FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH Number of Plates : 11 Dimension (mm) L : 195 Dimension (mm) W : 127 Dimension (mm) H : 200 Dimension (mm) H with T : 220 Battery Weight (KG) : 8.25
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION 1000cc - 1300cc vehicles 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 40 AH No Of Plates : 11 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 8.50
FEATURES Designed for high performance vehicles with extreme high power demands. High cold cranking ability at sub zero temperature. Exceeds original equipments (OE) requirements. PRODUCT APPLICATION 1300cc - 1800cc vehicles Characteristics Instant Start & Excellent Dry Charge Performance. Short pitch design for utmost performance during initial cranking of engine. Special expander used for excellent starting at -15 C. All car batteries are aluminum sealed. Special separators are used to reduce the internal resistance. Minimum water loss during usage of battery. Repeated cranking performance without drop in capacity. High Rate of Discharge characteristics compatible to the cranking current of the vehicle. High Quality Polypropylene containers for long life of battery. Specifications Nominal Voltage : 12V Capacity @ 20 HR : 50 AH No Of Plates : 12 Dimension (mm)L : 232 Dimension (mm)W : 132 Dimension (mm)H : 202 Dimension (mm)H with T : 222 Battery Weight IN KG : 9.20
FEATURES Designed for high performance vehicles with extreme high power demands High cold cranking ability at sub zero temperature Exceeds original equipments (OE) requirements PRODUCT APPLICATION Generator Rickshaw Characteristics Instant Start & Excellent Dry Charge Performance Short pitch design for utmost performance during initial cranking of engine Special expander used for excellent starting at -15 �°C All car batteries are aluminum sealed Special separators are used to reduce the internal resistance Minimum water loss during usage of battery Repeated cranking performance without drop in capacity High Rate of Discharge characteristics compatible to the cranking current of the vehicle High Quality Polypropylene containers for long life of battery Specifications Nominal Voltage : 12V Capacity @ 20 HR : 25 AH Number of Plates : 7 Dimension (mm)L : 195 Dimension (mm)W : 127 Dimension (mm)H : 200 Dimension (mm)H with T : 220 Battery Weight In Kg : 6.22
FEATURES Lead acid open type batteries with liquid electrolyte base Robust tubular plate vented technology High density tubular positive plate design proves more power The cover and container are made from high impact, temperature resistant poly propylene and heat seal welded to prevent electrolyte leakage PRODUCT APPLICATION Electric Fork Lifters Electric Cleaning Machines Electric Tractor Lifting Platforms Characteristics Traction batteries are used to propel battery-powered electric vehicles such as forklifts, electric golf carts, ride-on floor scrubbers, mining locomotives and a whole host of other vehicles V series batteries are well known for their high performance and unsurpassed long service life. Not only forklift manufacturers, but also battery dealers choose our products based on the specific demands of end users in the market JIS is widely accepted by global forklift manufacturers for its quality DIN is popular for tubular type DIN with a long cycle life Improved vent plugs by adding floats inside the plugs which indicate the current level of electrolyte, they are used to secure the electrolyte and replenish the distilled water Specifications Nominal Voltage : 2V Capacity @ 5 HR : 150 AH Dimensions (mm)L : 61 Dimensions (mm)W : 158 Dimensions (mm)H : 380 Dimensions (mm)TH : 413 Battery Weight (Kg) : 9.0
2PZB100 FEATURES Lead acid open type batteries with liquid electrolyte base Robust tubular plate vented technology High density tubular positive plate design proves more power The cover and container are made from high impact, temperature resistant poly propylene and heat seal welded to prevent electrolyte leakage PRODUCT APPLICATION Electric Fork Lifters Electric Cleaning Machines Electric Tractor Lifting Platforms Characteristics Traction batteries are used to propel battery-powered electric vehicles such as forklifts, electric golf carts, ride-on floor scrubbers, mining locomotives and a whole host of other vehicles V series batteries are well known for their high performance and unsurpassed long service life. Not only forklift manufacturers, but also battery dealers choose our products based on the specific demands of end users in the market JIS is widely accepted by global forklift manufacturers for its quality DIN is popular for tubular type DIN with a long cycle life Improved vent plugs by adding floats inside the plugs which indicate the current level of electrolyte, they are used to secure the electrolyte and replenish the distilled water Specifications Nominal Voltage : 2V Capacity @ 5 HR : 100 AH Dimensions (mm)L : 45 Dimensions (mm)W : 158 Dimensions (mm)H : 380 Dimensions (mm)TH : 413 Battery Weight (Kg) : 6.4
2PZB140 FEATURES Lead acid open type batteries with liquid electrolyte base Robust tubular plate vented technology High density tubular positive plate design proves more power The cover and container are made from high impact, temperature resistant poly propylene and heat seal welded to prevent electrolyte leakage PRODUCT APPLICATION Electric Fork Lifters Electric Cleaning Machines Electric Tractor Lifting Platforms Characteristics Traction batteries are used to propel battery-powered electric vehicles such as forklifts, electric golf carts, ride-on floor scrubbers, mining locomotives and a whole host of other vehicles V series batteries are well known for their high performance and unsurpassed long service life. Not only forklift manufacturers, but also battery dealers choose our products based on the specific demands of end users in the market JIS is widely accepted by global forklift manufacturers for its quality DIN is popular for tubular type DIN with a long cycle life Improved vent plugs by adding floats inside the plugs which indicate the current level of electrolyte, they are used to secure the electrolyte and replenish the distilled water Specifications Nominal Voltage : 2V Capacity @ 5 HR : 140 AH Dimensions (mm)L : 45 Dimensions (mm)W : 158 Dimensions (mm)H : 485 Dimensions (mm)TH : 518 Battery Weight (Kg) : 8.8
FEATURES Lead acid open type batteries with liquid electrolyte base Robust tubular plate vented technology High density tubular positive plate design proves more power The cover and container are made from high impact, temperature resistant poly propylene and heat seal welded to prevent electrolyte leakage PRODUCT APPLICATION Electric Fork Lifters Electric Cleaning Machines Electric Tractor Lifting Platforms Characteristics Traction batteries are used to propel battery-powered electric vehicles such as forklifts, electric golf carts, ride-on floor scrubbers, mining locomotives and a whole host of other vehicles V series batteries are well known for their high performance and unsurpassed long service life. Not only forklift manufacturers, but also battery dealers choose our products based on the specific demands of end users in the market JIS is widely accepted by global forklift manufacturers for its quality DIN is popular for tubular type DIN with a long cycle life Improved vent plugs by adding floats inside the plugs which indicate the current level of electrolyte, they are used to secure the electrolyte and replenish the distilled water Specifications Nominal Voltage : 2V Capacity @ 5 HR : 500 AH Dimensions (mm)L : 173 Dimensions (mm)W : 158 Dimensions (mm)H : 380 Dimensions (mm)TH : 413 Battery Weight (Kg) : 28.6
Pakistan Accumulators (Pvt) Ltd is the first company in Pakistan to manufacture of Tubular Plate Flooded Lead Acid Batteries (Deep Cycle, Solar & UPS applications). The production design of this battery is dissimilar to the existing SLI and UPS batteries. It has a Tubular Plate for positive and a thick negative plate for enhancing life of battery.
Pakistan Accumulators (Pvt.) Limited is one step ahead of the market, providing new and advanced products to its customers. The maintenance free concept focuses on the effort to eliminate the evaporation (water loss) inside the battery; therefore no water addition is required for the whole battery life.
Pakistan Accumulators (Pvt.) Limited is the leading company in Pakistan with more than two decades of experience in manufacturing conventional lead acid dry charge batteries (shallow cycle & deep cycle batteries) as per JIS standard. In addition to that, Pakistan Accumulators (Pvt.) Limited is also making popular models of DIN standards.
Pakistan Accumulators (Pvt.) Limited is the leading company in Pakistan with more than two decades of experience in manufacturing conventional lead acid dry charge batteries (shallow cycle & deep cycle batteries) as per JIS standard. In addition to that, Pakistan Accumulators (Pvt.) Limited is also making popular models of DIN standards
Our partner company produces DC regular and quick charging electric vehicle charging stations and central terminals with variable pistol counts, ranging from 20 kW to 800 kW. After experiencing swift adoption in the local market, we are expanding globally. We are prepared to talk about prospects with distributors and investors around the globe.
Can supply: PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade. Post industrial. Materials are bulk. Can load bulk in 1x40' Open Top container approx. 20-24 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
