We Are Now Able To Sell Soybeans From Brazil If You Can Live With Our Payment Terms. We Have The Soybeans If You Can Live With Our Terms Below. We Have Made And Are Currently Making Deliveries Under These Terms. Supplier requires an DLC which is 100% irrevocable & payable at sight ie. submission of original B/L through email & all other relevant documentation, with transferable, partial shipment allowed & divisible. Hence documents provided govern the payment terms. Only once seller has provided documents to buyer, payment is made. This is all conducted bank to bank. Always best to have a draft LC first to make sure all is correct & in order prior to progressing. I would suggest Letter of Intent to get started from group issuing LC. Minimum Spot Order Is 12,500 Mt, No Exceptions We Do Offer Container Loads And Spot Orders Of A Minimum Of 12,500 Ton. We Need To Know Your Target Price And Delivery Location In Order To Quote. The Sellers Bank Shalls End To The Buyers Bank A Complete Set Of Shipping Documents For Confirmation And Verification. After Receipt Of The Original �???shipping Documents�¢?? Within (Five) 5 Banking Days, Payment At Sight (100% Mt-103) Is Released. We Do Not Accept Any China Or Asia Payment Terms. You Want To Buy Our Product It Is Our Terms. Thank You. Please Send Us Your Target Price If You Are Serious.
We Are Now Able To Deliver All Types Of Rice. The Payment Terms Are As Follows: We Have The Rice If You Can Live With Our Terms Below. We Have Made And Are Currently Making Deliveries Under These Terms. Supplier requires an DLC which is 100% irrevocable & payable at sight ie. submission of original B/L through email & all other relevant documentation, with transferable, partial shipment allowed & divisible. Hence documents provided govern the payment terms. Only once seller has provided documents to buyer, payment is made. This is all conducted bank to bank. Always best to have a draft LC first to make sure all is correct & in order prior to progressing. I would suggest Letter of Intent to get started from group issuing LC. The Minimum Spot Order Is 12,500 Mt, No Exceptions We Do Offer Container Loads And Spot Orders Of A Minimum Of 12,500 Ton. We Need To Know Your Target Price And Delivery Location In Order To Quote. The Sellers Bank Shalls End To The Buyers Bank A Complete Set Of Shipping Documents For Confirmation And Verification. After Receipt Of The Original Shipping Documents Within (five) 5 Banking Days, Payment At Sight (100% Mt-103) Is Released. We Do Not Accept Any China Or Asia Payment Terms. You Want To Buy Our Product It Is Our Terms. Thank You. Please Send Us Your Target Price If You Are Serious.
Lactic Acid Liquid, E270, CAS no.50-21-5, Chemical Formula C3H6O3, is a carboxylic acid manufacturing process through fermentation from corn starch. The lactic acid is a yellowish to colorless liquid, property having a mild acid odor and taste. Many bacterial species produce lactic acid, with Lactobacillus, Bifidobacterium, Streptococcus, Pediococcus and Leuconostoc. Lactic acid used as acid ingredient in sour dairy products, fermented fruits and vegetables and in sausages. As an experienced Lactic Acid Liquid manufacturer and supplier, we has been supplying and exporting Lactic Acid Liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Lactic Acid Specification Lactic acid food grade specification ITEM STANDARD APPEARANCE YELLOWISH LIQUID ASSAY 80% MIN HEAVY METALS(AS Pb) 0.001% MAX IRON 0.001% MAX ARSENIC 0.0003% MAX CHLORIDE 0.2% MAX SULPHATED ASH 0.1% MAX RESIDUE ON IGNITION 0.1% MAX SUGAR PASS TEST Lactic acid Pharma Grade specification ITEM STANDARD Content % 85-90 chloride % 0.002 sulphate % 0.01 iron % 0.001 residualon ignition 0.1 heavy metal % 0.001 arsenate % 0.0001 free carbonizing % no brown color at interface reducing sugar % no red sediment
Drying Process - Air Drying(Dehydrated) or Freeze Drying(Lyophilization) Material - Fresh Lychee Grade -A Moisture - 5% Nutrients of Lychee: Fresh whole lychee contains a total 72 mg of vitamin C per 100 grams of fruit, an amount representing 86% of the Daily Value (DV) (table, right). On average, nine peeled lychee fruits could meet an adult's daily vitamin C requirement but otherwise would supply little nutrient content. Lychees are low in saturated fat and sodium. And lychee contains oligonol, a short-chain polyphenol under preliminary evaluation for its potential biological properties.
