Specification for Copper Wire Millberry Product Name: Copper Wire Millberry Material: 99.9% pure copper wire without any impurities Appearance: Clean, uncoated, and untinned copper wire Diameter: 1.6mm to 3.0mm Purity: 99.9% minimum copper content Packaging: Bundles or coils securely strapped with steel straps Each bundle or coil to be clearly labeled with product details Packaging to be suitable for long-distance transportation and storage Chemical Composition: Copper: 99.9% min Lead: 0.005% max Zinc: 0.003% max Phosphorus: 0.01% max Iron: 0.005% max Aluminum: 0.005% max Cobalt: 0.002% max Sulphur: 0.005% max Applications: Used in electrical and telecommunications industries Suitable for manufacturing wires, cables, and other electrical equipment Origin: Produced from high-quality copper scrap and undergoes rigorous quality control measures Certifications: Certificate of analysis confirming chemical composition and purity Compliance with international standards (e.g., ASTM B187/B187M-20, EN 1977:2013) Note: This specification is intended to provide general information about Copper Wire Millberry. Specific requirements may vary based on customer needs and industry standards.
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
Hallo Good Day we can offer copper millberry and Copper Cathode - ALSO Aluminium Ingot and AL Alloy Only Serious Buyers May Contact - Prefer Direct Importers Or Agents/mandates Who Have Direct Contact With End Buyer Payment - DLC/SBLC PAYABLE AT DESTINATION AFTER SGS NEED LOI FROM END BUYER FOR CONDUCT DD WE PROVIDE 2% PB ONLY SERIOUS BUYERS/MANDATES/BROKERS PLEASE CONTACT MUJIB ALGA GROUP INDIA
Specification for Aluminum Scrap 1. Scope This specification defines the quality and requirements for aluminum scrap intended for recycling and manufacturing. It ensures consistency, quality, and suitability for various applications. 2. Material Requirements 2.1. Composition Aluminum Content: Minimum 90% by weight. Contaminants: Maximum 2% by weight of non-aluminum metals (e.g., steel, copper). Maximum 1% by weight of non-metallic materials (e.g., plastic, rubber). Moisture content should not exceed 2% by weight. 2.2. Form and Condition Types: Can include profiles, sheets, turnings, wire, and castings. Size: Must be manageable for handling and processing, typically not exceeding 1 meter in any dimension. Cleanliness: Free from excessive oil, grease, and other foreign substances. 3. Packaging and Labeling Packaging: Scrap should be securely packaged or bundled to prevent scattering and contamination during transport. Packaging materials should not contaminate the scrap. Labeling: Each package should be clearly labeled with: Supplier name and address. Net weight. Scrap grade and type. 4. Inspection and Testing Visual Inspection: Performed to check for visible contaminants, appropriate size, and cleanliness. Chemical Analysis: Periodic testing to verify aluminum content and contaminant levels. Moisture Test: Conducted to ensure moisture content compliance. 5. Documentation Certificate of Analysis (CoA): Provided with each shipment, detailing the chemical composition and confirming compliance with this specification. Bill of Lading: Including details of the shipment, weight, and scrap grade. 6. Compliance and Rejection Compliance: All supplied scrap must meet the requirements outlined in this specification. Rejection: Material not meeting these requirements will be subject to rejection and return at the supplier's expense. 7. Safety and Handling Handling: Appropriate safety measures should be taken to prevent injury or contamination during handling and transportation. Personal Protective Equipment (PPE): Workers must use suitable PPE, including gloves and eye protection. 8. Environmental and Regulatory Considerations Compliance: Must comply with all relevant local, national, and international regulations regarding waste and recycling materials. Environmental Impact: Suppliers are encouraged to follow environmentally friendly practices in the collection and processing of aluminum scrap.
Plastic scrap, plastic scrap, ldpe, hdpe, industrial films, post industrial resins, copper electrical motor scrap, insulated copper wire.
Mainly Used in making wires, cables, brushes,etc. Commonly used to make magnetic instruments, such as compasses, aviation instruments, etc. Can be made into tubes, rods, wires, strips, strips, plates, foils and other copper. Used in electric power, electronics, energy and petrochemical, machinery and metallurgy, transportation, light industry, emerging industries and other fields. Weight of each sheet 125kgs(+/-1%) Net weight of each pallet 2mts(+/-1%) Min. weight in each container 20 mts approx Gross weight of each container 22.20 mts approx Dimendions 914*914*12 Thickness 0.1mm~200mm.
We consistently take "Quality First and Sincere Operation" as the principle, and do our best to meet the requirements from our customers At home and abroad. Looking forward to your inquiry, I will reply to you at any time. Company Information Our company supplies different kinds of products. High quality and favorable price. Weâ?²re pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price. Specification Wire diameter: 0.20mm, 0.25mm, 0.30mm Weight: 3kg, 5kg, 7kg, 15kg, 20kg Weight / spool: 3 kg, 5 kg, 7 kg, 15 kg, 20 kg Tensile strength: 1000 N / mm2, 900 N / mm2, 500 N / mm2, 450 N / mm2, N / mm2 Purity:99.9% min Supply Ability:5000 Metric Ton/Metric Tons per Month Name Copper wire scrap (Millberry) 99.78% Item Standard (%) Results(%) Purity (%) â?¥99.78 99.9 Carbon 0.03 0.03 Coblet
We are looking for substantial buyers who are end user or agent regarding Copper Wire Scrap. As this matter, we can supply this good as very high quality, competitive price and short delivery by our best service. So please notice the following specification. - Commodity : COPPER WIRE SCRAP: - Origin : Kazakhstan, Bolivia, Mexico and others - Purity : 99.99% - Loading port : TBA - Capacity : 5000MT PER MONTH - Minimum Quantity: 100mt monthly - Trial Quantity : 100mt to 1,000mt max - Shipment : TBC - Max 30 days. weekly or monthly. - Payment : By 100% at sight DLC at loading port. For monthly Order DLC is paid at destination port - Inspection : SGS / Equivalent at port of loading SPECS COPPER WIRE SCRAP 99.99%. COPPER: 99, 9% CARBON: 0.03% COBLET:
Chemicals, minerals, agro products, steel, aluminium, copper, scaffolding products, minerals, scrap, washing machine parts, refrigerator parts, micro oven parts & auto parts..
Metals and mineral ores, pig iron, steel billets , copper cathodes, coils, copper mill berry and manganese ore, mill scale, pink salt, charcoal and firewood, coffee beans, tapioca flour, wood, cocoa, vanilla beans, metal scrap, sugar, palm oil and chemicals.Commodity trading company