Model L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 400(294)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.85 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 77 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 360(265)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 67 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model MD196TI Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 320(235)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 16.5 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 61 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model TK450 (TaePyongYang) Gear ratio 1.97 2.53 3.04 3.42 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,397 x 933 x 1,077 with M. gear mm 1,695 x 933 x 1,155 Engine dry weight without M/G kg 1,009 with M. gear kg 1,329
Model L086TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 315(232)/2300 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.66 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 62 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A (Dong-I) Gear ratio 1.77 2.09 2.42 2.82 3.19 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,364 x 919 x 965 with M. gear mm 1,552 x 919 x 1,062 Engine dry weight without M/G kg 790 with M. gear kg 1,015
Model L136TI Engine type 4 cycle In line direct injection water cooled with turbo charger inter cooler Rating output BHP PSkWrpm 2301692200 Displacement cc 8071 Cylinder number bore x stroke mm 6 111x 139 Mean piston speed msec 1019 Compression ratio 167 1 Firing order 1 5 3 6 2 4 Governor type of injection pump Mechanical all speed RSV Fuel consumption lit h 45 Starting system Electric Starting by starter motor Starter motor capacity V kW 24 45 Alternator capacity V A 24 50 Battery V Ah 24 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max Min lit 27 25 Fresh water pump type Centrifugal type driven by V belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A DongI Gear ratio 177 209 242 282 319 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size L x W x H without MG mm 1364 x 911 x 937 with M gear mm 1552 x 911 x 1027 Engine dry weight without MG kg 773 with M gear kg 994
Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938
Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
DDS5558 Single Phase Meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. It has minimum size, and also a new single phase two wire active energy meter. It has already passed the test of the international authority CE. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net. This meter has white backlight source eight digits LCD monitors shows the active energy power consumption. It has following features: Good reliability, small volume, light weight, specious nice appearance, convenient installation, etc. Features: Bi-directional total active energy measurement 25mm standard DIN rail installation, complying with standard DIN En50022. Single pole width (Modules17.5mm), complying with standard DIN43880. Small modular size, DIN rail mounted. Easy installation to distribution boards, load center, miniature & etc. by identifying where energy is being used. Application: All power parameter measurements; Energy measurement and electrical fire monitor and control; Replacing the three-phase power meter, three-phase electricity transmitter; Transformers, generators, capacitors, and electric motors distributed detection; Medium and low-pressure systems; SCADA, EMS, DCS integrators.
ARSPL UPVC ROOF SHEET 1) Heat insulation up to 40%. Excellent Thermal Insulation: Thermal Conductivity 0.104 W/m* C 2) Excellent sound insulating properties 3) Resistance to acids, alkalis, salts and solvents, corrosion 4) Resistance to the extreme weather conditions: snow, hail, high wind â??pressure 5) High Strength Characteristic: Tensile Strength 29~31 MPa, Flexural ` strength 45~55MPa, Impact Resistance 50~60kJ/m2 6) Temperature usage Range: from -40 C to +75 C. Material `withstands over 100 cycles of freezing and thawing 7) Color Fastness: Pigments used are 8 points on the BW Scale 8) Light Weight: 3.6Kg/m2 9) Resistance to the influence of ultraviolet rays. Highly UV protected. 10) Non-combustible nature of the material. Class B1 Retardant Building Materials. Fire Retardant. 11) Easiness of installation: material can be easily cut, drilled, and sawn 12) Absolute waterproof properties 13) Flexibility: material allows roofing of hanger-type structures and spherical fencing 14) Economical Installation: overlapping waste doesnâ??t exceed 8%. High utilization efficiency up to 95% 15) Availability of the same profile transparent sheets for the creation of sky-- lights. 16) Wide Variety of available colors. Good aesthetic appeal. 17) Cost-effective in installation and saves construction costs up to 70%. 18) Eco-friendly & Energy Efficient Green product. 19) Non-Carcinogenic 20) Increases labor productivity and machinery efficiency 21) Non-conductor of electricity. 22) Long life 23) Compulsory for some industries like chemical, pharma, fertilizer, leather, process, etc.
ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
DL-2 model electric air heater with Left-Right Circulation is consists with 6 parts: electric heater + inner tank + insulation box + fan +fresh air damper + control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by electric heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Automatic control system, group start and close, low load, precise temperature control 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
1. BLOW ROOM LINE COMPLETE 2007/08 LMW: MPO, LB3/6-1600MM, Condenser, Mono, Unimix L87/4 R., Flexiclean, Vetal Scanning, Fan, Pipe Line, Fire Line, Panel Board 2. CARDING 2007/08: LC-300A-V3 AZU Chute, 24-45 Coiler/11 NOS, LC300A-V4, 1 NOS 7/6 Chute, 24-45 Coiler 3. DRAWING 2007/08: LD/2-1 NOS, DO6/2 NOS, LMW R58853/3 NOS, Coiler 18-45 4. COMBER LINE 2007/08: LKS4-5 NOS, LK64-1 NOS, LH-20 Lap Former, NOS 2007/08 5. SIMPLEX SPEED FRAMES 2007/08: LF1400 A-144 SPL/S NOS, 7 Row Grill, 30MM Roll, Positive Clear, 4 Over 6. RING FRAMES 2007/08: 21/NOS - LMW LRG/5-1200 SPL, 36 MM Ring, 27-27-27 Roll, 170MM Lift, 18.5 SPL, P3-1 Drafting, Overhead Cleaning, Jagobi 7. AUTOCORNER: SCLAFHORST SAURER 338/6 NOS, 60 Drums, Gold 2007 Round Machine, 9 Pocket Quantum, Z Clear, D23 P, 2.5 Turn, 5.5 Degree Holder, AC-6/2017 Make, 60 Drums-1 NOS
Looking to upgrade your spinning mill? You're in luck! Siddhi Impex brings you an incredible opportunity to purchase high-quality Second hand LMW spinning machines at unbeatable prices. Act fast because we have limited stock available. 1. BLOW ROOM LINE 2010 MAKE MPO LB3/6 1600 MM Condenser Mono Flexi Clean Applied Scanning Condenser Fan Fire Line 2. CARDING CHUTE FEED 2010 MAKE LC-333/5 NOS LC361/2 NOS LC363/1 NOS 3. DRAWING 2010 MAKE LD/2-1 NOS DO/6-1 NOS LR-RSB 851/3 NOS All in 18-45 Coiler Size 4. SIMPLEX SPEED FRAME. 2010 MAKE LF1400-A/144 SPL 4 NOS 7 Row Grill 30 MM Roll 5. RING FRAMES 2010 MAKE 18 Units LR6/S 1200 SPL 38MM Ring 170MM Lift 18.5 SPL 27-27-27 Roll P3-1 Drafting Each with Overhead Cleaning JAGOBI.../21600 SPL Total 6. AUTO CORNER 2010 MAKE AC-5/5 NOS Round Machine Types 9 Pocket Quantum 2 Clear 2.5 Turn 5.5 Degree Holder DZ-3 Prizm Auto Drafting Why Choose Siddhi Impex for Your Machinery Needs? Quality Assurance: We pride ourselves on offering only the highest quality machinery, backed by our commitment to rigorous inspection and maintenance processes. Competitive Pricing: Our competitive prices make upgrading your spinning mill more cost-effective than ever. Reliable Partner: With a track record of excellence and satisfied customers, Siddhi Impex is your trusted partner in the textile machinery market. Empty Run Service: We provide empty run service in order to ensure that our machines are well maintained and of High-quality If you are interested in purchasing the Second hand Spinning LMW Unit or any other Second hand spinning machiner
We are among the pre-eminent organizations, involved in manufacturing, supplying, trading and exporting Electronic Water Conditioner. The offered product is widely demanded by customers to change hard water molecules to soft crystals. These products are available in different models and can be customized as per the specifications laid down by the clients. Features: Easy to install Longer life Low power consumption Other Details: Easy to install i.e. no plumbing or special skills needed No maintenance - set it and forget it Safe low voltage, low power Takes very litter space Wrap the signal cable and plug converter into 110 volt outlet Treats hardness from 3 grains No salt or chemicals needed Water lathers and rinses easily Prevents scale formation Reduces detergent use Increases water heater efficiency Prevent scale formation Reduces detergent use Increases water heater efficiency Removes existing scale in 90 days Won't clog shower heads, coffee pots, dishwashers Two year Warranty Benefits: Reduces scale-saves 5 % or more fuel Eliminates scale-control chemicals Reduces fouling of dishwasher jets Reduces downtime for de scaling Reduces soap and detergent use Economical to install and operate Eliminate scale buildup on electric heating elements Reduces calcium spotting and soap usage in bottle cleaning Applications: Gas-fired and electric boilers Cooling towers Commercial ice makers Decorative fountains Evaporative coolers Commercial laundries Hotel and Motels Breweries Plastic injection molding Paper and pulp mills Specifications: The system comes complete with converter, signal cable, cable ties, transformer, mounting screws and instruction manual Commercial Models: Our products are also constantly available for commercial application that uses 1, 2, 4 and 6 inches plastic, copper or steel pipe Uses less than 10-watts of electricity
HOME ABOUT US PRODUCT CASES NEWS CONTACT US English HOME ABOUT US PRODUCT CASES NEWS CONTACT US HOME > PRODUCT > FIBERGLASS NEEDLED MAT FIBERGLASS NEEDLED MAT Product Fiberglass needled mat Material:E-glass fiber Thickness ï¼?mmï¼?:3mmâ?½30mm Density:100â?½180kg/m�³ Thermal conductivity:0.030â?½0.039W/m�·kï¼?25â??) Max temp.:700â?? Long term temp.:550â?? Features Low price, fireproof, flame retardant, and high temperature resistant Product Descriptions How is a fiberglass needled mat made? The fiberglass needled mat is made from alkali-free glass fiber yarn as raw material, with a single fiber diameter of 7 to 9 micrometers. The fibers are cut into short lengths ranging from 6cm to 9cm, and then subjected to carding and decomposition to create an extremely fine felt-like material. This material is then fed into a needle punching machine, where it is continuously stitched using thousands of needle punches. Its main components are silica, alumina, and calcium oxide. What are the features of a fiberglass needled mat? It exhibits exceptional properties such as heat resistance, tensile strength, durability, fire resistance, corrosion resistance, and electrical insulation. It also offers outstanding insulation, sound absorption, and dust removal efficiency surpassing that of fabric filters. Where is the fiberglass needled mat used? The fiberglass needled mat is usually used as thermal insulation for such domestic appliances as barbecue grills,electric ovens, microwave oven, coffee cooker, water heater and other appliances need better energy effiency and less cooking time. Available in rolls or die cut pieces based on buyerâ??s drawing and request. The fiberglass needled mat can also be laminated or fabricated with foil facing, aluglass cloth facing, stitched with glass fabric or glass fabric bag, or coated with self adhesive Small sample pieces are available free based on request and freight to collect. For more info, pls don't hesitae to contact us! www.pdb-insulation.com
Explosion-proof electric ball valve overview: The electric explosion-proof ball valve is mainly composed of an explosion-proof actuator and a ball valve. It is an electric explosion-proof valve used in flammable and explosive conditions. The electrical components on the explosion-proof electric ball valve are required to be fire-proof and anti-static, and all meet the explosion-proof standards. The explosion-proof grade is ExdIIBT4 (CT6), and the protection grade is IP87. The electric explosion-proof ball valve can control the valve switch by inputting the relevant power signal, and can control the operation of the ball valve by inputting the 4-20mA signal and 220/power supply for proportional adjustment, so as to achieve the automatic control of the medium flow, pressure, temperature and other parameters in the pipeline. Applied to explosion-proof occasions such as natural gas, sewage, gas, coal mine, chemical industry, etc. EXDIICT4 grade explosion-proof electric ball valve Explosion-proof electric ball valve features: Explosion-proof Shendong modified valve means that the curved heat actuator of the ball valve h meets the explosion-proof standard. It is used in places requiring explosion-proof, such as liquid or gas (inflammable and explosive places in the chemical industry, used to open and close the valve. Or section, explosion-proof valves can be divided into intrinsically safe type and explosion-proof type. The intrinsically safe type uses a DC motor, and the explosion-proof type uses an AC motor. control, and can also be operated on site. Electric explosion-proof ball valve standard specification: 1. Design and manufacture: GB12237-89, API608, API 6D, JPI7S-48, BS5351, DIN3357. 2. Flange size: JB/T74~90 (JB74~90), GB9112~9131, HGJ44~76, SH3406, ANSI B16.5, JIS B2212~2214, NF E29-211, DIN2543. 3. Structure length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202. 4. Inspection main test: JB/T9092, API598.
Products Characteristics: 3D Hollow Structure: Lightness,dimensional-stable, provide unprecedented creative space for designers in the next 10 years. Smooth Surface: The equally stress distribution, suitable hardness. Excellent Air-tightness: It can guarantee the normal use of more than 6 months after inflated one time under the worst beaches exposure environment. Isolation Ability: It can easily achieve isolation, soundproof and other functions. Safety: High tension strength,High tear strength,High stiffness give high compressive strength and durability, Durable that cloud folding resistance more than 10000 times. Market Competitiveness: Cost-effective , Easy next procedure processing, Simple to use and easy to carry which suitable for all ages groups. Extra characteristics: REACh, EN-71, RoHS, CPSIA, ASTM D963,UV resistance,An ti-chemical, Anti-bacteria, Anti-Mildew,Flame retardant and etc. Application: Water Games and Sports Projects: Air SUP Board(Air Surfboard) Water Games and Sports Projects Water Platform/Running Belt Air Life Raft Air Boat Stop Cushion Waterplay and Sports Park Water Recreation/Sightseeing Pavilion Air V-Shape Boat Hull Sport Leisure Projects : Sports Fitness/Gymnastics Facilities(Air Gym Matã??Air Trackã??Air Floor) Outdoor Camping Mat Air Sofa Air Swimming/Baby Pool Yoga Mat Airbed Air Car Mat Safety Protection Facilities Fire Rescue/Escape Air-Cushion Impact Cushioning/Buffer Medical Mattress Flood Control Air Cushion Sound Isolating Wall Air Lifting Bags Others Air Tents Stent Portable Advertising Display Wall The Cow Mat
Information Overview Type Cast Iron Dutch Ovens With Legs Metal Type Cast Iron Surface Finish Pre-Seasoned oil coating Color Black Brand Name Shengri or customized Certification EU, FDA, LFGB Place of Origin Hebei, China (Mainland) Shipping delivery port Xingang, Tianjin Delivery date About 45 days after 30% T/T deposit paid Model Number SRKD-001/002/003/004 Product Description Specification Item number SRKD-001 SRKD-002 SRKD-003 SRKD-004 Weight(kg) 4.5 7 9 11 Size(cm) D:8" H:11.5/15.5 D:10" H:13.5/18.5 D:12" H:16/21.5 D:35cm H:17cm (pot onlyï¼? Capacity 2QT 4QT 6QT 10QT inner box size (cm) 21.5*21.5*13.5 27*27.5*18 32*32*24.5 / Packing Size(cm) 23*23*28 55.5*29.5*20.5 33*33*50.5 35.5*35.5*25 Qty/ctn(pcs) 2 2 (11.44/13.5) 2 1 Qty/20'(pcs) 3780 2238 1018 880 Optional Accessories: pot lid lifter, trivet, carry bag Applicable Range: open fire Package: Customized inner box and outer carton
Aluminum sheet refers to a rectangular frame sheet made by rolling aluminum ingots. It can be pure aluminum sheet or aluminum alloy sheet. According to different application requirements, aluminum sheet can also be divided into different types such as thin aluminum sheet, medium thick aluminum sheet and pattern aluminum sheet. . Aluminum sheets have the characteristics of good light weight, corrosion resistance and thermal conductivity, so they are widely used in construction, automobile, aviation and other fields. The cross-section of the aluminum sheet is rectangular and the thickness is uniform, and when the thickness is greater than 0.2mm, it is usually delivered in a flat shape. Additionally, aluminum panels are often trimmed by shearing or sawing before delivery. Aluminum sheet uses: 1. Construction field. Aluminum panels are used to make building curtain walls, ceilings, interior and exterior wall decorations, etc. They have good fire protection and anti-corrosion properties and are suitable for exterior and interior decoration of high-rise buildings, commercial buildings, airport terminals, squares, stadiums and other buildings. 2. Transportation field. Aluminum sheets are used to make car bodies, roofs, windshield frames and other components. Because of their light weight and high strength, they help improve the fuel efficiency and safety of cars. 3. Electronic field. Aluminum sheets are used to make casings, heat sinks, circuit boards, etc. of electronic products. Due to their conductivity and corrosion resistance, aluminum circuit boards are widely used in electronic products. 4. Packaging field. Aluminum sheets are used to make food packaging, cosmetic packaging, etc., and have good moisture-proof, anti-oxidation, and fresh-keeping properties. 5. Aerospace field. Aluminum sheets are used to manufacture exterior panels, fuel tanks, boosters, etc. for aircraft, satellites, and other equipment. Because of their high strength, light weight, and corrosion resistance, aluminum materials have been widely used in the aerospace field. 6. Other fields. Aluminum sheets can also be used for mechanical parts processing, mold manufacturing, chemical pipeline wrapping, etc. Advantages of aluminum sheets: 1. Low density 2. Good electrical and thermal conductivity 3. Uniform coating and various colors 4. Easy to process 5. Strong corrosion resistance
