IPS-14S Syringe Pump The IPS-14S Syringe Pump is an advanced dual-channel fluid handling device designed to meet the demanding requirements of various industries. With its versatile features and precise control, the IPS-14S offers reliable performance for a wide range of fluid delivery applications. Key Features: Independent Syringe Channels: The IPS-14S features two independent syringe channels, allowing simultaneous operation of different fluids or separate control over each channel. This versatility enables efficient handling of complex fluid delivery tasks. Wide Syringe Compatibility: Compatible with glass, plastic, and steel syringes, the IPS-14S supports syringes ranging from Hamilton 0.5 l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm). This broad compatibility provides flexibility to users for various volume requirements. Precise Flow Control: With a flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14S ensures accurate and consistent fluid delivery. Its stepper motor and microcontroller with Microstep Drive technology offer precise control over flow rates with a resolution of 357 nm/�¼step. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and user-friendly microcontroller software, the IPS-14S provides an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-14S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters for optimal performance. This adaptability ensures precise handling of fluid delivery tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: 5 Steps Operation Mode: Enables users to program up to 5 different steps for precise fluid handling. Saving and Recalling Recipes: Allows users to save and recall up to 5 recipes for convenient operation. Repeating Cycles: Capable of repeating recipes up to 50 cycles, enhancing efficiency in repetitive tasks.
IPS-14 Syringe Pump The IPS-14 Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-14 ensures reliable performance and precise control over fluid delivery processes. Key Features: Independent Syringe Channels: Equipped with two independent syringe channels, the IPS-14 allows for simultaneous operation of different fluids or independent control over each channel. This feature enhances flexibility and efficiency in multi-channel applications. Wide Syringe Compatibility: The IPS-14 supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-14 ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-14 is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: No Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 257 mm, Height (H): 137 mm Weight: 3.3 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13RS Syringe Pump The IPS-13RS Syringe Pump is an advanced dual-channel device designed to meet the complex fluid handling requirements in various industries. With its precision engineering and innovative features, the IPS-13RS ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13RS allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13RS supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13RS ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13RS is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13S Syringe Pump The IPS-13S Syringe Pump is a sophisticated dual-channel device designed to meet the complex fluid handling requirements in various industries. With its advanced features and precision engineering, the IPS-13S ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13S allows for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13S supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13S ensures precise and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/ step. Intuitive Interface: The IPS-13S is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Additional Features: 5 Steps Operation Mode Saving and Recalling Subsequently Up to 5 Recipes Repeating recipes up to 50 Cycles Double-channel design for simultaneous operation Wi-Fi connectivity for enhanced functionality Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed)
IPS-13R Syringe Pump The IPS-13R Syringe Pump is an advanced dual-channel device designed to fulfill complex fluid handling requirements across various industries. With its precision engineering and innovative features, the IPS-13R ensures reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: Equipped with two interdependent syringe channels, the IPS-13R enables simultaneous and coordinated fluid handling operations, optimizing efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13R supports a wide range of syringe types including glass, plastic, and steel. It accommodates syringes from Hamilton 0.5 �¼l (ID: 0.103mm) to Monoject 140 ml (ID: 38mm), providing versatility to meet various volume requirements. Precise Flow Control: With a comprehensive flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13R ensures precise and consistent fluid delivery. Its stepper motor, coupled with a microcontroller featuring Microstep Drive technology, allows for accurate flow rate control with a resolution of 357 nm/�¼step. Intuitive Interface: The IPS-13R is equipped with a 4.3-inch Resistive Touch TFT LCD screen and intuitive microcontroller software, offering users a user-friendly interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: Users can adjust flow rates even during the pumping process, enabling fine-tuning of parameters for optimal performance. This adaptive capability ensures precise handling of fluid handling tasks with flexibility and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 211 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 3.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double-channel design for simultaneous operation 4.3 Resistive Touch TFT LCD screen Microcontroller software for advanced control User-friendly interface for ease of operation High-precision pumping for accurate fluid handling
IPS-13 Syringe Pump The IPS-13 Syringe Pump is a highly versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-13 offers reliable performance and precise control over fluid delivery processes. Key Features: Interdependent Syringe Channels: The IPS-13 features two interdependent syringe channels, allowing for simultaneous and coordinated fluid handling operations. This feature enhances efficiency and flexibility in multi-channel applications. Wide Syringe Compatibility: The IPS-13 accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-13 ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-13 offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-13 allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: No Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 250 mm, Height (H): 143 mm Weight: 2.9 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Double Channel design for simultaneous operation Wi-Fi connectivity (optional)
IPS-12S Syringe Pump The IPS-12S Syringe Pump is a versatile and precision-engineered device designed to meet the diverse fluid handling needs across various industries. With its advanced features and robust construction, the IPS-12S offers reliable performance and precise control over fluid delivery processes. Key Features: Wide Syringe Compatibility: The IPS-12S accommodates syringes made of glass, plastic, and steel, offering versatility in fluid handling applications. It supports syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility to users for different volume requirements. Precise Flow Control: With a broad flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12S ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance in various tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12S offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12S allows for adjustable flow rates even during the pumping process, enabling users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. 5 Steps Operation Mode: The IPS-12S offers a 5 Steps Operation Mode, allowing users to program multi-step pumping processes with ease and precision. Saving and Recalling Recipes: Users can save and recall up to 5 recipes, streamlining operations and ensuring consistent performance. Repeating Recipes: The IPS-12S enables users to repeat recipes up to 50 cycles, providing flexibility and efficiency in repetitive tasks. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.1 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional)
Elevate your interior spaces with our Custom Stainless Steel decorate recessed wall niche, a fusion of functionality, art, and personalized design. These decorating niches living room, perfect for living rooms, bedrooms, dining areas, and commercial spaces, are not just mere recesses in the wall but a statement of your unique style and aesthetic preferences. Crafted from premium stainless steel, our decorating arched wall niche stand out for their durability, sleek appearance, and resistance to the elements. But what truly sets them apart is the vast array of customization options available. From the shape and size to the color and finish, each large wall niche decor can be tailored to fit the specific design and functional needs of your space. Shapes & Sizes: Whether youâ??re looking for a traditional rectangular niche, a circular display, or an abstract geometric form, our custom fabrication process allows for endless possibilities. Optimize your space with living room niche decor that fit perfectly into your chosen area, maximizing both beauty and utility. Colors & Finishes: Dive into a spectrum of colors with our specialized finishes. From the classic elegance of brushed or polished stainless steel to bold, powder-coated colors that make a statement, our niches can complement or contrast with your existing decor. The reflective properties of polished finishes can brighten up any room, creating an illusion of more space, while matte finishes offer a sophisticated, understated look. Craftsmanship & Design: Our decorative niches wall are not just about storage; theyâ??re about showcasing your style through intricate designs and superior craftsmanship. Choose from simple, sleek lines for a modern look, or intricate patterns and textures for something more ornate. Laser-cut designs, embossed patterns, and even integrated lighting can transform a simple niche into a breathtaking focal point. Applications: In the living room, a stainless steel niche can elegantly frame your favorite artworks or family photos. In the bedroom, it offers a chic solution for night-time essentials or decorative items. Dining areas benefit from niches that display fine china or serve as unique bar spaces. For commercial settings, such as restaurants, hotels, or offices, these recessed wall niche decor add a touch of luxury and sophistication, enhancing the overall ambiance and experience for clients and guests.
