Honeycomb Board Suppliers and Manufacturers

high quality from famous paper mill

Characteristics: * Feature: Paper faced * Thickness: 12.50mm - 15mm * Width: 1200mm * Length: 2000-3600mm * Edge:Tapered or square edge * Raw Material: High purity gypsum powder * Application: Partition wall, cladding, suspended ceilings * MADE IN TURKEY Advantages: Prevents the passage of smoke and limits the spread of fire. The structural elements of the building are protected thanks to the high resistance of the plate against fire. The time to act and to leave the premises is extended (our 12.5mm thickness boards give 125 minutes of fire resistance if wall system is applied properly).

Chamber drying: Grade 1 = 950 euros/m3 (humidity up to 12%) Grade 2 = 850 euros/m3 (humidity up to 12%) Grade 3 = 750 euros/m3 (humidity up to 12%) Freshly sawn: Grade 1 = 850 euros/m3 (natural humidity) Grade 2 = 750 euros/m3 (natural humidity) Grade 3 = 650 euros/m3 (natural humidity) Prices are indicated on the terms of FCA, Ukraine.

Drastically improve the look of your roof while protecting it with Newoline Corrugat-ed Asphalt Roofing Panels. Newoline Roofing Sheets are made of organic fiber impregnated with bitumen, heat-resistant resin and mineral pigments, making the color of the sheets bright and non-fading from the sun's rays. This infu-sion process creates a material that is extremely durable and long-lasting! Newoline roofing sheets provide an extremely tough weather protective barrier that is waterproof, rustproof, fungus-proof, non-combustible and chemically resistant to acids, alkalis, industrial gases and UV rays! This means that its virtually mainte-nance free, so you can apply it and enjoy it for many years to come!

WIDTH: 48,5 cm LENGTH: 200 cm COLORS: RED AND GREEN PACKING: 20 PIECES IN A PACK

General KYN28A-12 type metalclad withdrawable switchgear is  a complete set of three phase AC indoor device and applicable to the singlebusbar and single busbar section power system of which the rated voltage is 3.6 to 12 kV,the reated frequency is 50/60Hz,Having perfect"five prevention"function,Used for power reception and power distribution,the device is mainly used in power plant,transformer substation,industrial and mining enterprises and high building,Having the function of controlling,protecting and monitoring the circuit.     Standards: - KYN28A-12 switchgear meets the following domestic and international standards: IEC62271-200, GB3906, GB/T11022, DL/T404, etc..   Working condition: Normal working condition Ambient temperature: - Maximum temperature +40 C - Average value is no more than +35 C - Minimum temperature -15 C Ambient humidity - Daily average relative humidity of 95% and below - Average relative humidity of 90% and below - Maximum altitude of 1000 meters of the place of installation - Earthquake intensity is not more than 8 degrees, there is no fire, explosion danger, serious pollution, chemical corrosion and violent vibration. Technical data:

Used LCD monitor We can supply used computer scrap, monitors, lcd monitors, tubes, and computer scrap, any quantity. In container packing.

Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).

SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).

Avantages Safely, light, flexible, soft Thermal conducitivty and thermal average Warmth-keeping and energy- saving Very high thermal efficiency Table for to use in the carry heating product such as heating pad, heating insole heating gloves.

All kinds of blockboard from 14mm. Up to 30mm. Thickness; for indoor & outdoor use

All kinds of blockboard from 14mm. Up to 30mm. Thickness; for indoor & outdoor use

Temperature signs can be produced in any size and shape. Technical specifications include; - Can be produced in desired size and shape - Adjusted via a radio frequency remote controller - Does not need to be re-adjusted on blackouts - Can measure temperatures below zero - Low power easy to use - Optional humidity sensor - Optional alarm clock - No regular servicing needed after installation - Technical support for problems.

Full Colour LED Screen products can show TV, video, pictures, photos and animations in full color (16 millions of colors). Thesel devices are controlled using a computer and can show AVI, MPG, WMV, JPG, BMP, GIF, SWF files. Theyl devices can be remotely controlled using Wireless, Ethernet, optical fiber, ADSL, PPP kind of methods. Possible pixel pitches are 5mm, 7,62mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 25mm, 31.25mm, 45mm and 55mm.

Fibrolite main components are wood wool, cement and water Fibrolite panels are manufactured from wood-wool impregnated with rapid hardening portland cement under pressure to form building slabs that are robust, durable and structurally strong. The fibers are mineralized, a procedure which, while retaining the mechanical properties of the wood, stops the process of biological deterioration, renders the fibers completely inert and increases their level of fire resistance.

33x1250x2150mm 35x1250x2150mm 38x1250x2150mm 60x1250x2150mm Packed on pallets

Marilyn - multimedia kiosk Multimedia kiosk produced in mdf panels Monitor lcd 15" personalcomputer disposible in touch screen or keyboard interface. Ce certification 12 pcs dimension (hxwxp)150x60x50; 26kg

Blockboard Core is made of spruce, we can also sell core material Core material is consist of one layer or two layers; depends on the thickness Face veneer is from beech, spruce or poplar 30, 40 pieces