Tape Width >100 mm Tape Length >50 m Color Silver Use Bag Sealing Adhesive Acrylic Material Aluminium Foil Aluminum Foil Tapes are coated with acrylic or rubber adhesive and available with or without release paper. This foil tapes are available with 25 mic-100 mic thickness. Features: Shiny silver, U.V. resistance Flame, moisture and many chemical barrier Good for harsh Long term outdoor application It has hot & cold insulation property Usage: Widely used in tubes and lead jointing for air conditioner, refrigerator and water heaters. For wrapping on pipes, engines and wires as a heat & water resistance. Used as a static ground application.
Tape Length 10-20 m Thickness 0.11-0.2mm Adhesive Rubber Cable harness also known as a wire harness, cable assembly, wiring assembly or wiring loom, is an assembly of cables or wires which transmit signals or electrical power. Features: It has electrical insulation property. Flame retardant(FR) and ROHS grade PVC Tapes are specially used for Harnessing application. Usage: Commonly used in automobiles, Electronics appliances (white goods manufactures), aircraft industries. Normal PVC Tapes are used for electrical Insulation of all cables
Tape Length 30-40 m Feature Water Proof Material Tissue Double Sided Tissue Tapes is made from non woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive and laminated with release paper Features: Excellent tack and good strength for immediate bonding Good resistance to solvent Heat and chemical Usage: Foam and felt lamination in automobile and appliances manufacturing, Splicing of films/paper/ oils, lamination and fastening in paper/plastic and printing industries, adhere posters & envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal/polycarbonate stickers etc.
Usage/Application Mounting Type Double Sided Usage Packaging Adhesive Rubber Material Cloth Use Masking We made this Double Sided Tapes Paper, Plastic Film and Foam carrier which is coated with Acrylic/Rubber/Silicon adhesive coating depends upon the surface to be bonded, application period and temperature resistance required. Application: Foam and Felt lamination, Splicing of paper/film and metal coils. Mounting of metal/paper/plastic/glass/mirror in automobile industries, appliance manufacturing, aerospace industries, construction (metal facade, curtain wall, Glazing & cladding). Metal coils manufacturing, paper industries, Printing Industries, leather-cloth industries and signage industries.
Usage/Application Masking Material Crepe Paper Color White Tape Width Customized Tape Length Customized Size Customized, 3 inch Usage Packaging Adhesive Side Single Sided Paper Masking Tapes comes with different grades like Paint grade, Furniture grade, automobile paint grade and High-temperature resistance grad Application: Widely used for color separation and painting made by hand or by spray, Furniture making, automobile and aircraft painting, in appliance manufacturing, decorative glass making, powder coating, plating and sandblasting
Product Details: Usage/Application Retail Rolls,ATM Rolls,Bus Ticketing,Credit Card Rolls. Material Direct Thermal Paper GSM Less than 80 GSM Color White Packaging Type In roll form Pattern Plain Size 57mm x 15Mtr Is It Customized Customized Is It Waterproof Non Waterproof Pre-Printing On Paper No Coated Yes Thermal paper rolls are manufactured using quality-approved Raw Material, Chemicals And Dyes. Thermal Paper rolls are widely used in the following Retail/Shopping Mall Rolls, ATM Rolls. Point Of Sale, Bus Ticketing, Credit Card Rolls. Railway Ticket Rolls Multiplex Theater Ticket Rolls
Lubricants for engines.
Centrifugal fans, id fd sa fans, tube axial fans, main cooler, dust collector, spray paint booth powder, coating booth, multi cyclone heat exchanger, oven fan.Engineers mfrs fabricators and suppliers
Lentils & Pulses, Oil Seeds, Dairy Equipment's and Engineering Equipment's..Engineering Services.
Product Details: Type- Aluminium Welded Usage/Application- Window Grills Hole Shape- Square Color- Silver Thickness-
Product Details: Packaging Type-Roll Material- Aluminium Size - 30 mm Colour Contains- Black Feature- High Quality, Durability, Robustness etc.
PI20·series incremental circular grating High precision non-contact grating Primary advantages - P120 series gratings are integrated stainless steel circular gratings, with 20m incremental grating lines engraved on the cylindrical surface, and optical reference marks, available in a variety of sizes. - The non-contact form eliminates backlash, torsional errors (twist), and other mechanical hysteresis errors inherent in traditional enclosed encoders. - The rings are mounted with excellent accuracy and have a tapered mounting system that reduces the need for highly toleranced machined parts and eliminates eccentricity. - Compatible with RX2 readhead
Stainless steel welded mesh in all the grades such as 302, 304, 314. The best in quality mesh with plastic packaging. Available in rolls and sheets.
Stainless steel fence wire is strong and durable. By its very nature, stainless steel fence wire does not require additional surface treatments such as galvanizing or PVC to protect it. The wire itself is extremely resistant to rust, corrosion, and harsh chemicals. If you need to use welded mesh or fencing in areas that will be exposed to corrosive substances for long periods of time, stainless steel products will meet your needs. Type 316 is recommended for salt water environments because it has higher corrosion resistance than Type 304. Features and Benefits: Ultra-long service life, which is longer than that of galvanized products before welding Extremely strong, durable and resistant to rust, corrosion and harsh chemicals Lowest long-term cost of ownership in harsh conditions (higher initial cost is offset by lower repair and replacement frequency) Ideal for hard-to-access areas for rust and corrosion Application Like almost all wire mesh and wire cloth, stainless steel welded wire mesh is suitable for construction, agriculture, commercial and industrial applications. Here are some popular uses for T 304 SS and T 316 SS welded wire mesh:
A manufacturer and specialize in producing on marine wire mesh in . Also named crab trap wire, wire crab net, marine trap wire etc. There are square welded wire mesh and hexagonal wire netting used for crab, fish, lobster etc.capture and aquaculture. The welding spot solid, mesh opening uniform, mesh surface is flat, and the PVC has strong adhesion, it's very high quality to be used for fishery industry.
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 â?? 1.05% Si : 0.13 â?? 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After clientâ??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyerâ??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to sellerâ??s nominated bank account within 48 hours after receipt of the final assay report from buyerâ??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation