Rail Clamp The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters Specification Model LJ-JJQ-C Type Rail Clamps Material Stainless Steel Dimensions (L x W x H) 335mm*175mm*42mm Application Rail Type 43,50,60kg
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Railway Crow Bar It is for situations such as these that the jim-crow comes into its own. The jim crow was slotted over the rail about four or five sleepers away from the offending joint.and the screw tightened until it engaged with the edge of the rail. Then tightened the screw a further half-turn - thus bending the rail slightly.This process was repeated, moving the jim crow one sleeper nearer the joint each time and each time adding one more half-turn. This introduces a gradually increasing curve to the rail as it nears the joint.If you compare these two pictures with those showing the kinks above, you can see the difference. The amount of bend can be tailored to suit each location - and if it turns out that have made the curve too severe, the jim crow can be slotted on the opposite way round and tightened up to ease the curve. Specification Type Crowbar Railway Material Steel Dimensions (L x W x H) 1500mm, 1800mm Place of Origin China Hubei Brand Name Linkage Item railway crowbar Brand Name Linkage Application Wrecking & Demolition, DiggingChiseling Tip Type Chisel End, Rolled Nail Puller for High Leverage, Heeled Pinch End Length 1500mm, 1800mm Weight 6 KG
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track Specification Model YBD-245A Type Hydraulic Railway Track Material Stainless Steel Rated lifing force/ Rated lining force(kN) 245/145 Maximm lifting Quantity/ lining quantity(mm) 135/95 Weight(kg) 23
Place of Origin Hubei, China Type Rail switch grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Brand Name Linkage Product name Rail switch grinding machine for track maintenance function Rail switch point grinding Engine Honda GX270 Petrol engine Grinding wheel speed: â?¥3600r/min Feed adjustment accuracy: â?¤l0mm Weight â?¤117kg Rated power: 5.1kW Grinding wheel feeding stroke: â?¥80mm Grinding wheel rotation angle: â?¥30�° NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Place of Origin Hubei, China Type rail profile grinding machine Material Stainless Steel Dimensions (L x W x H) (mm) 1410*500*850mm Brand Name Linkage Product name rail profile grinding machine Profile wheel span: 1000mm Engine 2 stroke petrol engine M165 Grinding stone speed: â?¥3900r/min Grinding stone feeding stroke: 42mm Fuel tank volume: 4.5L Feed adjustment accuracy: 0.125mm Power: 6.0kW Grinding stone inclination: 0~90�° Grinding stone specification: 150*55*70mm NGM-6.0 Internal Combustion Rail Profile Grinding Machine This Rail Profile Grinding Machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90�°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS â?? Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled â?? Equipped with spark protection device â?? Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone â?? Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications �?125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone �±90�° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 1900*1200*2500mm Brand Name Linkage Product name automatic rail tamping machine Usage automatic rail tamping machine Application automatic Hydraulic rail tamping machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Other name track ballast tamping machine YD-22III Smart rail tamping machine unit is a renewal product developed by our factory with new material and new technology. It has collected the tamping experience of users at home and abroad. It can do tamping works not only on the ballasted track of concrete sleeper type II and III in China, but also on various kinds of concrete sleepers and steel sleepers in foreign countries.This machine is suitable for tamping operation of different types of rails and concrete sleeper line after large and medium repair and sieving operations, and also suitable for tamping operation of ballast on newly built track bed. The equipment has superior performance, reasonable structure, safety and reliability, and high working efficiency. It fully meets the needs of railway ballast tamping operation
NQGâ??5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Place of Origin Hubei, China Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Brand Name Linkage Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticalityâ?¤0. 4mm, flatnessâ?¤0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Place of Origin Hubei, China Type Sleeper Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 420*500*1070mm Brand Name Linkage ENGINE 2 stroke petrol engine 1.42kW Max. drill diameter 20mm Drill speed â?¥350r/min Drill speed2 â?¤20s Weight 14kg NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
Office LED Lighting Luminaire with multi modules design easy for DIY This Office LED Lighting Luminaire is easy for installation, direct plug-in power supply method is easy to wiring, and this LED Linear Lighting Batten Fixture adopts stainless steel base and high-grade PC diffuser, so that the waterproof rating of this LED Lighting Luminaire can achieve IP65. This Office LED Lighting Luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this LED Linear Lighting Fixture can achieve 125lm/w. Multi function modules can be replaced, itâ??s more convenient for using multi function through one linear LED Linear Lighting Batten Fixture. Lamp Luminous Efficiency(lm/w):125 Warranty(Year): 5-Year Type :Office LED Batten Light Application:Corridor, Office Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Model Number:ZL-MBLP36-4FT-DN Color Temperature(CCT) :6500K Input Voltage(V):200-240V AC Color Rendering Index(Ra):83 Support Dimmer:Yes Lifespan (hours):54000 Working Time (hours):54000 Product Weight kg :3.1
silicon carbide radiant tube Product performance of silicon carbide radiant tube Silicon carbide radiant tube this product has the characteristics of good thermal conductivity, high temperature resistance, corrosion resistance, oxidation resistance and long service life. Application of silicon carbide radiant tube Silicon carbide radiant tubes are widely used in gas and oil industrial kilns such as tunnel kilns, shuttle kilns and roller kilns, as well as industrial coke ovens in iron and steel metallurgy and other industries. 1. The inner tube of the flame is made of silicon carbide, and SiSIC can withstand high thermal stress; 2. Multiple sections of inner tubes can be combined into inner tubes of required length according to the length of radiant tubes; 3. The SiSIC flame inner tube allows the metal radiation tube to bend without damaging the flame inner tube and radiation tube; 4. Compared with the metal tube, the load of SiSIC in the radiation tube can be reduced; 5. Compared with metal inner tube, SiSIC flame inner tube has higher thermal conductivity. Specification of silicon carbide radiant tube The specific specifications of silicon carbide radiant tube can be made according to the needs of users
Waterproof Batten Fixture with Small Separate Fixed Plate emergency waterproof linear batten luminaires This emergency waterproof batten fixtures designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser. The intensity of this waterproof batten fixture is more high, and the protection rating is IP20. This emergency LED linear batten luminaires incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares. The huge terminal block of this emergency waterproof batten luminaires is easy for wiring. The safety hooks design of this Waterproof LED batten fixtures is easy for installation. Lamp Luminous Efficiency(lm/w):110 IP Rating:IP20 Warranty(Year):3-Year Place of Origin:Guangdong, China Color Temperature(CCT):6500K Color Rendering Index(Ra):80 Support Dimmer:Yes Lifespan (hours):70000 Working Time (hours):70000 Product Weight(kg):2.3 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JSBLP18-2FT-CES Brand Name:comled Input Voltage(V):AC 100V or 220V( �± 10%) Working Lifetime(Hour):70000 Length:2ft Application:Warehouse Material:Iron+PC
NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits. Specification Modelï¼?NZMZ-20 Typeï¼?Sleeper Drilling Machine Materialï¼?Stainless Steel Dimensions (L x W x H)ï¼?420*500*1070mm ENGINEï¼?2 stroke petrol engine, 1.42kW Max. drill diameterï¼?20mm Drill speedï¼?â?¥350r/min Drill speedï¼?â?¤20s Weightï¼?14kg
RB1530 Portable CNC flame cutting machine is a kind of cutting equipment with high efficiency and energy saving. It is a kind of numerical control cutting machine with light weight and economic price. It is suitable for cutting steel plates of various thicknesses and can be equipped with plasma cutting. Portable CNC flame cutting machine features 1. Economical and Practical, especially for small and medium-sized enterprises; 2. Small volume, light weight, easy to move, no occupying fixed site; 3. Preset graphics database, can store over 1000 cutting program files; 4. Motors, drives,electromagnetic valve, and other important components, all use well-known brands at home and abroad; 5. Reserve plasma cutting function interface, support for plasma cutting; 6. Smart design, can be moved everywhere you need. Portable CNC flame cutting machine parameters: Model RB-1530 Working Voltage AC 220V , 50HZ Working Size 1500mm*3000mm Length of Crossbar 1800 mm Length of Longitudinal Guide 3500 mm Max Cutting Speed 10000mm/min Cutting Thickness 0-200mm Precision ±0.01mm File output mode USB interface Weight 200 KGS
The HMLH678 feed pellet maker is one of the indispensable pieces of equipment in the feed mill plant. It can be used alone or in the feed pellet production line. The feed pellet maker machine can make various animal feeds: Poultry feed, such as chicken feed, duck feed, goose feed, and bird feed; livestock feed, such as horse feed, pig feed Feed, and rabbit feed; ruminant feed, such as cattle feed, sheep feed, camel feed, etc. Herm machinery big capacity good price HMLH678 feed pellet maker is high precision gear drive ring die feed pellet machine, this machine has stainless steel conditioner, with frequency speed control, use â??SKFâ?? high-quality bearing, ensure high-efficiency, stable and low noise drive, can work alone with its electric cabinet. It can be used in all kinds of large and middle farms to make feed pellets to feed animals, for raw materials, it can be grain, such as wheat, corn, maize, etc., and some grass, and straw also can be applied to this machine, has a very broad application.
This sliding design led linear luminaire is easy for installation, and this led linear luminaire adopts stainless steel base, so that the intensity of this led linear luminaire can achieve IK10. This led linear luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this led linear luminaire can achieve 125lm/w. The safety hooks design of this led linear luminaire is more convenient and safe for installation. The clip-fixed backup battery design of this linear lighting fixture makes the maintenance and replacement more easier. And the emergencny function enable the linear lighting fixture to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-NSBLP20-2FT-CS-3CCT Color Temperature(CCT): 3000/4000/6000K Input Voltage(V): AC 220V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: Yes Lifespan (hours): 50000 Working Time (hours): 50000 Length: 2ft CCT: 3000/4000/6000K Beam angle: 120 Degree
IK10 sliding designed iron bracket led battens suitable for stair well This sliding designed LED Batten Light is easy for installation, and this batten fixtures adopts stainless steel base, so that the intensity of this led batten fixture� can achieve IK10. This� batten fixtures has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this batten light can achieve 125lm/w. The safety hooks design of this led battens is more convenient and safe for installation. The clip-fixed backup battery design of this led batten lights makes the maintenance and replacement more easier. And the emergencny function enable the led batten fixtures to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service:� Lighting and circuitry design, DIALux evo layout, Agi32 layout Color Temperature(CCT): 3000/4000/6000K Input Voltage(V): AC 220V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: Yes Lifespan (hours): 70000 Working Time (hours): 70000 Length: 2ft CCT: 3000/4000/6000K Beam angle: 120 Degree
Linear Lighting LED Batten Fixture with easy installation design This LED Batten Fixtures designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser. The intensity of this LED Batten Fixtures is more high, and the protection rating is IP20. This Linear Lighting LED Batten incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares. The huge terminal block of this Linear Lighting LED Batten is easy for wiring. The safety hooks design of this Linear Lighting LED Batten is easy for installation. Lamp Luminous Efficiency(lm/w):135 IP Rating:IP20 Warranty(Year):5-Year Place of Origin:Guangdong, China Color Temperature(CCT):5500K Color Rendering Index(Ra):83 Support Dimmer:NO Lifespan (hours):50000 Working Time (hours):50000 Product Weight(kg):3.16 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JSBLP36-4FT-CN Brand Name:comled Input Voltage(V):AC 100V or 220V( �± 10%) Working Lifetime(Hour):55000 Length:4ft Application:Warehouse, Corridor, Garage, School Material:Iron+PC
