Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
We provide the full range service including design, manufacturing, installation. We design and manufacture equipment for new type dry method cement production line, for which the capacity varies from 50t/d to 3000t/d. OUR ADVANTAGE 1.High Efficiency Cement production line adopts advanced technology and equipment to raise technical level and to ensure design indexes. New five-stage cyclone pre-heater system, high efficiency air girder grate cooler, multi-passage pulverized coal burner, Davison heat temperature fan, jet pulse dust collector, as well as chain-board elevator, chain conveyor adopted in this production line can ensure that the technology is advanced compared to other production lines with the same scale. 2.Saving Energy Measures have been taken to save energy and reduce consumption. using chain-board elevator and air slides, reliability of the system is enhanced and conveying energy consumption is decreased. 3.Environmental protection Effective measures have been taken to guarantee strict environment protection standards. Different efficient dust collectors are set at all dust producing points according to different characteristics of waste gas. 4. High degree of automation There is no manual operation in the process of mill running, which realizes the automatic control with long-term, stable, effective, makes milling process more stable, realizes fine work of production. Mined limestone is delivered to the crusher for crushing by the belt conveyor, limestone after crushing ,clay, iron powder etc will be ground into powder by ball mill or vertical mill, and then transported by air delivery chute to raw meal homogenization silo for storing and further material mix. Raw meal shall get into the preheating decomposition system after homogenization where decomposition rate is about 95%, and raw meal is calcined into clinker in the rotary kiln, the formation of clinker. Clinker, gypsum and mixture is ground into qualified fineness cement in the cement mill. Powder classifier is adopted to adjust the fineness of cement, realizing energy saving production. Cement packing machine and automatic loading machine are used for bagged cement delivery, and cement bulk device for cement canning leaving factory.
Single sided butyl tape, also known as composite type sealing tape, is a double layer composite sealing adhesive tape, one layer is self adhesive sealing tape, the other layer is butyl rubber, single sided butyl sealing tape composed by these two layers, and last covered with isolation paper and rolled into rolls. When using it, only need to tear up the isolation paper covering and winded use. It is popular used in steel structure factory building roof, metal roof patch and other construction projects cracks patch. Also suitable for sealing waterproof of pipe as well as fan with roofing lap joint, glass curtain wall, door and window sealing waterproof, etc. Specifications: Product name: single sided butyl tape. Material: butyl rubber and poly isobutene blending. Color: black, isolation paper can be yellow or white. Common width: 1 cm - 10 cm. Common thickness: 1 mm - 10 mm. Shelf life: twelve months. Service life: up to 20 years or more. Features: Excellent UV resistance. Simple construction, precise dosage. Easy to use: tear up the isolation paper. Without any solvents, safety and environmental friendly. Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance. Butyl rubber material can keep permanent flexibility, good following nature and excellent waterproof sealing. Reliable application performance: its adhesion, waterproof, sealing, low temperature resistance are good, size stability. Excellent mechanical properties: bond strength, high tensile strength, good elasticity and elongation performance, strong adaptability to interface deformation and cracking. Applications: Single sided butyl sealing tape is mainly used for external anti-corrosion seal of steel pipeline in high voltage wire, cable joints, petroleum, drainage, pollution discharge, chemical and other industries. Packaging: Single sided butyl tape is packed with carton box. Carton size: 40 cm � 40 cm � 18 cm. Note: Transport: In the transport process, Single sided butyl tapes should be prevented from sun and rain, collision and extrusion packaging. Non dangerous goods transportation. Stacking layers of packing carton boxes should not be more than four. Storage: Single sided butyl tapes should be stored in a dry place with no more than 35°C, in order to avoid contact with the volatile solvent. Stacking layers of packing cartons should not be more than four.
Magic Sponge Manufacture The magic cleaning sponge is a new cleaning material in the cleaning field. The material is not common� plastic, but a polymer raw ingredient called melamine foam. Many people know magic erasers very well. It is the name of a famous retail brand-Mr. Clean. The name of magic sponge, magic cleaning sponge, and magic melamine foam is the same as the magic eraser. Although they have a different names, the product is the same total. So you donâ??t need to concern about the difference in product or quality because of different names you saw online. After clearing this problem, then we can move to product or quality diversity due to supplier differences. If you donâ??t care about the money, that will be easier to pick up the high-price sponge directly. Normally the quality can be guaranteed. I believe that the best option for us is cheap and good quality. When you google the names, you will find much product marketing information. And the sponges they are selling are similar. If buying magic sponges from Amazon, you will check their reviews and compare the prices. Here are two suggestions: 1. Buy bulk packages. Good packages, boxes, or fancy bags will not help the quality of magic sponges but increase the unit prices. Bulk packages mean lower production costs and transportation costs. After checking the reviews, if you still worry about the quality, you can buy a small package from them to test first. 2. Let the seller send a product video to you in advance. High-quality magic cleaning sponge has fine open cells, and not many big holes on the surfaces. With good flexibility, premium melamine foam has excellent resilience after pressing. In addition, the color is snow white, not yellow. We already know how to buy magic sponges and choose a supplier. Then there will be another problem following up. Does the supplier provide consistent quality sponges all the time? Once we bought another bulk and find the quality is not good same to before. That will be a bad situation. All suppliers you saw online, are retailers and purchased from wholesalers. So if we can find a direct manufacturer, that will solve this problem perfectly. Mr.Topeco is a direct manufacturer in China with more than 20 years of factory, exporting sponges to more than 40 countries. The reviews are great, no one is bad after checking their shop. No matter the price or quality of the magic cleaning sponges, they will get a guarantee from Topeco Clean. Here is their website, very professional. At the same time, I am also doing business with magic sponges. Here are many different types, high-density magic sponges and original sponges, and also popular magic sponge sheets for disposable use. The quality is good as Mr.Clean. I am a big fan of magic cleaning sponges, studying them for a long time. It helps my cleaning works much. Any questions about it, welcome to leave me messages to talk.
Produce and Offer Hand Sealing 8"/200 mm/8 inch/20 cm Length With Sealing 2.0 mm Width Electric Flat Heat Wire Poly Film Tubing Sealing Machine PFS-200 Manual Impulse Plastic Bag Heat Sealer From Zhejiang Tianyu industry Co. Ltd. Supplier Factory of China.Hand Poly Film Tubing Sealing Machine PFS Series Manual Impulse Plastic Bag Heat Sealer does not need a power switch (automatic control) to plug the AC power cord into the socket, and adjust the heating time according to the thickness of the material to be sealed. Place the plastic bag on the sealing surface, and then press the handle, the circuit automatically controls the heating time. When the indicator light goes out, Hand Sealing 8"/200 mm/8 inch/20 cm Length With Sealing 2.0 mm Width Electric Flat Heat Wire Poly Film Tubing Sealing Machine PFS-200 Manual Impulse Plastic Bag Heat Sealer Description: Fast Heating Power-Saving Impulse Sealer Machine. Keep sealing edges clean - prolong the life of the heating element. Clean with a dry cloth or alcohol. Damage to the sealing rubber will lessen the effectiveness of the sealer. For PE/PP bags used to package food products Impulse sealing for power saving Precision electric control circuit Adjustable Temperature Secure Tight Seal Sealing Length: 8"/200 mm/8 inch/20 cm Length Source: 110V / 60Hz,220V/50Hz Power: 300W Max Length for seal: 200mm Width for seal: 2 mm Max thickness for seal: 0.2mm (Max 6 Mil for PE, max 4 Mil for PP) Heat Time: 0.2 -1.5s Single phase variable temperature control CE and CCC Certified Suitable for: PE/PP Bags Impluse Sealing for: Power-saving Circuit: Precision Electronic Control Color: Light Blue,Green,White or Red Dimensions: 33X10X17.2 cm (L x W x H) Weight: 1260g Size: 8"/200 mm/8 inch/20 cm Plug Type: US Standard Material: Plastic ABS Unit of Measure: each Minimum Order Quantity: 50 Minimum Order Quantity for Calculation: 50 Quantity: each Hand Sealing 8"/200 mm/8 inch/20 cm Length With Sealing 2.0 mm Width Electric Flat Heat Wire Poly Film Tubing Sealing Machine PFS-200 Manual Impulse Plastic Bag Heat Sealer Package Contentsï¼? 1 x PFS-200 Hand Poly Film Tubing Sealing Machine Manual Impulse Plastic Bag Heat Sealer 1x 8"/200 mm/8 inch/20 cm Long Extra Spare Teflon sheet 1x 8"/200 mm/8 inch/20 cm Long Extra Spare Sealing 2.0 mm Width Electric Flat Heat Wire 1x English User Manual 1 PCS/Color Box Color box Size:33X10X17.2 cm PFS-200 Hand Poly Film Tubing Sealing Machine Manual Impulse Plastic Bag Heat Sealer Weight: 1.26Kg 10 PCS/CTN Carton Size:51X34.5X36 cm G.W/CTN:13.38Kg
Pellet machine is the equipment to make wood pellets,while wood pellets represent an alternative to the use of coal, gas and even traditional wood logs and chips.Wood pellets are cylindrical,compressed wood particles used as burning fuel. It offers better and more uniform heating properties per unit volume due to their low moisture content.There are many different types of pellet machine in china market,they mainly exists in these kinds:All of above pellet machine share the same raw materials to make pellets:--Forestry type:Â Wood waste like leaves,wood skin,bamboo,--Wood type:Wood log,wood chips,wood shaving,wood branch--Agricultrual type:groundnut-shell,sugarcane biogases,caster sheels/stalk,coffee husk,rice husk,paddy straw,sunflower stalk,cotton stalks,tobacco waste,mustard stalk,wheat straw,palm husk,wood chips,wood waste and so on.--Palm fiberStructure Description of vertical pellet machine1.Upward mold.Vertically feeding,never buff placer,and easier heat dissipation2.Mold vertical, machine is easier fixing,and stable running;3.Pressing wheel rotates,and makes materials centrifugal,evenly spread4.Double mold, upper and under double-use,reduces the cost and increase the efficiency5.Cooling system, makes process room get sufficient cooling, which gives protection to machine's long-term stable operation.Specifications of vertical pellet machineâ??G typeTypeVerticalâ??G seriesModelMZLV480GMZLV560GMZLV700GPower (kw)557590132160Capacity (t/h)0.6~0.81~1.21.3~1.72~2.52.5~3Ring die (mm)480480560560700Remark2-layers ring diewe have G(gear box type),and R(reducer type)Packing of pellet machine: in export standard,if FCL in nude,if LCL,in strong plywood case.Shipping of pellet machine: Lead time is 7 working days in standard specification,15~20 working days if customized.Liyang Tongfu Machinery CO.,Ltd,which located in Liyang city(the birth-place of wood/feed ring die pellet machine/pellet mill),Jiangsu province,south area of China,is specialized in designing & manufacturing comprehensive range of pellet machines for biomass pellets and animal feed pellets with over 10 years experience.Owning a strong and professional team, we can offer full scale service to our customers by developing projects from blueprint, customized solution, machinery production to installation and commission of complete wood and feed pellet plants.Our ring die wood pelletizer/pellet machine has been sold to over 20countries all over the world,all of them with CE certificate,final pellet from our machine strictly follow EN standard.As the best pellet machine supplier,we offer low price pellet mill and discount too,if want pellet machines quotation,welcome contact freely,our pellet line in China are welcome your visit at any time.
Ripple Paper Cup What are corrugated paper cups? A corrugated paper cup is a disposable paper container used for daily drinking. It has a cup shape and a corrugated paper cup wall with a neatly arranged outer layer. It has a very strong heat insulation effect and is further improved on the basis of a disposable paper cup. It should be said accurately that the corrugated cup is a new type of coffee cup. Its birth makes up for the shortcomings of the traditional hot drink cup which is easy to burn the skin and is not easy to carry. The corrugated cup makes more urban people who love coffee and can easily and freely use coffee while walking, without worrying about the temperature of the cup. Features of corrugated paper cups Keeps coffee warmer for longer Specially designed with built-in insulation to keep your coffee pleasantly warm while ensuring your hands stay comfortably cool. The reinforced design eliminates leaks Reinforced seams eliminate leaks to ensure the outside of each cup stays dry No more mess on your desk or inside your car cup holder! Built-in insulation keeps your hands cool Thanks to the sturdy double-wall construction, these cups stay cool to the touch and will never burn your fingers. No need for expensive sleeves or wasteful double cupholders! Unique ripple-like texture Prevents annoying messes and spilled drinks! The corrugated texture ensures that you can hold each cup comfortably and non-slip. Each cup features the words "Recycle Me" Made from premium recyclable paper and decorated with "Recycle Me" to remind you to enjoy your take-out drinks responsibly. Tightly stacked to prevent damage Tightly packed to save space and prevent accidental dents or damage Gently squeeze and twist each cup to remove it from the sleeve.
100% FREE OF LATEX, RUBBER, POWDER, PROTEIN: Protect your hands from any nasty bacteria with the most skin-friendly vinyl single use gloves. Completely Powder, Natural Latex, Rubber & Protein Free, these multipurpose gloves are perfect for an array of uses without causing the slightest discomfort. A safe choice even for people with skin sensitivities or those allergic to rubber and latex. EXCELLENT QUALITY DURABLE NITRIPRIDE VINYL â?? NITRILE BLEND GLOVES: Made of the highest quality vinyl and Nitrile materials, the Medpride latex-free gloves are extra durable yet comfortable to your skin. Stronger and thicker than regular nitrile gloves, they offer improved tactile sensitivity and work great for both commercial or industrial use! AMBIDEXTROUS GLOVES â?? BULK VALUE OF 1000: Form fitting with an ambidextrous design, these medium single-use gloves are extremely easy to put on and remove without taking a toll on your dexterity. Coming in a great value-pack of 100 gloves, in a handy dispenser box for easy use and storage, you will always have access to a fresh pair of protective gloves! ENDLESS USES FOR MEDICAL PROFESSIONALS & BEYOND: The medical quality exam gloves are great for doctors, medical experts, nurses, dentists, caretakers, veterinarians or any other health professional. Practical and versatile, they can be used for cooking and food prep services, pedicure, painting, cleaning and more. Plus, they double as protective gloves to safeguard your hands from common bacteria.
STEP.1)- CLEANSER : Bridal Cleaner for deep cleansing impurities for the epidermal skin layer. It helps in restoring the natural moisture balance of the skin... USAGE STEP.1)- Apply a little quantity on the skin and gently massage in circular motion on the face & Neck for 3-4 min. Then Clean with wet cotton or water thoroughly... STEP.2)-Gold SCRUB : Scrub with Contain grain and fuller's earth is suitable for customers who have black hands on their skin. It helps in giving anti-septic effect and reduce the black heads and dead cells, its walnut shell particles unclog pores and mild surfactant's gently clean the pore from deep inside leaving a soft, fresh and healthy young skin... USAGE STEP.2)-After Cleansing the skin apply small quantity of scrub on the wet face & neck. Rub gently with fingertips in circular motion of 4-5 minutes, leaving the eye area. wash thoroughly with water. STEP 3 : Gold MASSAGE CREAM : This cream enriched with the goodness of fresh lemon is not just soothing and disinfecting, It is capable of penetrating into the skin layers adding nourishing oils, deep skin conditioning and softness to the skin... USAGE STEP 3)- Gently massage the cream on the wet face & neck for 10-12 minutes. Clean with moist cotton I water... STEP 4)- FACIAL GEL : This non-sticky massage gel gives fresh base, relaxation and cooling effect. It Soaks out the sediment-ed oil, dirt and pollution from the pores. keeping it matt dry there by making skin smoother and shinier. USAGE STEP 4)- Gently massage the wet face & neck for 5-6 minutes. clean with moist cotton I Water. STEP 5)- FACE PACK : This Pack helps in improving skin texure, repairs the injured cells which in turn lighten the melanin content and restores the true match of the skin pigment. USAGE STEP 5)- Apply the requird quantity of face pack in a smooth layer on the face. Leave it on for 4-5 minutes till it dries. Gently massage with wet hands to clean, wash the thoroughly with water.
Aluminium alloy milk can and stainless steel milk cans. Types of Milk Cans 1. Plastic Milk Can 2. Stainless Steel Milk can 3. Aluminium Alloy Milk can The aluminum can is used for transporting milk from farms to dairy plants. Plastic Milk Can Plastic milk cans have a low life expectancy say of a maximum of 4 to 5 years and there are hygienic issues when the plastic milk cans are cleaned and brushed from the inside it create scratches inside which will become the house for bacterial growth. Stainless Steel Milk can Stainless Steel Milk Cans at one hand are hygienic but on the other hand, SS Cans are made of thin Stainless sheets hence the temperature rise in S.S. milk cans is highest in comparison to Plastic and Aluminium Alloy. Also, SS Milk Can is prone to damage and cracks in transportation due to rough handling due to brittle in nature. Aluminium Alloy Milk can Aluminium Alloy Milk Can have a maximum life expectancy of 10 to 12 years. It has better insulation hence among Plastic and Stainless Steel further it is a monoblock design hence it is hygienic as well. Hence Aluminium Alloy Milk Cans will win the competition out of plastic and Stainless Steel Cans. Aluminum Alloy Milk Can price you pay will, at last, will give value for the money you will invest. 100% Aluminium Alloy Sheets. Aluminum is the world s most abundant metal and is the third most common element, comprising 8% of the earth s crust. The versatility of aluminum makes it the most widely used metal after mild steel. aluminum Milk Cans can be recycled hence economically and environmentally friendly. Aluminum is one of the lightest engineering metals, having a strength-to-weight ratio superior to steel hence best for the transportation of milk. It is not only non-toxic but also does not release any odors or taint products with which it is in contact. Milk in cans is uncooled or barely cooled, Alloy Aluminium Milk Cans ensure low heat transfer in comparison to other materials of construction for milk cans.
Product Features: Spindle type mechanical transmission, hydraulic feed. Hydraulic retracting lets drill body away from the drilling hole. Hydraulic chuck, hand-powered chuck and hand-powered cylinder chuck, they are exchangeable. Friction hoist, percussion drilling, easy to pull and push casing if equipped with vibrator. Advanced design, reasonable arrangement, compact structure, beautiful looking. Light weight, good detachability, easy to operate. Equipped with special 6mA type derrick for user ordering. Product Parameter: Drilling depth 200m Hole(Drill bit) diameter (mm) Φ115-350 Adaptable formations Loose soil and bedrock (Hardness f=6~20) Drilling method Top drive rotation, hydraulic feeding, work with mud pump or DTH hammer Rotary speed (rpm) 60�160 Torque (N.m) 5000�6500 Feeding force (Ton) 8 Lifting force (Ton) 16 Tool winch lifting force (Ton) 1.5 Drill pipe dia. Φ76/Φ89 Drill pipe length 3000 Air pressure (Mpa) 1.05-2.46 Air consumption (m3/min) 16-35 Diesel engine YN33GBZ Engine parameter 65kW/2400rpm Walking speed 0�2.5 Climbing capacity 20 Distance from ground 250 Dimension (mm) 4000x1900x2600 Unity weight (kg) 6000
Goat/sheep/cow leather driving gloves, working gloves, winter gloves Driving gloves, working gloves, welding gloves, & apparel available in cow split leather, sheep, goat, cow leather, color as per buyer requirement, size as per buyer requirement, thickness: 1.2-1.4 mm (as per buyer demand), use for welding and or any other important sectors of industries like welding, working, driving etc., packing as per buyer requirement. We are also a leading company in paksitan Which is importing a big quantity of split wet blue from italy, our All production is made from our imported italian material split Leather. We are also having a joint venture with m/s ellea Unipersonale srl italy to sale our safety items through all the Europe, we are well understand about reach compliance(testing) and all International standards. We have enough capacity to fulfill your any Order so in this regards please give us a chance to serve you as per Your standerds and specifications. Moreover we also have stock ware House in uae where in short notice we can deliver any products within Short period. Waiting for your kind response. Safety gloves, gloves, welding gloves, working gloves, leather gloves, hand protection, hand gloves, safety items, safety products, safety, drivers gloves, gosh safety worldwide, gosh safety leather gloves, leather products, leather jackets, leather safety gloves, leather, safety, driving gloves -
