304 NO.4 Stainless Steel 304 No. 4 stainless steel is a versatile and widely used stainless steel that has a smooth, brushed finish. It contains chromium and nickel, which give it excellent corrosion resistance and durability. 304 bright annealed stainless steel is commonly used in applications such as architecture, automotive parts, and kitchen equipment. Specification Of 304 NO.4 Stainless Steel Coil No.1 Finish Stainless Steel Plate Grades 202 / 304 / 304L / 304H / 309S / 310S / 316 / 316L / 316Ti / 317L / 321 / 321H / 347 / 347H / 904L etc. UNS No. - UNS S30400, UNS S30403, UNS S31008, UNS S31620, UNS S31603, UNS S31603, UNS S31635, UNS S31703, UNS S32100, UNS S34700, UNS S34709, UNS S8904 EN No. - 1.4301, 1.4307, 1.4845, 1.4401, 1.4404, 1.4571, 1.4438, 1.4541, 1.4550, 1.4551, 1.4539 Standard JIS, AISI, ASTM, GB, EN Place of Origin China Certification ISO Thickness Range 0.3-3.0MM Thickness Tolerance �±5%MM Surface Classification 2B Grade / Width 1250 MM / 1500 MM / 2000 MM / 04 Feet / 05 Feet and Custom Cut Width as Per Requirement Length Steel Plate Length 2400 MM / 2420 MM / 6000 MM / 08 Feet / 10 Feet / Coil Cut and Custom Cut Length as Per Requirement Technique Cold Rolled Quality High Quality Inspection Application It's the product of grinding with NO.150-180 abrasive belt. Having better gloss, discontinuous coarse lines, and thinner stripes than NO.3. For interior and exterior decoration materials. electrical appliances, kitchen equipment, video equipment, etc.. Brief Introduction: It features short, parallel polish lines and is the easiest to maintain stainless steel finish. Depending on the requirements of the application, the final finish can range in size from 120 to 320 mesh. (The higher the grit, the finer the polish lines and the more reflective the surface.) Surface roughness is typically Ra 25 microinches or less.
Applications Skin rejuvenation Skin tightening and lifting Wrinkle removal Improve skin laxity Recover skin elasticity Working Principle HIFU is a non surgical and a non laser procedure that directs high intensity focused ultrasound also known as hifu knife into the deep skin layer in order to gently heat the tissue to lift and tighten aged skin without any incisions of disrupting skin surface .Hifu technology is able to transfer the heat energy into 3-4.5mm under the surface of the skin Specialty of HIFU-Q3 1. Adopts HIFU technology 2. The treatment by HIFU is non-invasive and painless, HIFU-Q3 can works at areas that 3mm and 4.5mm underneath of skin surface, focus at SMAS, stimulates collagens increase, recover SMASs function of stretch the muscles and skin, get a perfect result of freckle removal. 3. HIFU-Q1 has 2 extra transducer 8mm and 13mm,which give you an option for body treatment: body tightening, lifting. 4. High accuracy and controllability, with the unique ultrasound skin scan system, HIFU-Q3 can lock the target area for treating precisely, easy for targeted therapy, parameters are adjustable for safe, accurate treatment. 5. Non-invasive treatment, without any downtime .Because strong energy is delivered deeply into skin without affecting the epidermis the treatment is safe. 6. Minimization of treatment affects because facial cleasing and makeup is possible even immediately after treatment.
We present to you our SENWART CS660 gasoline chainsaw. We have designed the chainsaw with the demanding professional in mind. It is equipped with a 2 stroke engine with 7.0HP / 9,500 rpm and a displacement of 92cc. Ideal for cutting large-diameter logs, forestry tasks, and for demanding high performance work. Its fuel consumption gives it performance with superior resistance and power. Our products maximize the productivity of our customers and provide excellent safety and comfort through the ergonomic design of each tool. 1. The engine case is made of magnesium alloy or aluminum alloy, CNC center machining, and good precision. 2. This chainsaw is a professional grade tool with a high quality crankshaft and carburetor for overall performance. 3. The engine provides maximum power at 9,500rpm and matches the output power at high speed to improve the working efficiency. 4. The plastic material is made of high quality nylon reinforced material with good heat resistance and physical strength. 5. Precise testing and adjustments ensure that the engine works stably at the right fuel consumption and temperature and that it will not shut down at high temperatures or be difficult to start under long-term high speed operation. MODEL: CS660 Engine type : Single Cylinder, Two-stroke, Air-cooling Cylinder diameter : 54mm*40mm Power : 5.2kW / 7.0HP Displacement : 91.6cc Working speed : 12,500rpm Idle speed : 3,300rpm Fuel tank : 825ml Oil tank : 360ml Fuel mixture ratio : 25:1(Gasoline 25 : 2-cycle Oil 1) Standard bar lengths : 36 inch/91.5cm Chain pitch/gauge : .404"/.063" Optional bar lengths : 30" - 42" Weight (without bar/chain) : 10.2kg
Product Introduction: Rectifier for gravure cylinder machinery Used in conjunction with rotogravure electroplating tanks. It has the functions of steady current, steady voltage, low ripple and soft start. Specifically for engravured cylinder making and printing industry Product Advantage: 1.Small size, light weight, high efficiency and high control precision. 2.Introduced international pulse-duration modulation technology, uses the IGBT power module from internationally-known company; 3.Enhance cathodic current density, With strong penetrability and adhesion, it can significantly quicken deposition rate of the plating coat, reduce the internal stress of coating , eliminates the hydrogen embrittlement, coating crystallizes will be more smooth and bright. 4.It has the constant voltage, constant current operating mode and The self-protection function of over current ,short circuit, overheating , phase lack ,etc .Also soft start function; 5.The case uses spray process ,The control system is sealed and isolated ,the internal structure adopts design of the resistant alkali and acid .Greatly increases the product service life ; 6.Standard antiseptic remote control box, Separate the power from plating tank, increases the product service life ; 7.We can provide 1)The digital timer alarm system; 2)Ampere-hour meter; 3)RS485 or CAN standard interface 4)4-20MA,0-5V,0-10V control signal interface ,etc.(The signal interface can be customized )
### Detailed Description of Goats for Sale #### General Information We are pleased to offer a selection of high-quality goats available for sale. Our goats are reared with utmost care, ensuring they meet the highest standards for health, productivity, and adaptability. #### Pricing - **Price per Goat**: 8,000 Kenya Shillings #### Breed and Origin - **Breed**: [Specify the breed, e.g., Boer, Nubian, Saanen, etc.] - **Origin**: [Specify the farm location, e.g., Central Kenya] #### Physical Characteristics - **Age Range**: [Specify the age range, e.g., 6 months to 2 years] - **Weight Range**: [Specify the weight range, e.g., 30 to 60 kg] - **Appearance**: [Describe physical traits, e.g., sturdy build, healthy coat, well-developed] #### Health and Care - **Health Status**: All goats undergo regular veterinary check-ups and are fully vaccinated. - **Deworming**: Regular deworming protocols are followed to ensure optimal health. - **Diet**: Our goats are fed a balanced diet comprising high-quality fodder, grains, and supplements to promote growth and productivity. #### Breeding and Productivity - **Breeding**: Our goats are selectively bred to enhance desirable traits such as high milk yield, fast growth rate, and disease resistance. - **Milk Production**: For dairy breeds, average milk yield ranges from [specify range, e.g., 3-5 liters per day]. - **Meat Quality**: For meat breeds, goats are known for their tender and flavorful meat. #### Adaptability - **Climate Tolerance**: Our goats are well-adapted to various climatic conditions, making them suitable for diverse environments. - **Temperament**: They are known for their docile and friendly nature, making them easy to handle and manage. #### Additional Information - **Certifications**: [Mention any relevant certifications, e.g., health certificates, breeding certifications] - **Delivery and Transport**: We can assist with logistics and transport arrangements to ensure safe and timely delivery.
### Detailed Description of Goats for Sale #### General Information We are pleased to offer a selection of high-quality goats available for sale. Our goats are reared with utmost care, ensuring they meet the highest standards for health, productivity, and adaptability. #### Pricing - **Price per Goat**: 8,000 Kenya Shillings #### Breed and Origin - **Breed**: [Specify the breed, e.g., Boer, Nubian, Saanen, etc.] - **Origin**: [Specify the farm location, e.g., Central Kenya] #### Physical Characteristics - **Age Range**: [Specify the age range, e.g., 6 months to 2 years] - **Weight Range**: [Specify the weight range, e.g., 30 to 60 kg] - **Appearance**: [Describe physical traits, e.g., sturdy build, healthy coat, well-developed] #### Health and Care - **Health Status**: All goats undergo regular veterinary check-ups and are fully vaccinated. - **Deworming**: Regular deworming protocols are followed to ensure optimal health. - **Diet**: Our goats are fed a balanced diet comprising high-quality fodder, grains, and supplements to promote growth and productivity. #### Breeding and Productivity - **Breeding**: Our goats are selectively bred to enhance desirable traits such as high milk yield, fast growth rate, and disease resistance. - **Milk Production**: For dairy breeds, average milk yield ranges from [specify range, e.g., 3-5 liters per day]. - **Meat Quality**: For meat breeds, goats are known for their tender and flavorful meat. #### Adaptability - **Climate Tolerance**: Our goats are well-adapted to various climatic conditions, making them suitable for diverse environments. - **Temperament**: They are known for their docile and friendly nature, making them easy to handle and manage. #### Additional Information - **Certifications**: [Mention any relevant certifications, e.g., health certificates, breeding certifications] - **Delivery and Transport**: We can assist with logistics and transport arrangements to ensure safe and timely delivery.
### Detailed Description of Goats for Sale #### General Information We are pleased to offer a selection of high-quality goats available for sale. Our goats are reared with utmost care, ensuring they meet the highest standards for health, productivity, and adaptability. #### Pricing - **Price per Goat**: 8,000 Kenya Shillings #### Breed and Origin - **Breed**: [Specify the breed, e.g., Boer, Nubian, Saanen, etc.] - **Origin**: [Specify the farm location, e.g., Central Kenya] #### Physical Characteristics - **Age Range**: [Specify the age range, e.g., 6 months to 2 years] - **Weight Range**: [Specify the weight range, e.g., 30 to 60 kg] - **Appearance**: [Describe physical traits, e.g., sturdy build, healthy coat, well-developed] #### Health and Care - **Health Status**: All goats undergo regular veterinary check-ups and are fully vaccinated. - **Deworming**: Regular deworming protocols are followed to ensure optimal health. - **Diet**: Our goats are fed a balanced diet comprising high-quality fodder, grains, and supplements to promote growth and productivity. #### Breeding and Productivity - **Breeding**: Our goats are selectively bred to enhance desirable traits such as high milk yield, fast growth rate, and disease resistance. - **Milk Production**: For dairy breeds, average milk yield ranges from [specify range, e.g., 3-5 liters per day]. - **Meat Quality**: For meat breeds, goats are known for their tender and flavorful meat. #### Adaptability - **Climate Tolerance**: Our goats are well-adapted to various climatic conditions, making them suitable for diverse environments. - **Temperament**: They are known for their docile and friendly nature, making them easy to handle and manage. #### Additional Information - **Certifications**: [Mention any relevant certifications, e.g., health certificates, breeding certifications] - **Delivery and Transport**: We can assist with logistics and transport arrangements to ensure safe and timely delivery.
