1.Euro-style rectangle barrel makes temperature difference in C areas smaller 2.Innovated design of heater tightened style insures high efficiency of heat transfer and high longevity of the heater 3. According to the material and special technical demands, the material cylinder can use high quality nitrided steel 4.Various modes of pelletizing: water-cooling srtand,air-cooling pelletizing,water-ring pelletizing,under water pelletizing.etc 5.The screw elements are designed accurately and made of high tool steel 38CrMoALA or W6Mo5Cr4V2 by special heater treatment. 6.The screw configuration,barrel setup,L/D or mode of feeding and venting,screen changing,way of granulating,and control mode can be adjusted according to different material properties. 7.Various modes of feeding:single screw,twin screw,hollow screw,forced-feeding,side feeding,liquid-adding system etc
Conical twin screw force feeder Description of Conical twin screw force feeder: We sincerely advise you GS-100 conical twin screw force feeder. It can be connected with twin screw extruder, single screw extruder, rolls calendar and so on. Conical twin screw force feeder has many advantages, such as: low rotating speed, stable and steady working, high output, fully automatic etc. It is very hot because of saving labors and cost. 2. The detailed information of Conical twin screw force feeder: Motor: 11kw, WNM brand. It uses ABB AC frequency convertor. Capacity: 350-1000kg/h. Reducer: cycloid pin gear reducer, using GUOMAO brand. 3. Advantages of conical twin screw force feeder: 1)Conical twin screw force feeder is specially designed to feed big block and dough material. 2)The block material coming from kneader used to be cold then cut by hand. It wastes too much time, labor and cost. 3)While conical twin screw force feeder can solve this problem. You dont have to cut the block coming from the kneader, just using the conveyor sent the block to the conical twin screw force feeder, then it will extrude the material into single screw extruder, twin screw extruder, calendar and so on. 4)Conical twin screw force feeder saves too much time, cost and at least 2 workers for you company, whats more, it has better stability, lower maintenance, easier operation and higher capacity. 5. Suitable machine for conical twin screw force feeder: 1)Conical twin screw force feeder used on big block material or big size things. It can demand many kinds of materials which other feeders cant. 2)Conical twin screw force feeder matches the kneader. The common combinations are: kneader+ conical twin screw force feeder+ single screw extruder, kneader + conical twin screw force feeder+ twin screw extruder, Kneader+ conical twin screw extruder +mother and baby two stage compounding line. 7. Packaging and shipping of conical twin screw force feeder: a. The delivery time: within 30days. b. It will be packaged into wooden cases one by one. Before the wooden cases, it will be wrapped with PE film. The normal size is 2m/2m/3.5m. c. Shipping port: Nanjing or Shanghai.
or good plasticizing effect,we have different designs of screw and barrel for extruder or injection to meet customer's demand.Our factory manufactures with high-quality material, applying the method of hardening and tempering and nitriding, thus it enjoys the characteristics of long working life, wear resistance, and anti corrosion. Besides, the technique of hard alloy spraying or chrome plating can be used on the working surface of screw, which will make it have better using effectiveness.
1.We are a professional company specialized in manufacturing many types of screw, the barrel can be applied on all types of injection moulding machine,rubber hot-feeding extruder, rubber cold-feeding extruder, pin barrel cold feed extruder, plastic extruder with different specifications. 2.The models of screw include: Variable pitch and variable depth, variable pitch and equal depth, variable depth and equal pitch, and equal depth and pitch. Groove multi-die type, composite type, mixing type and separating type. 3. The material of screw: manufactured with high-quality nitro alloy steel, applying the method of hardening and tempering and nitriding, thus it enjoys the characteristics of long working life, wear resistance, and anti corrosion. Besides, the technique of hard alloy spraying or chrome plating can be used on the working surface of screw, which will make it have better using effectiveness.
Volumetric feeder provides low cost and easy option in batch or continuous applications, especially when the bulk density of the fed material is consistent or when precise feed accuracy is not so important for the quality of end product. Frequently volumetric feeder is used in gain-in-weight batch application since higher accuracy can be achieved. When process requirement is more demanding, volumtric feeder with gravimetric scale and loss-in-weight control can be used. Our volumetric feeder can provide reliable and stable performance. Single screw feeder is the best choice for free flowing materials, while twin screw feeder is the the best solution for difficult-handled materials. We have a full range of volumetic feeders with a number of models and different-sized hoppers to meet your specified requirements. Twin-screw volumetric feeder is applied to provide accurate volumetric feeding for poor flowing powder, fiber and flake materials. All parts which contact fed material are made of stainless steel. It is easy to disassembled for cleaning or changing parts. The special bowl-shaped hopper makes material flow from all directions into the screw evenly. It can also avoids material build-up and make feeding more accurate. Two types of hopper, symmetrical or asymmetrical, can be chosen. The standard construction material of hopper is SS304. SS316 and SS316L are optional to be used. For poor flowing materials which tends towards bridging, a vertical agitator is optional to add. For different environments, different construction materials of screw can be used. The screw materials can be SS304, SS316L, copper, carbon steel and Hartz alloy. Plywood case, 1 set/case
Applications When the bulk density of the fed material is not consistent, or when the precise feeding accuracy is critical to the end product quality, the loss-in-weight feeder needs to be used. The loss-in-weight feeder can be used in batch or continuous situations. Frequently it is applied in continuous processing, such as extrusion. During extrusion process, multiple ingredients` ratio needs to be controlled precisely. Characteristics: 1. Nice Appearance. Compared with traditional feeders, many improvements have been made in our appearance of our feeders. 2. Small Volume. Since it is small, it can be moved to a new place easily, especially when production process is changed or when production technology is improved. 3. Low Noise. Our feeders make almost no noise. 4. Convenient Cleaning and Easy Maintenance. 5. Extremely High Stability. In order to ensure precise feeding in a long run, self-detecting function is included in our feeders, which can detect mechanical wearing and the effect on feeders when frequency fluctuates, then make real-time correction accordingly. Therefore, feeding precision won`t be affected when a mechanical part is replaced or when it is being used for a long time. 6. Friendly HMI. Easy operating touch screen system. Input to the system is more humanized. An operator can master all the operations in only a few hours. 7. Wide Range. Without replace a new mechanical part, a wide range flow rate can be set. In this way, a new manufacturing technique can be shifted to quickly. 8. Excellent Control System. According to customer`s requirement, a control system can control multi-feeders while the feeding accuracy will never be affected. 9. Screw Options. Depending on the fed materials characteristics, interchangeable screws in different shape and materials can be chosen. The material of a screw can be PS, carbon steel, 304 stainless steel, 316L stainless steel, hastelloy alloy or copper. Plywood case, 1 set/case
Specification: Screw diameter: d20mm-d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Technical information Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ã 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
Specification: Screw diameter: d20mm- d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
1. Expanded fish feed processing line introduction Expanded fish feed processing line is mainly made up with raw materials treatment system, extrusion system, drying system, flavoring system and controlling system. Its core technology is co-rotating twin-screw extrusion. This line can make both floating fish feed and sinking fish feed. After changing formula, it can make dry pet food (such as dog food, cat food). 2. Expanded fish feed processing line description: 2.1 Flow chart: raw materials treatment---extrusion---drying---flavoring---cooling---packing 2.2 Expanded fish feed processing line features 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 This line is multi-function processing line, it can make floating fish fee, sinking fish feed, dog food, cat food etc. 2.2.4 Production factors can be quantified and controlled. 2.2.5 All machines and fittings can be custom-made. ODM/OEM is available. 3. Expanded fish feed samples introduction Adopting cereals, vegetable proteins, vitamins, minerals, fish meal and fish oil as raw materials, and adopting dry-type or wet-type extrusion as manufacturing technique, modern fish feed is made for both carnivorous and graminivorous fishes, which is in the form of granules or pellets situation. It improves digestibility and refining the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development, improve the sustainability of the ingredients used, and improve efficiency of feeding also contributes to sustainability.
3.The advantages of GS-65/150 HFFR compound extruder : HFFR compound extruder is totally automatic, which save 1-2 labors. And it is very easy to operate it. One worker is enough. HFFR compound extruder has better dispersion effect and accurate temperature control. The main motor of HFFR compound extruder uses smaller electric current, saving electricity and protecting environment. 4.HFFR compound extruder can also be used in such materials: low smoke zero halogen cable granules, stone paper master batch, black master batch, PVC and so on. 5. Some data of HFFR compound extruder : 1) Kneader: 75L, main motor: 110kw 2) Automatic conveyor: 2.2kw. 3) Force feeder: size: GS-100. Motor: 11kw. 4) Twin screw extruder: L/D: 36: 1, diameter: 62.4mm. Motor power: 75kw. 5) Single screw extruder: L/D: 9:1, diameter: 150mm. motor power: 55kw. 6) Die face hot cutting system: with cooling system and end with silo. 6.The package of HFFR compound extruder : it will be packaged into the wooden cases one by one. 7.The perfect service of HFFR compound extruder : We will provide you the best service as possible as we can. 1). Before sale service: a. to learn your customers situation and their desire. b. to provide the best choice as customers want. c. to welcome to visit our factory and try to run the machine to customers. 2). After-sale service: a. to produce the machine as far as we can, and the delivery time will be within 45 days. b. to invite customers to test the machine before shipping. c. to arrange experienced engineers to install the machine in customer's factory and teach works how run it. d. to answer customers within 12 hours if have any problems, and will send engineers to solve it if necessary. e. to care about customers usually and visit customers factory if possible. 8. The delivery time of HFFR compound extruder : within 30days. 9. HFFR compound extruder is very hot at home and abroad. Such as: At home: Jiangsu province, Anhui province, Zhejiang province, Guangdong province, Henan province, Shandong province Abroad: U.S.A , U.K, Turkey, Mexico, Indonesia, Malaysia, Korea, France, Kazakhstan, Algeria and so on.
TPR compounding extruder pelletizing line TPR extruder compounding and pelletizing line: TPR extruder compounding and pelletizing linemainly uses: Mixer---Twin screw extruder ---Water ring Cutting system. TPR extruder compounding and pelletizing linecan also use Underwater cutting system, which is beter function and high leveled quality. TPR extruder compounding and pelletizing lineis very popular and ecomonic. TPR extruder compounding and pelletizing linehas higher quality, fully automatic and better dispersion. Most advanced company use this type. TPR extruder compounding and pelletizing lineAfter-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay. TPE elastomer extruder granulator: Designed as customer's request. This GS-75 type can make 500kg/h.
TPR compounding extruder pelletizing line TPR extruder compounding and pelletizing line: TPR extruder compounding and pelletizing linemainly uses: Mixer---Twin screw extruder ---Water ring Cutting system. TPR extruder compounding and pelletizing linecan also use Underwater cutting system, which is beter function and high leveled quality. TPR extruder compounding and pelletizing lineis very popular and ecomonic. TPR extruder compounding and pelletizing linehas higher quality, fully automatic and better dispersion. Most advanced company use this type. TPR extruder compounding and pelletizing lineAfter-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay. TPE elastomer extruder granulator: Designed as customer's request. This GS-75 type can make 500kg/h. TPE elastomer extruder granulator TPR compounding extruder pelletizing line
TPV compounding extruder pelletizing line : TPV compounding extruder pelletizing line mainly uses: Mixer---Twin screw extruder ---Water ring Cutting system. TPV compounding extruder pelletizing line can also use Underwater cutting system, which is beter function and high leveled quality. TPV compounding extruder pelletizing line is very popular and ecomonic. TPV compounding extruder pelletizing line has higher quality, fully automatic and better dispersion. Most advanced company use this type. TPV compounding extruder pelletizing line After-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay. TPE elastomer extruder granulator: Designed as customer's request. This GS-75 type can make 500kg/h. TPV compounding extruder pelletizing line company information: We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as: --Single screw extruder pelletizing line --Twin screw extruder pelletizing line --Kneader-force feeder-Extruder pelletizing line --Two stage extruder pelletizing line --Concial twin screw force feeder --ABS/PLA filament extruder for 3D printing --Plastic washing line .... For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM...
PVC compounding extruder pelletizing line PVC compounding extruder pelletizing line company information: We, Nanjing GS-Plus, are professional in manufacturing plastic extruders pelletizing machine and other machines. Such as: --Single screw extruder pelletizing line --Twin screw extruder pelletizing line --Kneader-force feeder-Extruder pelletizing line --Two stage extruder pelletizing line --Concial twin screw force feeder --ABS/PLA filament extruder for 3D printing --Plastic washing line .... For All kinds of plastic& Rubber: PE, PP, PET, PVC, PC, PA, PS, ABS, PLA, TPE, TPR, TPU, TPV, EVA, EPDM... We sincerely advise you PVC compounding extruder pelletizing line . PVC compounding extruder pelletizing line has good mixing, big output, high performance. PVC compounding extruder pelletizing line is very hot to customers. PVC compounding extruder pelletizing line mainly used to produce soft PVC pellets, for final PVC cable, PVC shoes.... PVC compounding extruder pelletizing line has very successful technical and perfact working function. PVC compounding extruder pelletizing line contacts: Twin screw extruder--- Single screw extruder---Air cooling die face hot cutting system. PVC compounding extruder pelletizing line has twin screw extruder's better dispersion funcation and also single screw extruder's stable extrusion function. PVC compounding extruder pelletizing line has many advantages: 1, Fully automatic 2, Bigger capacity 3, Better mixing 4, Excellent service 5, Saving workers 6, Lower Maintainance 7, Not easy to break down 8, We can provide Formula. PVC compounding extruder pelletizing line can also be used to make PVC recycling, WPC wood plastic pellets, CPE... PVC compounding extruder pelletizing line After-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay. PVC compounding extruder pelletizing line more information:
We sincerely advise you EVA compounding extruder pelletizing line . Our EVA compounding extruder pelletizing line has good mixing, big output, high performance. EVA compounding extruder pelletizing line is very hot to customers. EVA compounding extruder pelletizing line description: Co-rotating Twin Screw Extruders Parallel co-rotating twin screw extruders have excellent mixing performance, good self cleaning performance and flexible modular configuration characteristics which make them suitable for processing different types of material systems, and are extensively used in fields of polymer processing, foodstuff processing and chemical products, especially for various high molecular materials. In most cases, parallel co-rotating twin screw extruders are used as mixing equipments. ln processing high molecular materials, the modification process and master batch preparation of polyolefin materials and engineering plastics require sufficient and intensive mixing, which differs depending on material systems, Excellent equipment performance, reasonable mixing process, advanced combination technique and rich processing experience are the key factors determining the success and efficiency of mixing. EVA compounding extruder pelletizing line can used to suit any plastic materials according to variable screw elements combination. According to different materials, EVA compounding extruder pelletizing line use different cutting system. 1. Air cooling die face hot cutting system: PE, HDPE, LDPE, LLDPE, PE+ Caco3/talcum/Tio2, PVC, WPC, CPE, Low smoke zero halogen cable and wire and etc. 2. Water strand cutting system: PP, PE, PS, PA, PC, PET, ABS, HIPS, PPO, POM, color master batch and etc. 3. Water ring cutting system: PP, PE, TPU, TPR, TPE, EVA, color master batch and etc. 4. Fan cooling cutting system: PP+Caco3â?¦ 5. Eccentric water-spray cutting system: chemical cross linkingâ?¦. 6. Underwater cutting system: almost all materials, like TPR, TPE, TPV, TPU, EVA, PP, PET, PE, ABS, PLA, EPS, EVA compounding extruder pelletizing line After-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay.
TPR compounding extruder pelletizing line TPR extruder compounding and pelletizing line: TPR extruder compounding and pelletizing linemainly uses: Mixer---Twin screw extruder ---Water ring Cutting system. TPR extruder compounding and pelletizing linecan also use Underwater cutting system, which is beter function and high leveled quality. TPR extruder compounding and pelletizing lineis very popular and ecomonic. TPR extruder compounding and pelletizing linehas higher quality, fully automatic and better dispersion. Most advanced company use this type. TPR extruder compounding and pelletizing lineAfter-sale service: 1. Our engineer can fly to your country to install machine for you, and tell your workers how to run the machine. 2. We will provide you some tools and spare parts. 3. Before shipping, we will run the machine for you to make sure everything is okay. TPE elastomer extruder granulator: Designed as customer's request. This GS-75 type can make 500kg/h. TPE elastomer extruder granulator TPR compounding extruder pelletizing line
GS-150 Single screw extruder 1. Company information: Nanjing GS-plus is a professional plastic extruder mamufacturing company; the main products are all kinds of Plastic/Rubber extruders, such as: Twin screw extruder pelletizing line, Single screw extruder pelletizing line Kneader Single screw extruder pelletizing line Conical twin screw force feeder 3D printer filament extruder... 2. Single screw extruder information: Single screw extruder is mainly used for extruding soft, hard polyvinyl chloride polyethylene and other thermoplastics. Single screw extruder cant only produce pellets/granules with cutting systems, but also produce various plastic products, such as: pipes, plates, filaments, sheets, with other corresponding auxiliary machines. Single screw extruder has higher capacity, lower energy and better plastification. Single screw extruder uses involute gear transmission, which has lower noise, stable operation and longer working. 3. Single screw extruder mainly used in: Plastic recycling: PP/PE film, bags, non-woven fabric, woven bags, PA nylon fishing wet, PET flakes, EPS foam, Plastic rubber extrusion: connected with Kneader, Banbury... PVC, WPC... 4. Single screw extruder advantages: Good quality: screw using 38CrMoAl material, nitrigon treatment; water cooling for barrel Water cooling for barrel, Casing aluminum heater, ABB frequency convetor, Omron electrical elements If you need more information of Single screw extruder Plastic recycling single screw extruder, Single screw extruder pelletizing line, Single screw extruder,
1.We are a professional company specialized in manufacturing many types of screw, the barrel can be applied on all types of injection moulding machine,rubber hot-feeding extruder, rubber cold-feeding extruder, pin barrel cold feed extruder, plastic extruder with different specifications. 2.The models of screw include: Variable pitch and variable depth, variable pitch and equal depth, variable depth and equal pitch, and equal depth and pitch. Groove multi-die type, composite type, mixing type and separating type.
Floor leather can be divided into common floor leather, homogeneous floor leather and PVC floor leather production line. PVC homogeneous floor leather production line -- produce and manufacture PVC homogeneous leather; PVC homogeneous floor is made by a variety of colors of PVC broken particle material in a reasonable ratio, which is heated and pressed. Due to its environmental protection and ornamental, easy maintenance characteristics, it is mainly used in residential, hospital, school, factory, hotel, catering, aircraft, train, bus, hospital, entertainment hall, stadium and other public places of the ground laying materials. The PVC homogeneous floor leather production line researched and developed by Gwell company adopts advanced and practical technology to be reasonable and convenient to operate, and it can produce various of homogeneous floor leather with floral spot pattern with thickness of 2-3mm and width of 2000mm.
Floor leather can be divided into common floor leather, homogeneous floor leather and PVC floor leather production line. PVC homogeneous floor leather production line -- produce and manufacture PVC homogeneous leather; PVC homogeneous floor is made by a variety of colors of PVC broken particle material in a reasonable ratio, which is heated and pressed. Due to its environmental protection and ornamental, easy maintenance characteristics, it is mainly used in residential, hospital, school, factory, hotel, catering, aircraft, train, bus, hospital, entertainment hall, stadium and other public places of the ground laying materials. The PVC homogeneous floor leather production line researched and developed by Gwell company adopts advanced and practical technology to be reasonable and convenient to operate, and it can produce various of homogeneous floor leather with floral spot pattern with thickness of 2-3mm and width of 2000mm.