Application :- These single core flexible cables are used for wiring in control panels, machines and various electrical installations In small, medium and large industries. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids, etc. and are tough to protect from any mechanical abuses. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 50.00 Sq. mm with ISI mark & 70.0 to 40.0 Sq. mm generally conforming to IS:694 Color Codes : Red, Yellow, Blue, Black, Grey, White, Pink, Green, Violet, Brown, Orange Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
Application :- These multi core flexible cables are used for wiring in control panels, machines and various electrical installations in dry and damp interiors specially under typical industrial environmental conditions. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables offer low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from oils, greases and various chemicals and abrasions, thereby giving long life and electrical safety. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 4.00 Sq. mm in 2 core to 19 cores & 6.00 to 120.00 Sq. mm in 3 core and 4 core. Color Codes : Black and Grey Outer Sheath 2 Core Cables - Red, Black 3 Core Cables - Red, Black & Green (for Earth) 4 Core Cables - Red, Yellow, Blue & Green (for Earth) 5 Core Cables - Red, Yellow, Blue, Black & Grey Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
Application :- This is a premium product of electrical wires from \'JPCL\'. These cables are ideal for wiring in residential and commercial complexes, high-rise buildings, hotels, hospitals, schools, colleges, etc. (where the density of people is high). During a fire, these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside to escape safely. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house only. The insulation is far superior in terms of critical oxygen and temperature index as well as in light transmission and acid gas generation. The skin coloration offers high insulation resistance and long life. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.75, 1.00, 1.50, 2.50, 4.00 and 6.00 Sq. mm Color Codes : Red, Yellow, Blue, Black and Green (For Earthing) Specification : IS:694 Packing : In 90 meter coils in attractive cartons
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
Application :- The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core. Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:1554 (Part-1) Packing : 500 / 1000 meters on drums
430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
VOC REMOVAL BLOCK - Activated Carbon filters effectively Removes Volatile organic compounds (VOC) from water causing irritation in the eyes, nose, and throat, headaches, loss of coordination, and nausea. RO does not provide the adequate removal of VOCs. The adsorption properties of the activated carbon filter suit to remove the carbon-based VOC. No better defense mechanism against VOCs is offered than carbon as active carbon based on coconut shell is microporous and micropores can only house them suitably. To enhance the adsorption capacity of active carbon block we provide modified active carbon with nano alumina. These VOCs Blocks can be manufactured in different size for different applications. Size & Diameter can be customised as per buyer's requirement.
We offer Titanium Ore Rutile Sand & Powder. Parameters: Ti 67% Fe 10% Si 1.0% Mg 7.1% P 0.3% V 0.2% Terms: Minimum Order: 25MT, F.O.B. Price: 1.230 USD per MT, from APAPA, LAGOS, NIGERIA
Spirulina powder organic certified quality produced in very hygienic environment for Human consumption. The protein content is above 63% and well maintained production with very stringent quality check and every lot will be checked beyond our checking with a private checking agency before dispatch. Also, any private label can be done as well. Naturepro Spira farm has the state of the art technology in production of Spirulina.
We at Naturepro Spira Farm produce organic certified Spirulina products and exporters of the Spirulina products to various countries for human consumption. We assure you best quality nutritional supplement from our company. We are glad to send our valuable clients the samples. We can offer best competitive pricing.
Grow Bags for Green Houses : Grade : Low Ec and High Ec grade with chips mixed available. Sizes : 100 X12X10 cms 100X12X15 cms 100X12X18 cms 100X15X12 cms 100X15X18 cms 100X18X12 cms 100X18X15 cms. The planter holes and drain holes as per the requirements of the client. 3 years or 4 years UV treated and 400 to 600 GSM inner black and outer white bags .
Coco peat 5 Kg blocks Grade : Low Ec and High EC Quality : Sieved (6 mm) & Un sieved. Treated : Cano3 treated and normal or untreated. Coco peat blocks with 100% coco peat or coco peat and coco chips mixed blocks as per the customer requirements. Best competitive pricing and timely delivery assured.
Potabee, a potato chip snack made from real potatoes. Potabee is cut precisely with a technology known as V-cut, which makes it crunchier and tastes better. Potabee also contains spices which make it even more delicious. Available in 7 variants: - Roasted Seaweed - BBQ - Grilled chicken - Melted Cheese Steak - Selection Salted Egg - Wagyu Beef steak Selections - Selection Black Truffle size: - 15gr x 60 pcs - 35 gr x 40 pcs - 68 gr x 30 pcs - 120 gr x 18 pcs
Potabee, a potato chip snack made from real potatoes. Potabee is cut precisely with a technology known as V-cut, which makes it crunchier and tastes better. Potabee also contains spices which make it even more delicious. Available in 7 variants: - Roasted Seaweed - BBQ - Grilled chicken - Melted Cheese Steak - Selection Salted Egg - Wagyu Beef steak Selections - Selection Black Truffle size: - 15gr x 60 pcs - 35 gr x 40 pcs - 68 gr x 30 pcs - 120 gr x 18 pcs
Hematite is an iron ore that contains iron in the form of Fe 2 O 3. It is a significant source of iron extraction. Hematite is a mineral that is paramagnetic. As a result, it can be drawn to an external magnetic field. It is an iron oxide with a chemical composition of Fe 2 O 3. It is a common rock-forming mineral found in sedimentary, metamorphic, and igneous rocks at locations throughout the world. Hematite is the most important ore of iron. Hematite is a heavy and usually hard oxide mineral that constitutes the most important iron ore123. It has a chemical formula Fe2O3, indicating that it consists of two iron (Fe) atoms bonded to three oxygen (O) atoms4. Hematite has a high iron content and is one of the most abundant iron ores found on Earth43. It is often found in sedimentary, metamorphic, and igneous rocks4. Hematite is mined in some of the largest mines in the world3. Hematite ore has naturally high iron content suitable for steelmaking5. Features Of Iron Ore: Iron ore is the main raw material that is used in the manufacturing of steel. 97% of the mined iron ore goes in the steel production. Nigeria has rich deposits of Iron Ore and is among the top 8 exporter of iron ore in the world. Please find below our IRON ORE SPECIFICATIONS 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534.835 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844.835 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838.14 Metric Tonnes - Iron Content: 60.8% - S.G: 5.0 Metal analysis of 6.885 Iron Ore QUALITY TEST: Analysis was done using AAS & XRF-ANALYZER and the ELEMENTAL Compositions of the sample(s) are reported below: CERTIFICATE OF ANALYSIS SAMPLE ID IRON ORE SPECIFIC GRAVITY (SG) PARAMETERS Weight % 5.00 TiO2 0.746 Fe2O3 60.885 As2O4