Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 120 is a formulated VG120 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 120 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 120, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 120 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Maltodextrin is safe for people who avoid gluten, even when itâ??s made from wheat. Maltodextrin is a white, starchy powder that manufacturers add into many foods to improve their flavor, thickness, or shelf life. Maltodextrin is a common ingredient in packaged foods, such as pastries, candies, and soft drinks. When it is present, it will usually feature on the food label. Easily absorbed by the human body, it is especially suitable as a basic raw material for patients, infants and children's food. It has a good stabilizing effect on food and beverage foam. It has the characteristics of low sweetness, no peculiar smell, easy digestion, low heat, good solubility, low fermentation, good filling effect, not easy to absorb moisture, strong thickening, good carrier, good stability, and hard to deteriorate. Maltodextrin contains a lot of polysaccharides, and also contains calcium, iron and other trace elements and minerals that are beneficial to the human body, and can promote the body's normal material metabolism.
Cassava is the third largest source of food carbohydrates in the tropics, after rice and maize.Cassava is a major staple food in the developing world, providing a basic diet for over half a billion people.It is one of the most drought-tolerant crops, capable of growing on marginal soils. Nigeria is the world's largest producer of cassava, while Thailand is the largest exporter of dried cassava. Cassava Starch contains typical large oval spherical granules; their size ranges between 5 and 100 �¼m. Potato starch is a very refined starch, containing minimal protein or fat. This gives the powder a clear white colour, and the cooked starch typical characteristics of neutral taste, good clarity, high binding strength, long texture and a minimal tendency to foaming or yellowing of the solution
SWEET POTATO STARCH ------------------------------------- Potato starch is starch extracted from potatoes, contains typical large oval spherical granules ranging in size from 5 to 100 �¼m. Potato starch is a refined starch, containing minimal protein or fat. This gives the powder a clear white colour, and the cooked starch typical characteristics of neutral taste, good clarity, high binding strength, long texture, and minimal tendency to foaming or yellowing of the solution. Starch derivatives are used in many cooking recipes, for example in noodles, wine gums, cocktail nuts, which is used to keep the cake moist and give a soft texture. It is also occasionally used in the preparation of pre-packed grated cheese, to reduce sweating and binding.
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
Product Name: Stearic acid price/price of stearic acid Active ingredients: Stearic acid Specification: 98% Testing Method: HPLC Appearance: White soft small pieces English name: Stearic Acid Stearic Acid oil plant and animal products - 829 this product in solid fatty acids, main ingredients for Stearic Acid (C18H36O2) and palmitic Acid (C16H32O2). Other name: Octadecanoic Acid, N-Octadecan Acid , Octadecan ACID , Cetylacetic Acid ,FEMA 3035, Carboxylic Acid C18 , C18 ,C18:0 , Fatty Acid , Acidum Stearicum 50 ,N-Octadecylic Acid , N-Octadecanoic Acid Application: 1. Metallic salts, lubricant and plasticizer in plastic industry 2. the curing active ingredient, the softener, the dispersing agent in the rubber industry 3. raw materials for different wax, like candle wax, tea wax etc. 4. the softening cream, cold cream in the cosmetics greasy raw materials 5. the softening agent in the paper industry 6. the emulsifier, the dispersing agent, the quality modifier in food industry Packing: 20kg/ bag, 17MT/20FCL, no pallets;12MT/20FCL with pallet;24MT/40FCL
We offer you a wide range of carrier oils, each with its unique texture, aroma, and wellness benefits. Carrier oils are thick in consistency that is used as a medium to transfer myriad essential oils, body butters, or any other substance to the body cells. Their texture allows them to be absorbed well by outer layer of body and reaches all the wellness benefits. We carry out intensive R&D to bring forth an extensive range of carrier Oil. Carrier oils are often vegetable oils made from a plant's seeds, kernels, or nuts, such as coconut oil or avocado oil. Essential oils are "carried" to your body via carrier oils after being diluted. Since essential oils are far too strong to apply topically, base oils are used to dilute them before topical application. They also help to get desirable consistency in diverse make-up items. Carrier oils provided by carrier oil suppliers are an integral part of many daily used end products. Besides, these oils are extensively used for direct apply on out layer of body for miniaturization and more benefits. The restorative effects of essential oil are not affected by most carrier oils, which are often odorless or only mildly perfumed. Now it does not mean that career oils do not have any individual characteristics. They are loaded with amazing properties for body and can be used on their own and in combination with other oils to hydrate outer layer of the body. Due to their ability to stick to the body, carrier oils are also known as "fixed oils." This makes them perfect for controlling essential oil concentration and make less the strength of an essential oil's aroma without affecting its properties. To maximize the effects and utility of the essential oils as well as control the finished product's color, scent, aromatic characteristics, and shelf life, etc carrier oil is an essential component for the makeup and aromatic industries. Used and Benefits:- * Carrier oils are best to use as an excellent lubricant. * Most of the carrier oils promote a glowing complexion. * Carrier oils considered very safe with uses in facial, make-up products. * Carrier Oil can be added in any personal care product to extend product's lives. * These oils are widely demanded for its qualities like light, sweet and nutty aroma.