Mannitol, E421, CAS No. 87-78-5, a sugar alcohol/polyol, the sweetness equivalent to sucrose 70%. Manufacturing process via the hydrogenation of fructose. It is an isomer of Sorbitol, widely used as sweetener in chewing gum with its pleasant taste and mouth feel. Characteristics: colorless crystalline powder, odor free and with sweet taste, easily dissolved in water. Function and uses as a sugar substitute for people with diabetes and in chewing gums. As an experienced Mannitol manufacturer and supplier, we has been supplying and exporting Mannitol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Mannitol powder food grade Specification ITEM STANDARD APPEARANCE WHITE CRYSTALLINE POWDER ASSAY 98.5-101.5% WATER INSOLUBLE FREELY SOLUBLE ACID DEGREE CONFORMS LOSS ON DRYING 0.3 % MAX RESIDUE ON IGNITION 0.1% MAX REDUCING SUGARS 0.3% MAX ARSENIC 2PPM MAX NICKEL 1PPM MAX CHLORIDE 10PPM MAX SPECIFIC ROTATION +137�°-+145�° MELTING POINT 165-168â?? AEROBIC PLATE COUNT 1000cfu/g MAX COLIFORM 10MPN/100g MAX ESCHERICHIA COL 10cfu/g MAX YEAST&MOLD 10cfu/g MAX SULFATE 50PPM MAX LEAD 1PPM MAX
Prime tallow (extra fancy) F.F.A : 2% max F.A.C : 3-5% max M.I.U : 1% max Titre : 41.5 C min Bleach : 0.5 red max Prime tallow (top white) F.F.A : 2-5% F.A.C :1-3% max M.I.U : 1% max Titre : 41.5 C min Good tallow (fancy) F.F.A : 2-5% max F.A.C : 11A/11B max M.I.U : 1% max Titre : 41.5 C min Bleach : 1.0 red max Bleachable tallow F.F.A : 4% max F.A.C : 19/21Max M.I.U : 1% max Titre : 41.5 C min Bleach : 1.5 red max Unbleachable tallow F.F.A : 10% max F.A.C : 21/23 max M.I.U : 1% max Titre : 41.5 C min Refined yellow grease F.F.A : 10% max F.A.C : 21 max M.I.U : 2% max Titre : 38.0 C min Yellow grease (crude) F.F.A:10% max F.A.C:21 max M.I.U:7% max Titre:38.0 C min Low gut tallow F.F.A : 60% max F.A.C : 45 max M.I.U : 3% max Titre : 40.0 C min
Prime tallow (extra fancy) F.F.A :2% max F.A.C : 3-5% max M.I.U : 1% max Titre : 41.5 C min Bleach : 0.5 red max Prime tallow (top white) F.F.A : 2-5% F.A.C : 1-3% max M.I.U : 1% max Titre : 41.5 C min Good tallow (fancy) F.F.A:2-5% max F.A.C:11A/11B max M.I.U:1% max Titre:41.5 C min Bleach:1.0 red max Bleachable tallow F.F.A:4% max F.A.C:19/21Max M.I.U:1% max Titre:41.5 C min Bleach:1.5 red max Unbleachable tallow F.F.A:10% max F.A.C:21/23 max M.I.U:1% max Titre:41.5 C min Refined yellow grease F.F.A:10% max F.A.C:21 max M.I.U:2% max Titre:38.0 C min Yellow grease (crude) F.F.A:10% max F.A.C:21 max M.I.U:7% max Titre:38.0 C min Low gut tallow F.F.A:60% max F.A.C:45 max M.I.U:3% max Titre:40.0 C min
Lithium hydroxide CAS No. : 1310-65-2 Other Names : lithium hydrate MF : LiOH.H2O, LiOH EINECS No. : 215-183-4 Purity : 56.5% Appearance : White Powder Application : lubricating greases, batteries etc Color : White Sample : Available Apperance : Powder Mp : 462 C Density : 1.43 Water Solubility:Water Solubility: 113 g/L (20 C) lithium hydroxide Lithium hydroxide CAS 1310-65-2 Usage 1. It is mainly used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries. 2. It is used to make lithium salt and lithium grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
IUPAC Name: (3R,4R,5R)-1,3,4,5,6-Pentahydroxyhexan-2-one Other Names: D-allulose, D-ribo-2-hexulose Appearance: White Crystal Powder CAS Number: 23140-52-5/551-66-8 Chemical Formula: C6H12O6 Molar Mass 180.16 g�·molâ??1 Melting Point 58 �°C (136 �°F; 331 K) Function of Allucose 1. Low-calorie sugar 2. No effect on blood sugar 3. Can be part of a healthy diet 4. The taste and Texture of sugar, without all the calories 5. Contributes far fewer calories (approximately 90 percent less) than sugar
evian has naturally occuring elecrolytes contributing to the taste nature intended. Mineral Composition (mg/l) Calcium Ca++80 / Magnesium Mg++26 / Sodium Na+6,5 / Potassium K+1 / Silica Si02 15 Bicarbonates HC03-360 / Sulfates S04--14 / Chlorides CI-10 / Nitrates N03-3,8 Dissolved solids at 180�°C: 345mg/l Neutrally balanced pH = 7,2 evian�® is all natural and perfectly pure. Each drop of Evian starts as rain and melting snow on the peaks of the Northern Alps. It filters through layers of glacial sand during a 15+ year journey deep in the heart of the mountains. Through this process, Evian is filtered naturally, without chemicals, giving it the purity, mineral content, and taste that nature intended. EVIAN mineral water This mineral water is with French label EVIAN - 24 x 33 cl pet bottles EVIAN - 24 x 50 cl pet bottles EVIAN - 12 x 75 cl (sport cap) pet bottles EVIAN - 12 x 100 cl pet bottles EVIAN - 12 x 150 cl pet bottles
