Diesel Marine Engines Suppliers and Manufacturers

Yamaha Outboard Motor Information: Model: 350 HP Four Stroke V8 5.3L F350 Model Number: LF350XCA Series: Four Stroke V8 5.3L F350 HP: 350 Engine Type: V8 Displacement: 325.3ci (5330 cc) Bore x Stroke: 94 x 96mm (3.70 x 3.78 in.) Prop Shaft Horsepower: 350 5500 rpm's Cylinder Heads: DOHC / 32 valve with Variable Camshaft Timing (VCT) Compression Ratio: 9.6 RPM Range: 5000-6000 Fuel/Induction System: Sequential multi-point electronic fuel injection Fuel Type: Unleaded gasoline (minimum pump octane 89) Exhaust: In-Bank dual exhaust with Power Surge Chambers Intake: Single electronic throttle valve with 8 individual long intake tracks Ignition System: TCI, 32-bit ECM with integrated coil-in-cap ignition design Spark Plug: NGK LFR6A-11 Starting System: Electric Lubrication: Wet sump Oil Capacity: 8.2 quarts Recommended Engine Oil: Yamalube 4-M FC-W 10W-30 or 20W-40 Gear Ratio: 1.73 Shaft Length: 25 in Controls: Command Link Digital Electronic Controls Multiple Outboard Synchronization: Auto sync throttle control with twin and triple applications Trolling Throttle Adjustment: 50 rpm increments (600 - 1000 rpm range) via Command Link System Mounting Centers: 28.5 in (same as F250) Mounting Bolt Pattern: 6 bolts (same as F250 plus two additional upper bolts) Steering Angle (maximum): 32 from center, either direction Weight: 804 lb C.A.R.B. Rating: 3-Star Command Link Guages or Command Link Plus Displays: Required Command Link or Command Link Plus Digital Controls: Required Engine Sensing Warning System: Standard Engine Stop Switch Lanyard: Standard 3 Year Limited Warranty: Standard Enhanced Ultimate Corrosion Protection System (UCP-ll): Standard Electronic Fuel Injection: Standard External Tilt Switch: Standard High Output Alternator: Standard Micro-Computer Ignition System: Standard Multi-Charge Monitoring System: Standard Power Trim and Tilt: Yes Sure-Seal Tri Latch: Standard Thermostatic Cooling System: Standard Saltwater Series XL, XL4, or XL4-HP Prop: Required Remote Steering: Standard Freshwater Flush: Standard Rotation: Left

Korea STX MAN L21/31 Hangzhou Zhonggao ZGPT L21/31 Shanxi diesel SXD MAN L21/31 Shanghai Xinzhong powerCXZ MAN L21/31 Poland HCP MAN L21/31 oil injector ,name nozzle(for 1200rpm diesel) ,Qty 18 oil injector ,name O seal ring ,Qty 36 oil injector ,name nozzle lock nut ,Qty 9 oil injector ,name pressure bolt ,Qty 9 oil injector ,name adjust rod ,Qty 9 oil injector ,name pressure spring ,Qty 9 oil injector ,name nut ,Qty 9 oil injector ,name round pin ,Qty 18 oil injector ,name O seal ring ,Qty 18 oil injector ,name oil injector,Qty 9 oil injector ,name oil injector ,Qty 3 oil injector ,name block ,Qty 6 oil injector ,name nut ,Qty 18 oil injector ,name gasket ,Qty 18 oil injector ,name bolt ,Qty 18 oil injector ,name spring location jacket ,Qty 9 oil injector ,name oil injector(include :128,200,224) ,Qty 9 oil injector ,name bush ,Qty 9 H.P oil pipe ,name seal ring ,Qty 9 H.P oil pipe ,name seal ring ,Qty 18 H.P oil pipe ,name gasket ,Qty 36 H.P oil pipe ,name seal ring ,Qty 18 H.P oil pipe ,name screw nut ,Qty 18 H.P oil pipe ,name flange ,Qty 9 H.P oil pipe ,name direct input H.P oil pipe ,Qty 9 H.P oil pipe ,name thrust ring ,Qty 18

Description Crankshaft Brand MAN B&W Engine type L16/24  L21/31  L23/30  L&V28/32 L&V32/40 Quality China licensed OEM parts Korea licensed OEM parts Delivery time 90days some have in stock Competitive in price.

Diesel engine, diesel generator, generating diesel engine, marine diesel engine, agricultural machinery diesel engine, fixed power..

Diesel engine, marine engine, generator set.

Diesel generator set, marine engine, gearbox, propeller, shaft.

Diesel marine engine, marine diesel generator, diesel generator.

Marine Diesel Engines And Generator Sets.

Technical Data Engine type: Diesel, L6 Displacement: 3.0 L Intake: Turbocharged, inter-cooled Torque: 680 Nm (501ft-lb) at 1750 RPM Power: 300 HP at 4200 - 4400 RPM Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 395 kg Alternator output: 180 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering option: Hydraulic, Electronic Power Steering, Joystick Shit: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.39:1 Dimensions (XL 2 leg/ XXL 33" leg), LHW XL, 1150x2090x700mm. XXL, 1150x2293x700mm (CC32")

4108 Marine Diesel Engine.

Block configuration V8 60 degree Displacement 5.3 Liter (5330 cc) (325 ci) Prop shaft horsepower 350 @ 5500 rpm Cylinder heads DOHC/32 valve with Variable Camshaft Timing Compression 9.6:1 Full Throttle RPM range 5000 - 6000 Fuel induction Sequential multi-point Electronic Fuel Injection Fuel type Regular Unleaded (Minimum Pump Octane 89) Alternator Output 50A (40A @ 1000rpm) Gear ratio 1.73:1 Controls Command Link - Digital Electronic Controls Weight 25" shaft / 804 lbs

Engine Type 24-valve, DOHC, 60 deg. V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 220.6 (300)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 640 (25.2), U: 767 (30.2), E: 894 (35.2) Dry Weight [kg] * 288-299 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available

Engine Type 24-valve, DOHC, V6 Displacement [cm3] 4169 Bore x Stroke [mm] 96.0 x 96.0 Max. Prop Shaft Output [kW (ps)] @r/min 183.8 (250)/5500 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 643 (25.3), U: 770 (30.3), E: 897 (35.3) Dry Weight [kg] * 263-273 Starting System Electric Starter Controls Digital Electronic Control (DEC) Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available

Engine Type 4stroke 16valve DOHC Inline 4 Displacement cm3 2785 Bore x Stroke mm 960 962 Max Prop Shaft Output kW ps rmin 1471 2005500 Fuel Induction System Fuel injection Engine Transom Heightmm inch L516204 X 642253 Dry Weight kg 241242 Starting System Electric starter Controls Digital Electronic Control DEC Tilt System Power trim and tilt Lubrication System Wet sump Digital Network Available

Engine Type 16-Valve, DOHC, In-line 4 Displacement [cm3] 2670 Bore x Stroke [mm] 94.0 x 96.2 Max. Prop Shaft Output [kW (ps)] @r/min 110.3 (150) @5000 Fuel Induction System Fuel Injection Engine Transom Height[mm (inch)] X: 643 (25.3) Dry Weight [kg] * 223 Starting System Electric Starter Controls Remote Control Tilt System Power Trim & Tilt Lubrication System Wet Sump Digital Network Available

Engine Type 16Valve DOHC Inline 4 Displacement cm3 1832 Bore x Stroke mm 810 x 889 Max Prop Shaft Output kW ps rmin 846 115 5800 Fuel Induction System Fuel Injection Engine Transom Heightmm inch L 516 203 X 643 253 depending on model Dry Weight kg 175185 Starting System Electric Starter Controls Remote Control or Tiller Handle depending on model Tilt System Power Trim Tilt Lubrication System Wet Sump Digital Network Available

Engine Type 16valve SOHC Inline 4 Displacement cm3 1832 Bore x Stroke mm 810 889 Max Prop Shaft Output kW ps rmin 662 90 5500 Fuel Induction System Fuel Injection Engine Transom Heightmm inch L 516 203 X 643 253 Dry Weight kg 162166 Starting System Electric Starter Controls Remote Control Tilt System Power Trim Tilt Lubrication System Wet Sump Digital Network Available

Engine Type In-line 3 Displacement [cm3] 1140 Bore x Stroke [mm] 82.0 x 72.0 Max. Prop Shaft Output [kW (ps)] @r/min 62.5 (85) @5000 Fuel Induction System Carburetor Engine Transom Height[mm (inch)] L: 521 (20.5), Y: 572 (22.5), X: 647 (25.5) Dry Weight [kg] * 113-124 Starting System Electric Starter Controls Remote Control or Tiller Handle Tilt System Power Trim & Tilt or Hydro Tilt Lubrication System Pre-mixed Fuel and Oil

Marine Diesel Engine, Inboard, Outboard.

Marine diesel engine (2-stroke, 4-stroke) 1-1 hanshin diesel engine 4784633kw 1-2 kawasaki-man b&w diesel engine 16005600kw 2. Spare parts 3. Cpp/fpp 4. Thruster 5. Hanasys 6. Loadics 7. Kics 8. Remote control system 9. F.O. & l.O. Purifier.