It has good performance of hydrophobicity and anti-pollution. The main model are FZSW-10KV/4KN, FZSW-22KV/6KN, FZSW 132KV/10KN.
Especially used in the railway tunnel. The main model: FQX-25KV/100KN, FQX- 25KV/120KN, FQX-25KV/160KN
45 kn disc ôb&sö type 2.Works Village balol, mehsana-balol Highway, dist. Mehsana (north Gujarat). 3.Types of insulatorsôtype-bö 4.Standard specification to which material Shall conform.Is:731, 3188/1980 and 2486 5.Dimensions of insulators: A) out side diameter 255 mm B) vertical distance between Centers145 mm C) toleranceas per is 3188 6.Creepage distance(mm) 290 mm 7.Weight of each disc4.5 kg (approx) 8. Electro mechanical strength(kn)45 kn 9.Dry power frequency withstand voltage at 50 c/s 70 kv 10.Wet power frequency withstand voltage at 50 c/s40 kv 11.Dry impulse with stand voltage of single unit A)positive wave 1.2/5075 kv B)negative wave 1.2/50 75kv 12.Dry power frequency flashover voltage of single unit at 50 c/s70 kv 13.Wet power frequency flashover voltage of single unit at 50 c/s40 kv 14.Dry impulse flashover voltage A) positive wave 1.2/50120 kv B) negative wave 1.2/50 125 kv 15.Puncture voltage 110 kv 16.Minimum visible discharge voltage9 kv 17.Packing details A) net weight per insulator4.5 kg (approx) B) no. Of insulators per Package4 nos. C) type of packingwooden crates D) gross weight of each Package22.00 kgs (approx) 18.Tolerance in dimensions, if any as per is:731 & 3188 19.Marketing of insulatorsbalaji India Month/year 20.Any other informationnil
35kV--500kV outdoor solid core post insulators are used in outdoor power stations, substations, distribution installation and electrical equipment for insulating and supporting. The insulators are suitable for use in ambient temperature from -40fª to 40 fª, partial products are used at an altitude up to 4000 meters. The insulators are divided into normal type and anti-pollution type .Anti-pollution type insulators are suitable for used in medium and heavy polluted areas. The insulators are of solid core construction which possesses advantages of long service life, ensured service safety and minimum maintenance work. In order to guarantee the mechanical property of the insulators, each porcelain piece is checked the internal fault by a ultra-sonic detect or so as to eliminate unqualified product . The insulators can be manufactured, tested in accordance with IEC60168 and IEC60273. Other standards such as ANSI, DIN and BS are also available.
Flexible composite material.
The structure of disc suspension insulators enables them form the insulator string by fitting into themselves one another as per voltage requirement. Connected fitting type: ball & socket type; clevis & tongue type Strength can be 40 kn, 45kn, 60kn, 70kn, 80kn, 100kn, 110kn, 120 kn, 125kn, 160kn, 210kn, 300kn Main type: Standard suspension insulator: Ansi type: 52-1, 52-2, 52-3, 52-4, 52-5, 52-6, 52-8, 52-9 according to ansi c29.2 Iec type: u70bl, u70bs, u100b, u120b, u160b, u210b, u300b according to iec383, bs137 Fog type anti-pollution suspension insulators Double shed anti-pollution insulators Standard exporting packing, 2520pcs/container
Line post insulator used on distribution line and transmission line upto 132kv. It is mounted rigidly on supporting structure by means of a steed or bolts. It is non-puncturable design. Connected fitting type: tie top conductor binding type and clamp top with vertical or horizontal mounting. Cantilever strength can be 5kn, 10kn, 12.5kn, 16kn. Main type: Ansi c29.7 type: 57-1, 57-2, 57-3, 57-4, 57-5, 57-11, 57-12, 57-13, 57-14, 57-15, 57-21, 57-22, 57-23, 57-24, 57-25, 57-31, 57-32, 57-33, 57-34, 57-35 Other type according to iec383 and bs137. Woods or cartons with pallet
The porcelain bushings are used extensively in electrical apparatus. Porcelain bushing is the device that enables one or several conductors to pass through a partition such as a wall or tank and insulates the conductors from it. The means of attachment to the partition, such as flange or other fixing device, forms part of the bushing. Big porcelain bushing, hollow insulator upto 1000kv: Upside down transformer bushing Capacity voltage transformer bushing Sf6 current transformer bushing Outdoor cable end bushing Voltage transformer bushing Current transformer bushing Circuit breaker post bushing Sf6 transformer bushing Oil immersed voltage transformer bushing Sf6 circuit breaker bushing Electrostatic precipitator bushing Small porcelain bushing, hollow insulators are used as the insulating elements such as the transformer bushings and wall bushings .They are designed to perform under outdoor and indoor conditions for voltage upto 36kv. Din transformer bushing: Ab250, ab630, ab1000, ab2000, ab3150, 10nf250, 10nf630, 10nf1000, 10nf3150, 20nf250, 20nf630, 20ni630, 20nf1000, 20nf3150, 30nf250, 30nf630, 30ni630, 30nf1000, 30nf3150 Woods with pallet
Current range includes 11kv to 400 kv.
Toughened glass insulators Toughened glass insulator is , up to now, not only running in china but also having been exported to oversea nearly 50 foreign counties, and has a bright future in global market. Our products can apply wiyh iec, bs, as, ansi, and din standards ete. As well as chinese standard. We are sincerely willing to have a cooperation in the world with all customers who come from anywere.
GOOT Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation material which was developed in 2006. The VIP s are constructed using a special technique by inserting the open-celled filler into a centralized sealed barrier. Using the core material which provides the structural strength and resistance for heat transfer makes the VIP extremely efficient in low thermal conductivity that has less than 0.005w/m.k. The VIP has been proven to exceed its performance than the conventional insulations by far. Vacuum Insulation panels are our new high- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The core material provides the structural strength and resistance to heat transfer. Applications: Cold insulated equipments of different industries Shipping containers Spaceflight/ Aviation Communication/ transportation Medical Refrigerators and freezers Marine and recreational refrigeration vehicles Civil refrigeration equipment Insulation for construction Advantages: 7- 10 times better insulation value then conventional insulations Thin wall, small volume, lightweight Extremely low thermal conductivity 0.005w/m.k Resistance to heat transfer among the gas molecules Non-ODS material Not harmful for the environment Meets all insulating requirements Specification: 1) Compressive Strength: 0.14MPa - 0.25MPa 2) Thickness: 10 - 35mm 3) Maximum Dimensions: 1600 x 700 x 35mm 4) Core Material: Superfine fibreglass 5) Thermal Conductivity: less than 4mw/m.k(under standard environmental condition: ambient temperature 24 C, relative humidity 50%) 6) Density: about 230kg/m3 7) Internal Pressure: 0.1Pa 8) Operating Ambient: -50 ~ 70 centi degree 9) External Tolerance of VIP: 1mm 10) Packing: carton with foam and air bubble film 11) Service life: 10-15 years under standard environmental condition 600*400*10mm, paper carton packing
Outdoor post insulator We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc. Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 40.5kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting.
800kv composite insulator
10-1000kv composite insulator
Part No 9002
Hello, We can supply petroleum products at following price and procedures: Export Grade: LOADING PORTS- ROTTERDAM/HOUSTON Origin: Kazakhstan Payments Term: MT103/23/ TT wire transfer Inspection by: SGS, INTERTEK OR SIMILAR JET FUEL A1 (AVIATION KEROSENE COLONIAL GRADE A1) Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month FOB PRICE: Gross USD 90 NET PRICE: USD 86 (Commission: Seller 50 / buyer 50) EN590 (10 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) EN590 (50 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) APPROVED FOB DELIVERY PROCEDURE 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyers logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in sellers tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyers desired duration upon successful completion of the trial order. All intermediary is paid within 48 hours and seller and buyer consider and sign contract.
Railway composite insulators are a critical component in ensuring the safety and operational efficiency of railway systems. These insulators are specifically designed to provide a durable and reliable means of securing and isolating electrically charged rails from each other and the rest of the railway infrastructure. One of the leading brands of railway section insulator on the market is YF POWER, which offers a range of high-quality insulators that are designed to meet the stringent requirements of modern railway systems. Their railway telegraph insulators are made from durable materials that are resistant to wear and tear, heat, and other environmental factors that can cause damage and impact performance. YF POWER's commitment to quality and safety has earned them a reputation as a trusted and reliable supplier of rail insulators for railways around the world. Rail Insulator's Role in the Fastening Railway railroad insulators for sale play a critical role in fastening rail systems by providing electrical insulation between the rails, preventing the flow of electric currents between the rails, and ensuring the safety and reliable functioning of the railway system. These insulators are used to secure and isolate the electrically charged rails from each other and the rest of the railway infrastructure. The rail fastening system ensures proper alignment, stability, and load-bearing capacity of the tracks, while rail insulators provide corrosion resistance, long life, and excellent electrical insulation.
Our Stay Insulators include 54-1, 54-2, 54-3, 54-4 and so on. Standard: IEC, ANSI, BS, AS, DIN, GB and etc. Color: brown, gray, sky blue and etc. Features of Stay Insulator Our porcelain stay insulator, available in models such as 54-1, 54-2, 54-3, 54-4, and more, boast a range of features to ensure optimal performance and versatility: Diverse Models: Our product line encompasses various models, including 54-1, 54-2, 54-3, 54-4, providing options to meet specific requirements and applications. International Standards: Compliant with industry standards such as IEC, ANSI, BS, AS, DIN, GB, and more, ensuring that our stay wire insulator, stay arm insulator, stay type insulators adhere to recognized global specifications for quality and performance. Color Options: Available in a selection of colors, including brown, gray, sky blue, and more. This not only allows for aesthetic considerations but also facilitates easy identification and coordination with different environments. Versatility: Designed to accommodate diverse applications, our Stay Insulators offer versatility in their use across various power distribution and transmission scenarios. Robust Construction: Engineered for durability and resilience, our insulators are constructed to withstand mechanical stresses, environmental conditions, and the rigors of long-term use in diverse settings. Comprehensive Range: Our product line includes a comprehensive range of Stay Insulators, accommodating various voltage levels and system configurations, providing solutions for different electrical network needs. Now the stay insulator price is reasonable, anything you need, please contact us. If you want to know more about stay insulator specifications, please visit our website.
There are numerous types of shaken insulators, including ED-2B, ED-2C, and others. We are an expert manufacturer and supplier of porcelain shackle insulators. For our customers, we create custom colors. Our products are resistant to aging and temperature. What is the Purpose of a Shackle Insulator? A shackle insulator serves a dual role as a critical component in overhead power distribution lines, offering both electrical insulation and mechanical support. With a U-shaped or horseshoe design, these insulators facilitate flexible and straightforward installation, allowing attachment to supporting structures using pins or bolts. Their primary purpose is to prevent unintended electrical current flow between conductors and supporting structures, ensuring a stable connection while withstanding mechanical stresses. Commonly used in low to medium voltage distribution lines, Shackle Insulators provide reliability, versatility, and ease of maintenance, contributing to the efficient and safe transmission of electricity in diverse environmental conditions. Now the shackle type insulator price is reasonable, if you have needs to to buy shackle type insulator, please contact us.
A ceramic composite insulator with excellent heat resistance and high mechanical strength is called a disc insulator, disk insulator. It works well as a fixed conductor and insulating support for transmission lines carrying high voltage and high current. This type of disc insulator can function steadily in challenging conditions like high temperatures, high pressure, and high humidity. It is typically composed of ceramic materials and has exceptional insulating qualities as well as high temperature resistance. The disc insulator comes in round or rectangular shapes, and to keep pollution from impairing insulation performance, the surface is covered with anti-pollution flashover coating. Another name for disc insulators is suspension insulators. They fall into a variety of distinct categories, such as ANSI 52-3, 52-4, and so forth. Features of Disc Insulator Disc Insulators are critical components in electrical systems, providing essential electrical insulation and mechanical support in overhead power lines. Here are key features associated with Disc Insulators: Material Composition Disc Insulators are typically crafted from materials like porcelain or composite materials. Porcelain offers high dielectric strength, while composite materials provide advantages such as lightweight design and resistance to vandalism. Sheds for Pollution Resistance The sheds or grooves on the surface of the disc insulator help prevent the accumulation of pollutants, such as dust or moisture, reducing the risk of electrical arcing or leakage. Ease of Installation Designed for straightforward installation on supporting structures, facilitating efficient deployment in overhead power line systems. Compliance with Standards Manufactured in compliance with international and regional standards, ensuring that disc insulators meet safety and performance requirements. Disc Insulators, with their combination of electrical insulation and mechanical support features, play a crucial role in maintaining the reliability, safety, and efficiency of overhead power transmission systems. More disc insulator types, please visit our website.