### Summer T-Shirt Detailed Description #### Product Overview Our Summer T-Shirt is designed to keep you cool and comfortable during the warmest months of the year. Combining style, comfort, and functionality, this T-shirt is the perfect addition to your summer wardrobe. #### Material and Fabric - **Fabric:** 100% breathable cotton for maximum comfort. - **Weight:** Lightweight at 150 gsm (grams per square meter), ensuring it's not too heavy but still provides durability. - **Feel:** Soft and smooth against the skin, with a slight stretch for ease of movement. #### Design and Fit - **Fit:** Classic fit that is neither too tight nor too loose, suitable for all body types. - **Neckline:** Crew neck for a classic, timeless look. - **Sleeves:** Short sleeves with reinforced hems for durability. - **Hemline:** Straight hem that can be tucked in or left out for a casual look. #### Colors and Sizes - **Colors:** Available in a wide range of vibrant and neutral colors, including: - Classic White - Midnight Black - Navy Blue - Heather Grey - Bright Red - Sunshine Yellow - Forest Green - **Sizes:** From Small (S) to Extra Large (XL), catering to different body shapes and preferences. Size guide provided for accurate selection. #### Special Features - **Moisture-Wicking:** Advanced moisture-wicking technology to keep you dry and comfortable, even on the hottest days. - **Quick-Dry:** Fabric designed to dry quickly, making it ideal for outdoor activities and sports. - **Anti-Odor:** Treated with an anti-odor finish to keep you feeling fresh throughout the day. - **UV Protection:** Built-in UV protection to shield your skin from harmful sun rays. #### Care Instructions - **Washing:** Machine washable in cold water with like colors. - **Drying:** Tumble dry low or hang dry for best results. - **Ironing:** Low iron if needed, do not iron on print or embellishments. - **Avoid:** Do not bleach or dry clean. #### Usage and Occasions - **Casual Wear:** Perfect for casual outings, lounging at home, or running errands. - **Outdoor Activities:** Ideal for hiking, biking, beach trips, and other outdoor adventures. - **Sports:** Great for workouts, gym sessions, and sports due to its moisture-wicking and quick-dry properties. - **Layering:** Can be worn alone or layered under jackets, hoodies, or button-down shirts. #### Additional Information - **Eco-Friendly:** Made from sustainably sourced cotton with eco-friendly dyes. - **Packaging:** Comes in recyclable packaging, reflecting our commitment to sustainability. Whether you're headed to the beach, hitting the trails, or simply enjoying a sunny day out, our Summer T-Shirt is the versatile and stylish choice to keep you looking and feeling your best.
Homecare Medical Bed Supplier Homecare medical beds: customized comfort for immobile patients Homecare medical beds are designed to provide the highest quality care for loved ones. When a person is recovering from an injury or needs to spend a significant amount of time in bed, a regular bed may not meet their needs. Homecare medical bed include features that meet the specific needs of the patient to keep them comfortable and healthy. Homecare medical bed come in a variety of styles, but most are adjustable. Being able to elevate the head and foot area of the bed is vital to the patient's comfort and health. Adjustable Homecare medical bed take pressure off the patient's body and help reduce bedsores. The change in position also improves circulation and provides a comfortable option for reading, watching television and talking to friends and family. How does a Homecare medical bed supplier differ from a standard bed? Safety is vital for people who are bedridden for long periods of time and homecare medical beds are designed to maximize safety in the home. They come with bed rails for added safety, which can be purchased separately. From safety release systems to built-in nightlights, homecare medical beds are manufactured with patient safety in mind. Can homecare medical beds improve a loved one's quality of life? We think so - these beds allow our mobility-impaired clients to enjoy 24-hour freedom, convenience and independence. These beds also have the flexibility to adapt to life's changes. If you're recovering, an adjustable bed is just as important to you when you're on your feet again. Patients with lifelong mobility issues will find that a specialized electric hospital bed will always meet their most basic needs, even if things change later. Caring for a loved one at home will give you many benefits, including saving money and the morale boost that comes from being in the comfort of your own home for your patients. Medical beds are available in a variety of styles and designs to meet your specific home care needs. From long-term beds to bariatric beds to adjustable beds, these homecare medical beds provide comfort, support and safety for your loved one. Caring for your loved one at home allows you to experience many benefits, including saving money and the boost in patient morale that comes from living in the comfort of your own home.
