Ss 40 Gr Blue Gown Suppliers and Manufacturers

V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5

Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5

We do make supply worldwide to all our clients without any problem Malting Barley Class A Moisture: 13% Max Protein: 10% Min 11.5% Max Germination Energy: 95% after 5 days Full Barley: 90% Below: 2.2 mm Max 3% Purity of Variety: 95% Min Foreign Variety: 1% Max 1000 Kernel Weight: 40 gr HI Weight: Min 67 kg/h Feed Barley Grade 2 Moisture: 13% Max Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 1% Max Feed Barley Grade 3 Moisture: 13% Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 3% Max

Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium

Top quality Barley grain for food industry and animal feeding wholesale from manufacturer beans grains seeds for sale Barley is commonly used in breads, soups, stews, and health products, though it is primarily grown as animal fodder and as a source of malt for alcoholic beverages, especially beer. We are suppliers of BEST QUALITY BRAZIL BARLEY GRAINS and looking for serious buyers in need of our products, contact with us for more details. Malting Barley Class A Moisture: 13% Max Protein: 10% Min 11.5% Max Germination Energy: 95% after 5 days Full Barley: 90% Below: 2.2 mm Max 3% Purity of Variety: 95% Min Foreign Variety: 1% Max 1000 Kernel Weight: 40 gr HI Weight: Min 67 kg/h Feed Barley Grade 2 Moisture: 13% Max Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 1% Max Feed Barley Grade 3 Moisture: 13% Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 3% Max.

Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic

Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum

Eltee DMCC is the Top Leading Exporters and International Suppliers of High Quality Soda Ash Dense in world. We supply Soda Ash Dense of high quality to more than 40 countries of world such as India, Japan, South Korea, Vietnam, Kenya, Australia, Egypt, Ghana , Uganda, Tanzania, Belgium, Botswana, Chile, Czech Republic, Ecuador, Guyana, Indonesia, Kuwait, Saudi Arabia, Oman, Morocco, Norway, Philippines, Rwanda, Senegal, South Africa, Tunisia, Zambia, Poland, Mexico etc. Soda ash dense or Sodium Carbonate ( CAS name : disodium carbonate ), is a white, granular , alkaline material. Properties of Soda Ash Dense : * Chemical Formula: Na2CO3 * Molecular Weight : 105.99 * Absolute Density, g/cm3@25 degree C : 2.533 * Melting Point , degree centigrade: 851 * Solubility, max % @35.4 degree centigrade: 33.2 * pH of 1% solution @25 degree centigrade: 11.34 Chemical Specifications : * Alkalinity (as Na2Co3)% : 99.2% Min * Chloride in terms of NaCL : 0.4% Max * Iron Content: 0.002% Max * Insolubility in water : 0.1 % Max * Na02% (if its need): 58% Min Physical Specification: * Bulk Density (Dense), gr/cm3 : 0.85 - 1.1 Appearance : (Mesh Size) * Below 20 : 10% Max * 20~30 : 25% Max * 30~100 : 60% Min * 100~140 : 7% Max * 140 above : 3% Max Product Usage : * Soda Ash Dense is widely used Glass Industries * Soda Ash Dense is used as Chemical Intermediates * Soda Ash Dense is used for Water Treatment. * Soda Ash Dense is used for Flue Gas Desulfurization * Soda Ash Dense has wide usage in Pulp and paper industry.

Product Range Design Code ASME Section VIII, Div I, PD 5500, AD Merkblatter, PED 97/23/EC, IS 2825 or any other international standard. Capacity Upto 500 M3 ( 5,00,000 Liters water volume) Diameter Upto 6 meters Shell & Dished End Thickness Upto 100 mm or more Weight Upto 250 tons Length Upto 60 meters, with suitable field joints. Material of Construction Carbon Steel, LTCS, NACE & HIC resistant Material, Low Alloy Steel for high temperature service (SA 387 Gr 11 and Gr 22), Cladded Steel (CS with SS, Cupronickel, Aluminum Nickel Bronze, Aluminum brass, Titanium, Inconel and many more), SS (300 & 400 series), Duplex & Super Duplex stainless steel, Cupronickel, Monel , Inconel, Nickel & Nickel Alloys, Hastelloy, Titanium, Aluminum & Aluminum alloys.

Commodity: LDPE Film Blue Origin: Canada Quantity: 3-5 Loads/Weekly Weight: 18 MT per 40'HC Price: USD 250/MT CIF Port Klang or advise your destination port

For automatic wrapping purposes, source Machine Stretch Films. Thickness 15 - 65 microns Width 40 - 75 cm Length 700 - 2200 m Elongation 150 - 350 % Color Black, blue, clear, milky, other Opacity Low , moderate, high You may also source Manual Stretch Film & Pallet Covers Request quote for manual stretch film for effective pallet wrapping. Thickness 15 - 30 microns Width 40 - 50 cm Length 15 - 500 m Elongation 100 - 180% Opacity Low, moderate, high Also available in color. You may be interested in machine stretch film as well.

SPECIFICATON Density 500 gr/l Moisture: 12 - 13.5% max Foreign matter: 0.5 - 1% max Density 550 gr/ l Moisture: 12 - 13% max Foreign matter: 0.5 - 1% max Density600 gr/ l Moisture: 12 - 13% max Foreign matter: 0.2 - 0.5% max PACKING 40 â?? 50 kg/PP - PE, 13 tons/ cont 20â?? DC P or as buyer's request White Pepper White pepper has a slightly different flavour from black pepper due to the lack of certain compounds which are present in the outer fruit layer of the drupe but are not found in the seed. SPECIFICATION Density 630 gr/l Moisture: 13.5% max Foreign matter: 0.2 - 0.3% max Black berries: 3 - 5% max

Product Description - Grade cashew nut : WW 210, WW 320, WW240, LP, WS, W450, LBW, SW320, SW, WB, SS Product origin - USA Key Specifications/Special Features - "Grade W210, W240, W320, LP, SP, BB Type of cashew nuts Raw cashew, roasted and salted with silk shell/without shell, white kernel... Origin - Turkey Color - Yellow, white Moisture - 5% max Foreign matter - 1%max Broken - 5% max Insect - No Minimum Order Size and Packaging details - "Bulk Packaging: aluminium foil bag Retail Packaging: zip lock stand bag, PET jar, Film bag, Flat bag Carton Dimensions:38*28*28cm Conveyance: Qty/20'FCL: 999CTNS Qty/40'FCL: 2,030CTNS Qty/40'HQ: 2,310CTNS"

- Malted barley Grade 1 moisture: 13% max protein: 10% min 11.5% max germination energy: 95% after 5 days full barley: 90% below: 2.2 mm max 3% purity of variety: 95% min foreign variety: 1% max 1000 kernel weight: 40 gr hi weight: min 67 kg/h

Tasty: Spicy Size: 10-15 PCS/LB,16-22PCS/LB,22-28 PCS/LB,28-35PCS/LB Package: Packing:Inner: poly-tray, vacuum,4*5LB/CTN,2*5LB/CTN Quantity: 9MT per 20'FCL / 23MT per 40'FCL Product name: Live Lobsters (paralithodes camtschatica) - Size available: typically 0. 5 to - Product name:Live Lobsters (paralithodes camtschatica) - Size available: typically 0. 5 to 3. 0kg apiece - Meat fill: 80% or higher year round Sizes 800-1000 20% 1000-1500 50% 1500-2000 20% 2000 gr up 10%

Product Description - Whole frozen chicken . Frozen chicken wings . Frozen chicken legs . Frozen chicken hearts and kind cuts" Price of product ( USD price or FOB price) - USD 340 per Box Product origin - USA Key Specifications/Special Features - Washed and clean. Without yellow skin. No feathers. No bad smell. No blood. No bruises. No black pads. No traces of carved deep wounds. No ammonia burns. Broken bones : under 3%. Moisture content : less than 1%. Drainage : 0 to -5 C for 8 hours. Blasted at : -40 C. Storage at : -18 C 100% Fresh and Frozen Weight 900-1000 -1100-1200 - 1300- 1400-1500-1600 gr per piece. Shelf life 24 months Minimum Order Size and Packaging details - "2kg x 5/carton,1kg x 10/carton 15kg carton, 20kg carton"

Barley Seeds are a staple food used to make flour for leavened, flat, steamed breads, Biscuits, cookies, cakes, breakfast cereal, pasta, noodles, couscous and for fermentation to make alcoho-lic beverage. Apart from being a major component of various health foods like soups, malts and beverages, it is also a major animal fodder. Easy to digest, Barley is healthy to eat and has rich nutritional content. We are viewed as one of the Barley Exporters. Malting Barley Class A Moisture: 13% Max Protein: 10% Min 11.5% Max Germination Energy: 95% After 5 Days Full Barley: 90% Below: 2.2 Mm Max 3% Purity Of Variety: 95% Min Foreign Variety: 1% Max 1000 Kernel Weight: 40 Gr Hi Weight: Min 67 Kg/H Feed Barley Grade 2 Moisture: 13% Max Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 1% Max Feed Barley Grade 3 Moisture: 13% Crude Protein: 10% Min Crude Fiber: 8% Max Damaged Grains: 2% Max Grain Impurities: 3% Including Damaged Grains Foreign Material: 3% Max

Disposable Laparoscopic Drape Kit Having Laparoscopic Reinforced Non Woven Drape, Surgeon Gown, Surgeon Cap, Shoe Cover Pair, Camera Cover, Blue, Eo Sterilized, Individually Packed