Product Details Main Difference Between Art Paper &art Board Coated paper and copperplate card are often used in printing, so what is the difference between copperplate paper and copperplate card.In general,coated paper is lighter and thinner than copper cardboard. The quality of copper paper is better. Uses are also different. The characteristic of coated paper is that the paper surface is very smooth and smooth, high smoothness and good gloss. Because the whiteness of the coating used is more than 90%, and the particles are very fine, and after the super calender, so the smoothness of coated paper is generally 600-1000s. At the same time, the paint is very evenly distributed on the paper and shows a pleasing white. The requirement for coated paper is that the coating is thin and uniform, without bubbles, and the adhesive dose in the coating is appropriate to prevent the paper from depowdering and hair shedding in the printing process. In addition, the absorption of xylene on coated paper should be appropriate The following is the detailed difference between coated paper and copperplate card: First, the characteristics of coated paper 1, molding mode: a molding 2, material: high quality raw materials 3, thickness: general 4. Paper surface. exquisite 5, dimensional stability: good 6,intensity:. A. Toughness: Average B.Internal combination: Good 7,the main use: album, packaging noodles Two, the characteristics of copper plate card 1, molding mode: a molding multiple molding together, generally three layers 2.Material: cheap fiber can be used in the middle 3,thickness: thick 4. Paper surface: slightly rough 5,dimensional stability: slightly poor 6, intensity. A. Toughness: High B. Internal bonding: easy to be layered 7,main use: packaging box, manual cover Product Description: Name: High Bulk art board Color: White Material: 100% Wood Pulp Substance,230gsm,250gsm,270gsm,300gsm,325gsm,350gsm,365gsm,400gsm,etc Size: 600*900mm, 700*1000mm,787*1092mm, 880*1194mm or width >600mm in roll size, etc. Features: 100% virgin pulp, High printing gloss, Smooth printing surface High gloss, Excellent brightness and smoothness Competitive stiffness and caliper , True color reproduction ISO 9001:2000,ISO14001:2004,SGS,FSC ARE ALL AVAILABLE Application Good quality business card,wedding card,invitation card,etc. Books Cover High class box like medicine box,cosmetics box,perfume box,shoe box,etc. Food packaging like tray,hamburger box,chicken box or other food packaging box. Product Packing Roll packing Wrapped with 3 layers strong PE coated craft liner paper. in case of paper damaged during the transit. Bulk sheets packing BOPP film wrapped, baled on strong wooden pallet, 4 angles be protected by carton board Ream packing 100 sheets wrapped by strong PE coated craft paper, baled on wooden pallets with 4 angle protectors
Features for the Husqvarna Z254F Ergonomic control panel The ergonomic control panel places everything conveniently at your fingertips. Removable foot plate The unique tube style chassis features a removable foot pan for easy access to the top of the cutting deck. Anti-slip foot area The footrest area incorporates generous non-slip surfaces for safe and comfortable use. Bumper The integrated front guard/ bumper offers bold styling while protecting the nose of the unit. An optional bright LED headlight kit can easily be added, providing improved visibility in dark conditions. Refinement Rubber bellows offer a refined look and prevent debris and moisture from entering the control system. Comfortable Seat The thick padded seat and soft outer cover offers superior support and comfort, while the open back gives added ventilation. Specifications Capacity Speed forward max: 6.5 mph Speed forward min: 0 mph Cutting deck Cutting width: 54in Cutting deck type: ClearCutâ?¢ - Fabricated Cutting methods: Collect/Mulch/Side discharge Cutting deck material: Steel Deck thickness: 10 gauge Cutting height steps: 6 Blade engagement: Electric clutch Clutch rating: 87 ft.lb Blades: 3 pcs Anti-scalp wheels: 6 Nose roller: No Deck lifting system: Manual, hand operated Powder-coated cutting deck: Yes Spindle/mandrel type: Cast iron Greaseable mandrels: Yes Deck Wash Port: Yes Cutting height, min-max: 1.5-4 in Dimensions Base machine, length: 75 in Base machine, height: 40 in Base machine, width (chute down): 67 in Base machine, width (chute up): 56 in Weight: 595 lbs. Tire size, front Width: 5 in Tire size, front Diameter: 11 in Tire size, front Diameter wheel: 6 in Drive System Transmission type: Hydrostatic Transmission manufacturer: Hydro-Gear Transmission manufacturer: Hydro-Gear Pump displacement: 10 cm�³ Fan-cooled pumps: Yes Engine Motor/engine manufacturer: Kawasaki Engine name: FR Series Power output: 24 hp Cylinder displacement: 726 cm�³ Cylinders: 2 Engine cooling: Air Air filter type: Auto-type Paper Power/fuel type: Gasoline Engine lubrication type: Full pressure with oil filter Oil filter: Yes Fuel tank volume (with reserve): 3.5 gal (US) Fuel tank location: Side (Single) Equipment Seat material: Vinyl Seat spring: Yes Seat back height: High Hour meter type: Digital with pre-programmed service intervals Cup holder: Yes Hinged armrests: Standard ROPS: No Seat type: Comfort high back
Our brewery systems are designed specially to meet unique and diverse brewing requirements. Whether small, middle or larger brewery you are going to build, our experienced and knowledgeable engineering team will create the most suitable solution, and make it come true by our quality craftsmanship. Configuration 2 vessel: Mash tun(M.T.)/Lauter tun(L.T.)+Kettle/Whirlpool(WHP) 3 vessel: Mash tun(M.T.)+Lauter tun (L.T.)+Kettle/Whirlpool(WHP) 4 vessel: Mash tun(M.T.)+Lauter tun (L.T.)+Kettle+Whirlpool(WHP) Hot Liquor Tank (HLT) Plate heat exchanger, 1 wort pump, for bigger brewhouse 1 additional HLT pump is necessary Controlling panel Integrated processing piping with valves&tri clamps for wort and hot liquor, CIP water. Platform with wort-checking table and stairway. PRT microbrewery system features Cost effective, Easy to operate, Save energy consumption.
Application Benchtop temperature chamber can meet certain quality standards and testing specifications ,for example: Daily necessities, cosmetics, electronic components, and medical products .� Most ideal designed for temperature and humidity testing of small samples and specimens used for research, development and quality control.� This dimension are very cute. customer can fit on a personal desk is the most consideration.If you need more models about our test equipment, please reference our chamber-testingï¼?.ï¼?com Feature: Our JOEO Benchtop Temperature Chamber's window is equipped with an anti-sweat electric heater device to prevent water vapor from condensing and water droplets, and high-brightness PL fluorescent lamps keep the interior of the box illuminated;Rectangular multi-layer glass viewing window, which can be used to observe the test items during the test.� With automatic-water supply system, it is convenient to supplement the water supply of the humidification barrel, and it can be recycled and used automatically. High-quality appearance, the body adopts an arc shape, the surface is treated with matte stripes, and the flat non-reaction handle is adopted, which is easy to operate, safe, and reliable. High quality original compressor circulation system adopts the French â??Tecumsehâ??& Germany "Bitzer" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerants (R23, R404, R507). Double-layer insulation of ess chamber door is tight and airtight, which can effectively isolate internal temperature leakage.� Built-in moving pulley is easy to move and place and has a strong positioning screw to fix the position. Controller has multi-segment program editing and temperature, and humidity can do fast (OUICK) or slope (SLOP) control. Self-developing controller system adopts an imported LCD screen, which can display the measured value, set value, and time at the same time. Announcements: Do not place the sample in the oven heating state, and place the sample in the state of ensuring that the heating is off;� When placing the sample, there should be a certain space around the upper and lower parts to keep the air flow in the box smooth; There is a cooling plate on the heating wire at the bottom of the chamber, and the sample can not be placed on it, so as not to affect the heat flow and lead to heat accumulation; If the sample will have a phase change at high temperature, it must be packed in a tray to avoid contaminating other samples (for example, it will leak oil or change from solid to liquid after heating); Containing flammable and explosive organic volatile solvents or auxiliaries shall not be put into the chamber.