Perkin Elmer RoboRack 175ul Conductive Filter Tips, Sterile We offer sterile and non-sterile tips for a variety of dispenser channel sizes and volume requirements. Tips to support liquid transfers from multiple laboratory containers including test tubes, vials, troughs, deep-well plates and microplates (up to 384-well) are available as well. Our portfolio of consumables includes both cell-based and biochemical assay platforms, reagents and kits, as well as a complete range of high quality and application-focused microplates for your assay applications, detection technologies, or plate reader requirements. Our Conductive Aerosol Barrier RoboRack MPII disposable tips for use with MultiPROBE II VersaTip Plus adapters are available in popular sizes in standard format for conventional liquid sample processing, sterile, provide liquid level sensing, and are available in ten 96-tip RoboRacks per case.
1) transparent glass pot, heat and scratch resistant materials supplied By u.K pyrex or chinese 2) maximum heating: 482 degrees fahrenheit or 250 degrees celsius 3) hot air circulation with temperature reaching 200oc in a few minutes 4) food remains succulent and juicy, nutrients and retained 5) efficient: save up to 80% energy 6) with safety push down switch and power switch 7) smokeless 8) non-toxic and non-radioactive 9) capacity: 11.0l 10) standard spare part: tongs, low rack and high rack 11) optional spare part: dual rack, roasting rack, extender ring, Scissor tong, lid holder, skillet set, steam dish, skewers, Breakfast rack, low pot 12) power: 1200w Inner packing: 1pc/gift box Box dimensions: 35.7 x 35.2 x 25cm Outer packing: 2pcs/ctn Carton dimensions: 38.4 x 37.2 x 52.5cm N.W.: 16.0kg G.W.: 17.5kg
Stainless steel Deep Fryer XJ-5K100CO 1.2L oil capacity for family use or 700g food Fondue set optional Non-stick coating optional Stainless steel deep fryer Adjustable thermostat with pilot light With hinged lid Power: 840W, 230V~50Hz / 120V~60Hz Item size:25x21x19 cm Certification: GS,CB,CE,RoHS,REACH,ETL. Normal packing standard: 6PCs/CTN 2262PCs/20' 4692PCs/40' 5286PCs/40'HQ Drop test packing standard: 4PCs/CTN 1512PCs/20' 3216PCs/40' 3568PCs/40'HQ.
Tecan 1000 ul Filtered Tip for Tecan GENESIS Natural Sterile Description: Non-pyrogenic and free of RNase, DNase, and human genomic DNA. Made from 100% virgin polypropylene. Fully autoclavable at 121 C. Available in pre-sterilized packaging. Ensure a perfect fit every time. Guaranteed reproducible and consistent pipetting results. Perfect for TECAN Genesis RSP and Freedom EVO liquid handling systems. Free sample available.
"Stand and Type" easily with the carrying case that opens quickly and easily for typing and data input on the go. Use your laptop while standing or sitting, anytime and anywhere right from the case. FlipCase for Laptops comes in three sizes. The small is for 11.6" MacBooks or netbooks, the medium is for 13.4-14" Ultrabooks, MacBooks, or other laptops, and the large is for 15.6" laptops. This pricing is specifically for the 15.6" FlipCase for Laptops Large size. The case is made with durable nylon material and is lightweight. There is a slip pocket on the outside of the case for organized storage of pens, cards, and cell phones. The gusseted storage pocket on the opposite side will carry paperwork and power cords. On the back of the case is a luggage strap to secure around your carry-on. Your laptop will sit inside the case secured by four corner straps. There is full access to ports and drives. The shoulder strap has a non-slip, curved pad for extra comfort. The hinges open and lock into the opened position to ensure perfect balance and "no tipping". The hinges then will fold down and lock into place for when you use your carrying case as a traditional laptop carrying case.
Applicationofourproducts Transportationmachinery:guiderail, conveybelt, conveydeviceslideblockseat, fixingboard, productflowlinetimingstarwheel Foodprocessingmachinery:withitsperformanceofhighwearresistance, anti-impactresistance, inadhesionresistance, non-toxicandcleanproperty, uhmwpematerialcanbeusedinplanetwheel, bottleconveycountingbolt, fillerbearing, bottleholderparts, washerguidebolts, aircylinder, gear, rollercone, chainwheelhandle, whichiseasy-cleaning, long-enduring, andanti-mildew. Papermakingmachinery:withitsperformanceofhighwearresistanceandgoodself-lubrication, uhmwpematerialcanbeusedinwatersuctiontankcover, skewguidewheels, scrapper, bearing, nozzle, filter, oiltank, frictionbar, feltcleaner. Textilemachinery:withitsperformanceofhigh-wearresistance, anti-impactandgoodself-lubrication, uhmwpematerialcanbeusedinscutcher, shockabsorbershield, contactor, crankshaftconnectingrod, pickerstick, skewrodshaftsleeve, swingrearbeam. Constructionmachinery/agriculturemachinery:bulldozerbladelining.Dumperripperlining, tractorplowinnerlining. Chemicalmachinery:valve, pump, washer, filter, gear, nuts, sealrings, nozzle, plug, shaftsleeve, threadpipe. Portmachinery/shipmachinery:shipparts, suspensionbridgesideroller, frictionblock. Ordinarymachinery:alltypesofgear, bushing, liner, slidingplate, clutch, guidingunit, brake, hinge, flexiblecoupler, roller, bearingwheel, fasteningunit, platformslidingunit. Dyeingdecor:dipdyeingmachinebearing, scrapper, slidingplate, liningwasher, seal, framingguidedisc, Cultureandsportproducts:snowdipliner, poweredsledge, skatingrinkpaver, icefieldprotectionframe. Healthcareproducts:shaperightingsurgery, artificialjoint, artificiallimb. Other:coolingmachine, nuclearpowerplantshield, electricgalvanizedparts, andultra-lowtemperaturemachineparts.Mostlyusingofitshigh-wearresistance, highanti-impactresistance, anti-coldresistance, self-lubrication.
Global Tech PMUX-E series manageable PDH has adopted the state-of-the-art technologies and advanced FPGA to provide 1E1/4E1/8E1/16E1 multiplexing and optical electrical regeneration. With plug and play modularized design, GP6 can support all kinds of customized service requirement. The equipment able to support more than 2FE with shared bandwidth 10/100/1000M. * Provide max. 16 E1 channel transparent transmission with 4 wire speed 10M/100/1000M Ethernet channels. Fully comply with G.703 and IEEE802.3 * With optical line bit rate at 155.52Mbps, reach the max. 120KM transmission distance. * 1+1 optical interfaces support forced switch and automatic protection switch. * Support Automatic Laser Shutdown on all optical interfaces. * E1 interface supports HDB3 E1 coding and comply with G.703, G.823 and G.742. * 4 Ethernet interfaces support full/half duplex auto negotiation. * Transparent transport IEEE802.1Q and flow control are provided at Ethernet Interfaces. * Sophisticated alarm function. Monitor the remote end equipment status from local end. * Support E1 loop back function on local and remote end, with convenience for equipment maintenance and management. * Support Engineering Order Wire with standard phone set. * Rack mounted chassis and standalone desktop configurations are available. * Desktop configuration provides RS232 management port. Chassis configuration provides Ethernet and RS232 management port. Both configurations support E1 in-band management. Specification Optical Interface * Wavelength: 1310nm, 1550nm * Tx Power: ¡Ý -10dBm * Rx Sensitivity: ¡Ü -35dBm * Rx Range: > 27dB * Connector: FC, SC Ethernet Interface * Work Mode: Full/half duplex, auto negotiation * Bit Rate: Support max. 100/1000M wired line Ethernet * Connector: RJ45 * Related Standard: IEEE802.3 * MDI/ MDIX auto negotiation. E1 Interface * Bit Rate: 2.048M bps * Coding: HDB3 * Impedance: 75,120 * Related Standard: ITU-T G.703, G.821, G.82 Operation Environment * Working Temperature: -10C~ 60C * Storage Temperature: -40C~ 85C * Relative Humidity: 0%~95%, non-condensing * No corrosive and solvent gas, no dust and heavy EMI * Power Supply: AC 220V, DC -48V.
IV Catheter Detaining Needle/IV Catheter with Injection Type Disposable Safety Product Details Description • Color-coded IV Cannula • Easy dispenser pack • Translucent cannula hub allows for easy detection of blood flashback at vein insertion • Radio-opaque Teflon cannula • Percision finished PTEE cannula assures stable flow and eliminates cannulas tip kink during venipuncture • Can be connected to syringe by removing filter cap to expose lure taper end • The application of of hydrophobic membrane filter eliminates blood leakage • Close and smooth contact between cannula tip and inner needle enables safe and smooth venipuncture ??1 IV cannula is consist of stainless steel needle, PTFE catheter, wings, protection tube and other parts, latex free and toxic free. Stainless steel needle is with painless-design.PTEE catheter is translucent teflon radio-opaque catheter, ensures stable flow and eliminates catheter tip kink during vein puncture; and the translucent catheter is easy to detect the blood flashback during vein puncture. Hydrophobic film filter ensures blood non-leakage. Can be with a stopper or heparin cap if need. IV cannula types: pen type, two-wing type (butterfly type), injection port type and Y type. Size: 14G, 16G, 18G, 20G, 22G, 24G Length: 3/4", 1", 11/4", 11/2", 2", 21/2" Different catheter sizes are coded by different colors
Product category: square (single layer and double layers) Model: sf-3052 Color: white or blue or red or black or any color Fabric Polyester or pongee or nylon or sateen Tops Black plastic top Tips Black plastic tips Imprinting Silk screen for logo Heart-transfer printing and digital printing for photo design Rotary printing for animal stripe design Customized Oem & odm are welcomed Sample charge According to your design Sample time 7days Bulk lead time 35days after u confirm formal order and sample Quality gurantee 100%inspection by customers, 6monthes after shipment by standard usage Features A. Eco-friendly (nickel free, lead free)£¬ce, rosh, reach test certification can be provided. B.With more than 10 years richful experiences, make world level quality umbrellas. Shipment A£®send by courier express ¨c swift delivery ( 4-7 working days) and we can get you a special price B. Send by air: arrive at destination airport fast then need you to pick it up C.Ship by sea: low shipping cost and slow delivery (15-60 days depends). Suitable for large quantity and non-urgent delivery. Moq 500pcs/negotiable
Aluminium architectural extrusions, stainless steel four bar hinges, aluminium non corrosive clothes drying racks.
We are a FDA , CE and ISO certified mask manufacturer. We make sure that all our products meets the standard of FDA and CE. 1st ply: non woven fabric 25g 2nd ply: Meltblown 25 g 3rd ply: non woven fabric 25 g The price is negotiable depend on your quantity. Provides respiratory protection, can filter particles, droplets, virus. Name:Daily protective Disposable Nose Face Mask Product Composition: Filter material, Nose piece, Earloop. Daily use: Provides respiratory protection, can filter particles, droplets, virus Instruction for use: Wear on the nose and mouth Warm tip 1. Valid for 2years, must use in term of validity 2. Single use, nonreuasable. 3.Allergic caution 4. Refer to the instructions before use. Contradictions:No Storage Humidity less than 80, Non-corrosive environment, avoid high temperature. Expire Date:2 year [Executive Standard] [Specifications] : 50 Pcs Box / 10 Pcs Individual Packing [Product grade] : Certified by CE & FDA [Validity] : 2 Years Download more information about this product Shipping Information: FOB Port: Shenzhen Lead Time: 1 - 7 days HTS Code: 6307.90.00 10 Dimensions per Unit: 20 Ã?? 10.2 Ã?? 9 Centimeters Weight per Unit: 0.22 Kilograms Units per Export Carton: 2000 Export Carton Dimensions L/W/H: 53 Ã?? 41 Ã?? 38 Centimeters Export Carton Weight: 9.3 Kilograms
AOV Solar Proucts The Sun has been a constant in this ever changing world. For millions of years, it has given us protection from winter, giving plants their daily dose of food, and done much more. Man has learnt the art of deriving energy from this major star to be used extensively in industries and even in homes. Enough sunlight reaches the earth’s surface each year to produce approximately 1000 times the same amount of energy produced by burning all fossil fuels mined and extracted during the same period. Sunlight does not have to be explored, mined, extracted, transported, combusted, transmitted, or imported. Solar energy is the most readily available source of energy. It does not belong to anybody and is, therefore, free. It is also the most important of the non-conventional sources of energy because it is non-polluting Besides the Power cuts have become an every day affair, due to the short supply of electricity in the country. Due to the ever increasing population and the augmenting demand of electricity, there will come a time when electricity will become scarce. It is a good bet to tap other forms of energy, called the alternative/ renewable sources of energy to avert a crisis situation. We understand this importance and therefore are engaged in exports of solar products.
Hydraulic refuse packers: The packer consists of a body mounted on a chassis, a tailgate with compresion mechanism, an ejection plate inside the body, the hydraulic installation and control mechanism. All the functions and load distribution of the HRP are properly arranged according to the technical specification of the chassis truck on which it is mounted. The equipment is manufactured in serial production principals taking into account the legal regulations. Body: The body is manufactured from steel plates. All the body is reinforced with U sectioned vertical steel profiles. There is dirty water tank in front bottom of the body and a discharge hose. The body is mounted on the vehicle chassis with elastic elements.Crossing members under the body pass through C sectioned subframe, thus supporting the floor plate rigidly. Ejection plate: Ejection plate moves in the NPU rails welded above from the floor to the inner sides of the body. Ejection plate has easily replaceable poliamid shoes with bolted. Ejection plate moves by means of a double acting telescopic cylinder. It is kept at the rear of the body when it is empty, and moves automatically to the front by means of a counter pressure valve as the refuse is packed in the tailgate. Tailgate: Tailgate is connected to the body with top hinges and opened upwards by means of two double acting hydraulic cylinders. It is locked automatically when it is closed. Top hinges, locking hooks and the hydraulic cylinders are placed in the same line preventing additional stress on the rear frame. There is a specially formed sealing element mounted on tailgate to prevent any dirty water leakage from the body. It is made from a rubber which resists wear and acids. There is a hopper made from wear resistant high carbon steel in the tailgate. The refuse being loaded in the hopper is pressed into the body by means of a compression mechanism powered by double acting hydraulic cylinders. There is a dirty water discharging tap under the hopper. The compression mechanism consists of a slide linearly moving in the rails on the sides of the tailgate and a showel radially moving on the tip of the slide. Movement of showel is made by the two double acting hydraulic cylinder mounted on top of the slide and movement of the slide is made by two double acting hydraulic cylinder mounted on the outer sides the tailgate keeping them out of the refuse loading area. The rails are made from thick solid steel bar and the slide has four anti-wearing high density nylon shoes moving in the rails. The shoes are easily replaceable from the outside since the rail is open type. The slide has also for centering shoes to keep it in central position securely. There is a safety bar hinged under the tailgate to be used between the body and the tailgate to keep the tailgate securely opened during the maintenance. There are also antidropping safety valves on teh hydraulic cylinders which are opening the tailgate to prevent it to fall down because of any defect even a hose burst. Hydraulic installation: Hydraulic power is obtained by means of a hydraulic gear pump mounted to the PTO on the gearbox of the chassis. Capacity of the pump is so chosen that, adjusted compression cycle is achieved in the tailgate. PTO is controlled from the cab. Hydraulic oil tank has suction filter, return filter, a venting cover, a level and temperature indicator, a ball valve at the suction line, and a discharge tap. All piping is made with cold rolled, normalised and phospate coated tubes according to DIN 2391 C norms. All the connections are of EO type and according to SAE 100 R4. All the hydraulic cylinders are made from honned tubes according to DIN 2391 C norm and hard chrome plated rods. Hydraulic cylinders are designed and manufactured by EFE. Opening-closing at the tailgate and forward-backward movement of the ejection plate are controlled manually by the two spool directional controlled valve mounted in front right of the body. The movement of slide and showel mechanism is controlled automatically by a three spool electro-pneumatically controlled directional control valve mounted on the tailgate. Lifting device is controlled manually by one spool of the valve. Container lifting device: There is a container lifting device to lift and tilt the refuse containers into the hopper. Operating sequence & electrical control: Refuse is loaded into the hopper by means of the container lifting device, then, it is pressed into the body by the slide-showel mechanism working in sequence. The operator just pushes a button. Working sequence is provided by a printed electronic card, limit and pressure switches and buttons. The control box is placed on the rightside of the tailgate and is completely hermetic. There are start, stop, emergency, driver signal and engine accelerating buttons and a switch to choose continuous and single cycle compression. When the emergency button is pressed, the compression cycle movement reverses adn stops at the beginning position. Each of the movement can also be controlled by levers located on rightside of the tailgate manually in case of any defect in electricity or in special cases. The refuse is discharged by means of ejection plate after openning the tailgate. Accessories: Container lifting system Hinged safety bar between the tailgate and the body to be used during maintenance. Rear light for night works. Two foldable operator steps at the rear with safety bars. Rotating yellow beacon. Mudguards and hard rubber flaps Dirty water tank in front of the body.
The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.
Applicable Materials: MDF/ wood/ wave panel/aluminum composite panel/ inscribed wooden slip /PVC board etc. Applicable Industries: Wood Furniture(wood door/ folding screen/ artificial fans & windows/ game cabinet/ mahjong table/ computer desk etc) large scale architecture mould/ aerospace wood mould/ automotive foam mould/ musical instrument tri-dimensional engraving/ decoration/upholster(handwriting\ art frame)and other related industries. Features: 1. Precision mould casting, high rigidity and small accumulated error. 2. Large power spindle cuts easily and quickly. 3. High speed (curve and straight line shares same speed, and curve line is more smooth. ), high efficiency. Running speed is more than 14 m/min. And 1325M\1530M can even reach to 35 m/min. 4. Two motor-driver with distinctive double rack transmission, making it work steadily for a long time. 5. Continue to engrave after point-break and bits/knife-breaking. Hold more than 9 points. 6. Professional engraving software. Such as CorelDraw, Type3, Artcam, Castmate, Proe, Artcut and other CAD/CAM software. Technical Specifications: Model: BX-1325/1530/1325M/1530M X/Y axis working area: 1300*2500/1500*30000mm Z axis working area: 120mm Platform Size: 1500*3100/1700*3600mm Max. Working Speed: 14/35m/min Max. Engraving Speed: 12/20m/min Type of Clamp: Vacuum (1325M/1530M) Interface: USB (1325M/1530M) Resolution: 0.01/0.03mm Repositioning Accuracy: 0.05mm Command: G Code*. U00*. Mmg*. Plt Software Surroundings: Windows98/2000/XP Power: AC220V/50Hz Spindle Power: 1.5/2.2/3/4.5Kw Spindle Speed: 0-24000rpm Work Mode: Stepper. Accessories Chosen By Customer: Large Power Spindle/ Imported Spindle/ Multi Spindle/ DSP Handle With USB Interface/ Vacuum System/ Servo System etc.
CO2 Laser is one kind of gas laser which produces mid-infrared light at 10.64um. This laser efficiently converts electrical energy to optical energy and thereby produces a high laser power to process the materails . Our CO2 Laser Series equiped the importing RF CO2 Laser,High-Speed Resonace Mirror System .The speed is quicker and the performance is stable.This series Laser Equipments have widely won userí»s trust depend on ití»s superior performance and reliable quality. Application & Materials: This type lasers may carving many kind of nonmetallic materials such as clothing supplementary materials, medical packing, building ceramic, drink packing, fabric cutting, rubber products, the cover of nameplate, arts&crafts, electronic parts, lether etc.The patterns clear fine, non-consume materials, stable function, the complete machine exempt the maintenance time to be possible to reach at 20, 000 hour. Type:10W,30W,50W,100W G.W.:200kg Size:1300mm*1200mm*1300mm
Item: 2014 promotional advantages of led umbrella Size: Ribs' length: 23 inches( 59 cm) Diameter: 40.5inches( 103cm) Umbrella length: 33 inches( 84cm) *other sizes are avaliable Shaft: 10mm chrome coated metal Ribs: white fiberglass ribs Fabric: 190t pongee Color: white, blue, orange or any color Handle: black plastic handle with torch light Tops: self top Tips: white nickel coated metal tips Imprinting: silk screen printing, heat-transfer printing Customized: oem & odm are welcomed Sample charge: according to your design Sample time: 7days Bulk lead time: 35days after u confirm formal order and sample Quality gurantee: 100%inspection by customers, 6monthes after shipment by standard usage Features: a. Eco-friendly (nickel free, lead free), ce, rosh, reach test certification can be provided. B.With more than 10 years richful experiences, make world level quality umbrellas. Shipment: A.Send by courier express ¡§c swift delivery ( 4-7 working days) and we can get you a special price B. Send by air: arrive at destination airport fast then need you to pick it up C.Ship by sea: low shipping cost and slow delivery (15-60 days depends). Suitable for large quantity and non-urgent delivery. Moq: 500pcs/negotiable H.S. Code: 6601990000 1pc pp bag, 10 pcs/inner box, 40pcs/outer carton Dimension: 100*27*43cm Gw: 25.8 kg Nw: 24.0kg
Product advantages: 1)Sell at factory price 2)Diversified color&no color,no difference for each lot 3)6 layer lacquer,strong&average looking 4)One year warranty 5)16 years professional experience 6)Unique solid wood structure. Features & Specification: (1) Material: 8MDF on both sides+ solid wood sketon. (2) Surface: 6 layer lacquer+CNC pattern (3) Door standard leaf size:800*2000*40 mm or customized (4) Wall to wall size:2040*860 (5) Door frame:
Endotracheal Tube An endotracheal tube is placed when a patient is unable to breathe on her own; when it is necessary to sedate and "rest" someone who is very ill; or to protect the airway. The tube maintains the airway so that air can pass into and out of the lungs. Endotracheal Tube Brief Introduction-Endotracheal Tube 1. This item is made from non-toxic PVC, consists of tube, spring, cuff, inflation line, valve, pilot balloon, and connector. 2. The reinforced endotracheal tube is used in general anaesthesia, intensive care and emergency medicine for airway management and mechanical ventilation. 3. The tube is inserted into a patient's trachea through the patient's nose or mouth in order to ensure that the airway is not closed off and that air is able to reach the lungs. 4. The endotracheal tube is regarded as the most reliable available method for protecting a patient's airway. Latex free endotracheal tube with cuff without cuff 1.with cuff or without cuff is possible 2.size from 2.0-10.0 3.standard, nasal, Oral preformed 4.clear, soft and smooth Feature: 1.Tube made from Non-toxic PVC, latex free 2. PVC tube contains DEHP, DEHP FREE tube is available 3. Cuff: its great length reduces mucosal irritation by pressure distribution against a wider area of tracheal tissue and provides improved protection against micro aspiration of fluid along the cuff 4. Cuff:it vertically provides elasticity against the tube shaft in order to buffer short-term intratracheal pressure(e.g. coughing), keeping the tube in correct position 5. transparent tube allows indentification for condensation 6. radio opaque line through the tube length for X-ray visualisation 7. gently rounded, drawn in tracheal tube tip for atraumatic and smooth intubation 8. softly rounded Murphy eyes in tube tip is less invasive 9. in blister packing, single use, EO sterilization 10. certified with ,CE, ISO Used An endotracheal tube is placed when a patient is unable to breathe on her own; when it is necessary to sedate and "rest" someone who is very ill; or to protect the airway. The tube maintains the airway so that air can pass into and out of the lungs.
Crystal microdermabrasion machine for sale General introduction: The plastic surgeon uses a device like a fine sandblaster to spray air together with the diamond tips across the face,mixing gentle abrasion with suction to remove the dead,outer layer of skin.As with other skin rejuvenation techniques,more than one treatment may be needed to reduce or remove fine wrinkes and unwanted pigmentation.It stimulates the production of skin cell and collagen,thus it is effective in reducing age spots and acne scars.It has proven to be a very popular non surgical skin rejuvenation device. Functions: 1.Crystal dermabrasion Crystal Microdermabrasion: a procedure that uses fine crystals and a controlled vacuum to exfoliate the skin. After the treatment, the skin has improved texture and softness, as well as fewer imperfections such as wrinkles and acne scars. The skin is washed to remove excess oil and dirt. Then, a stream of aluminum oxide crystals is targeted over the area. The crystals abrade away old, dead skin cells, which the vacuum then picks up with gentle suction. This promotes the growth of collagen and new, rejuvenated skin. Moisturizers and sun block are then applied to the treated area. 2.Diamond dermabrasion The diamond microdermabrasion (crystal-free) system replaces the micro-crystal flow with a diamond tip wand. Areas closer to the eyes and mouth can be abraded more accurately with diamond abrasion - no risk of stray crystals. Provides a Non-Surgical skin resurfacing procedure by using sterile diamond heads to peel and rub off the dead cells at the top skin layer followed by vacuuming/suction removing particles along with any dirt and dead skin. This procedure removes skin debris, scars, blemishes, wrinkles and uneven pigmentation of the skin. Moderate usage of diamond dermabrasion accompanied with skin products that penetrate through the top skin layer and reach the dermis level help to replenish natural nutrients and restore cell activity promoting healthy skin. 3.Auto Clean Automatically vacuum to prevent clogging. Why are you choice our company: Advantage: 1.CE Certificate 2.Short delivery 3.Quality warranty 4.Factory Price 5.Can save your tme. 6.Sample order is available. It can make the female more and more beautiful & confident. Specification: Model AU-8304A Voltage 110V/220V GW 18.5 kgs Frequency 50~60Hz Packing size 57*46*38cm Approve CE
