Jaw crusher.
Stone Impact crusher ,impact breaker is acknowledged in this field for a long time and gives smooth running resulting power economy and higher efficiency. Our Stone Impact Crusher is mainly used to crush many kinds of large, medium, small materials such as rock or stone whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. And The stone impact crusher (impactor) is widely used in hydroelectricity, highway, artificial rock, stone and sand, building material, etc. HENAN HONGJI offers good quality crushers,stone crusher,jaw crusher,impact crusher,VSI crusher, mining crusher machinery. PF impact Crusher: This series of products are applicable for crushing the semi-hard materials and have big throughput and small granularity of materials. Working Principle of Stone Impact Crusher: When the impact crusher works, the motor drives the rotor rotate with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed. The materials from large to small all to be crushed at the impact chamber repeatedly. The process wont stop till the material are crushed to the required size and then discharged from outlet. The main features of stone impact crusher: 1.Connected with locking sleeve assembly. 2.Final product with cubical shape. 3.The blow bar with high chrome. 4.Easy maintenance. Hydraulic or hand opening. 5. Easy maintenance and reliable operation. 6. High reduction ratio and crushing efficiency; 7. No-board connection; The blow bar with high chrome (high chromed blow bar). 8. Impact plate with a special shape. 9. Crushed product with cubical shape. Specifications of Stone Impact Crusher Type Spec. Feeder Opening (mm) Feeding Size (mm) Crushing Capacity (t/h) Motor Power (KW) Weight (T) PF-0607 ¦µ644¡Á740 320¡Á770 100 10-20 30 6 PF-0807 ¦µ850¡Á700 400¡Á730 300 15-30 30-45 8 PF-1008 ¦µ1000¡Á800 400¡Á830 300 30-50 37-55 10 PF-1010 ¦µ1000¡Á1050 400¡Á1080 350 50-80 55-75 12 PF-1210 ¦µ1250¡Á1050 400¡Á1080 350 70-120 110-132 14 PF-1214 ¦µ1250¡Á1400 400¡Á1430 350 130-180 132-160 18.6 PF-1315 ¦µ1320¡Á1500 860¡Á1520 500 160-250 180-260 19 PF-1320 ¦µ1320¡Á2000 860¡Á2030 500 300-350 300-375 24. Standard container, nude packing, can pack as the customers' requirements.
High-efficient cone crusher Application of Hydraulic Cone Crusher: *SMH series hydraulic cone crusher gets to world advanced level, which is designed and made through absorbing world advanced crushing technology. *It is widely used in metallurgical, aggregate, building material industries. It is suitable for crushing varies of hard and above mid hard ores and rocks. Features and Benefits: SMH Series high efficiency Hydraulic Cone Crusher has a better performance compared with other ordinary Hydraulic Cone Crusher. *Reasonable structure, advanced crushing principle and technical data, reliable work and low cost. *Strong crushing ability, high efficiency productivity, high capacity. *Hydraulic system is reliable, provide safe and effective overload protection. *Types of crushing cavity are for wide range of product size requirement. *Use hydraulic adjustment and hydraulic clean cavity setting, much increase automation. *Replace the mantle and concave without any compounds. *A high crushing ratio and production efficiency: The connection of higher turning speed and stroke makes the rated power and passing capacity improved greatly and the crushing ratio and capacity increased. *Less spare part consuming and low operation cost: Advanced crushing principle and technical data, reliable operation and low operation cost. All parts of the crusher have anti-wearing protection, which can make the life time of spare parts increased by 30% and the maintenance costs decreased to the lowest. The crusher avoids the disadvantages of impact crusher like low average crushing ratio, large energy consumption, fast abrasion of hammer, impact plate and lining board. *Between-layer pressuring crushing and better finished product shape: The crusher adopts between-layer pressuring crushing principal and the suited turning speed, not the traditional single particle crushing principal. The special crushing cavity can makes the crusher crush materials selectively, thus the proportion of fine product and products of cubic shape be increased distinctly and products of lump size decreased by a large extent. *Hydraulic protection and hydraulic cavity clearing, high automatization and less stop production and repairing time: the discharge opening adjusted by hydraulic and overload protection makes performance of the crusher increased by a large extent, the maintenance and operation easier, the repairing time shorter; the bidirectional metal releasing hydraulic vat makes slab pass through crushing cavity;the crusher can discharges materials automatically when the hydraulic works under the conditions of iron passing and instantaneous overloading, thus there is no trouble of stopping the crusher to discharge materials by hand. *Thin oil lubrication makes the life time increased: Unique design of thin oil lubrication system prolongs life time of the crusher, high performance and not touchable labyrinth airproof part blocks off the dust and remove the common disorders like the mixture of oil and water in spring cone crusher. *Manifold crushing cavity, flexible application, strong adaptability: It is only need to change fixed cone lining board and movable cone lining board; the type of crushing cavity can be changed from standard coarse cavity to short head fine cavity, which can meet various kinds of need. *Easy maintenance and operation: All parts of SMH Hydraulic Cone Crusher can be assembled, disassembled and repaired from the top and side part, including the fixed cone and movable cone. For the changing no need to disassemble the crusher body and fasten the bolts. Hydraulic motor makes the performance of crusher better. *The crusher can provide customers a higher capacity, better product shape, and easy be operated. Standard container, nude packing, can pack as the customers' requirements.