1. Product Performance As an indispensable part of the hydraulic system, the performance of the hydraulic hose is directly related to the stability and safety of the entire system. Our hydraulic hose has the following excellent performance: High-pressure resistance: Made of high-strength materials, it can withstand extremely high working pressure and ensure stability and reliability under high-pressure environment. Oil-resistant and corrosion-resistant: The inner wall is smooth and made of oil-resistant and corrosion-resistant materials, which can effectively resist the erosion of hydraulic oil and other media and extend the service life. Soft and flexible: The hose has good softness and flexibility, is easy to install and arrange, and can adapt to various complex working environments. Good sealing: Advanced sealing technology is used to ensure that the hose has no leakage at the connection to ensure the normal operation of the hydraulic system. Anti-aging: After special treatment, the hose has excellent anti-aging performance and can maintain a long service life even in harsh environments. 2. Product scope of application Hydraulic hoses are widely used in the following fields: Engineering machinery: hydraulic systems of engineering machinery such as excavators, loaders, and rollers. Metallurgical equipment: hydraulic systems of metallurgical equipment such as steel and non-ferrous metals. Petrochemical: hydraulic systems of petrochemical industries such as oil fields, refineries, and chemical plants. Agricultural machinery: hydraulic systems of agricultural machinery such as tractors and harvesters. Shipbuilding industry: hydraulic systems of ships and offshore platforms. 3. Reasons to choose us Excellent quality: We strictly control the procurement of raw materials and the production process to ensure that each hydraulic hose meets high quality standards and can provide customers with stable and reliable products. Leading technology: We have a professional R&D team and advanced production equipment, and continuously launch new and high-performance hydraulic hose products to meet the ever-changing market and customer needs. Thoughtful service: We provide a full range of pre-sales, in-sales and after-sales services, including technical consultation, product selection, installation and commissioning, maintenance, etc., to ensure that customers receive timely and professional support during the purchase and use process. Reasonable price: On the premise of ensuring quality and leading technology, we provide reasonable prices to ensure that customers obtain cost-effective products and services. Brand reputation: We have been committed to building a well-known brand. With years of market accumulation and word-of-mouth effect, we have won the trust and recognition of our customers. Choosing us means choosing peace of mind and trust.
1. Raw materials: Our edge banding use high quality PVC and ABS as raw materials. Imported PVC particles comply with environmental protection standards, high purity, without any other materials, and it is also more environmentally friendly. 2. Clear texture: We are now using four color printing process by single extrusion which is more different from normal transfer printing process. It can make clear texture and looks like real wood edge banding. 3.Good abrasion resistance: All of our edge band surfaces have UV, it has high color stability, no easy to fade, anti detergent. So, cleaning agent can be used. 4. Color stable: Chuangxing's edge banding is not easy to fade. It's made of pure raw material, with scientific formula and according to the SGS standard. 5. Accurate size: Chuangxing's edge banding is produced by the imported professional assembly line, with stable quality. It won't affect the processing or use due to the size deviation. 6. Colorful design: Chuangxing matches colors by computer system, we focus on keeping same color after trim, now we have more than 400 colors of copper plates available. 7. Good flexibility: Even on a small plate with bending radius, our edge banding won't have wood grain fracture. 8. Stable expansion: the size stability of our edge banding is good, there won't be any excessive shrinkage or expansion due to a large temperature difference. 9. Small glue-line: Our edge banding is in the shape of internal bending, the hot-melt glue-line is the smallest after sealing, the appearance performance is better, and the moisture resistance will be the largest satisfied while the dust is prevented from entering. 10. The back coating of our edge banding has fluorescent agent, it can glimmer under the currency detector, so it's convenient for customer to identify. 11. Easy to processing: Our back coating is suitable for all kinds of hot-melt, so we can ensure not easy to fall and the bending will be more solid. 12.Good practical performance: Our edge banding can be uniform in thickness, smooth surface, clear texture, base color and print color, without any white appearance while trimming or bending.The bottom glue also has good effect, it has low requirement of sealing temperature, so that sealing can be more convenient and quick.