### Detailed Description of Goats for Sale #### General Information We are pleased to offer a selection of high-quality goats available for sale. Our goats are reared with utmost care, ensuring they meet the highest standards for health, productivity, and adaptability. #### Pricing - **Price per Goat**: 8,000 Kenya Shillings #### Breed and Origin - **Breed**: [Specify the breed, e.g., Boer, Nubian, Saanen, etc.] - **Origin**: [Specify the farm location, e.g., Central Kenya] #### Physical Characteristics - **Age Range**: [Specify the age range, e.g., 6 months to 2 years] - **Weight Range**: [Specify the weight range, e.g., 30 to 60 kg] - **Appearance**: [Describe physical traits, e.g., sturdy build, healthy coat, well-developed] #### Health and Care - **Health Status**: All goats undergo regular veterinary check-ups and are fully vaccinated. - **Deworming**: Regular deworming protocols are followed to ensure optimal health. - **Diet**: Our goats are fed a balanced diet comprising high-quality fodder, grains, and supplements to promote growth and productivity. #### Breeding and Productivity - **Breeding**: Our goats are selectively bred to enhance desirable traits such as high milk yield, fast growth rate, and disease resistance. - **Milk Production**: For dairy breeds, average milk yield ranges from [specify range, e.g., 3-5 liters per day]. - **Meat Quality**: For meat breeds, goats are known for their tender and flavorful meat. #### Adaptability - **Climate Tolerance**: Our goats are well-adapted to various climatic conditions, making them suitable for diverse environments. - **Temperament**: They are known for their docile and friendly nature, making them easy to handle and manage. #### Additional Information - **Certifications**: [Mention any relevant certifications, e.g., health certificates, breeding certifications] - **Delivery and Transport**: We can assist with logistics and transport arrangements to ensure safe and timely delivery.
Product Introduction Double-head boring machine for gravure cylinder adopts double knife holders, four-axis servo control system, integrated casting bed, and rectangular guide rails. rotogravure cylinder boring machine Using the most advanced numerical control horizontal 45 ° inclined bed production with digital operating system.Steel Cylinder Boring Machine has sufficient strength, rigidity and good shock absorption. Product Advantage 1.Using the most advanced numerical control horizontal 45 ° inclined bed production with digital operating system. 2.The roller axis and the axis of the boring cutter head from both ends are guaranteed to be on the same axis with precision â?¤4um by high accurate test bar adjusting. 3.Both ends are processed at the same time; the efficiency is more than 3 times of the traditional processing method. 4.The roller clamping uses two sets of v-jig to fix. The boring cutter rotation speed is not controlled by the drum diameter. China boring machine manufacturers the drum maximum diameter could reach 100 mm, 200 mm, 300 mm, 400 mm or more (as clients' requirements). 5.Steel Cylinder Boring Machine chip falls on the conveying chain of the chip removal machine, collected and processed by the chip removal machine. The site is clean with a comfortable working environment. 6.Steel Cylinder Grinding Machine also has a set of external protective cover to PREVENT IRON FILINGS SPLASH with grand appearance. Simply enter the drum diameter; choose the parameters for plug hole. Very convenient operation!
Flat lock is a common type of mechanical lock. Its basic structure includes lock cylinder, lock body and handle. The lock cylinder usually contains components such as slot, sleeve, core barrel and lock plate, which are used to control the opening and closing of the lock. The lock body is made of metal, which is durable and safe. It contains the lock cylinder and contacts the surface of the door or other objects. The handle is used to manually operate the lock to rotate the lock cylinder to open or close the lock. It is mainly used for door locks of various cabinets, such as machine tools, electric cabinets, etc. According to the search results, flat locks have different types and characteristics. Maintenance and care: In order to ensure the normal use and extend the life of the flat lock, the following maintenance and care measures should be taken: 1.Regular cleaning: Use a soft cloth or cotton swab to dip a small amount of detergent (such as detergent or soapy water) and gently wipe the outer surface of the flat lock, while ensuring that no moisture or detergent residue is left on the lock hole and the internal slide. 2.Prevent dust accumulation: Keep the area around the flat lock clean to prevent dust and debris from entering the lock body. 3.Lubricate the lock core: Regularly use an appropriate amount of lock core lubricant (such as lithium-based lubricating oil) to drip on the lock core, and then insert the key to apply the lubricant. 4.Use with caution: Avoid violent impact, strong twisting or excessive force. 5.Adjust fasteners: If the flat lock is found to be loose or shaking, you can use appropriate tools to gently tighten the screws of the lock body and the mounting base. 6.Regular inspection: Regularly check whether the various components of the flat lock are normal.
We are looking for buyers for silicon ingot scrap for semiconductor applications. Product Overview Product types: Top & Tail, side pieces, ingot scraps, etc. Ingot size: 12 inch and 8 inch are the mainstream, 6 inch is a little Stock amount: Over 100 tons Product raw material: Ingot for semiconductor use (11N product) Mainly CZ products, small amount of FZ products Product characteristics Doped: Basically phosphorus and boron N type & P type (both available) Resistance value: 1 or more, 5 or more (separate storage) Carbon content: As it is 11N product, the carbon content is in PPM units. All products are inspected (N type/P type, resistance value, visual inspection) Sales method: Approximately 25 tons delivered by container MOQ: 25 tons/month, 1 year continuous contract (Spot trading is also possible, but the unit price will change.) Payment method: 100% advance payment Delivery method: EXW or delivery to a designated port (additional cost required) Unit price: 7USD/kg Submission of quality inspection certificate: Inspection certificate as evidence of the shipped product Documents to be submitted: Shipping judgment slip (X-ray fluorescence analysis data attached) / for each shipment Judgment items:Â Visual check ... No foreign matter, oil, or moisture (excluding identification stickers, fixing tapes, crystal orientation markings, etc.) Weight check ... Matches the slip (within +3kg/-0% per package) Component analysis ... No detection of P (phosphorus) (N.D.) Analysis method: Randomly sample samples from each shipping lot and perform qualitative analysis using X-ray fluorescence. Quantitative analysis is performed on lots that detect P (phosphorus) spectrum during sampling inspection. Basically, it can be exported to the whole world except for some regions. This product is a semiconductor-level crystal, so it is a product for 100% remelting. When purchasing, you must agree to the pledge.
Copper Cathodes for sale: Origin: Congo (DRC) Loading Port: Dar es Salaam port, Congo. The commodity will be transported from Congo to Dar es Salaam by land and thereafter by sea to final destination. CIF Price: -22% LME. This is the best price we know from the seller (not negotiable). Valid up to August 2024. Cu Purity: 99.97% to 99.99% MOQ is 5,000 tonnes for 12, 24, 36 and 60 months. Trial qty: 2000 tonnes (on DLC MOQ) Max. monthly capacity: 70,000 tonnes Payment terms: 100% DLC Non-transferable Payment can be done at destination port. Performance bond : 2% No upfront payments POP may be issued as a transaction procedure and site visit will be allowed. Seller's strict procedure: (1) The buyer with the financial instrument issues an officially signed/stamped LOI or ICPO on letterhead agreeing with the terms and conditions stated herein such as price, issuance of POF for two months' delivery trenches (after SPA) and signing of NCNDA. (2) We will issue the NCNDA to be signed by intermediaries/mandates AND the buyer. The seller's details will not be mentioned in the NCNDA. The NCNDA will mention the commission structure, which is $25/tonne to be shared by the buyer's party including us(two intermediaries). Markup is NOT allowed. The NCNDA will be issued along with CIS for the buyer to fill out and sign. (3)The seller may conduct a Zoom or Google meeting with the buyer after due diligence on buyer's bank. (4) The seller will issue FCO or SPA depending on what was issued by the buyer initially. (5) The buyer signs SPA and issues POF MT199 bank to bank for two months' delivery trenches. (6) The seller may issue POP video and/or allow site visit. (7) The buyer issues DLC or SBLC Please note that no enquiries will be entertained without an official LOI/ICPO complying with the terms. Buyers should send LOI/ ICPO
Application The composite cyclic corrosion test chamber is capable of conducting traditional salt spray, dry-wet alternation mixed salt spray tests, as well as most automotive cyclic corrosion tests. It is specifically designed and assembled to meet the requirements of standards for controlling salt spray,relative humidity, air dryness,condensation humidity, automatic spraying, saltwater immersion, rotating spraying, and low temperature. Salt spray cabinet is used for testing paint-coated parts, metal components,electronic components,electrophoretic coated parts, and more. Feature 1.Structure of Salt Mist Test Chamber: with enclosure is a fully anti-corrosion structure, made of multi-layer fiberglass reinforced polyester resin, and constructed with corrosion-resistant materials.If you need more models about our test equipment. 2.Unique design: Large spraying area and high flow rate, resulting in shorter spraying time compared to fogging the solution under salt spray function. 3.Custom nozzle: Specific nozzles evenly spray the solution onto the test sample, and the solution flow rate can be adjusted. 4.The nozzle is installed on an independent module, making it easy to remove when fogging function is enabled. 5.Programmable touch screen controller allows for operation in both Chinese and English, and enables data collection. 6.Standard test specimen racks are provided, capable of accommodating flat samples. For oversized and heavy three-dimensional samples (such as automobile hubs and engine components), grid kits with the same height as the support can be used. The enclosure is structurally robust, allowing for even distribution of the load. 7.The spray on/off time can be programmed directly to better control the corrosion rate.
Application Environmental chamber manufacturers are� widely used to test the heat resistance, cold resistance, dry resistance, moisture resistance of various materials, JOEO environmental test chambers has a unique design and high-quality materials, whether you are testing aerospace products, electronic instruments, materials, food, medical, electronic and electrical products and various electronic components, JOEO environmental test chamber can give you the perfect solution. What your Most Care with needed ? Environmental test chambers� evaporator no frosting under longtime Low temperature and low humidity running.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Automatic control system refrigerant demand save electricity above 30% High heat load tested samples test environment Realize 95â?? 95%high temperature and high humidity environment.10% 20 â?? ultra-low temperature range control ability Multi-language selection: Chinese, English,Other Language support Customized� Russian, Korean, Japanese, German � multilingual language switching. Environmental test chambers temperature and humidity can reach -70C ~ 200C, 20% ~98%R.H.(10% ~98%R.H /5% ~98%R.H., special optional condition,need Dehumidifieror Dryer)
Groundnut Is Commonly Called Peanut And It Has Numerous Areas Of Application Of Utility. It Is Used Confectioneries, Peanut Butter, Oil Extraction And It Is Used In Forming Anti-ageing Drugs. It Is Also Used For Direct Consumption. Groundnut Is A Major Source Of Oil Which Is Mono Saturated Fat And Is Healthful Type Which Is Prescribed For Skin Health Benefits. We Are Specialized In Export Of Groundnut Bold, Java And Tj With Assorted Size. We Procure Groundnut In Shell Directly From Farmers And Mandies And Process It In Our Well-equipped Machinery. We Supply Groundnut Locally And Internationally As Per Buyer Requirement. Specification Groundnut Type : Bold/ Java/ Tj Bold Groundnut Counts Per Ounce : 30/35, 35/40, 38/42, 40/50, 50/60, 60/70, 70/80, 80/90, 90/100, 120/160. Java Groundnut Counts Per Ounce : 50/60, 60/70, 70/80, 80/90, 90/100. Tj Groundnut Counts Per Ounce ; 50/60, 60/70, 70/80, 80/90, 90/100. Moisture In Percentage : Max 7 % Admixture In Percenrage : Max 1 % Broken & Split : Max 1 % Damage & Imperfect : Max 1 % Foreign Material : Max 0.1% Min, 0.50% Max (as Per Costomer Requirement) Oil Content : 42% Min, 52% Max Moulds And Live Insects : Nil Aflatoxin : Aflatoxin Negative 5 Ppb (tlc Method) 10 Ppb (hplc/elisa Method With B1b2 Cotion) 20 Ppb (hplc/elisa Method With B1b2 Cotion) We Provide As Per Customer Requirement Packing : -new Jute Bag Of 20/25/50 Kgs Gross. -new Vacuum Pack Inside And Outer Layer With Pp Woven Bags Of 25 Kgs Gross -pp Woven Bags Of 50 Kgs Gross Container Load : 19 Mt / 1 X 20 Ft 28mt/ 1 X 40 Ft
Type :UV / LED GEL Of Soak Off Uv Gel Materials : UV Curable Polyurethane Resin Soak off : easily Color chart :more than 1000 colors,according to color chart Volume : 10/15ml/bottle Feature :Your brand color gel nail polish Products G.W : 0.055kg Certificate :MSDS\GMP MOQ : 50 pcs Soak off :Yes,soak off easily Tools : nail lamp,LED lamp Application : Nail Art Beauty, Nail Salon, Nail SPA or Training Free Samples We can provide free samples with product brochure,you just need to cover the shipping cost,welcome to test the quality of our products 15ml glass bottle,15 bottles/box CTN Capacity :300pcs/carton CTN Size (L*W*H) :45*28.5*38cm CTN G.W :19.8KG 1.UV/LED Nail Gel polish/ Varnish /Laquer can be offered without brand or do your brand. 2.UV/LED Nail Gel polish/ Varnish /Laquer can be offered in barrel as 1kg, 5kgs, 10kgs,20kgs 3.UV/LED Nail Gel polish/ Varnish /Laquer can be customized according your formula & color etc. 4.Comprehensive OEM , customized color design and buyer label & packing service offered. 5.We will provide you with free samples. 6.We can adjust the color for you as your requirement. 7.Offer Raw materials in bulk can be sold without brand. 8.Customized for you Private Label and bottles. 9.Enquiry will be replied within 24 hours, you could contact us freely 10.The freight shown on the page is general freight. Please contact us to find out how much freight is actually needed.
We are the professional nail sticker manufacturer for more than 8 years, with high quality and competitive price, warmly welcome from all over the world. We are leading manufacturer of Skin care and make up, mask pack, Ampule /Serum , Female Virgin Cleansing , Breast and Hip Enlargement Cream, Loose Weight Cream , Nail Sticker and Nail polish, Hair Care ( Shampoo, Conditioner, Body wash, Hair Hard Wax stick ) at Korea. We are exporting our goods a lot of countries to customer brand or our brand name . 1. We have some like Cellrato and Anjo and Other brand name . If you choose our goods, we are able to offer you very competitive price more than other supplier . Also We can guarantee you high quality and quick delivery . We hope to open good business relationship with you as soon. 1. Skin care ( Cream/ toner/Emulsion/ Essence/ Ampule/ breast and hip enlargement cream/ Loose weight cream ) 2. Make up ( Lip stick/ Lip Tint/ Lip Balm/ Lip Gloss / Foundation cushion cover/ Eye Liner/ Eye Brow / Mascara / Eye Pencil 3. Nail Polish 4. Nail Sticker 5. Female Virgin Cleansing 6. Mask Pack All kind Cosmetic can provide if you want to OEM and ODM .
We are leading manufacturer of Skin care and make up, mask pack, Ampule /Serum , Female Virgin Cleansing , Breast and Hip Enlargement Cream, Loose Weight Cream , Nail Sticker and Nail polish, Hair Care ( Shampoo, Conditioner, Body wash, Hair Hard Wax stick ) at Korea. We are exporting our goods a lot of countries to customer brand or our brand name . 1. We have some like Cellrato and Anjo and Other brand name . If you choose our goods, we are able to offer you very competitive price more than other supplier . Also We can guarantee you high quality and quick delivery . We hope to open good business relationship with you as soon. 1. Skin care ( Cream/ toner/Emulsion/ Essence/ Ampule/ breast and hip enlargement cream/ Loose weight cream ) 2. Make up ( Lip stick/ Lip Tint/ Lip Balm/ Lip Gloss / Foundation cushion cover/ Eye Liner/ Eye Brow / Mascara / Eye Pencil 3. Nail Polish 4. Nail Sticker 5. Female Virgin Cleansing 6. Mask Pack All kind Cosmetic can provide if you want to OEM and ODM . Wrinkle improvement. Atopic itch soothing effect. Acne treatment effect. Anti-aging effect. Moisturizing. elasticity. Anti-inflammatory and antibacterial effect. Contains 77% of noni fruit extract. Contains 40% vegetable collagen. Contains 35% Idebenone. Atopic dermatitis, skin disease improvement, skin aging prevention, wrinkle improvement, and excellent moisturizing and elasticity ampule developed by a famous Korean dermatologist through clinical trials.
Chick peas Chickpea (locally named 'kabkabi') is one of the Sudan's most important winter cereal crops of high nutritional value, and is available at reasonable market prices. Therefore, it is being favored as popular food by various Sudanese communities. Chickpeas, also known as garbanzo beans, are part of the legume family Including chickpeas in your diet regularly will support your health and may reduce your risk of developing chronic diseases, such as heart disease and cancer. Theyâ??re affordable and easy to find at most grocery stores. You can include them in various dishes, and they make an excellent meat alternative in vegetarian and vegan meals. Furthermore, chickpeas are delicious and certainly worth including in your diet if you want to reap their health benefits. Benefits and usage of chick peas 1-Packed With Nutrient Chickpeas have an impressive nutrition profile. Chickpeas also provide a variety of vitamins and minerals, as well as a decent amount of fiber and protein. A 1-ounce (28-gram) serving provides the following nutrients ( 2-Help Keep Your Appetite Under Control 3. Rich in Plant-Based Prote 4. May Help You Manage Your Weight 5. Support Blood Sugar Control 6. May Benefit Digestion 7. May Protect Against Certain Chronic Diseases . Heart Disease Cancer . Diabetes . 8. Inexpensive and Easy to Add to Your Diet
Description: Wine insulated tank is suitable for mucus elimination, stabilization and other oenological processes, which require a tank with thermo-isolative characteristics. Dimple jacket is for controlling the temperature perfectly. The entire inside tank surface is covered with the insulation material which is polyurethane foam. The standard insulation thickness is 80mm. Features: Fully polyurethane foam Insulation reduce heat emission and energy loss. Stainless steel cladding and 70-100mm PU foam have better effect than insulation coatings. Stainless steel welded cladding provides better protection and fine appearance. Dimension: Capacity: kl V Shell dimension: mm D Total height: mm H Legs N Cooling area m2 BM1 920*1500 2180 3 1.4 BM2 1270*1610 2600 3 2.2 BM3 1500*1830 3000 4 3 BM4 1600*2000 3250 4 4 BM5 1600*2440 3650 4 5 BM6 1800*2440 3500 4 5.5 BM8 1820*3050 4650 4 7 BM10 1900*3600 4650 4 8.5 BM12 1900*4270 5750 4 10 BM15 2000*4880 5950 4 12 BM20 2300*4880 6100 4 14 BM25 2600*4880 6050 4 15 Optional: 2mm thick welded cladding or 0.7mm riveted cladding Side agitator Wide/short type or slim type Full insulation or part insulation Prettech Wine Insulated Tank is a great alternative for energy saving and better temperature control. The polyurethane foam has better insulation efficiency than polystyrene. The full welded stainless steel cladding is very durable. It also can be used as cold stabilization tank after the fermentation process. Hot Tags: wine insulated tank; wine tank with isolation; isolation wine tank; wine tank; wine storage tank; wine fermentation tank