Description DEEP POUR 2 PART RESIN CRYSIN5.0 is a crystal clear two-part epoxy resin system which can be poured at 5cm once. Low oder and zero VOCs makes CRYSIN5.0 an ideal resin for large projects, makin jewelries, or epoxy incorpotated furniture. Mixing Ratio for Crysin 5.0 is 3 (Resin) : 1 (Hardner) At room temperature 25 C (77 F) : 24~48 Hours Curing time may vary depending on the room temperature and humidity. 6 16 Hours after first coating (Dry to touch) 5cm Key Features 1. Crystal clarity 2. Self-defoaming 3. Shore D Hardness of 80 or above 4. Deep casting between 25-50mm per pour 5. Naver top-selling products Cautions 1. Do not drink 2. Do not add the liquid into a spray bottle 3. Keep out of reach of children and infants 4. Do not throw the container 5. Do not leave the product on skin for long duration. Rinse skin with warm running water and soap 6. Wearing protective gloves, protective clothing, eye protection is recommended 7. Store the product in a well-ventilated area away from heat/sparks/open flames/hot surfaces 8. In case of fire, use alcohol-resistant foam, dry powder, or sand The price on this site is based on the smallest size of Crysin 5.0 which is 400g and MOQ of 1000 sets. For quotes on larger sizes please enquire.
Radial Tire Special Material YB-5 Introduction: 1. JERINA YB-5 is a special material for radial tires, and a high-efficiency toughening modified agent that synthesized from various auxiliaries. It has plasticization, lubrication, cross-linking, coupling and other functions. 2. JERINA YB-5 also has high-activity inorganic filler as carrier, and the high-activity inorganic filler will dilute the toughening modified agent to form a thin layer of active material on the surface, which is more easily to crosslink with rubber, and significantly improve the reinforcing performance. 3. JERINA�® YB-5 mainly applicable to Tire, conveyer belt, rubber hose etc. Technical Specification: Appearance: White powder (visual inspection) Heating loss (105degX2h), % max.: 0.5 (HG/T2567) Specific gravity, g/cm3: 2.2-2.7 (HG/T3185) pH Value: 8.0-11.0 (HG/T2567) Application: 1. Add 3-8 phr JERINA YB-5 for tire production. 2. YB-5 can be added directly to your original formulation, or you also can make some small adjustment. Optimized vulcanization rate complies with test data and results. 3. Above are suggestions that you can adjust for optimal performance. Packing and Storage: 1. It is packed in Kraft paper bags lined with plastic film, net weight is 25kg/bag. 2. It should be stored in a cool, dry warehouse. 3. The shelf life is 24 months.
Overview Essential details CNC Machining or Not: Cnc Machining Type: Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM, Rapid Prototyping Material Capabilities: Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless Steel, Steel Alloys Micro Machining or Not: Micro Machining Place of Origin: Guangdong, China Brand Name: Lingyue Packaging & delivery Lead time: Quantity(pieces) 1 - 2 3 - 2000 2001 - 5000 >5000 Lead time (days) 7 15 30 To be negotiated Product Description Quotation According to your drawing(size, material, thickness, processing content, and required technology, etc) Material Carbon steel, SPCC, SGCC, Stainless steel, Aluminum, Brass, Copper, etc. Processing Laser Cutting, Precision Stamping, Bending, CNC Punching, Threading, Riveting, Drilling, Welding etc Surface Treatment Brushing, Polishing, Anodizing, Powder Coating, Plating, Silkscreen printing, Sandblast, etc Tolerance +/-0.2mm, 100% QC quality inspection before delivery, can provide quality inspection form Testing equipment CMM;Tool microscope;multi-joint arm;Automatic height gauge;Manual height gauge;Dial gauge;Marble platform;Roughness measurement Processing CNC turning, CNC milling, CNC machining, Grinding, EDM wire cutting File Formats Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF etc. Logo Silk print, Laser marking. Size Accept custom size. Color White, black,silver, red, grey, Pantone and RAL, etc Certificate SO 9001,ISO13485,JATF 16949 Packing By carton or as your request
Propylene Glycol Esters of Fatty Acid PGMS Characters: White powder or flake solid, insoluble in water, soluble in organic solvents such as ethanol, is a non-ionic emulsifier. Applications: Has excellent foam performance, good oil-soluble emulsifier. Used in pastry margarine, prevent the bread and confect aging, improve its processing performance. Uesd in ice cream, increase dilatability and shape preserving. Used in margarine to improve whipping, and to prevent the oil-water separate. Used for cakes, fried snack foods, complex sauce. Operation method and dosage: The max dosage for fat,oil and emulsified fat products is 10.0g/Kg, The max dosage for milk,dairy products and frozen drink is 5.0g/Kg, The max dosage for cake and fried foods is 2.0g/Kg, Technical index Acid value(Calculated by KOH)/ (mg/g) 4.0 Iodine value(g/100g) 3.0 Free Propylene glycol w/% 1.5 Hydroxide value(Calculated by KOH) / (mg/g)65 Saponification value(Calculated by KOH) / (mg/g)150-190 Soap(Calculated by Potassium stearate) w/% 7.0 Total mono ester content w/% 40 Ignition residue w/% 0.5 Pb / (mg/kg) 2 Packaging: Aluminized bag vacuum packing with nitrogen inside. Net weight: 20kg/carton(5kg/bag*4) Storage and transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and trasporting with materials that is explorsive, combustible or deleterious. The shelf life is 12 months.
Diacetyl Tartaric Acid Esters of Mono and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60 C to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) 2.0 Ignition residue (W/%) 0.5 Pb/(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Brand new and high quality Lightweight and convenient to carry(portable) The body of bottle is thicked. 100% guaranteed to make thick and dense foam for all pressure washers. It makes soft fluffy snow foam, fun and simply It works with any pressure washers, small and big are all working perfectly Specifications: Capacity of bottle: 400ML Suitable: Two Kinds: Craftsman/Briggs stratton pressure washer Karcher K1 K2 K3 K4 K5 K6 K7. (When you place an order, you should look carefully at which type to buy) Pressure Range: 100 bar-200bar (1450psi-3000bar) Construction Material: Solid Brass, Resistant Nylon, & PA bottle Stainless Steel mesh filter Maximum Water Temperature: 60 C Max Pressure of sprayer nozzle: 15MPA Chemical Resistant: Yes Spray Width Adjustable: Yes Useage: · Put the shampoo or wash powder into the bottle. Fill the water into bottle,make sure the proportion of shampoo and water is correct You'd better use warm water(not hot) to help make more foam.Cold water can be used (the effect ofwarm water is better) Shake the foam lance to make the shampoo Dissolve and more foam. Connect the bottle to foam lance unit. Connect the foam lance to car washer gun and then you can use it Timely Delivery: Our store promise the products will be shipped out within 5 days. Usually it will be sent out the next day after your payment. Our store Car Washing Tools Store(our store) promise the products will be delivered within 60 days. Usually it will be delivered in 2-4 weeks.
For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%
Parallel DrillsProducts Description: Application domain:for implantologyMaterial:Ultra high rust-proof and high wear-resistant stainless steel, ceramicLZQ is an OEM factory that produces a variety of dental implant drills, for example, Lance Drill, Side Cutting Drill, Screwdriver, Drill Key, Drill Extension, etc. We can also produce the complete surgical kits for customers.Chip collector, Bone deposition drill and reamer series commonly used for skeletal fragment collection and bone powder accumulation to the crest as reference; Regular stock material: Ultra-high anti-rust & high wear-resistant stainless steel (AA)(HRC54±2Section)Deep groove to top, chip accumulation to the crest. (It can be with black, yellow, full matt, full shiny, partial matt + partial shiny and other surface treatment)? 2-flute commonly-used specification: Any size series of edge diameter between 0.80mm 5.50mm 3-flute commonly-used specification: Any size series of edge diameter between 0.80mm 7.95mm  4-flute commonly-used specification: Any size series of edge diameter between 2.0mm 7.95m The series with regular number of flutes, but cutting length up to 55mm and total length up to 65mm, processed with any step, taper angle, shape, sharpness requirements. The conventional 10~12helical edge can be sharp, burnishing, passivated, or front-sharp but rear-blunt.
Weight : 99.6g (830mg x 120cap) Packaged in easy-to-carry capsule packs, this dietary supplement is made of six-year-old Korean red ginseng extract powder suspended in a gel and encapsulated, allowing Red Ginseng Extract Pills to be carried easily and taken in the most convenient way. Red Ginseng Extract Capsules retain the rich active components of Korean red ginseng at an optimal level, without requiring any preparation. Ingredients : 21% of red ginseng concentrate (Domestic 6 years old - more than 60% of solid, ginsenosides Rg1, Rb1 and Rg3 total 3mg /g), soybean oil (foreign), refined shar (palm oil, malaysia), beeswax, grape seed oil, Ingredients: Synthetic coloring agent (Titanium Dioxide - Food color 4, Food coloring red 3, Food coloring red 40, Food coloring blue 1) * Ingredients: Percentage: red ginseng root 70%, red ginseng hair 30% Nutrition information : Calories 40 Kcal, less than 1 g of carbohydrate, 0 g of sugar, 0 g of protein, 4 g of fat, 0 mg of sodium 0mg Effects : Improve blood circulation through immunity enhancement, fatigue improvement, inhibition of platelet aggregation, can help antioxidant. Method of intake : 3 times a day (2 capsules once) This product is not medicine that intended for the prevention and treatment of diseases. Notice Avoid exposure to direct sunlight, keep in a cool, dry place. If pregnant, nursing, or on medication, consult your physician prior to using this product. Check each ingredient carefully for allergies and interactions. Keep out of the reach of children.
Inner Mongoli s Ejin Horo Banner Sept Coal Review Production In September 2020, a total of 14.98mn t of raw coal was produced in Ejin Horo Banner in Inner Mongolia, falling 1.45mn t or 9% from preceding year. Shendong Coal produced 5.96mn t of raw coal, up 580,000t or 11% from 2019. Local coal mines produced 9.02mn t of raw coal, down 2.02mn tor 18% on the year. Sales In September, Ejin Horo Banner sold 14.74mn t of coal in total, falling 1.25mn t or 8%. Shendong Coal sold 5.96mn t, up 580,000 t or 11% from last year. Local coal mines sold 8.79mn t, down 1.83mn t or 17% from prior year. Price By the end of September, coal price in Ejin Horo Banner averaged 322 yuan/t, falling 16 yuan/t or 4.7% on the year. Price of lump coal was 368 yuan/t, down 5 yuan/t yet up 1.3% year on year; that of raw coal declined by 44 yuan/t or 14% to 273 yuan/t from last year; that of powdered coal increased by 13 yuan/t or 4% to 336 yuan/t from 2019. Subscribe SteelHome website to find more China Iron/Steel market information you're interested in.
Dongguan Feito Hardware Co. Ltd is a professional manufacturing enterprise, which is engaged in the design and development of metal parts and production of precision metal parts. Our production range includes CNC processing center, automatic lathing, automatic milling, wire cutting, powder metallurgy processing and assembly of metal parts with plastic parts. Our products are mainly customized, and we produce according to customer's incoming drawing, which includes precision metal parts, jig and fixtures. Our products are widely used in optical communications, sensors, SMT, electronics, household appliances, medical devices, automobile and other industries.- Benefit from our advantages We commonly process materials like copper, brass, phosphor bronze, beryllium copper, aluminum, iron and other metal materials. Also, our common surface treatments are tin plating, nickel plating, silver plating, gold plating, chrome plating and more. Main products Precision CNC parts , non-standard fasteners, customized sheet metal products, all kind of hardware products Material steel, stainless steel, brass, copper, aluminum, POM, nylon, PTFE Finish Polishing, anodize, nickel, zinc, tin, chrome Advantage best service, original factory, engineer support Machining equipment Automatic lathes, CNC lathes, cutting machines, welding machines, bending machines, printing lines Quality standard ISO 9001:2008; 100% check one by one Inspection equipment CMM, projection, calipers, micro caliper, thread micro caliper, pin, caliper, pass meter Lead time Sample 7-15 days, mass production 30-60 days. Packing According to customer's requirement Delivery Delivery goods by sea or by air, according to customer's requirement
Chain Pulley Block 10000 kg.Chain Pulley Block 5000 kg. Chain Pulley Block Model HS-C 1/2 HS-C1 HS-C1 1/2 HS-C2 HS-C3 HS-C5 HS-C10 Capacitv Ton 0.5 1 1.5 2 3 5 10 Standard Lift m 3 3 3 3 3 3 3 Runnina test load Ton 0.75 1.5 2.25 3 4.5 7.5 3 Headroom (drawn closeup) mm 270 335 410 440 480 600 720 Effort required to lift max load N 160 314 363 324 333 412 412 No. of colums of load chain 1 1 1 2 2 2 4 Load chain dia. mm 5 6 8 6 8 10 10 A 110 142 178 142 178 210 367 Dimensions mm B 114 126 142 126 142 167 167 C 21.5 27 30 30 37 46 54 D 110 142 178 142 178 210 252 Net Weight kg 7 11 17 15 24 39 72 Gross weight kg 10 14 21 18 28 48 87 Inside Parts Light weight and sturdy Ease of handling Lifelong lubrication Minimal maintenance required Surface hardened gears Extended working life Use of needle roller bearings High operating efficiency Smooth passage of load chain Machine guide rollers Smooth hand chain operation Unique cover design Self sustaining maintenance free friction brake Reduce downtime Imported grade 80 load chain for strength and wear resistance Longer chain life Anti-corrosive powder coated finish Better aesthetics
These unique red Kampot peppercorns produce a moderate heat that gradually builds in the mouth. Intense, flavorful and complex, these peppercorns pair beautifully with pasta, poultry, produce and pastries Harvested when the fruit is fully mature and has taken a red colour on the vine. The peppercorns are sun-dried for a few days and acquire a black colour with a deep maroon taint. This pungent pepper is very rare. Pepper is best purchased as whole peppercorns, as freshly ground pepper is vastly superior to the ready ground powder. Whole peppercorns retain their flavour indefinitely but quickly lose their aroma and heat after grinding. Peppercorns can be easily ground in a pepper mill or pestle and mortar, and is best ground directly onto food. With hot food it is best to add pepper well towards the end of the cooking process, to preserve its aroma. Peppercorns are seasonal with harvesting taking place from February to May. Drying process: - Large and uniform seeds selection - Choose fresh seeds without pests - Natural sun dried - Standard moisture 10-12% - No impurities - No additives + No So2 + No Co2 + No GMO Packing: PA 100gram per bag and PE / PP bag 25KG-50KG / bag. Specification: export standard - Style: Dried - Certification: ECOCERT ORGANIC STANDARD - Quantity capacity : 2TONS per year - Origin : KAMPOT CAMBODIA - Product Type: Spices - Processing Type: Raw - Shape: Round - Color: Red, natural white - Shelf Life: 3 years
Product Description Productï¼?2- acrylamido-2- methylpropanesulfonic acid (AMPS) Chemical Formula: C7H13NO4S CASï¼?15214-89-8 Appearance: white crystalline powder Application: widely used in oilfield chemistry, water treatment, synthetic fibers, plastics, printing and dyeing, papermaking, water paint, biomedicine, magnetic materials and cosmetics etc.. Water treatment: Not only homopolymer of AMPS monomer but also AMPS copolymer with acrylamide, acrylic acid and other monomers can be used as sludge dehydrating agent in sewage purification process.They are used as sealing agents for iron, zinc, aluminum, copper, and alloys in closed water circulation systems.They can also be used as detergent and scale inhibitor for heater, cooling tower, air purifier and gas purifier descaling agent, scale inhibitor. Packaging: fibre drum packing with winding film (moisture proof), 150 kg/ barrel Capacity:1500MT/ A Storage and Transportation:Handle with care,keep airtight and dry. Specification: Item Conforming article Quality goods Purity, %(m/m) â?¥98 â?¥99 Water content, %(m/m) â?¤0.5 â?¤0.5 Melting point, â?¥181decomposition â?¥185decomposition Acidity, mg KOH/g 270~280 270~280 Chroma( 25% water solution) , Co-Pt â?¤30 â?¤10 Non-volatile matter, %(m/m) â?¥99 â?¥99 Fe, %(m/m) â?¤0.0005 â?¤0.0005