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI-1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI-1507-32 Viscosity @ 40C, cSt, ASTM D445 31.72 Viscosity @ 100C, cSt 5.28 Viscosity @ 100F, SUS 165.0 Viscosity @ 210F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60F, ASTM D4052 9.43 Pour Point F (C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F (C), ASTM D92 350 (177) Fire Point, C.O.C.,F (C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications
CPI-1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
CPI -1507 series products are polyalkylene glycol lubricants, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of these lubricants to withstand dilution by hydrocarbon gases is particularly advantageous in compressors handling high concentrations of hydrocarbon and gasoline vapors. Applications include lubricating mechanical seals, centrifugal compressors, and scroll compressors. CPI -1507 series products are heat stable polymers in the absence of oxygen. They are soluble in water. Test Procedure CPI -1507-32 Viscosity @ 40 C, cSt, ASTM D445 31.72 Viscosity @ 100 C, cSt 5.28 Viscosity @ 100 F, SUS 165.0 Viscosity @ 210 F, SUS 44.0 Viscosity Index, ASTM D2270 96 Density, lb/gal, 60 F, ASTM D4052 9.43 Pour Point F ( C), ASTM D97 -49 (-56.2) Flash Point, C.O.C., F ( C), ASTM D92 350 (177) Fire Point, C.O.C., F ( C), ASTM D92 355 (179) Specific Gravity, ASTM D4052 1.130 These are typical values and are not intended for use in preparing specifications.
-Egg White Powder -Whole Egg Powder -Egg Yolk Powder About Egg white powder Egg white powder is made of pure egg white. It has the characteristics of desugarization, deodorization and quick dissolution. At the same time, it has good features, such as gel , foam ability, water retention. Thus it is widely used in many industries such as meat, surimi product products, bakery products, flour products and candy products etc. In addition, it is also widely used in textile, industries etc. The Function of Egg White Powder Egg White Powder is the high-quality food with balanced nutrition and the good food additive. It has the properties of emulsification, gelatination, foamability and water retention etc. It is applicable to all food products involved eggs as raw material, such as the pastry, biscuit, chicken essence, instant noodle, ice cream, salad sauce, noodle, drinks and pet food etc. Applications Of Egg White Powder 1. Egg White Powder can add into cakes, biscuits, and bread then improve nutritional value of the products, and increase the volume and softness, improve food flavor. 2. Egg White Powder after mixing with the dough, it can make the dough has higher ability of gas containing. 3. Egg White Powder add into the baked goods, and make the food surface colorful and beautiful. 4. Egg White Powder as a kind of natural emulsifier for the cold food, it can increase the cohesiveness of fat, and improve the conformity of the cold food. 5. Egg White Powder can as the ingredients of flavoring. Egg White Powder Egg powder is made by selecting, washing, disinfecting, spraying, drying, beating, separating, filtering, homogenizing, pasteurizing, spray drying, and sieving fresh eggs from the company's dedicated green chicken farm.
CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%
CPI -1507-150 is a polyalkylene glycol lubricant, formulated to give negligible solubility or dilution in contact with hydrocarbon liquids or vapors. The ability of this lubricant is to withstand dilution by hydrocarbon gases is particularly advantageous in liquid ring vacuum pump and centrifugal compressors handling high concentrations of hydrocarbon and gasoline vapors. CPI-1507-150 is a heat-stable polymer in the absence of oxygen. It is soluble in water. Test Procedure CPI-1507-150 Viscosity @ 40C, cSt, ASTM D445 115.1 Viscosity @ 100C, cSt 17.61 Viscosity @ 100F, SUS 587 Viscosity @ 210F, SUS 90.5 Viscosity Index, ASTM D2270 159 Density, lb/gal, 60F, ASTM D4052 9.27 Pour Point F (C), ASTM D97 22 (-5.6) Flash Point, C.O.C., F (C), ASTM D92 495 (257) Fire Point, C.O.C., F (C), ASTM D92 540 (282) Specific Gravity, ASTM D4052 1.11 These are typical values and are not intended for use in preparing specifications.
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
CPI-4628-68 is formulated with high quality synthetic polyalphaolefi n (PAO) basestock, combined with our patented seal swell technology. This lubricant features enhanced oxidation stability and a low pour point, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. Our patented seal swell technology minimized ammonia leaks due to poor elastomer performance. CPI-4628-68 is particularly suited for use in ammonia compressors with evaporator temps below -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia leaks Mineral oil compatible Easier change-over Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Very low pour point Reduced efficiency loss and easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 59.1 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 131 Density, g/mL, 20 C ASTM D4052 0.84 Pour Point ( C) ASTM D97 -54 Flash Point, C.O.C., ( C) ASTM D92 266 Fire Point, C.O.C., ( C) ASTM D92 282
CPI-1008-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package that includes patented seal swell technology. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and signifi cantly reduced lubricant consumption. Our patented seal swell technology minimizes leaks due to poor elastomer performance. CPI-1008-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Patented seal swell technology Minimize ammonia system leaks Oxidatively stable Longer system life Low carry-over Improves evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 68 Viscosity @ 100C, cSt ASTM D445 8.9 Viscosity Index ASTM D2270 111 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 240 Fire Point, C.O.C., (C) ASTM D92 268
Product Code : 1TCD00NS Product Name : Turmeric Sliced Dried Non Steam Sterilized Description : Dried Sliced of selected washed fresh rhizomes of Curcuma longa a herbaceous tropical and subtropical perennial herb. Country of Origin : Indonesia Common Name : Kunyit (Indonesia), Turmeric (English) Botanical Name : Curcuma longa Plant Part : Used Root ANALYTICAL/PHYSICAL Odor Slightly peppery, bitter fresh and aromatic characteristic of turmeric Color/Appearance : Orange to medium yellow Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max.12.0 Volatile Oil (%) : Min. 3.5 Foreign Matter : Max. 0.5 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Not Available Yeast and Mold (cfu/g) : Not Available E. coli (cfu/g) : Not Available Coliform (cfu/g) : Not Available Salmonella (cfu/25g) : Not Available METHODS Testing methods : ASTA METHOD PACKAGING : Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE : 12 Months when stored properly on the following conditions : Recommended storage temperature: 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure Use all after opening the packaging
Product Code : 1KLG20ST Product Name : Kaffir Lime Leaf Ground US #20 Steam Sterilized Description Pure Kaffirlime Leaves processed from the selected clean and oven dried leaves of Citrus hystrix. Country of Origin : Indonesia Common Name : Daun Jeruk (Indonesia), Kaffir Lime Leaf (English) Botanical Name : Citrus hystrix. Plant Part : Used Leaf ANALYTICAL/PHYSICAL Odor Characteristic to Kaffirlime Leaves odor, fresh lime-like aroma with a characteristic pleasant taste. Color/Appearance : Yellowish green to pale green dried leaves powder. Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max. 12.0 Volatile Oil (%) : Min. 0.3 Ash on Dry Basis (%) : Max. 10.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Particle Size (%) : Min. 95.0 Through US #20 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 10.000 Yeast and Mold (cfu/g) : Max. 100 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/50g) : Negative METHODS : Testing methods : ASTA METHOD PACKAGING : Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE : 12 Months when stored properly on the following conditions: Recommended storage temperature: 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure
