1. Application: It's good at cutting Amorphous alloy cores, Nanocrystalline Magnetic Alloys, Super microcrystalline cores, Silicon steel cores, Ferrite cores, Silicon and nickel cores, Permalloy and Air gap cutting. 2. Features: (1). X-axis and Y-axis both use a servo motor, Z-axis use a common motor. (2). If the sliding door is open, the machine can't run. (3). Easy to operate and understand. (4). Openable hood design, convenient for cleaning and maintenance. (6). Multi-tier filtering system
Rectangular corner bellow bending machine is used to bend square bellow corner.
SG100 series of light-Duty CNC wire mesh weaving machine is suitable for weaving high quality fine mesh. It has many kind of characters like high precision, fast rotation speed and low noise , wide weaving range and various mesh weaving patterns. It can weave different kind of wire mesh in different material , like stainless steel, iron, copper, brass, phosphor copper, aluminum, silver, platinum and so on. Weaving width: 1000mm, 1300mm, 1600mm, 2000mm. Wire diameter range: 0.03-0.3mm Weaving density: plain weave square hole 40-400 mesh / inch, twill weave 600 mesh / inch, dutch weave 3600 mesh / inch (weft direction). Speed: 100 (120 optional) RPM stepless speed regulation, the actual speed depends on the weaving width and detailed specifications. Shedding form: Tappet arch heald, rotating electronic dobby, servo dobby or equipped with jacquard machine. Heald frame and form: optional 2-20 pieces of aluminum alloy heald frame. Basic tension: 15000 N/m
SG180 series of large CNC metal wire mesh weaving machine is suitable for weaving heavier metal mesh fabric. It adopts flexible rapier linear weft insertion .There are two kinds of beating up forms :single beat /pick and double beat/pick and two kinds of shedding opening structures which can be selected: tappet hanging/harness heald and servo dobby. It is with the character: Mesh winding and let -off automatic numerical control and automatic adjust mesh tension. It can weave metal wire mesh ,like stainless steel, iron, copper, aluminum,alloy, polyester and other non metal wire mesh . Weaving width: 1300mm,1600mm, 2000mm, 2500mm, 3000mm, 3500mm, 4000mm Wire diameter range: 0.2-1.0mm or 1.0-2.1mm (optional) Weaving density: plain weave square hole 6-60 or 2-40 mesh / inch, twill weave 260 mesh / inch. Speed: 35-50 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications. Heald frame and form: two kinds of structures are optional -Tappet hanging/harness heald and servo dobby and 2-8 pieces of aluminum alloy heald frame or steel heald frame (optional) Basic tension: 60000 N/m.
SG160 series of heavy duty CNC metal wire mesh weaving machine is developed by our own company. It is suitable for weaving heavier metal mesh fabric. It adopts flexible rapier linear weft insertion with the characters of small opening and flat mesh surface. There are two kinds of beating up forms :single beat /pick and double beat/pick and many kinds of shedding opening structures which can be selected, like tappet hanging/harness heald, arch heald and servo dobby, etc .And it is with numerical control mesh winding, numerical control let -off and automatic adjustment of mesh tension. It can weave stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, FeCrAL, polyester, plastic and all other materials of wire mesh. Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm,3000mm Wire diameter range: 0.1-0.7mm Weaving density: plain weave square hole 10-100 mesh / inch, twill weave 350 mesh / inch Speed: 50-70 turns/minute, RPM stepless speed regulation,the actual speed depends on the weaving width and detailed specifications. Heald frame and form: three kinds of structures are optional -Tappet hanging/harness heald, arch heald, servo dobby and 2-8 pieces of aluminum alloy heald frame or steel heald frame (optional) Basic tension: 40000 N/m
SG130 Series Standard CNC metal wire mesh weaving machine is a kind of general use machine. The high performance servo drive, weft insertion mechanism, various shedding devices (electric rotation dobby, cam opening or external jacquard,etc.), coordinating with high steel rigidity beating-up mechanism, large touch screen make it easy and flexible to operate and has characteristics such as wide weaving range, high-precision, low noise, diverse patterns and easy to maintenance. It can weave different metal wires such as: stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, and other non-metal wires such as polyester, plastic, etc. Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm Wire diameter range: 0.06-0.45mmmm Weaving density: plain weave square hole 20-260 mesh / inch, twill weave 400 mesh / inch Speed: 120 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications. Heald frame and form: three type available -Tappet arch heald, rotating electronic dobby and servo dobby . And 2-20 pieces of aluminum alloy heald frame (optional). Basic tension: 20000 N/m.
SG130 Series Standard CNC metal wire mesh weaving machine is a kind of general use machine. The high performance servo drive, weft insertion mechanism, various shedding devices (electric rotation dobby, cam opening or external jacquard,etc.), coordinating with high steel rigidity beating-up mechanism, large touch screen make it easy and flexible to operate and has characteristics such as wide weaving range, high-precision, low noise, diverse patterns and easy to maintenance. It can weave different metal wires such as: stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, and other non-metal wires such as polyester, plastic, etc. Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm Wire diameter range: 0.06-0.45mmmm Weaving density: plain weave square hole 20-260 mesh / inch, twill weave 400 mesh / inch Speed: 120 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications. Heald frame and form: three type available -Tappet arch heald, rotating electronic dobby and servo dobby . And 2-20 pieces of aluminum alloy heald frame (optional). Basic tension: 20000 N/m.
Input voltage: 220V Motor power: 500W Spindle speed: 40000 r / min Overall dimensions: 60 * 70 * 150cm Weight: 180kg Function: Dongtai ultrasonic gem machine production of computer engraving machine using imported screw, die spindle motor, the machine in the use of the process, high precision, fast, not prone to failure. The machine is convenient for producing all kinds of precious stones products. Configuration of the standard knife, in the machine production process occurs when the knife, you can knife, the use of a high degree of uniform tool, two carving height of the same, the product will not have a break, complete the joint, to solve the difficulty of the product knife.
CNC Machine Spindle Through Coolant Rotary Union
APPLICABLE INDUSTRY: This machine is mainly used for drilling plates, flanges, discs, rings. Drilling through hole and blind hole can be realized on single materials and composite materials.It is also used for joint plates in building, bridge, iron tower, etc. FEATURESï¼? 1. Guide screw all protection, not exposed; 2. Plate chain automatic chip exhauster and circulating cooling device 3. Automatic lubrication device and protective device, all moving (rotating) parts automatic regular lubrication; 4. Power head and gantry drilling hydraulic clamping, do not shake; 5. Stainless steel fence around the worktable, no rust; 6. Longmen beam and column widened and welded steel plate, good rigidity. 7. Full digital CNC control system: - Chip breaking function, - With the function of knife lifting and chip removal, - Provide software for automatic conversion of CAD graphics into machining programs, - Realize CAD graphics automatic conversion into processing program function, - With the function of adjusting feed and speed according to different aperture, - The standard CNC system adopts Siemens CNC system, equipped with USB interface and LCD display screen.Operation interface has man-machine dialogue, error compensation, automatic alarm and other functions. - It has the function of hole preview and recheck before processing.
Cnc Welding Wire Machine
8ft Heavy Duty Servo Veneer Lathe for Face Veneer 0.2 mm Technical Specification: Model No BX2600A Max Peeling Length 2600mm Max Peeling Diameter 400mm Left Log Core Diameter 28mm Peeling Thickness 0.2-3.0mm Peeling Speed 42m/min Roller Motors 7.5kw x 4 sets Feeding Motor 11kw Servo Motor x 1 set Control System 15kw Servo Drive Dimension 5600x2200x1800mm Weight 12000 kg Key Features: 1. Heavy Duty: The weight of this veneer lathe is up to 12000 kg,much heavier than other model of machines,so the machines runs very stable,and the peeling precision will be very good ,and this makes it suitable for peeling all kinds of hardwood logs 2. Servo System: This veneer lathe is equipped with 11kw Servo motor and 15kw Servo Drive Inverter,the control precision is much better than normal motor and normal inverters 3.Wide Thickness Range: This veneer lathe can peel thin as 0.2mm  and as thick as 3.0mm,one machine will meet your demand for peeling  different kinds of veneer,core veneer and face veneer peeled in one machine. 4. Double Slide-way System: It has double sliding way system supporting the knife table,at the two ends are the surface slide system,and in the middle are the dove tail slide system supporting , so the knife table runs smoothly and stably,which will make the veneer very beautiful . 5.High Rigidity Rollers: Rollers are quenched and chrome plated, rigidity is better and harder , service life longer . 6.Bearings Well Sealed :All bearings are attached with seals , which makes the bearings better lubricated and can be used for longer time . 7.Popular in India and Indonesia: we have agent in India and Indonesia, they are selling this model in their countries and the selling is very good,customers think highly of this machine because of its good veneer quality and good machine performance .  Hot sale various high quality wood veneer rotary equipment from china leading manufacturer. Our products are cost effective Welcome to choose us!
Manufacturer 4axis wood pattern cnc router carving cutting machine 1.Structural stability: heavy steel bed, solid deformation. 2.Good parts: Adopt Taiwan linear guide AMT, double four ball slider, loading capacity of large, stable operation; German ball screw, the knife accurate; brand spindle motor. 3. Drive more robust: the use of advanced well-known brand stepper motor, more powerful. 4. Rational design: the use of advanced dual-Y axis drive gear shaft gear, fast, powerful. 5. Easy to operate: the use of advanced Ncstdio type USB interface to handle the operating system completely offline, do not take up computer resources.
APC Series precision metal stamping press adopts a multi-direction motion system, in which connecting rods are installed between double cranks and these rods are used to bear the load from two wide operation centers-ram and bolster. These designs help to prevent forward tilt- the direct cause to produce deviation. in this way, stamping's high-precision and small vibration could be well guaranteed, Therefore, the stamping press is quite suitable for multi-station precision pressing. Features: 1. With High rigidity rack design, they are welded with the use of high-quality steel plates, through relieving stresses,so that stability and reliability and of the whole machine in precision are enhanced. 2. Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design. 3. In order to guarantee relative stationarity of machine operation, it is necessary to balancers. 4. Moulding-adjustment precision is as high as 0.1mm, safe,speedy ,and reliable . 5. Through hard oxidation and grinding ,such parts as bent axles,gear sets,and connecting rods possess higher combination property and tolerance. 6. Adopt highly sensitive and reliable clutch/brake and internationally top duplex,to guarantee precision an operation and stop of press 7. Machine's structural design shall be reasonable,for the convenience of realizing automatic production,red and improving 8. Possess advanced design concepts, low noise, low consumption, and energy
The presses precision of APF series stamping presses arrives to class 1-jis (Japannese industrial standards), which is suitable for progessive die stamping in high precision. Features: Mix European, American and Japanese advanced technologies/functional structure CAE dynamic si optimization design. High rigidity lathe bed high quality steel profiling welding or In-block casting part tempering/vibration stress processing. High standard fabrication processing of such key parts as gears and bent axis through hard chrome plating/nitriding/grinding. Such high level configurations as high performance controllers /drive parts /electromagnetic clutches/steam-driven elements and bearings. Technical grade if international stamping equipment and inspection of machine index. High memory module/individual design franchised software compilation. High compatibility multi axial variable speed drive/automation equipment onboard expansion. High intelligent human-computer interface/high frequency real-time control/Ethernet & USB interface. Standard configuration: >Hydraulic overload protector >Electric slider adjusting device >Digital moulding-height indicator(unit:0.1mm) >Slider and mould balancing device >Rotary cam switch >Crank angle indicator >Circulation centralization lubrication oil feeding device >Over-run safety device >Programmable controller >Indepence electric control cabinet >Maintenance tool and tool box Optional configuration >Die backer >Upper slider feeding device >Die light >Main motor inversion device >Photo-electric safety device >Safety groove and safety pin >Pre-determined counter(6 digits) >Loading inspection device >Missfeed detection consent >Frequency conveter >Basic bolt and soleplate >Anti-vibration foot >Safety shelf and safety ladder >Power socket >Quick die change device
APE series precision metal stamping press has a high precision of 0.1mm, an it features easy operation and reliable performance. Therefore, it is quite suiable in cutting, punching, bending and other machining for diverse metal plates, These metal plates could be used to produce motor casing, automobiles parts, home appliance, computer cases, recording machine, power supply unit's bottom mounts and etc.
Double crank metal stamping press can be used to stamp heavy metal with large thickness, such as parts of motorcycle and bicycle,automatic equipment of home appliance. Feature: Octahedral guiding of slider and long guide fail can guarantee operation precision. Hydraulic overload protection device and overload automatic emergency cut off can protect safety of press machine and mould, with convenient application.. PLC electric interlocking control possesses sudden-stop, inch, single pass and continuous operation specifications. Dry pneumatic friction clutch is small in noise, large in clutching torque, small in braking angle and convenient in maintenance. Body is closed structure, including beams,, stand columns, and bases, which is strained with four tie bolts, with good rigidity(400-600). Standard Configuration: >VS variable-speed motor >Hydraulic overload protector >Electric slider adjusting device >Indepence electrical control cabinet >Movable working table >Digital moulding-height indicator (Unit:0.1mm) >Electric butter lubricating device >Power socekt >Over-run satety device >Misfeed detaction consent >Pre-determinned counter(6 digits) >Air-blast device 1/2" primary circuit >Air source conector 1/2" secondary circuit Optional configuration: >Die backer device >Photo-electric safety device >Feeding device on the slider >Safety dog and safety latch >Anti-vibration footstand device >Die area lighting >Quick die change device >Movable working table >Frequency converter >Automatic feeding system
BT40-ER25-100L ER Collet Chuck CNC Machine Tool Holder BT40 type ER 25 collet chuck are mainly used for CNC machine system, which wit an ultra precision. ChongDe is a manufacture in R&D,production,sales and services with ISO9001 certificate.The main products are precision tool holder,clamping collet,pull stud,nut,spanner and other machine tool accessories with the standards of ISO,DIN,ANSI/ASME,JIS and local GB,etc. Attaching importance to the research and products,we employs many experienced and skilled technicians,so that precision machining can be made according to samples or drawings. Product Features 1. Works on all BT40 machines 2. Run out of the inside shank cone 0.002mm 3. Rear thread for pull stud is M16*2.0P. 4. Collet Chuck accepts all ER25 collets 5. Nickel coating surface, Anti-rust, anti-corrosion, durability better. 6. Tool Holder is Balanced to G2.5 at 20,000 rpm 7. Constructed of alloy steel hardened to 56 - 60 HRC for long, durable service life 8. AT3 or better accuracy standard taper specification for maximum contact with spindle.
Shining Jins Enterprise Co., Ltd. specializes in providing a wide range of custom commercial cold-forgings for various industries. We produce all parts to our customerâ??s exact specifications and drawings.
Shining Jins Enterprise Co., Ltd. a leader & innovator in the cold-forging industry, is an ISO certified manufacturer and supplier of standard and special products manufactured using various methods including but not limited to cold forging, cold heading, automatic screw machine, CNC machine and stampings.