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
- Used Rail STEEL in stock - R-50/R-65 Procedure 1. Buyer shall issue LOI(Letter of Intent) to Seller 2. Seller shall issue SCO(Soft Corporate Offer) to Buyer and Buyer shall issue ICPO(Irrevocable Corporate Purchase Order) to Seller when it is accepted. 3. Buyer shall issue MT705 or the attached BCL(Bank capability Letter) through their bank to prove the bank capability. 4. ICPO shall be written with Buyer companyâ??s letterhead, and include Buyer banking information and representativeâ??s passport copy 5. Seller shall issue to Buyer the draft of SPA(Sales and Purchase Agreement) together with IMFPA(Non-Circumvention, Non-Disclosure Agreement) & NCNDA(Irrevocable Master Fee Protection Agreement) and all of agreements are signed(Sealed,Endorsed) together when both agree. 6. Buyer shall issue the MT700, 100% Irrevocable At sight L/C (Letter of Credit) through the bank SWIFT for the full value of the commercial invoice. 7. Seller's bank shall issue PB(Performance Bond) equivalent to 2% of the value of the L/C to the buyerâ??s bank after Sellerâ??s bank approves the L/C. 8. The delivery schedule of the signed SPA (contract) shall keep on time and shipment shall arrange as soon as possible. Buyer can check and get the followings once the BCL(proof of bank capability) and MT700 are transferred and confirmed through the bank SWIFT system.. Seller's business license Manufacturer Export license Certificate of ownership Certificate of Origin Certificate of Export Permission Proof of Product Certificate of Chemical Composition SGS report for technical specification test Ownership transfer Sight Inspection for Seller's Warehouse Any of additional documents shall be exchanged only through the secured Bank channels(Bank SWIFT) such as MT700 or MT705. If you are a real buyer, feel free to contact me. The seller has 5 million tons in stock.
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Properly processed soybean meal offers the most complete nutrient profile of any common feedstock. Some of its most significant nutritious benefits include: Protein Soybean meal contains 47-49% protein and 3% crude fiber if the hulls are removed before processing. Processors often leave some hulls in tact or add separated hulls back into the material after processing to create a meal with about 43-46% protein and at least 6% crude fiber. Monogastric (single-stomached) animals, like pigs and chickens, donâ??t digest dietary fibers very well, so they prefer low-fiber, high-protein feeds. Soybean meal offers the highest protein content of any common oilseed or grain, supplying the most complete source of plant-based protein. Amino acids Soybean meal provides all the essential amino acids that monogastric animals requireâ??especially those like lysine and tryptophan that are lacking in corn and other cereal grains. Plus, the amino acids in soybeans are highly digestible. Compared to other oilseed meals, soybean offers the highest lysine digestibility and ranks high in methionine, cystine, and threonine. Energy Soybean meal offers more metabolizable energy than any other plant protein, especially when processed in a mechanical press like the Anderson Expeller. The press leaves about 5% residual oil in the meal, which boosts fat-based energy in feed. The nutrition facts for 100 grams of boiled soybeans are : Calories: 172 Water: 63% Protein: 18.2 grams Carbs: 8.4 grams Sugar: 3 grams Fiber: 6 grams Fat: 9 grams Saturated: 1.3 grams Monounsaturated: 1.98 grams Polyunsaturated: 5.06 grams Terms: MOQ: 25,000 mt * 12 months CIF USD 420 / mt ITLC / SBLC / TT from a top 50 bank Draft of the letter of credit to be approved by the Seller before issuance
Introduction: - Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for many applications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR Applications: - CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Available Mesh Size: - 100 - 500 MESH Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index ompound Unit Result 1. Silica - (SiO2) % 66 - 68 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.03 - 0.06 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 - 3 8. Potash - (K2O) % 10 - 12 9. Loss on Ignition - (LOI) % 0.10 - 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 - 72 2. Alumina - (AI2O3) % 17 - 18 3. Iron - (Fe2O3) % 0.10 - 0.15 4. Titanium - (TiO2) % 0.03 - 0.06 5. Calcium - (Cao) % 0.05 - 0.20 6. Magnesium - (MgO) % 0.10 - 0.15 7.Soda - (Na2O) % 9 - 10 8. Potash - (K2O) % 0.50 - 0.20 9. Loss on Ignition - (LOI) % 0.10 - 0.20