Technical Parameter Max web width 330mm Max printing width 320mm Max unwinding dia 1000mm Max printing speed (Production speed depending on process, job etc.) 60m/min Gear pitch 3.175mm (1/8) Printing unit(IR drier) 3 units Printing repeat 56T-112T�1T=3.175mm� Air shaft diameter 76mm Printing plate diameter 1.7mm Mounting tape 0.38mm Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Wannan Converter Yaskawa, Japan Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Button switch Schneider Electric Components CHINT or Schneider Web guiding ZXTEC Configuration Simple mounter 1 pcs Printing cylinder 1 set (3 pcs) Ceramic anilox roller 1 set (3 pcs) Tool box 1 set Measurement & Weight Measurement 3200*1160*2150mm Weight 2600kgs 450 Paper Straws Slitting Machine Technical Parameter Max web width 450mm Max unwinding dia 1000mm Slitting width 10-18mm(un-adjustable) 18-450mm(adjustable) Speed 80m/min Max rewinding dia 450mm Cutting precision 士0.5mm Operator 1 person Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Lichao Converter 2.2KW, Schneider Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Magnetic powder Guangtai Web guiding sensor HENGWANG Button switch Schneider Circular 1 set of 15mm width 1 set of 13.5mm and 14mm Air cylinder Jingwei Configuration Tool box 1 set Measurement & Weight Measurement 2850*1280*1320mm Weight 900kgs
Technical Parameter Max web width 330mm Max printing width 320mm Max unwinding dia 1000mm Max printing speed (Production speed depending on process, job etc.) 60m/min Gear pitch 3.175mm (1/8) Printing unit(IR drier) 3 units Printing repeat 56T-112T�1T=3.175mm� Air shaft diameter 76mm Printing plate diameter 1.7mm Mounting tape 0.38mm Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Wannan Converter Yaskawa, Japan Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Button switch Schneider Electric Components CHINT or Schneider Web guiding ZXTEC Configuration Simple mounter 1 pcs Printing cylinder 1 set (3 pcs) Ceramic anilox roller 1 set (3 pcs) Tool box 1 set Measurement & Weight Measurement 3200*1160*2150mm Weight 2600kgs 450 Paper Straws Slitting Machine Technical Parameter Max web width 450mm Max unwinding dia 1000mm Slitting width 10-18mm(un-adjustable) 18-450mm(adjustable) Speed 80m/min Max rewinding dia 450mm Cutting precision 士0.5mm Operator 1 person Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Lichao Converter 2.2KW, Schneider Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Magnetic powder Guangtai Web guiding sensor HENGWANG Button switch Schneider Circular 1 set of 15mm width 1 set of 13.5mm and 14mm Air cylinder Jingwei Configuration Tool box 1 set Measurement & Weight Measurement 2850*1280*1320mm Weight 900kgs
Technical Parameter Max web width 330mm Max printing width 320mm Max unwinding dia 1000mm Max printing speed (Production speed depending on process, job etc.) 60m/min Gear pitch 3.175mm (1/8) Printing unit(IR drier) 3 units Printing repeat 56T-112T�1T=3.175mm� Air shaft diameter 76mm Printing plate diameter 1.7mm Mounting tape 0.38mm Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Wannan Converter Yaskawa, Japan Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Button switch Schneider Electric Components CHINT or Schneider Web guiding ZXTEC Configuration Simple mounter 1 pcs Printing cylinder 1 set (3 pcs) Ceramic anilox roller 1 set (3 pcs) Tool box 1 set Measurement & Weight Measurement 3200*1160*2150mm Weight 2600kgs 450 Paper Straws Slitting Machine Technical Parameter Max web width 450mm Max unwinding dia 1000mm Slitting width 10-18mm(un-adjustable) 18-450mm(adjustable) Speed 80m/min Max rewinding dia 450mm Cutting precision 士0.5mm Operator 1 person Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Lichao Converter 2.2KW, Schneider Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Magnetic powder Guangtai Web guiding sensor HENGWANG Button switch Schneider Circular 1 set of 15mm width 1 set of 13.5mm and 14mm Air cylinder Jingwei Configuration Tool box 1 set Measurement & Weight Measurement 2850*1280*1320mm Weight 900kgs
Technical Parameter Max web width 330mm Max printing width 320mm Max unwinding dia 1000mm Max printing speed (Production speed depending on process, job etc.) 60m/min Gear pitch 3.175mm (1/8) Printing unit(IR drier) 3 units Printing repeat 56T-112T�1T=3.175mm� Air shaft diameter 76mm Printing plate diameter 1.7mm Mounting tape 0.38mm Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Wannan Converter Yaskawa, Japan Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Button switch Schneider Electric Components CHINT or Schneider Web guiding ZXTEC Configuration Simple mounter 1 pcs Printing cylinder 1 set (3 pcs) Ceramic anilox roller 1 set (3 pcs) Tool box 1 set Measurement & Weight Measurement 3200*1160*2150mm Weight 2600kgs 450 Paper Straws Slitting Machine Technical Parameter Max web width 450mm Max unwinding dia 1000mm Slitting width 10-18mm(un-adjustable) 18-450mm(adjustable) Speed 80m/min Max rewinding dia 450mm Cutting precision 士0.5mm Operator 1 person Speed Control By converter Power Supply 380V/3Phase/50HZ Control System Motor 2.2KW, Lichao Converter 2.2KW, Schneider Unwinding tension controller ZXTEC Rewinding tension controller ZXTEC Magnetic powder Guangtai Web guiding sensor HENGWANG Button switch Schneider Circular 1 set of 15mm width 1 set of 13.5mm and 14mm Air cylinder Jingwei Configuration Tool box 1 set Measurement & Weight Measurement 2850*1280*1320mm Weight 900kgs
We are very glad to offer the best price based on your items list with our min quantiy order. Please check full details in attached file. We offered the best price with hope to get a chance to set up business together with you. Waiting for your feedback. Some information: 1/ Our price is FOB HO CHI MINH PORT, VIET NAM. 2/ MOQ: 1x20fcl (You can mix 3-4 models style/1x20fcl) (5-6 models style/1x40fcl) 3/ Payment: T/T 40 deposit and balance after fax copy Bill or L/C at sight. 4/ Delivery time: 30 days for 1x20fcl, 40-45 days for 1x40fcl HQ Features of plastic fiber: - Anti UV - High color fastness - Resistant to salt and chlorine - Resistant to rain and moisture - Resistant to mould and bacteria - 100% recycle - Strong and durable - Washable and easy maintance Specification: - Aluminium frame with powder coated are fade resistant and UV protected, thickness 1.2mm - Woven with made-in Vietnam plastic fiber. Cushion: Polyurena foam inside/ water resist polyester fabric cover. Top of table with tempered glass. Packaging: wrapping carton paper 2 layers and PE film shrink cover. If you have any other points that you want to make clear, do not hesitate to contact us. Have a nice day! Please see attach file for more list price and picture.
We are very glad to offer the best price based on your items list with our min quantiy order. Please check full details in attached file. We offered the best price with hope to get a chance to set up business together with you. Waiting for your feedback. Some information: 1/ Our price is FOB HO CHI MINH PORT, VIET NAM. 2/ MOQ: 1x20fcl (You can mix 3-4 models style/1x20fcl) (5-6 models style/1x40fcl) 3/ Payment: T/T 40 deposit and balance after fax copy Bill or L/C at sight. 4/ Delivery time: 30 days for 1x20fcl, 40-45 days for 1x40fcl HQ Features of plastic fiber: - Anti UV - High color fastness - Resistant to salt and chlorine - Resistant to rain and moisture - Resistant to mould and bacteria - 100% recycle - Strong and durable - Washable and easy maintance Specification: - Aluminium frame with powder coated are fade resistant and UV protected, thickness 1.2mm - Woven with made-in Vietnam plastic fiber. Cushion: Polyurena foam inside/ water resist polyester fabric cover. Top of table with tempered glass. Packaging: wrapping carton paper 2 layers and PE film shrink cover. If you have any other points that you want to make clear, do not hesitate to contact us. Have a nice day! Please see attach file for more list price and picture.
