OEM XSI 141094N cross roller bearing size 1164*984*56mm Material:42CrMo/50Mn/42CrMo4 Structure:cross roller bearing Ball material:Gcr15 Inner diameter:984mm Outer diameter:1164mm Height:56mm Di:1095mm da:1091mm La:1140mm Li:1055mm Weight:91kgs Mounting hole:48-14 Mounting hole:48-M12 Gear teeth: d0:1000mm m:8 z:125 Tooth force: Fz norm:31.4kN Fz max:46.7kN Basic load ratings Axial dyn Ca:390kN Axial stat C0a:1360kN Radial dyn Cr:246kN Radial stat C0r:670kN If you are interested in OEM XSI 141094N cross roller bearing size 1164*984*56mm, please contact us freely.
Turntable INA XSU 14 0944 cross roller bearing ring replacement without gear Material:42CrMo/50Mn/42CrMo4 Structure:cross roller bearing Ball material:Gcr15 Inner diameter:874mm Outer diameter:1014mm Height:56mm Di:945mm da:943mm La:990mm Li:898mm Weight:67kgs Mounting hole:44-14 Mounting hole:44-14 Basic load ratings Axial dyn Ca:360kN Axial stat C0a:1170kN Radial dyn Cr:227kN Radial stat C0r:580kN If you are interested in Turntable INA XSU 14 0944 cross roller bearing ring replacement without gear, please contact us freely.
The axial angular contact ball bearings, for screw mounting the complete units are consisted of a single-piece outer ring, a two-piece inner ring, balls, cage assemblies and seals. Bearings are double direction angular contact ball bearings with a 60 contact angle in an O arrangement. Features: - can support axial loads from both directions as well as radial loads. - are preloaded after assembly by a precision locknut. - are protected from contamination by lip seals or gap seals. - are greased with a lithium complex soap base grease to SHELL Alvania RL3. - can be relubricated. - are suitable for operating temperatures from -30C to +120C (limited by the grease, - sealing ring material and the plastic ball cages). - are precision bearings e.g. for use with screw drives. - outer ring is suitable for flange mounting. - lip seals or gap seals on both sides. ZKLF1255-2Z ZKLF1560-2Z ZKLF1762-2RS ZKLF2068-2RS ZKLF2575-2RS ZKLF3080-2RS ZKLF30100-2RS ZKLF3590-2RS ZKLF40100-2RS ZKLF40115-2RS ZKLF50115-2RS ZKLF50140-2RS ZKLF60145-2Z ZKLF70155-2Z ZKLF80165-2Z ZKLF90190-2Z ZKLF100200-2Z Industrial package.
Gear ratio:61:1 Output torque:6.5nm Tilting moment torque:33.9nm Holding torque:38.7nm Static axial rating:338kn Static radial rating:135kn Dynamic axial rating :81kn Dynamic radial rating:71kn Weight:49kgs 1.Huafang slewing drive are widely used in the solar tracking systems, special construction vehicles, port machinery and small wind turbines Wooden packege for international trade
Four-point contact ball slewing bearings can withstand torque loads, both the single row angular contact ball bearings and double row angular contact ball bearings features. Only four-point contact ball bearings in contact to ensure the formation of two normal work. It is generally applied to those of pure axial load or axial load large synthetic loads where contact was two, four point contact ball bearings high speed limit, but also for those high-speed operation of the occasion. Slewing Bearing / Slewing Ring Bearing Slewing bearing is a kind of special structure of large bearings which can withstand large axial load, radial load and overturning moment, integrating supporting, rotation, transmission, fixed and other functions. Under normal circumstances, slewing bearings have their own mounting holes, lubricants and seals, which can meet various of host need under different working conditions; On the other hand, slewing bearings themselves are compact, easy to guide the rotation,easy installation and easy maintenance, so they widely used in material handling equipments, mining machines, construction machinery, port machinery, wind power generation, medical equipments, radar and missile launchers and other large rotating devices. According to different structure, slewing bearing can be divided into the following types:1, the four-point contact ball slewing bearing2, double row different diameter ball slewing bearing3, crossed cylindrical roller slewing bearings4, three-row cylindrical roller combined slewing bearing. 011.75.4000 Dimensions:4226*3772*174 material 50Mn/42CrMo/other
Slewing ring bearings, thin section ball bearings, corssed roller bearings, slew drive, yrt rotary bearings, high precision bearings, etc.
Resin Rings Material Resin Shape Round Shape Color Transparent Packaging Type Plastic Boxes Occasion Daily Wear Feature Contemporary Fashion Design, Easy To Fit
Bearings, ball bearing, roller bearing, large diameter slewing ring bearing, thin-section cross roller bearing, wire-raceway bearing.
The Slewing Bearing that we bring you stands out of all others on counts of quality, reliability and pricing. Our Slewing Bearing quickly gained popularity along with the added range of products including mechanical parts & spares. As a leading Manufacturer and Importer of Slewing Bearings, we deliver products as per international quality standards in 570 per piece price range. To ensure utmost customer satisfaction, Wuhan Honghao Machinery offers FOB, Express Delivery freight options to deliver the order within 6-7 Business Days. Our advanced corporate venture in China, holds annual production capacity of High Volume piece. We are open for online orders that estimate around 1000 PCS piece and the order is delivered from China port. To keep the payments flexible different currencies are accepted including USD via Bank wire (T/T),Letter of Credit (L/C).
The range of our slewing bearings is the most complete of the market: internal toothed, external toothed and toothless. The maximum diameter reachable is 5 meters and the sections provided are with crossed rollers.
Single-row four points contact spherical slewing bearing
1. General: Our company manufactures various kinds of slewing bearing for different applications, such as stacker reclaimed, lade turret, offshore crane, medical equipments, engineering machinery, mineral machinery, windmill, steel mill, etc. The types we produce include: Single-row four-point contact ball slewing bearing; Double-row four-point contact ball slewing bearing; Three-row cylindrical roller slewing bearing; Crossed cylindrical roller slewing bearing; Crossed taper roller slewing bearing; Ball and cylindrical roller slewing bearing 2. Bearing materials: Inner and outer rings: GCr15(SAE52100, 100Cr6), 45# (C45), 50Mn, 42CrMo(42CrMoV); Seal: NBR, VITON; Cage: Nylon, steel, brass, AL; Grease: Ca+ base, Li+ base grease (Such as Shell, Kluber, Chevlon etc. -- We can use the grease as per customer's instructions); Packaging: Plywood case, plywood pallet, iron pallet. 3. Documentations: We record the complete documentations for tractability. Raw material certification; Forging part certification; Heat treatment certification; Hardness values report; Ultrasonic testing; Rolling part (ball/ roller) certification; Seal physical and chemical testing; Cage certification; Process flow records; Final dimensional report. Blue band and wooden cases
Slewing bearing of any sizes, types, kinds, custom made to customer requirement.
Slewing bearing can simultaneously support larger combined load including axial load, radial load and tilting moment etc. General slewing bearing all has mounting holes, oil holes and sealing apparatus, can meet categories of main machine operating under various different conditions. In addition, slewing bearing possess the characteristics of compact structure, guiding rotation convenient, easy installation and easy to maintenance, and widely applied to large size slewing equipment in the industries of engineering, mining, metallurgy, wind power generation, vessel, seaport, petroleum, chemical industry, light industry, medical appliance, foodstuff, vehicle, robot, aerospace, radar and war industry etc. According to different structural style, slewing bearing can be divided into four point contact ball slewing bearing, cross cylindrical (taper) roller slewing bearing, double row four point ball slewing bearing, double row different diameter ball slewing bearing, ball and roller combined slewing bearing and tri-row cylindrical roller combined slewing bearing etc. Above mentioned slewing bearings can also be divided into different structures of no gear type, external gear type and internal gear type as per if exist gear and gear teeth distributing position. According to different structural feature, slewing bearing can respectively meet main machine requirements under various load conditions. Among them, four point contact ball slewing bearing has higher dynamic load capacity, cross cylindrical roller slewing bearing has higher static load capacity. Tri-row cylindrical roller combined slewing bearing is a kind of high carrying capacity slewing bearing, due to leading raised carrying capacity to direction of bearing height, various loads can be respectively supported by different raceways and roller sets, so raceway diameter greatly decrease under the same stress condition, it has the character of making main machine more compact. Zsj standard packing
Slewing bearing Slewing bearing can simultaneously support larger combined load including axial load, radial load and tilting moment etc. General slewing bearing all has mounting holes, oil holes and sealing apparatus, can meet categories of main machine operating under various different conditions. In addition, slewing bearing possess the characteristics of compact structure, guiding rotation convenient, easy installation and easy to maintenance, and widely applied to large size slewing equipment in the industries of engineering, mining, metallurgy, wind power generation, vessel, seaport, petroleum, chemical industry, light industry, medical appliance, foodstuff, vehicle, robot, aerospace, radar and war industry etc. --individual wooden box packing --unique pe material inside box protection --epal standard pallet --vacuumize plastic bag packing if customer requires
The slewing bearings, ranging from 01 series to QU QW QN series.They can be widely used in the large-scale rotating devices of the hoisting machinery, excavate machinery and so on. Export standard
Single-row four-point contact ball slewing bearing; Double-row four-point contact ball slewing bearing; Crossed cylindrical roller slewing bearing; Crossed taper roller slewing bearing; Ball and cylindrical roller combination slewing bearing
Our products are widely used in solar energy, cranes, wind power, loading and unloading machines, excavators , pile drivers and other machines. Any needs,please feel free to contact us.
Can accommodate axial, radial and moment loads acting either singly or in combination and in any direction. They are not mounted on a shaft or in a housing; the rings, which are simply bolted on the seating surface are available in one of three executions: Without gears With an internal gear With an external gear Plywood case
Slewing bearings GWG products range: 1. Four Point Contact Ball Slewing Bearings (HS Series - Toothless / Ext Toothing / Int Toothing) 2. Cross Roller Slewing Bearings (HJ Series - Toothless / Ext Toothing / Int Toothing)