We Supply: Jet A-1, D6, EN 590 ppm 10, and Murray 16 We are not a scam. I will even tell you the refineries we have relationships with. Jet A-1: $88 EN590: $540 D6:$ .91 HOUSTON/ROTTERDAM PROCEDURE ON FOB- Jet A-1, D6, and EN 590 ppm 10 TANK TO TANK INJECTION 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice and tank storage agreement (TSA). 3. Seller provide buyer with the below listed PPOP. A. Product Passport (product analysis report) B. Irrevocable Commitment Letter to Supplier C. Tank Storage Receipt (TSR) D. Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm 4. Seller provide buyer with SGS report, Injection Report, unconditional DTA 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank to Tank injection and provide buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. PROCEDURE FOB Houston Texas - TTV/TTT â?? DIP & PAY: 1). The Buyer issues ICPO (including Buyer's passport copy, company registration, bank details) together with CIS/KYC. 2). Seller issues Commercial invoice (CI) to the Buyer. 3.) The Buyer signs CI and sends it to the Seller along BCL or MT199. 4). The Seller issues to Buyer the PPOP documents listed below on receipt of the signed Commercial invoice from Buyer: a. TSR registered with the Port Authority b. Injection report c. 24-48 hours SGS report d. Unconditional Dip Test Authorization (UDTA) e. Authorization to Verify (ATV) with SGS and with Seller's tank farm f. Certificate of origin 5). The Buyer arranges to conduct a Dip test in Seller's tank with SGS (or equivalent) officials and receives fresh SGS report. 6). Upon receiving and verifying the fresh SGS report, if the Buyer approves the result of Dip test Buyer issues CPA and Q88. Buyer issues NOR. The Seller releases the Injection scheduling agreement (TTVIA). 7). The Seller injects product into Buyer's vessel(s) or tank. After successful injection in Buyers' vessel(s) or tank, Buyer pays total cost of product via MT103. We have procedures for
We Supply: Jet A-1, D6, EN 590 ppm 10, and Murray 16 We are not a scam. I will even tell you the refineries we have relationships with. Jet A-1: $88 EN590: $540 D6:$ .91 HOUSTON/ROTTERDAM PROCEDURE ON FOB- Jet A-1, D6, and EN 590 ppm 10 TANK TO TANK INJECTION 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice and tank storage agreement (TSA). 3. Seller provide buyer with the below listed PPOP. A. Product Passport (product analysis report) B. Irrevocable Commitment Letter to Supplier C. Tank Storage Receipt (TSR) D. Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm 4. Seller provide buyer with SGS report, Injection Report, unconditional DTA 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank to Tank injection and provide buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. PROCEDURE FOB Houston Texas - TTV/TTT DIP & PAY: 1). The Buyer issues ICPO (including Buyer's passport copy, company registration, bank details) together with CIS/KYC. 2). Seller issues Commercial invoice (CI) to the Buyer. 3.) The Buyer signs CI and sends it to the Seller along BCL or MT199. 4). The Seller issues to Buyer the PPOP documents listed below on receipt of the signed Commercial invoice from Buyer: a. TSR registered with the Port Authority b. Injection report c. 24-48 hours SGS report d. Unconditional Dip Test Authorization (UDTA) e. Authorization to Verify (ATV) with SGS and with Seller's tank farm f. Certificate of origin 5). The Buyer arranges to conduct a Dip test in Seller's tank with SGS (or equivalent) officials and receives fresh SGS report. 6). Upon receiving and verifying the fresh SGS report, if the Buyer approves the result of Dip test Buyer issues CPA and Q88. Buyer issues NOR. The Seller releases the Injection scheduling agreement (TTVIA). 7). The Seller injects product into Buyer's vessel(s) or tank. After successful injection in Buyers' vessel(s) or tank, Buyer pays total cost of product via MT103. We have procedures for
Here are some important factors to consider when purchasing a home hospital bed Medical Needs: Know your loved one's specific medical needs. Different beds have different features, such as adjustable height, head and foot positioning, and side rails. Choose a bed that fits your loved one's medical condition and provides the support needed. Size and space: Consider the available space in the room where the bed will be placed. Home hospital beds come in a variety of sizes, so make sure the bed is comfortable and doesn't overcrowd the room. Adjustability: Look for a bed that offers a variety of adjustment options. These may include adjustable height, head tilt, foot tilt, and sometimes even Trendelenburg and reverse Trendelenburg positions. These adjustments contribute to comfort, pain management, and medical treatment. Weight-bearing capacity: Make sure the weight capacity of the bed is appropriate for your loved one's weight. Exceeding the weight capacity can lead to safety issues and potential damage to the bed. Mattress type: Mattresses are critical for comfort and pressure relief. Foam mattresses, air mattresses and gel mattresses are common choices. Choose a mattress that fits your loved one's comfort needs and medical condition. https://www.newcentury-medicalbed.com/sitemap.xml Side rails: Some beds come with side rails for safety. Consider whether your loved one needs side rails to prevent falls. Make sure the rails are easy to lower and raise for transfers. Mobility and portability: If you anticipate needing to move the bed around the house, consider the bed's mobility features. Some beds come with wheels and are easier to move, while others may be more stationary. Easy to clean and maintain: Home beds should be easy to clean and maintain to ensure a hygienic environment. Look for beds with removable and washable covers and surfaces. Power source: Some adjustable features (e.g., height adjustment and tilt function) require electricity. Make sure there is a convenient power source nearby and that the bed's electrical components are safe and reliable. Warranty and support: Check the manufacturer's warranty and after-sales support. A reliable warranty will give you peace of mind if anything goes wrong with the bed. User-friendly controls: The controls used to regulate the various functions of the bed should be easy to understand and operate for both the user and the carer.
Our 20ft standard containers have traveled the world, and as a result, can sometimes look a bit rough with signs of wear and tear. We guarantee that each container is wind and watertight and will serve you well as a great storage solution for many years to come! There are no holes in the structure and the wooden floor is in good condition. The container can be any color and may sometimes still have the logo of the shipping company. For most land-based purposes, like storage solutions, used shipping containers are the best option. Product Features: Durable Construction: Our used wind and watertight 20ft shipping containers are constructed with 14 gauge corrugated steel and have marine-grade plywood flooring, ensuring they can withstand harsh weather conditions and heavy cargo loads. Versatile: Our shipping containers can be used for a variety of purposes, such as storage, transportation, and even housing. Mobility: One of the primary advantages of using a shipping container is its mobility. They can be easily loaded and unloaded, and they can be transported by truck, rail, or ship. Secure: The containers are designed to provide robust security features, keeping your valuable possessions safe and protected. Made of sturdy steel, they are strong enough to resist harsh weather conditions and defend against potential break-ins or vandalism. You can also add lockboxes to further increase the level of security, as they prevent tampering or cutting off the lock. Cost-efficiency: Buying a used shipping container is more cost-effective than building a traditional brick-and-mortar storage or office space. Moreover, using it also offers more long-term savings compared to renting space at a storage facility. Customizable: We can transform a shipping container into a space that meets your specific needs. Whether you need a functional workspace, a comfortable living space, or something in between, we can customize the container to fit your requirements. Depending on your needs, you can add windows, doors, insulation, lighting, HVAC systems, and more. Eco-friendly: Recycling a used shipping container is a sustainable choice that reduces waste and helps to preserve our environment. Ample Space: With a length of 20ft, our used shipping containers are perfect for storing large equipment and bulky items such as furniture, vehicles, and appliances. Learn more here.
