Steel Core Thin Material Slitting Line Suppliers and Manufacturers

Hoi An Lantern was made from 100% silk fabric stretched over a bamboo frame with a tassel below. These lanterns are inspired by Vietnamese artisans and is meant to bring good fortune. These Vietnamese silk lanterns are handmade using silk and brocaded fabric. When send, they will be folded as a narrow tube, then expands like an umbrella in less than a minute .

Origin: Vietnam Color: White Type: Dried Size: 3-3.5 cm Packing: 20kg/pp MOQ: 20 kgs 2 tons in 20ft

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects

MATERIAL : PP Regrind Milky White CATEGORY :PP TYPE : Regrind GRADE :Miilky White SPECIFICATION :"This is PP, from palletï¼?The factory ground size is about 40 It has no Caco3 They can regrind with size below 20mm PP is very lightï¼?one container will be load abt 20t one container maybe have abt 2t to 3t dirty PP" ORIGIN : Japan LOADING WEIGHT : 20 Tons FOB (USD/Ton) : $710-910 CNF (USD/Ton): $710 -910 HPH $740-940 Nhava Sheva $740-940 Busan (KMTC Line) $715-915 Busan (Interasia Line)

POM Regrind from zipper Teeth, industry lump, industry runner Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts. One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc. MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner CATEGORY: POM TYPE: Regrind SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt Origin: Bangladesh LOADING WEIGHT: 24 Ton FOB (USD/Ton): 650$ - 850$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

RATTAN CANE WEBBING VIETNAM - WIDTH: 45/60/70/90CM - LENGTH: 15M

Rattan Core Size 2/4 - 5/6- 7/8mm Color: natural white/natural yellow-red color or bleached white color

PRODUCT HIGHTLIGHTS Rattan Plished Round Core: We are the rattan core / rattan flat core/ rattan flat-flat manufacturer in Vietnam All of our material is from Vietnam Diameter of round core Size : 1.5 mm/2mm/4mm/6mm/8mm/10mm/12mm/14mm/16mm NW:500g/coil Packaging: Carton

Model Number: 314 321 441 430 Type: plate Application: decoration Certification: ISO Tolerance: 1% Processing Service: Bending, Welding, Decoiling, Punching, Cutting Product name: aisi 314 321 441 430 stainless steel sheet Surface: 2B, NO.4 HL available Technique: Cold Rolled Finish Material: Stainless Steel Color: Natural Color Edge: mill Edge/ slit edge Item:ISO9001 Standard Packing: Standard Export Packing Ni:min1%

Material : Stainless Steel 304 Type : Welded, Decorative Surface Treatment : Mirror:600G/800G Satin:180# 240#/ 320# /400# Thickness :0.3~2.0mm Length : 5.8meter/ 6.0meter/ 6.1meter or customized Regular Shape :Round/ Square/ Rectangle/ Oval -Click here to see all sizes Slotted Pipe : Double slotted/ Single slotted Tolerance : Out diameter: 0.2mm/ Thickness: 0.03mm ; Length: 10mm/ Weight OR Qty:15%

Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.