Cone crusher is widely used in metallurgical industry, building materials industry, construction industry, chemical industry and silicate industry, applicable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of big crushing ratio, high efficiency, large capacity, low cost, easy adjustment, and use economically, etc. The reasonable part selection and structural design extend crushers' usage life, and the final products of uniform particle size reduce the cycle load; the medium to large-sized crusher, adopts the hydraulic clear-cavity system, reduces downtime, and various types of crusher cavity to better adapt to user needs.
Features 1. A large inlet, high crushing chamber which is suitable for materials with high hardness, biger block and less powder; 2. Clearance between impact-plate and plate can be adjust conviniently, which can make effective control of the particle size posible, broken end product is of cubic shape, the grain shape is good; 3. It has compact structure, high machine rigidity, and the rotor has a large inertia; 4. High chrome hammer, impact resistance, abrasion resistance, mechanical wear small, big impact; 5. Using new rotor can increase the impact force; 6. Broken-function is complete, reduction ratio is big, it is of high productivity, low energy consumption, and its overall efficiency is high. 7. Keyless connection, simple structure, easy maintenance, economical and reliable. Technical parameter of impact crusher : Mm to inch conversion: 25.4millimeters=1 inch Model size of rotor (mm) feed opening (mm) max. Feed Size (mm) capacity (t/h) power of Motor (kw) weight (t) Pf1007 ¦µ1000¡Á700 400¡Á730 300 15-30 37 6 Pf1010 ¦µ1000¡Á1050 400¡Á1080 350 50-80 75 12.5 Pf1210 ¦µ1250¡Á1050 400¡Á1080 350 70-130 110 16.5 Pf1214 ¦µ1250¡Á1400 400¡Á1430 350 90-180 132 19 Pf1315 ¦µ1320¡Á1500 860¡Á1520 500 120-250 200 24 Pf1320 ¦µ1320¡Á2000 860¡Á2030 500 160-350 260 27
Features: 1. The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity; 2. It has a big crushing ratio and even grain shape. 3. The gasket type inlet size makes flexible adjustment posible, and it¡¯s reliable, conveinent, and with a big adjustment range, which can greatly enhance the flexibility of the equipments. 4. The lubrication system is safe and reliable, and it¡¯s quite convinient to change components and there will be less maintenance needed. 5. It has a simple structure, and is quite stable and low in operation cost. 6. The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system; 7. The size of outlect is quite adjustable, which can meet requirements of different customers. 8. Low noise, less dust; 9. Simple structure, convinient to repair; stable performance, low operation cost; big crushing ratio. Technical parameter of jaw crusher : Mm to inch conversion: 25.4millimeters=1 inch Model max. Feeding Size (mm) discharge Size (mm) capacity (t/h) motor Power (kw) overall Dimensions (mm) weight (t) Pe400¡Á600 350 40-100 15-60 30 1700¡Á1732¡Á1653 6.5 Pe500¡Á750 425 50-100 50-100 55 2035¡Á1921¡Á2000 10.3 Pe600¡Á900 480 65-160 60-130 75 2290¡Á2206¡Á2370 16.5 Pe750¡Á1060 630 80-140 80-180 110 2620¡Á2302¡Á3110 29 Pe900¡Á1200 750 95-165 140-260 110 3789¡Á2826¡Á3025 54.5 Pe1000¡Á1200 850 195-265 315-550 110 3335¡Á3182¡Á3025 57 Pe1200¡Á1500 1020 150-300 400-800 160-220 4200¡Á3750¡Á3820 100.9
Application of jaw crusher: Jaw crusher is a trusted and reliable brand for its high quality and good manufacturing. It specializes in producing jaw crusher which is widely applied to crush high hardness, mid hardness and soft rocks and ores such as slag, construction materials, marble, etc. The pressure resistance strength is under 200mpa, that is, suitable for primary crush. Each model has a large feed opening for its size and an ideal nip angle, giving smooth material flow, high reduction efficiency and high capacity. Their simple design conceals many advanced features that give easy operation, simple maintenance, long life and a low cost per ton. The structure of jaw crusher: The structure of jaw crusher includes main frame, main axle, roller bearings, eccentric shaft, jaw plates, side plates, toggle mechanism, fly wheels and springs. The features of jaw crusher: 1. Jaw crusher is of various types; 2. Jaw crusher is suitable for crushing maximum, medium and minimum stones; 3. The operating principle of jaw crusher is easy to be operated; 4. The structure of jaw crusher is simple and it is easy to maintain; Operating principle: Jaw crusher uses motor as its power. Through the motors wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
The jaw crusher is drived by motor through belt and belt wheels, which makes the movable jaw plate up and down through eccentric shaft.When the movable jaw comes down, the angle between the fixed jaw plate and the movable jaw plate gets smaller, then the materials can be crushed .When the movable jaw plate rises, the angle becomes lauger and the movable jaw plate leaves the fixed jaw plate with the function of tie bar and spring.At the same time the final products are discharged from the lower outlet of the crushing chamber. Specification This series of products have the advantages of big reduction ratio, even granularity, simple structure, liable operation, easy maintenance, economic operation cost, etc. It is widely used for materials with the max crushing compressive strength not more than 320 mpa in the field of mine, metallurgy, building materials, roads, railways, irrigation, chemical industry, etc.
Features It has the characteristics of novel structure, no-bond connecting, high chrome plate hammer, special impact lining plate and energy saving.The finished product is in cubical shape and the discharge granularities can be adjusted.It simplifies the crushing process. Operating principle Impact crusher is a kind of crushing equipment which uses impact energy to crush maters.When getting into the effective area of hammer plates, due to the high speed of striking, the raw materials are thrown onto the impact equipment which is installed above the rotor.Then the materials are rebounded to the effective area of hammer plates and crushed again in the crushing chamber . At last, when the particles reach to the proper size, they will be discharged from the bottom of the machine. Pf impact crusher series The series of products can deal with the materials with max length below 500mm, and the compressive strength below 350mpa. They have the advantage of greater reduction ratio and the final materials are in cubical shape.
It is also possible to use the high capacity primary impact crusher from our products range for primary and secondary applications. Thanks to the exchangeability of the wearing parts, the extension of machine’s utilization life and handling-convenience is ensured. Further, through the hydraulically open-able case also an ease and rapid maintenance facility is ensured. This product group designed in order to supply you a facile services, is suitable for lifting materials of any hardness.
Jaw crushers series made by henan zhengyi construction machinery co.;ltd has the top quality with competitive price. This series of jaw crusher is mainly used to break materials whose compression strength is less than 320mpa in secondary and coarse crushing. It has the features as follows: high crushing rate, high throughput, even discharged material size, simple structure, reliable performance, easy maintenance, low cost. It has been widely used in mining, metallurgy, building materials, highway, railway and irrigation works. Performance features of jaw crusher: This series of jaw crusher has the fatures of simple struture, reliable performance, easy maintenance. It is mainly used in ore dressing, building materials, road construction, silicate and chemical industry. The maximum compression strength this machine can sustain is 320mpa. Our crusher is mainly used to break all kinds of ore and big block materials in secondary crushing. It is widely used in mining, metallurgy, building materials, highway, railway, irrigation works and chemical industry. The maximum compression strength for the machine is 320mpa. Usage and scope of jaw crusher íí 1. This series of crusher is mainly used in metallurgy, mining, chemical, cement, construction, refractories and ceramics to crush ore and rock with a medium hardness in secondary and fine crushing.íííííííííííí 2. This series of crusher is suitable to crush soft minerals with a compression strength less than 300mpa, the maximum size of the materials should not be bigger than that in the technical data form.
The impact crusher is a new design that produces an excellent cubical product. This impact crusher produces a high ratio of reduction. The impact crusher is built for durability and simplicity of operation. Adjustment is easy from the exterior of the crusher. Maintenance is simple through inspection doors, and electric power unit is standard. The impact crushers offer greater reliability, high production and are ideal for portable mounting. It features of simple structure, zero key connection and special impact liner. When crushing hard rocks, it is of efficiency and energy conservation; the products are of cubic shape; the sizes of the discharging particles are adjusted; the crushing process can be simplified; the production cost can be cut down.It features of simple structure, zero key connection and special impact liner. When crushing hard rocks, it is of efficiency and energy conservation; the products are of cubic shape; the sizes of the discharging particles are adjusted; the crushing process can be simplified; the production cost can be cut down.
Shibo jaw crushers are ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is easy. The jaw crusher has features of simplicity, easy access and low maintenance. Working principle of jaw crusher: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet. Characteristics of jaw crusher: -high ratio of crushing, -even final size, -simple structure, -reliable working condition, -easy maintenance, -low operating cost.
