Machining titanium alloy Export wood cases package.
Advantages: * High density (17.0~18.5g/cm3). * Good machinability. * Good mechanical properties * High modulus of elasticity * High absorption capacity against x-rays and v-rays * Harmless to the health and environment.Applications: * Protection shields for nuclear radiation * Balancing weights * Substitutional material for Uranium * Electroheat upsetting anvil block * Balls in bomb. * High voltage electrical contact * Electrodes for Resistance WeldingProduct Standard: ASTM B 777 99.
Advantages: * high density (17.0~18.5g/cm3). * good machinability. * good mechanical properties * high modulus of elasticity * high absorption capacity against x-rays and v-rays * harmless to the health and environment.Applications: * protection shields for nuclear radiation * balancing weights * substitutional material for uranium * electroheat upsetting anvil block * balls in bomb. * high voltage electrical contact * electrodes for resistance weldingproduct standard: astm b 777 99 . Export cartons
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. Available sizes: Custom diameter & sizes, random mill lengths International specification: ú¿¦·+O¦µ+¦ú¬ Rods/bars/tubes: astm b196, 251, 463; sae j461, 463; ams 4533, 4534, 4535; ams4650, 4651; Rwma class 4 Strips:astm b194, ams4530, 4532; sae j461, 463 Sheets: astm b194 Wires:astm b197, ams4725, sae j461, 463 Plates:astm b194, sae j461, 463; ams4530, 4533, 4534, ams4650, 4651; rwma class 4. European standards: cube2, din 2.1247, cw101c to en Note: Astm: american society for testing and materials Sae: society of automotive engineers Ams: aerospace materials specification (published by sae) Rwma: resistance welder manufacturers' association Note: unless otherwise specified, material will be produced to astm. Plywood cases/plastic pipes/wooden cases
Ca-Al alloy Specification: Ca: 60-95%, Al: Balance Size: 30-100mm (Irregular lumps), 3-30mm(coarse granules),
Ca-Mg alloy Specification: Ca: 30%, Mg:70% Size: 30-100mm (Irregular lumps) or as per clients requirements. Application: Additive of middle alloys for metal instrument founding mills.
Characteristics: High saturation flux density High permeability Low coercive force Low core losses(1/3-1/5 of silicon steel) Low excitation current Good thermal stability and aging stability.
The material replaces silicon steel and its operating frequency can be up to 50Hz to 10KHz in case of working as various high and medium frequency transformer cores of different power. Working as high power switched mode power supply reactor cores, the operating frequency can be up to 50KHz.It is applicable in fields of high and medium frequency heating power supply, transformers of inverter welders, UPS, power transformers, switched power supply transformers and high energy accelerators etc. Cartons
The advancement in technology of high frequency inverters has culminated in several advantages. Some of those incl ude the physical size of the inverter being smaller, a lighter weight of the individual unit and a higher efficiency of the working unit. The main transformer is heart of a power inverter, with a working frequency up to more than 20kHz. The transformer, in the past, was made from a core of silicon steel, but that can no longer meet the technical requirements of today's industrial and technological world. Though Ferrite has a lower loss at high frequencies, but it has a lower saturation flux density and not much reduction in volume and weight, further more, the ferrite metals have lower curie temperatures and less thermal stability. In contrast, Fe-based nano-crystalline structure material has much better magnetic properties. This material integrates the advantages of silicon steel, NiFeNb alloy and ferrite resulting in high flux density, high permeability, low currency loss, and good thermal stability, making it the best material for manufacturing power inverter cores.
Characteristics: High saturation flux density High magnetic permeability Low coercive force Low core losses Good thermal stability Wear and corrosion resistant High cost efficiency. Spools and cartons
The product is used as compound deoxidizer, desulfurating agent and alloying agent in the steel-refining industry and as a reducer in the producing low-carbon ferromanganese.
Our mainly export 75# & 72# fesi or other spec by buyer's option.We has already carried out steady operation in over 20 countries and regions, and have got many good opinions from new and old customers. Fesi75:si:75% al:2.0% max mn:0.4% max. P;0.04% max
Implementing standard:yb/t.066-1995
Titanium & titanium alloy Tiatnium bar / rod from 2.0mm - 250mm Titanium plate / sheet Titanum tube /pipe Titanium wire / welding wire Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr11, Gr12, Gr15, Gr17, Ti6Al4V ELI, Ti3Al2.5V Standards: as per ASTM, AMSE, AMS etc Standard exporting package
This is a type of product can be use in forging and casting alloys welding due to it has silicon of 5% with the good performance in anti-thermalcrack Mig-wires(mm)í¡0.8;0.9;1.0;1.2;1.6;2.0;2.4 Tig-rods(mm)í¡1.6;2.0;2.4;3.2;4.0;5.0;6.0
Tantalum alloy(Ta2.5W)
Nickel alloy wire 6.Nickel wire(alloy 201) Less carbon content than nickel 200, Chemical compositions: CCuFeMnSiSNi Max 0.02Max 0.25Max 0.40Max 0.35Max 0.35Max 0.01Balance A low carbon variety of nickel alloy 200 possessing low annealed hardness and a very low work-hardening rate desirable for cold forming operations. It is highly resistant to corrosion by neutral and alkaline salt solutions, fluorine and chlorine. Has been used in food and synthetic fiber processing, heat exchangers, chemical and electrical industries. Shanghai tankii alloy material co., ltd Is specialized in production of ni-cr alloy, cu-ni alloy, fechral, thermocouple wire, pure nickel and other precision alloy materials in the form of wire, strip, rod, bar and plate. Diameter 0.15-10mm
Metal products Stainless steel carbon steel alloy Standard export packing. Special packing available on request.
Supply of several non-ferrous cast alloys in the shape of ingots, The alloys available include: 1)Aluminum alloys Pure A1 , Al- Si, Al-Mg , . etc. 2)Copper alloys Pure Cu, Cu-Zn 3)Zn alloys 4)Pure Lead and lead alloys. Specification of the supplied ingots. 1.Sizes in the range of : Al65178 Cm Cu4677 Cm 2.Weights: Al12 Kg Cu14 Kg Zn10 Kg Pb50 Kg Moreover, alloys with specific chemical composition could be supplied according to the customer request.
All the handle can be fixed in sash door, wooden door, frame door optional and cabinets, the usefulness is very widely. The surface of all the stainless steelhandle can be high-quality processed for smooth , abrasive, half-abrasive. The products are more and more beautiful. All handles can be manufactured to meet customer special material requirements, including stainless steel, steel and zine alloy.