Elevate your dining decor with our exquisite table runners. A blend of practicality and style, perfect for any occasion.
Revamp your chairs with our trendy chair covers. They protect your chairs and add an aesthetic touch to your furniture.
Enhance the look of your chairs with our decorative chair sashes. They provide a touch of elegance and sophistication to any event.
Protect your clothes from spills with our stylish aprons. Made from durable materials, they are a blend of functionality and style.
Add privacy and style to your bathroom with our fashionable shower curtains. They prevent water spillage and enhance your bathroom's look.
PFA wash bottle that can hold propane Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
Application: Used in a variety of proximal fractures, such as: 1. Sub-trochanteric Fractures; 2. Inter-trochanteric Fractures. Diameter: 9.5-12.0 Length: 170mm; 200mm; 240mm; 320mm; 340mm; 360mm; 380mm; 400mm; 420mm; 440mm Material: Titanium Alloy Matching Locking Bolt: 4.8 25mm - 4.8 85mm Material: Titanium Alloy End Cap Spec: M10 (16,21,40) Material: Titanium Alloy
The vial filling line is suitable for the production of 2-25ml vial liquid injections. It can complete twenty or so processes, including spraying water, ultrasonic rough washing, water flushing of bottle outer wall, two times recycled water flushing of bottle inner wall, air blowing, clean water flushing, two times clean air blowing, blowing of bottle outer wall, preheating, drying, sterilizing and pyrogen removing, cooling, nitrogen pre-filling, filling, nitrogen post-filling, stoppering, capping and so on.
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200 C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. The drip tip and bottle cap are molded at one time, and the open mouth can be autoclaved. Product Specifications: 30/60ml
Product Features: 1. Material: PFA (fusible polytetrafluoroethylene, Teflon) 2. Transparency: translucent 3. High and low temperature resistance: -200C to 260 C 4. Corrosion resistance: resistant to strong acid and alkali, aqua regia, HF, and various organic solvents 5. No leaching out, no sticking samples, it is an excellent container for storing standard substances 6. The blank value of metal elements is low, and the content of lead and uranium is lower than 0.01ppb 7. Nozzle and bottle cap are molded at one time: open can be autoclaved Product Specifications: 1. Narrow mouth: 60/100/250/500ml 2. Wide mouth: 250/300/500/1000ml
Baseball caps.
Ceramic crafts, salamander, frogs, butterflies, ladybugs, bumblebees, turtles, suns, alajeros dolphins fruit bowls with clay plate. jewelry with handmade figures of fruits, flowers, earrings and necklaces palm/straw hats. pi�±atas of different sizes. carved wood art paper mache handicrafts lined with fur (parrots, woven furniture parota wood decorative vases, teak, purple rose all wood clay tableware clay and resin pots tables with epoxy resin. please feel free to ask for other mexican items such as drinks and food.Transportation and shipping therms: fob pay therms c/l
Hot sales friction pen, stick function erasable gel pen with cap and eraser, school and office use, ergonomic soft grip shape design, writing smooth, 0.6/0.7mm tip, Promoting a custom heat-sensitive ergonomic gel pen that is refillable and erasable, with a beautiful writing quality. The pen likely uses friction-based ink, which can be erased using the heat generated by rubbing the eraser on the pen's end over the ink. This pen is designed to be both comfortable and functional for use in both school and office settings. Its heat-sensitive feature may be useful for tasks that require temporary writing, such as taking notes or making corrections on documents. Overall, this pen seems to have several features that make it a desirable writing tool for those looking for a comfortable and practical option.
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 â?? to+260 â??, which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals. Product features 1. Translucent appearance; 2. Temperature resistance -200ï½?+260â??; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2 Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
1 Product Introduction PFA volumetric flasks, also known as soluble polytetrafluoroethylene volumetric flasks or Teflon volumetric flasks, are available in two new options: threaded and plug-in. Currently, there are specifications of 10ml, 25ml, 50ml, 100ml, 250ml, 500ml, and 1000ml available, ensuring product quality. The Teflon series PFA volumetric flask is a transparent long neck bottle with a pear shaped body, making it easy to shake liquids and scrub. The scale lines on each PFA volumetric flask are measured and labeled using an electronic balance of one thousandth. Widely used in trace analysis and isotope analysis experiments such as ICP-MS, ICP-OES, environmental monitoring, semiconductor, polysilicon, photovoltaic electronics, and lithium battery industries. In various testing laboratories, good quality performance will not affect the purity of the test samples. 2ã?? Product performance 1. Good transparency, stability, visible to the naked eye with a smooth surface of the bottle volume, smooth inner and outer walls of the bottle, easy to clean, non adhesive to the sample, and no liquid residue on the inner wall of the bottle mouth; 2. The bottle mouth and cap are well sealed, and the matching threaded cap is tight, so there will be no leakage of liquid when placed upside down or on the side; 3. Resistant to strong acids, alkalis, aqua regia, various laboratory commonly used strong corrosive acids, and various organic solvents; 4. Low background and low precipitation: There is no dissolution or precipitation, and the low background can reach the low detection limit of ICP-MS. It is a container for storing standard materials, strong corrosiveness, and expensive ultra-high purity reagents; 5. High and low temperature resistance: operating at temperatures ranging from -200 to+260 ; 6. Pollution prevention: The value of metal elements is low, and the content of metal elements such as lead and uranium is less than 0.01PPb;
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 to+260 , which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals. Product features 1. Translucent appearance; 2. Temperature resistance -200+260; 3. The pipe and the body are sealed reliably, the sprayability is sensitive, the recovery is fast, and no residue flows out. It can be sprayed into the position of each container and is easy to clean; 4. The nozzle and bottle cap are formed at one time; 5. It can replace the volumetric flask to configure the standard solution: it can be controlled to add sample and water drop by drop.
Product Introduction: We can provide PFA isotope ion exchange columns of different capacities, diameters and lengths. This product is cast with PFA as the material, and the design combines the characteristics of a variety of capillaries and storage containers to meet your needs. The size can be customized according to your experimental requirements. The threaded port design allows users to choose a cap to protect the integrity of the liquid sample in the chromatography. Product Features 1. Repeatability: PFA column tubes can be used multiple times, and the material background is low, which greatly saves experimental costs 2. Visibility: When separating color samples with color, the PFA transparent column can visually see the separation color band 3. Sieve plate: Sieve plates of various particle sizes can be provided, with excellent distribution effect to achieve better separation 4. Large sample loading capacity: can be customized according to your experiment 5. One-time molding, no welding gaps, smooth liquid flow, ensuring durability 6. To prevent the sieve plate from falling off, the bottom can be sharpened according to the flow rate requirements PFA series products: Reagent bottles, wash bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolution tanks, ion exchange columns, crucibles, valves, joints, delivery pipes and other products.
PFA, also known as soluble polytetrafluoroethylene or Teflon, is used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis, and other experiments. The temperature resistance range of PFA bottle washing is very wide, and it can withstand temperatures from -200 â?? to+260 â??, which means it can be used under various experimental conditions without being limited by temperature. The PFA bottle washing tube and body are reliably sealed, with sensitive spraying performance, fast recovery, and no residue left. It can be sprayed into various container positions, making cleaning very convenient. Therefore, using PFA bottle washing can make experiments more convenient. In addition, the nozzle and cap of PFA bottle washing are formed in one go, and its structure is very tight, so there will be no leakage. This is crucial for the accuracy of the experiment. PFA bottle washing can also replace volumetric flasks to prepare standard solutions, which can be controlled to add samples and water dropwise. This means that using PFA bottle washing can conduct experiments more accurately and reduce errors. Suitable for industries such as semiconductors, photovoltaics, biopharmaceuticals, and petrochemicals.
Hydraulic gate valves are designed, manufactured, and tested in accordance with API Spec. 6A to ensure reliable and efficient operation in a variety of applications. The valves feature linear double-acting actuators that guarantee rapid opening in just 30 seconds, providing positive control during operations. Features 1. The integral forging of the valve body, along with the use of carbide alloy on the sealing surface and seats, enhances wear resistance, and corrosion resistance, and extends the service life of the valve. 2. The metal-to-metal sealing between the gate and seat, seat and body, bonnet seal, and stem backseat provides a secure, long-lasting seal. 3. The balancing lower stem of the valve allows it to stay in position even in the absence of hydraulic power, and the double-acting actuator requires hydraulic power to both open and close. Should a failure of hydraulic power occur, this valve will remain in position. 4. Balancing stem that allows the gate to stay in position unless hydraulic power is supplied to the actuator to positively open or close valve 5. Two spring-loaded, pressure-energized, nonelastomeric lip seals provide low-pressure sealing and protect against particle intrusion, while the stem seal design is capable of handling a wide range of pressures, temperatures, and fluids. 6. Stem seal design that covers a wide range of pressures, temperatures, and fluids encountered in wellhead and manifolds service metal-to-metal bonnet seal. 7. A manual locking screw maintains the gate in the closed position without any operating pressure, and socket head cap screws are used to tie down the actuator head flanges, reducing exposure to corrosive environments. Technical Parameters 1. Medium: oil and gas accompanied by sour gas or/and sand 2. Hydraulic actuator: 3,000 psi working pressure and 1/2 NPT connection 3. Rated Working Pressure: 5,000psi 20,000psi 4. Bore Size: all popular 5. Temperature: K ~ U 6. Material Classes: EE ~ HH 7. End connections: flange 8. Product Specification Level: PSL1 ~ PSL3 9. Performance Requirement: PR1, PR2
