Wanted : Ldpe Film Scrap Suppliers and Manufacturers

LLDPE Cotton Film Plastic Scrap For Sales MATERIAL LLDPE cotton film CATEGORY LLDPE TYPE cotton film GRADE Yellow color SPECIFICATION LDPE cotton wrap film yellow color,may contains some residue of dirt and cotton.Entering cotton harvest season able to supply more than 20 loads. Origin US LOADING WEIGHT 18 Tons FAS (USD/Ton) 380-550

PVC Agricultural Film Plastic Scrap MATERIAL : PVC Agricultural Film CATEGORY : PVC TYPE : Film GRADE : Light Blue SPECIFICATION : From post-industrial, 100% PVC, no coating ORIGIN : Japan LOADING WEIGHT : 24 Tons FOB (USD/Ton) : 400-700

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Can supply: PLASTIC FILM ROLLS MIX QUALITY (PP, PET, PA etc), MIX COLORS (PRINTED - CLEAR - COLOR METALISED etc) AND MIX SIZE IN BIG BAGS Post industrial. Clean. Can load in 1x40HC container aprox. 26 28 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information. You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

CAN SUPPLY: PP BAGS BALES SCRAP / WASTE. Post commercial. Clean. Can load in 1x40â??HC container approx. 26 â?? 28 MT (�± 10%). Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

PS Regrind Mix Color In Big Bags. Materials are clean. No foreign bodies inside. Post industrial. Can load in 1x40'HC container aprox. 24 MT.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

2Lians can supply Plastic scrap product as below: LDPE Lump White Color Plastic Scrap MATERIAL: LDPE Lump White Color CATEGORY: LDPE TYPE: Lump GRADE: Extrusion SPECIFICATION: Contain some additives as calcium, anti-sleep, antifog, talc. ORIGIN: Israel LOADING WEIGHT: 18 Tons FAS (USD/Ton): 550-700

2Lians can supply Plastic recycled product as below: LDPE Pure Roll Mixed Color Plastic Scrap MATERIAL: LDPE pure roll mixed color CATEGORY: LDPE TYPE: Pure roll GRADE: Mixed color SPECIFICATION: No coating, no EVOH. Other Details : Available in Natural, Milky and Coloured. ORIGIN: US LOADING WEIGHT: 18 Tons CNF (USD/Ton): 900-1200 USD Asian main ports

LDPE Pellet Floor Sweeps Plastic Scrap MATERIAL : LDPE pellet floor sweeps CATEGORY : LDPE TYPE : pellet GRADE : floor sweeps SPECIFICATION : "The material is a floor sweep of a film manufacturer. Some boxes can have mix with small % of masterbatch and PA. The material is all good. MSM FI should be between one and two" ORIGIN : US LOADING WEIGHT : 25 MT CNF (USD/Ton) : 800-1000$ Asia main ports

LDPE Roll And Sheet New Material Plastic Scrap For Sales MATERIAL : LDPE Roll And Sheet New Material CATEGORY : LDPE TYPE : Roll and Sheet GRADE : White SPECIFICATION : new sheet can print anything as customer demand. LDPE 60%, caco3 35%, tio2 5%. thin sheets 0.15mm ~0.2mm thick ORIGIN : Japan LOADING WEIGHT : 20 Tons FOB (USD/Ton): 400-600

Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars

Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.