Wanted : Ores Like Lead Zinc And Copper Ore Suppliers and Manufacturers

Steel

We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.

We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity

Fe 62-65%, 62% Min if below or above 62% price be renegotiated SiO2 4.0% max Al2O3 3.0% max P 0.1% max S 0.1% max moisture 8.0% max size: Lump size 50mm max, 10-40mm min 90%

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We are exporter of Bauxite. Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH) Bauxite is used in a lot of industries like the chemical industry, refractory, abrasive, cement, steel, and petrol industry amongst others. In chemical, bauxite along with alumina is used in the manufacturing of aluminium chemicals. In refractory, it is used as a raw material for making several products.

Highly market value all time in demand Highly Qualitative properties Purity will be 99.98%

We are supplier and exporter of Calcined Alumina. Calcined alumina can be used in the polishing of different alumina products(mainly used in middle, fine polishing).It is also widely used in high-class aluminium refractory material, unshaped refractory materials, high aluminium ceramic product and advanced coating, etc, . Item Al2o3 % Na2o % Sio2 % Fe2o3 % D50 A4m 99.8 0.1 0.05 0.02 3.1 Alumina (Al2O3), the industrial Al2O3 is prepared from alumina (Al2O3, 3H2O) and hard alumina, and the Al2O3, which is high in purity, is usually prepared by chemical methods. Al2O3 has many isomorphic crystals, and there are currently more than 10 known types, mainly three types of crystal, namely gamma-al2o3, beta-al2o3, alpha-al2o3.Which structure is different, with different properties in high temperature above 1300 s almost entirely into alpha Al2O3.

Lithium ore IN NATURA for lithium carbonate > Lithium hydroxide > Lithium spodumene The price for lithium carbonate and lithium hydroxide is index SMM minus 5%. Depending on the quantity per month in (MT) tons, the commission can be negotiated can be negotiated with the supplier, origin from Brazil The producer processes the extracted rock into sand for further processing. The quality then corresponds to 99.92 technical or 99.95 battery quality after further processing 99.95 battery quality. Lithium carbonate is supplied in these grades. Lithium hydroxide will reach 56%. Delivery as containerized goods Prices are CIF, require port of destination where the goods are to be delivered to - Buyer specifies quantities - Price renegotiation possible depending on quantity - need concrete information from the buyer about quantity - term of the supply contract, etc. - All questions will be answered by the manufacturer - Please submit your request or questions in writing - Link to the video of one of the manufacturer's stockpiles Offer on lithium (oxide + carbonate) IN NATURA: (the material is considered one of the best in the world!). It is not processed lithium carbonate... it is IN NATURA. 1) CONTENT: Li2CO3: 50-53% / Li2O: 2.0-2.5% / lithium silicate 46-48% (in this lithium silicate there are microparticles of spodumene and other microparticles). 2) GRANULOMETRY: 1.0-100mm (exactly as shown in the video). - QUANTITY: 50.000 - 55.000 MT PER MONTH (X12 MONTHS) - PRICE AND INCOTERM: ca. USD/TON CIF - Destination / Port? - TERMS OF PAYMENT: > Payment with LC: 30% upon order placement before loading, 70% in port before export > Payment with SBLC: also possible with TOP Bank positive credit report NATURA / raw product (ore) = the buyer processes it directly into the desired end product(s), e.g. lithium carbonate, lithium hydroxide, lithium spodumene For larger quantities of lithium ore, the buyer additionally filters out the microparticles of spodumene and other microparticles via his equipment and thus generates a greater profit through additional end products. Minimum purchase per month = 50 MT Info: the formula states that 1 ton yields 500 kg of end product plus rare earths Annual contract possible, price agreement possible directly with the owner / geologist for corresponding purchase quantities. Basic condition is NCNDA, LOI with quantity specification, desired term/delivery contract

Commodity: Manganese Ore Concentrated, Mn >46% to

IRON ORE IN BIG VOLUMES, NIGERIA: 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838 Metric Tonnes - Iron Content: 60.8%�  -� S.G:� 5.0

The supply of tin ore is expected to remain tight in the coming years due to the limited availability of tin resources. Commodity 1 provides Tin ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers�¢?? Tin ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 25 MT/Month 125MT/Month (Lead days) 30 Days 30 Days COMPOSITION ANALYSIS OF THE TIN ORE Metal Percentage Tin 67% Iron 15% Quartz 12% Other metals 6% Tin ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free, but buyers should arrange to pick up a free piece with a courier service.

Commodity 1 provides Manganese ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers Manganese ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 20 MT/Month 1000MT/Month (Lead days) 30 Days 30 Days A shipload of Manganese is available every four months. CHEMICAL COMPOSITION ANALYSIS OF MANGANESE ORE Element Percentage Manganese 40.20% Iron 24.10% Silicon 15.00% Oxygen 15.00% Carbon 3.80% Aluminum 0.80% Calcium 0.40% Magnesium 0.30% Phosphorus 0.10% Sulfur 0.10% Zinc 0.10% Manganese ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free, but buyers should arrange with a courier service of their choice to pick up a free sample.

Commodity 1 provides Lithium ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customers�¢?? lithium ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: LUMS/Chips Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 20 MT/Month 60MT/Month Lithium time (days) 30 Days 30 Days CHEMICAL COMPOSITION ANALYSIS OF LITHIUM ORE Ingredient Percentage Lithium oxide (Li2O) 8% Alumina (Al2O3) 27% Silicon dioxide (SiO2) 64% Other minerals