China Hemispherical Head dished Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Magnesium Oxide boards (MGO board) are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panels load capacity meets the requirements of both residential and commercial structures. With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist. MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other. MgO board accepts any type of paint, wallpaper and tiling. Standard edges are square or tapered, special edges and sizes are available though. It may be cut, trimmed or shaped using ordinary power or hand tools. Features of mgo board: � Fire resistance � Water resistance � Mould and Mildew Resistance �Freeze/thaw cycling � Environmentally friendly characteristics (contains no asbestos, no toxic substances, lower carbon footprint than cement based products) � Easy to work with Technical Specifications PRODUCT SPECIFICATIONS Thickness(mm) Width(mm) Length(mm) Weight(kg) 3-20 1220 2440 10.7-62.5 3-20 915 2135 7.0-41.0 Notes: products can be produced according to customer specific requirements. BOARD TOLERANCE Thickness Length tolerance Width tolerance Thickness tolerance Edge straight Suface flatness (mm) (mm) (mm) (mm) (mm/m) (mm/m) 3-20 �3 �3 �0.2 �2 �2
ISO Tank container head using octahedral structure,Capacity increase 2000L-4000L.Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Magnesium Oxide boards (MGO board) are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panels load capacity meets the requirements of both residential and commercial structures. With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist. MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other. MgO board accepts any type of paint, wallpaper and tiling. Standard edges are square or tapered, special edges and sizes are available though. It may be cut, trimmed or shaped using ordinary power or hand tools. Features of mgo board: â?¢ Fire resistance â?¢ Water resistance â?¢ Mould and Mildew Resistance â?¢Freeze/thaw cycling â?¢ Environmentally friendly characteristics (contains no asbestos, no toxic substances, lower carbon footprint than cement based products) â?¢ Easy to work with Technical Specifications PRODUCT SPECIFICATIONS Thickness(mm) Width(mm) Length(mm) Weight(kg) 3-20 1220 2440 10.7-62.5 3-20 915 2135 7.0-41.0 Notes: products can be produced according to customer specific requirements. BOARD TOLERANCE Thickness Length tolerance Width tolerance Thickness tolerance Edge straight Suface flatness (mm) (mm) (mm) (mm) (mm/m) (mm/m) 3-20 ±3 ±3 ±0.2 â?¤2 â?¤2
Asme/ansi stainless steel dish head in gas condenser -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*thk 8 to 10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Water tank heads china-oil tank head-tank bottom -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from �325*thk 8 to �10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is �10000*50mm; the max size with integral stamping technology is �6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Reactor vessel head-tank head manufacturer -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from325*thk 8 to10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is10000*50mm; the max size with integral stamping technology is6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Mixing tank heads-a572gr50 asme -founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from �325*thk 8 to �10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is �10000*50mm; the max size with integral stamping technology is �6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
ASME Standard Pressure Vessel of Spherical Head ASME-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Carbon Steel Vessel Spherical Crown Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Dished boiler head-boiler head/end china-founded in 2000, dingjin general machinery co., ltd., specialized in the production of dished heads and pressure vessel plates, covering 74, 000 square meters which located in the beautiful costal city dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We possessed 3 sets of spinning units made in germany, self-made df10050, df 2220 and md21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from �325*thk 8 to �10000*thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in china. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (the maximum lifting capacity is 100 tons). Processing size of dish head(end): the max size with integral spinning technology is �10000*50mm; the max size with integral stamping technology is �6000*400mm; there is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: elliptical head china, hemispherical head china, dished heads china, conical head, customized dished ends, tank heads, china oem/odm dished end head.
Nickel alloy / Zirconium Crown dish head -Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, Tank heads, China OEM/ODM dished end head.
Pressure Vessel Conical End with Cladding Plate-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Separator Bottom Spherical Crown Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Hot Forming Crown Head for End Cap-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is Φ10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Spherical Dished Head for Boiler-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
China Hemispherical Head dished Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Elliptical Head China manufacturer-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
Elliptical Head China manufacturer-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from Φ325*Thk 8 to Φ10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is Φ6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.
China Hemispherical Head dished Head-Founded in 2000, Dingjin General Machinery Co., Ltd., specialized in the production of dished heads and pressure Vessel plates,covering 74, 000 square meters which located in the beautiful costal city Dalian. The registered capital is $ 3, 065, 000, total assets are $2, 857, 000. We Possessed 3 sets of spinning units made in Germany, self-made DF10050,DF 2220 and MD21/5030. It can form different shapes and specifications of dish heads with integral technology ranging from 325*Thk 8 to 10000*Thk50. Dingjin possesses 7 sets of hydraulic presses, 2 sets are of 1000 tonnage, 1 set is of 2000 tonnage, 1 set is of 8000 tonnage, 1 set is of 16000 tonnage which are dual action made by us. The rest 2000 tonnage and 630 tonnage dual action hydraulic presses were purchased in China. We possesses complete matching equipment, involving 7 sets of heat furnace, 28 sets of crane (The maximum lifting capacity is 100 tons). Processing size of Dish head(end): the max size with integral spinning technology is 10000*50mm; the max size with integral stamping technology is 6000*400mm; There is no limitation for diameter when made the dish head (end)with many petals, the maximum thickness could be up to 300mm. Main products: Elliptical Head China, Hemispherical Head China, dished heads China, Conical Head, Customized dished ends, China OEM/ODM dished end head.