Imapct crushers are suitable for materials whose compressive strength is under 360Mpa, and particle size is under 500mm. This kind of machine features easy maintenance, high crushing ratio and crushing efficiency etc. With end products in cubic shape, impact crushers are the ideal crusher for aggregates processing in high-type highway building, water conservancy and power construction. Type Spec. Feeder Opening(mm) Feeding Size (mm) Crushing Capacity(t/h) Motor Power(KW) Weight(t) PF-1010 ª¦1000í-1050 400í-1080 350 50-80 55-75 12 PF-1210 ª¦1250í-1050 400í-1080 350 70-120 110-132 14 PF-1214 ª¦1250í-1400 400í-1430 350 130-180 132-160 18.6 PF-1315 ª¦1320í-1500 860í-1520 500 160-250 180-260 19 .
It breaks up materials through the collision of the fast-rotating ram and materials. It's suitable for secondary and fine break for brittle and medium harness material in department like mine, cement, coal, metallury, construction, highway, burning, etc.Also, it can adjust to the cleft and the dischargeing granularity as the customers request to satisfy different needs of different customers.
Impact Crusher is also known as impact sand maker. It is widely used for breaking medium or fine degree of hard and brittle materials, such as rock, abrasive, refractory material, cement clinker, quartz, iron ore, concrete aggregate, etc. It is especially suitable for crushing construction sand and road sand. HX-type vertical impact crusher is composed of feeder, distributor, eddy crushing chamber, impeller experience, spindle assembly, electrical transmission base and eletric motor.
Jaw crusher of our our company has the features of large crushing ratio, uniform product granularity, simple construction, reliable operation, easy maintenance, low operating cost. Jaw crusher is widely used in mining, smelting, building materials, roads, railways, water conservancy, chemical industry and many other departments, and the largest compression resistance of the material is 320MPa .
This series impact crusher of shanghai shibang dealing with the material with the side length 500mm, not mor tha 350mp anti-pressure strength, impact crusher can be widely used in the first and secondary crushing. During the process of operating, the impact crushers rotor in high speed will bi brought along by the electric mote. The material will be stricken by the impact device to be crushed, and then be countered to the liner for the second crushing , then be discharged through the discharge opening . Impact crusher features many advantages: simple structure, nonkey connection. High chromium flat hammer, special impact plate, simplified crushing process, and high-efficiency and energy conservation, cubic shape for the final products. Impact crusher discharge opening can be adjusted. It is widely used in water and electricity, expressway , sand and stone , crushing field. It is proved that impact crusher is better than cone crusher and hammer crusher. Standard
Model Max. feeding granularity(mm) Adjusting range of discharge opening(mm) Capacity (m3/h) Power of motor(kW) Weight (excluding electric motor) (t) PE1600x2100 1250 175-300 870-1500 355 169 PE-1500x1800 1200 220-350 281-625 280 122 PE-1200x1500 1000 150-300 250-500 220 82.3 PE-1100x800 650 50-125 38-156 132 19.86 PE-1000x1200 850 195-265 197-214 110 50.6 PE-900x1200 750 95-165 87-164 110 50 PE-900x1060 685 230-290 100-250 110 31 PE-870x1060 660 200-260 181-210 110 30.5 PE-800x1060 640 100-200 85-143 110 30 PE-750x1060 630 80-140 72-130 110 29.3 PE-720x900 520 195-245 66-83 55-75 14.8 PE-670x900 520 195-245 66-83 55-75 14.8 PE-620x900 500 95-145 31-70 55 14.3 PE-600x900 500 65-160 30-75 55 15.5 PE-600x750 500 150-200 50-100 55 12 PE-550x900 450 50-120 47-75 55 7.8 PE-500x750 425 50-100 28.5-62.5 55 10.3 PE-475x1050 400 90-140 37.5-81 55 11.7 PE-430x600 400 90-140 35-60 37 6.5 PE-400x600 340 40-100 10-40 30 6.5 PE-250x500 210 20-80 5.7-31 18.5 3.37 PE-250x400 210 20-80 3-13.1 15 2.8 PE-150x250 125 10-40 0.6-3 5.5 0.81 PE-60x100 45 3-10 0.2-0.6 1.1 0.116 íí PJ-900x1200 750 100-180 94-170 110 55.4 PEV-750x1060 630 80-140 72-140 110 24.2 PEV-600x900 500 70-130 53-106 75 13 PEV-500x900 425 50-100 31.25-68.75 55 10 PEV-430x650 360 40-100 25-75 37 5.1 íí PEX-300x1300 250 20-90 10-65 75 11.6 PEX-250x1200 210 25-60 13-38 37 7.7 PEX-250x1000 210 25-60 10-32 30 6.5 PEX-250x750 210 25-60 8-22 22 5.1 PEX-200x1000 160 20-55 6.9-23.8 22 6.5 PEX-150x750 120 18-48 5-16 15 3.5 PEX-100x600 80 7-21 2-8 7.5 0.9
Jaw crusher Nude package