Hello everyone, We have been engaged in producing and exporting nuts and seeds for 18 years (2006). We export to European countries such as Italy, Austria and Switzerland, as well as to the Arab world. In Germany we work together with large corporations such as Kaufland, Metro, etc. We still have capacity available. Our passion is the distribution of high-quality, fresh nuts of Eastern European origin. Our nuts come from small farms in Eastern Europe. There the nuts are grown in harmony with nature without irrigation systems, pesticides and fertilizers and harvested by hand. It is important to us to promote and further expand these structures. Even without a seal, our walnuts are of organic quality. Our philosophy lies in meeting our customers' requirements and delivering high quality products. We attach particular importance to reliability, honesty and trust in order to build and maintain long-term relationships with our customers. We offer carefully selected premium products whose quality is constantly ensured from incoming goods to outgoing goods in accordance with the standards of ISO 9001 and ISO 22000. This guarantees the highest quality standards. You will receive quality certificates for our products with corresponding technical specifications and analysis reports. The fruits are harvested directly from private tree owners. Neither fertilizers nor pesticides are used. The nuts are only shelled after your order has been received. In addition to freshness, this guarantees an authentic, mild, nutty taste. We have different walnut categories: 1/2 - walnut kernels half 1/4 - quarter 1/8 - fraction 6-8 mm Breakage - 4-6 mm Filling - ready-made mixture for different confectionery (contains nuts, sugar, cinnamon, etc.). This filling can be made according to your wishes and recipe. The minimum order quantity with us is one pallet - 540 kg. However, you can put together the palette from several products. E.g.: 100 kg nuts, 200 kg kernels, 200 kg seeds etc. The nuts are packed in small boxes with air-permeable film (5kg per unit). This means that the nuts remain fresh during transport and storage at the customer's premises until the goods are used. We offer free advice and would be happy to create an individual offer for you. Delivery and VAT 7% are included in the price. The price can be negotiated. We are very flexible and look forward to finding a solution for you. Take a look at our other advertisements and tell us what kind of product you are looking for, we have over 100 products in stock!
Golden Sella 1509 Basmati rice is a premium variety of rice known for its exceptional quality and taste. Here's a description of this type of rice: Variety: Golden Sella 1509 Basmati rice belongs to the Basmati variety, which is highly prized for its long grains, delicate aroma, and fluffy texture when cooked. Grain Length: It is characterized by long grains which are slender and elongated. The grains typically measure about 8.4 mm to 8.5 mm in length. Color: The name "Golden Sella" comes from the golden color of the grains, which is achieved through a parboiling process. During parboiling, the rice is partially boiled in the husk, which helps retain the nutrients in the grains and also imparts a golden hue to them. Texture: When cooked, Golden Sella 1509 Basmati rice grains remain separate and fluffy. They don't stick together, resulting in a light and airy texture that is highly desirable. Aroma: This variety of Basmati rice is known for its aromatic fragrance, which is distinct and enticing. The aroma is often described as nutty or floral, adding to the overall sensory experience of the dish. Cooking: Golden Sella 1509 Basmati rice is relatively easy to cook. It requires soaking for about 30 minutes to an hour before cooking to ensure even cooking and to enhance the texture of the grains. It cooks relatively quickly compared to some other varieties of rice. Versatility: It is a versatile rice variety that complements a wide range of dishes, both savory and sweet. It pairs well with various curries, grilled meats, and vegetable stir-fries. It's also used in traditional Indian dishes like biryani, pulao, and pilaf. Nutritional Value: Basmati rice, including Golden Sella 1509, is known for its relatively low glycemic index compared to other rice varieties, making it suitable for individuals managing their blood sugar levels. It is also a good source of carbohydrates and provides some essential nutrients like B vitamins and minerals. Overall, Golden Sella 1509 Basmati rice is prized for its premium quality, delightful aroma, and exquisite taste, making it a preferred choice for discerning consumers and chefs alike. RICE SPECIFICATIONS Purity - 95.00% Natural Admixture - 5.00% Average Grain Length - 8.35 MM Moisture - 12.5% Max. Broken Grain - 1% Max. Damage/Discolour Grain - 1% Max. Immature Grain - 1% Max. Foreign Matter - Nil
1121 Basmati Rice is a premium long-grain rice variety known for its distinct aroma, delicate flavor, and slender grains. Here's a detailed description: Grain Characteristics: The grains of 1121 Basmati Rice are long, slender, and aromatic. They have a characteristic pearl-like sheen and retain their elongated shape even after cooking. This rice variety is often referred to as "extra-long grain" Basmati due to the length of its grains, which can be more than twice as long as they are wide. Aroma: One of the most distinctive features of 1121 Basmati Rice is its captivating aroma. When cooked, it emits a rich, nutty fragrance that is reminiscent of pandan leaves or popcorn. This aroma adds depth and complexity to dishes, making them more enticing. Flavor: 1121 Basmati Rice has a delicate flavor profile characterized by a subtle nuttiness and floral notes. It has a slightly sweet taste, which enhances the overall dining experience. The mild flavor of this rice makes it versatile and suitable for pairing with a wide range of ingredients and spices. Texture: When cooked, 1121 Basmati Rice grains remain separate and fluffy, with a light and airy texture. They do not clump together, making it ideal for pilafs, biryanis, and other rice-based dishes where individual grains are desired. Culinary Uses: Due to its premium quality and exquisite taste, 1121 Basmati Rice is often used in various cuisines around the world. It is particularly popular in Indian, Middle Eastern, and Southeast Asian dishes, where its aromatic fragrance and delicate flavor can elevate both savory and sweet recipes. It's commonly used in dishes like biryanis, pulao, fried rice, and desserts like rice pudding. Nutritional Value: Basmati rice, including the 1121 variety, is naturally gluten-free and low in fat. It provides essential nutrients such as carbohydrates for energy and some protein. However, like most types of rice, it is primarily a source of carbohydrates. Cultivation: 1121 Basmati Rice is primarily cultivated in the fertile regions of the Indian subcontinent, particularly in the northern states of India and parts of Pakistan. The unique climate, soil, and water conditions in these regions contribute to the rice's exceptional aroma, flavor, and texture. Overall, 1121 Basmati Rice is prized for its superior quality and is often considered a luxurious ingredient in culinary circles. Its aromatic fragrance, delicate flavor, and elegant appearance make it a favorite choice for discerning chefs and home cooks alike. Note: Supplied material will be of with below features Purity - 95.00% Natural Admixture - 5.00% Average Grain Length - 8.35 MM Moisture - 12.5% Max. Broken Grain - 1% Max. Damage/Discolour Grain - 1% Max. Immature Grain - 1% Max. Foreign Matter - Nil
Xiongcai Water Pump Motor Speed Controller Approved By China's Largest Water Pump Manufacturer In China 1. Voltage DC16~36V 2. Rated Currentï¼?10A 3. Working Tempï¼?-40ï½?85â?? 4. Working Humidityï¼?95% 5. Size: 87*84*15mm 6. Protectionï¼?under voltage, over voltage, low temperature, over temperature, plugging, reverse connection, short circuit 7. PWM speed regulation Xiongcai Technology is one of the few manufacturers providing clients with solutions and finished products. We engineer, analyze, test and supply finished products. You will see most of manufacturers provide OEM service only, they don�¢??t care about the handling, performance, even appearance, but we care all these. We take them seriously just as we value our own eyes. Five years ago, Unicent Automotive Tech, a company focused in automotive thermal management, contacted us and inquired about motor controller for automotive water pump. The client was really picky and particular, their engineer team set a standard on protection measure beyond the industry. They said they had met several suppliers, some items of the standards were unacceptable, because if all items met this extremely high standard, the cost would exceed budget. Our R&D team evaluated the list and decided to challenge the advancement works. The R&D team designed a combination of software and hardware meticulously called XCC107. In the next several months, they repeated the designing, testing, modifying, trying to have all parameters meet customer�¢??s requirements. Four months later, they achieved it. After one year test and verification in vehicle testing, Xiongcai XCC107 motor controller for water pump was approved. The product has been introducing to Unicent for 4 years till now. Xiongcai XCC107 motor controller for water pump provides protection measures including under voltage, over voltage, over current, low temperature, over temperature, plugging, reverse connection, short circuit, this means the motor controller may stop working due to some reason but never be damaged. We are one of the few engineering companies providing a full service from design to supply. Xiongcai is serving top clients in auto industries, such as NISSAN, XPeng, Jingyi Group, Risun, FAW Group, FAWDE, Feilong Auto (FLACC), Keshen, Unicent and more. Contact us for detail.
