent turbidity; Used for canned beans, fruits and vegetables, can stabilize natural pigments, protect food color. In addition, sodium hexametaphosphate solution sprayed on cured meat can improve the anticorrosion performance
Caustic soda flakes, also known as sodium hydroxide flakes, are a strong alkaline chemical compound with the chemical formula NaOH. They are solid white flakes that are highly soluble in water and have a wide range of industrial applications due to their strong caustic and alkaline properties. Here are some key points about caustic soda flakes: Chemical Formula: The chemical formula for caustic soda flakes is NaOH, which consists of one sodium (Na+) ion and one hydroxide (OH-) ion. This combination gives the substance its strong alkaline nature. Industrial Applications: Caustic soda flakes are widely used in various industries, including: Chemical Industry: They are used in the production of chemicals, such as detergents, soaps, and various organic compounds. Pulp and Paper Industry: Caustic soda is used to break down lignin in wood during the papermaking process. Textile Industry: It's used in processes like mercerization to improve the properties of cotton fibers. Water Treatment: Caustic soda is used to adjust pH levels in water and wastewater treatment processes. Petroleum Industry: Itâ??s used in petroleum refining for processes like desulfurization and neutralization. Alumina Industry: Caustic soda is a key ingredient in the extraction of alumina from bauxite ore.
Product Description: Encapsulated edible salt, edible salt as the main material(core), monosodium glutamate or taste of disodium nucleotide flavor accessories, use the edible oil as the coating material. It can be widely used in meat product, seasoning and other products, with the unique advantages of anti-moisture, delay release, avoid early reaction with other components. Megafoods encapsulated edible salt series products, the coating material, sodium chloride ratio, mesh and other parameters can be customized according to different process needs. Application: Seasoning,filling, sprinkle snacks with powder, meat product and other products
Midin Botanical Tea With Peppermint (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Peppermint 50 sachets/teabags in DRUM ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Peppermint (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Peppermint 15 Sachets/teabags in Ziplock Bag ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Ginger (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Ginger 50 sachets/teabags in Drum ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Ginger (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Ginger 15 sachets/teabags in Ziplock Bag ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Chamomile (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Chamomile 50 sachets/teabags in Drum ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Chamomile (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Chamomile 15 sachets/teabags in Ziplock Bag ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Midin Botanical Tea With Lemongrass (2.5g per sachet) Ingredients: Midin (Stenochlaena Palustris), Lemongrass 50 sachets/teabags in Drum ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (8.0 kcal/33.2 kJ) per 2.5g Carbohydrate (g) : 63.2 per 100g / 1.6 per 2.5g Protein (g) : 12.4 per 100g / 0.3 per 2.5g Total Fat (g) : 1.6 per 100g / 0.04 per 2.5g Total Sugars (g) : 2.9 per 100g / 0.07 per 2.5g Sodium (g) : 17 per 100g / 0.4 per 2.5g
Midin Botanical Midin Botanical Tea With Lemongrass (2.5g per sachet) Ingredients: Midin (Stenochlaena Palustris), Lemongrass 15 Sachets/teabags In Ziplock Bag ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (8.0 kcal/33.2 kJ) per 2.5g Carbohydrate (g) : 63.2 per 100g / 1.6 per 2.5g Protein (g) : 12.4 per 100g / 0.3 per 2.5g Total Fat (g) : 1.6 per 100g / 0.04 per 2.5g Total Sugars (g) : 2.9 per 100g / 0.07 per 2.5g Sodium (g) : 17 per 100g / 0.4 per 2.5g
Midin Botanical Tea With Blue Pea Flower (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Blue pea flower 50 sachets/teabags in Drum ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Blue Pea Flower (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Blue pea flower 15 Sachets/teabags in Ziplock Bag ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Lemon Verbena (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Lemon verbena 50 sachets/teabags in Drum ($30.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
Midin Botanical Tea With Lemon Verbena (2.0g per sachet) Ingredients: Midin (Stenochlaena Palustris), Lemon verbena 15 sachets/teabags in Ziplock BAG ($10.00) Average composition: Energy : (317 kcal/1327kJ) per 100g / (6.3 kcal/26.5kJ) per 2.0g Carbohydrate (g) : 63.2 per 100g / 1.3 per 2.0g Protein (g) : 12.4 per 100g / 0.2 per 2.0g Total Fat (g) : 1.6 per 100g / 0.03 per 2.0g Total Sugars (g) : 2.9 per 100g / 0.06 per 2.0g Sodium (g) : 17 per 100g / 0.3 per 2.0g
