* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
SQKValves VALVES has extensive experience in manufacturing Trunnion Mounted, Side & Top Entry Ball Valves, both Soft and Metal Seated. Size: 2" up to 56" (DN 50 up to DN 1400) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels,Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel, Titanium Alloy & Carbon Steel with Internal Corrosion Resistant Alloy (CRA) Overlay Design Standard: API 6D,API 608 Pressure / Temperature Rating: ASME B 16.34 Test (Inspection) Standard: API 6D,ISO 5208 API 6FA,ISO 10497, API607, BS 6364 Construction Details: Single / Two / Three Piece Design / Side Entry End Connection: Flanged,Butt-Weld Operator / Actuator: Lever, Gear, Actuator (Pneumatic, Hydraulic, Electro-Hydraulic and Electric Motorised) Special Design Feature also available: Cryogenic Design Subsea Design Stem Extension Single & Double Piston Seat Design Primary Metal and Secondary Soft Seat Design Emergency Seat and Stem sealant Injection
Globe Valves are extensively used through-out the Refineries,Hydrocarbon,Energy and process & the power industries. Size: 2" up to 24" (DN 50 up to DN 600) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel, Titanium Alloy & Carbon Steel with Internal Corrosion Resistant Alloy (CRA) Overlay Design Standard: BS 1873, API 623 Pressure / Temperature Rating: ASME B 16.34 Test (Inspection) Standard: API 598,ISO 5208,BS 6364 Construction Details: Bolted Bonnet / Pressure Seal Bonnet, OS & Y Type Rising Stem End Connection: Flanged,Butt-Weld Operator / Actuator: Handwheel Gear, Actuator (Pneumatic, Hydraulic, Electro-Hydraulic and Electric Motorised) Cryogenic Service: Globe Valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the Customer, down to Cryogenic -196'C. If required by the customer, specific Cryogenic Tests are performed to verify the behaviour of production valves in terms of valve torque, sealing capability, emissions vs the ambient
Gate Valves are used extensively throughout the Refineries,Hydrocarbon,Energy and process industries. Size: 2" up to 88" (DN 50 up to DN 2200) Pressure Rating: ASME 150# to 2500# Materials: Carbon Steels, Low Temperature Carbon Steel, Martensitic Steels, Austenitic Stainless Steel, Duplex Stainless Steels, Super Duplex Stainless Steels, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel, Titanium Alloy & Carbon Steel with Internal Corrosion Resistant Alloy (CRA) Overlay Design Standard: API 600,BS 1414,API 6D Pressure / Temperature Rating: ASME B 16.34 Test (Inspection) Standard: API 598, API 6D, ISO 5208, API6FA, ISO 10497,BS6364 Construction Details: Bolted Bonnet / Pressure Seal Bonnet, OS & Y Type Rising Stem End Connection: Flanged,Butt-Weld Operator / Actuator: Handwheel,Gear,Actuator (Pneumatic, Hydraulic, Electro-Hydraulic and Electric Motorised) Cryogenic Service: Gate Valves can be designed in a special version suitable for cryogenic service. In this case, all the materials and technical features are designed to withstand minimum design temperature required by the Customer, down to Cryogenic -196C. If required by the customer, specific Cryogenic Tests are performed to verify the behaviour of production valves in terms of valve torque, sealing capability, emissions vs the ambient.
Size : 1/2" To 8" (15MM To 200MM) Class/Pressure : #150 To #600 End Connection : Flange, Buttweld, Socket Weld , NPT, Etc Design Standard : API 599, etc Testing Standard : API 598, etc Body Material Steel: Cast Carbon Steel, Cast Alloy Steel, Cast Stainless Steel, Special Material Also Available
* The SQK Hand Wheel Operated Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The SQK Bellow Seal Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The SQK Electric Motor Operated Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The SQK Rising Stem Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The SQK Cryogenic Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to SQK OS & Y Gate Valve. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements