Low temperature polymer battery 703040 3.7V 850mAh Low temperature polymer battery 503759 3.7V 1150mAh Low-temperature Li-polymer batteries extend the low temperature discharge to -35°C and showing the excellent performance at -35°C. Good stability and low self-discharge rate, good consistency.Comparing with normal Li-Polymer batteries, low-temperature Li-polymer batteries break through the discharge temperature limits of -20°C to 60°C, and it can generate high current and high capacity at -35°C. Application: GPS,Car tracker,Military radio,Line broken indicator, etc. Low-temperature Li-polymer battery will be widely used in cold climates and military products.
PDLC(Polymer Dispersed Liquid Crystal) film is a part of electronics that can actively adjust the penetration ratio of solar light. This is a new material that adjusts the penetration of visible rays according to the presence or absence of electricity. It is laminated with PDLC film from two transparent conductive coated PET. PDLC film consist of droplets of liquid crystal dispersed in a matrix prepolymer binder. The PDLC film has liquid crystal droplets with a bipolar alignment. In the absence of an electronic field the droplet director are randomly aligned and in general the refractive index of the droplet is mismatched with that of the prepolymer and the materials scatter light. In on state, the film of the PDLC can be switched to an index matched and transparent state by application of an electric field aligning the drioplet director parallel to the applied field.
Voltage class kv: 15, 25 & 35 - easier construction thanks to the light weight - excellent impact resistance - excellent mechanical properties - the characteristics to repel water of polymer material
Use in baby diaper, napkin, ice bag , etc Use in baby diaper, napkin, ice bag , etc
Use in fresh pad, absorbent pad Use in fresh pad, absorbent pad
1. Product details Ded to apply to tile adhesive, skim coat indoor or outdoor, troweling compounds, gypsum based mortars, it can be also und bags with pe liner. 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage: 3s-6001yh must be stored in a cool and dry place. To prevent moisture penetration, the storage temperature is not over 30 degree. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Packaging which has been opened should be sealed again as soon as possible. Not exposure to water, sunlight, especially during transportation. 3s-6001yh storage time should not exceed 6 months from the date of delivery. Packing: 20/25kgs /bag. Paper compound bags with pe liner.
Setaky-501r3 is a kind of water-redispersible copolymer powder copolymerized with modified vac/e. Appearance : white powder, freely flow stabilizing system: polyvinyl alcohol additive agent : mineral anti-block agent General application Tile adhesive mortar self-levelling mortar interior wall putty powder A. Standard packing:in 25kg paper bags inner with pe bags B. Big bags or other special packages as per clients¡¡¥ request.
*this article is used in cable industry *with higher swelling speed and higher swelling height. *swelling speed>10/min;swelling height>15/min; *fast absorption 800kg/bag/pallet; 25kg/bag.
* sap used for pet pad, * sap used for baby diaper ended; * sap used for wipes; * sap used for bathroom tissue; * sap used for sanitary napkins. Based on customer requirement
1. Product details Name: redispersible polymer powder (rdp) Brand name: 3s (degree):0~5.0 3. Product description 3s-6001yh is a copolymer powder of vinyl acetate and ethylene which is easy dispersible in water and used polyvinyl alcohol as protective colloid. 4. Product features 3s-6001yh can improve dry-mixed mortars performances: Adhesion strength Anti-sponification Abrasion resistance Water retention Sag resistances in tile adhesive Non-slump in skim coat 5. Product application 3s-6001yh is highly recommended to apply to tile adhesive, skim coat indoor or outdoor, troweling compounds, gypsum based mortars, it can be also used for tile grouts, thin-bed mortars and self-leveling compounds, etc. 6. Dosage 3s-6001yh may be suggested to add 1~3% into dry mixed materials depending on actual application, desired performances and user's professional experimental experiences. The exact dosage must be evaluated through mature experiments before using actual application in bulk. 7. Packing Packing: 20/25kgs /bag. Paper compound bags with pe liner. 8. Delivery Delivery time: within 15~20days after payment confirmed. 9. Storage: 3s-6001yh must be stored in a cool and dry place. To prevent moisture penetration, the storage temperature is not over 30 degree. It should not be subjected to pressure of high temperatures during storage because of the risk of caking. Packaging which has been opened should be sealed again as soon as possible. Not exposure to water, sunlight, especially during transportation. 3s-6001yh storage time should not exceed 6 months from the date of delivery. 20/25kgs /bag. Paper compound bags with pe liner.
Special features Polyvae174;yt-8012 has no effect on rheological preperties and is a low-emissions, general-purpose powder in the medium tg range. It is eminently suitable for formulating compounds of high ultimate strength. In 25kg paper compound plastic bags. In 500kg jumbo bags on pallet Packing on request
Co polymer eva gloves Ethylene vinyl acetate eva disposable gloves. 1 box=100 pcs 1 carton = 3000 pcs
Ecosafe-sap is super absorbent bio polymers are primarily used as absorbent for biological fluids, water and aqueous solutions. Ecosafe-sap super absorbent polymer can be employed in various applications. Such as in disposable sanitary products (i.E, diapers, incontinence articles, female hygiene products and absorbent dressings.) household articles, sealing materials (agriculture/horticulture), absorbent paper products, wound dressings and as chemical absorbents. Furthermore ecosafe-sap also employed in applications related to the transportation of fresh food or sea food as well as in food packaging applications. Polyacrylates obtain from the polymerization of monomers such acrylic acid and acrylamide. However their biodegradability is questionable, especially for higer molecular weight polymers, polyacrylates generally contain small amounts of residual monomeric starting materials i.E, acrylic acid and acrylamides possessing both toxic and allergenic potential. While ecosafe-sap is biodegradable and hypoallergenic. Non toxic and harmless to human body and safe for environment. 25 kg
Appearance:White Particle sizes:Fine, powder Odor:Imperceptible Moisture:5% Max. PH:6.0-7.0 Melting point/Range:>400 0 F Bulk density:0.60-0.70 Water solubility:Insoluble Toxicity None Shelf life2year Package 20Kg bag, 750Kg sack. 25kg/bag.
Composite- GRP- Polymer manhole covers according to EN124.
Product formulated based in oxidized asphalt and polymer, specially designed to act as an anti-corrosive agent against acid fumes. It protects sheet metal furnaces, chimneys, etc. Shows excellent resistance to thermal shock and can work continuously in the range of -40 ° C to 120 ° C with maximum temperature of 160 ° C. Does not present significant contraction after application for your weight loss maximum at 25 ° C is 5.0%. Tambor 200 liters.
Application: The typical application field of tiones tm 6012e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows Plaster mortar Skim coat Grout mortars Gypsum plaster. 1.Product description Tiones tm 6012e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2.Specifications Appearance: white free-flowing powder Protective colloid: polyvinyl alcohol Bulk density: 500 ± 100 g/l Particle size: max. 10% over 150 Residue moisture: ≤ 2% Ph value: 7.0 ± 1.0 (50% dispersion in water) Film properties: opaque, flexible Mfft: approx. 0°c Tg : (+6°c) 3.Properties Tiones tm 6012e increases cohesion of binding material and improves performances of Cement based products. It provides pre-mixed mortars with following advantages: Improves workability Improves adhesion strength Improves flexural strength 4. Dosage and handling Tiones tm 6012e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 5.Storage Tiones tm 6012e should be stored in a cool, dry place. To prevent moisture penetration, the opened bags should be sealed again as soon as possible. On account of thermoplasticity of the redispersible polymer powder, bags must not be stacked higher than one pallet. Tiones tm 6012e storage time should not exceed 6 month. 20kg/bag.
We have fresh stock of polymer violet CTP plates in Shanghai port. 50pcs/ctn.
Application: Tiones tm 6041a can be used in a variety of applications in building industry. Its typical application field is high flexible polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are: Waterproof mortars Waterproof wall putty (skim coat) Concrete repair mortars Tile grout Non-shrinking grouting material Powder paint 1. Product description: Tiones tm 6041a is a water-soluble redispersible polymer powder based on copolymer of pure acrylate. It's free of any solvents. 2. Specification: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 5% over 150μ m Residue moisture----------------------------------≤ 2% Ph value---------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties------------------------------------opaque, high flexible Mfft------------------------------------------------approx. 0° c Tg ---------------------------------------------------(-5° c) 3. Properties: Tiones tm 6041a is high flexible with very low tg range. It provides pre-mixed mortar with the following advantages: Outstanding water resistance Improves flexibility Improves workability Excellent weatherability and durability Prominent heat resistance Reduces elastic modulus 4. Dosage and handling: Tiones tm 6041a is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of dry material depending on actual application and desired performance. Final required dosage should be evaluated by testing prior to actual application. 20 kg/bag: valved multi-layer paper bag with polyethylene interlayer.
Application The typical application field of tiones tm 6021e is polymer-modified dry mixtures based on mineral binders such as cement, lime or gypsum. The highly recommended applications are as follows: Eifs adhesive mortar, plaster mortar & anti-cracking mortar Cement-based tile adhesive Tile grouts Grout mortars Repair mortar Gypsum plaster 1. Product description: Tiones tm 6021e is a water-soluble redispersible polymer powder based on copolymer of vinyl acetate and ethylene. It's free of any solvents. 2. Specifications: Appearance---------------------------------------- white free-flowing powder Protective colloid----------------------------------polyvinyl alcohol Bulk density-----------------------------------------500 ± 100 g/l Particle size-----------------------------------------max. 10% over 150μ m Residue moisture----------------------------------≤ 2% Ph value----------------------------------------------7.0 ± 1.0 (50% dispersion in water) Film properties-------------------------------------opaque, high flexible Mfft-------------------------------------------------approx. 0° c Tg ----------------------------------------------------(+7° c) 3. Properties: Tiones tm 6021e increases cohesion of binding material and improves performances of cement based products. It provides pre-mixed mortars with following advantages: Improves adhesion strength substantially Improves workability Improves crack resistance Improves flexural strength Reduces elastic modulus 4. Dosage and handling: Tiones tm 6021e is added to other powdery components to obtain the mixed homogenous formulation. The dosage should be more than 1.5% of the total dry mixture by weight. The final required dosage should be evaluated in suitable tests prior to the actual application. 20kg/bag: valved multi-layer paper bag with polyethylene interlayer.
