Model Number Electric Motor Scrap Grade HMS Material Electric Motor Type Electronic Shape Lump Product name Used Electric Motor Scrap Material All Kinds of Electric Motor Al Content (%) 99% Copper Per Motor 2 - 3 Kg per piece Size 5kg to 25kg Alloy Or Not Non-alloy Application Corrosion Resistance Features High Tensile Strength Quality Clean Condition Working/ Non Working
Alternator Motor Scrap
Stepper motor, stepper motor driver.
Specification for Scrap Electrical Motor General Description: The scrap electrical motor shall be an industrial or commercial-grade electric motor that is no longer operational or intended for reuse in its current state. Physical Characteristics: Dimensions: Provide approximate dimensions (length, width, height) of the motor. Weight: Specify the weight range of the motor. Appearance: Describe the external condition (e.g., rust, wear, intact casing). Electrical Specifications: Voltage Rating: Indicate the nominal voltage rating of the motor. Power Rating: Specify the power output in horsepower (HP) or kilowatts (kW). Phase: State whether the motor is single-phase or three-phase. Frequency: Specify the operating frequency (e.g., 50 Hz or 60 Hz). Mechanical Specifications: Type: Describe the type of motor (e.g., induction motor, synchronous motor). Enclosure: Specify the type of motor enclosure (e.g., open, totally enclosed). Shaft: Detail the condition and specifications of the motor shaft (e.g., diameter, keyway). Operational Condition: Functionality: Clarify whether the motor is inoperable or partially functional. Defects: Note any known defects or issues affecting operation. Environmental Considerations: Hazardous Materials: Identify any hazardous materials present (e.g., oil, heavy metals) and their safe handling requirements. Disposal Requirements: Specify disposal guidelines in accordance with local regulations. Packaging and Transportation: Packaging: Describe how the motor will be packaged for transport (e.g., palletized, boxed). Transportation: Provide guidelines for safe handling during transportation (e.g., lifting points, weight limits). Documentation: Certificates and Documentation: Include any certificates or documentation related to the motor's original specifications or hazardous material content. Additional Information: Purpose: State the intended use of the scrap motor (e.g., recycling, parts salvage). Availability: Specify quantity and availability of the scrap motors. Compliance: Regulatory Compliance: Ensure compliance with relevant safety and environmental regulations. Notes: This specification is intended to provide a comprehensive overview of the scrap electrical motor's characteristics and condition. It should be used to accurately assess the motor's suitability for recycling or other intended purposes. Any additional specific requirements should be clearly outlined based on the intended use and local regulatory requirements.
Stepper motor.
Stepper motor.
Stepper motor, and stepper motor driver.
Stepper motor.
Stepper motor.
Stepper motor.Shipment by sea, air, train, truck
Stepper motor, stepper driver.
Preferred Density Range : 18 to 25kg/ m3 Clean & Dry Unused Off-Cuts : 100% Color : Mixed Foam Skins : None Rebonded Foam : None Bare Skins : None Ester-type Foam : None Hydrophilic Foam : None Laminated Fabric/Foam : None Laminated Vinyl/PVC/Foam : None Reticulated Foam - None Visco-elastic Foam : None Foreign Matter/Contamination : Absolutely None Factory Sweepings : Absolutely None Recycled, Old or Used Foam : Absolutely None Packaging : In compressed by bales Weight: 250 to 300kgs per bale Loading Quantity : 40 High Cube containers can loaded no less than 18,000kgs
Item T1011N 1. Rated Voltage (V) DC 5 2. Rated Current/Phase (mA/RMS) 111 3. Coil DC Resistance (Ohm) 45 10% 4. Step Angle (Degree) 18 5. Drive Mode Constant Voltage 6. Excitation Method 2-2 Phase excitation(Bipolar driving) 7. Insulation Class Class E 8. Pull-out Torque (g-cm/pps) 5.9/500 9. Pull-in Torque (g-cm/pps) 5.6 /500 10. Max. Pull-out Pulse Rate (pps) 1310 11. Max. Pull-in Pulse Rate (pps) 1160
ALPHA5000 frequency inverter is an economical product, also adopt special magnetic flux vector control, with the same functions and performance of ALPHA6000. But ALPHA5000 use economical design plan. The size is smaller. It's widely accepted by the customers with sample requirements for inverters. Technical Feature: 1. Special magnetic flux vector control 2. Low frequent high start torque: 0.5Hz/150% 3. Built-in braking unit 4. Use 32 bit high speed CPU special for motor control 5. Simple PLC multi-step control function 6. Built-in PID to realize close-loop control 7. Dynamic torque current control, rapid response load's change 8. Simple servo fixed-length control function 9. Wobble frequency control special for spinning 10. Load distribution control function 11. Special speed tracking function without impact 12. Online modify and check parameters 13. Offer RS485, support MODBUS-RTU communication protocol 14. Rich fault protection and operation monitoring function 15. Multiple programmable multi-function input/output terminals Application: Fan & pump, CNC machine, Metal, Glass, Packaging, Plastic machining, Petrochemical, Chemical fiber, Paper & printing, Textile printing. Carton or wooden packaging.
Stepper motor, stepper motor driver, brushless motor.
Stepper motor, linear stepper motor and motor driver.
OSM's Linear Actuator product line ranges from the smallest NEMA 8 Linear Actuator with delivers thrust of 10 lbs (4.5 Kg), to the largest NEMA 23 Linear Actuator with delivers thrust of 200 lbs(90 Kg), These Linear Actuators are based on High torque Stepper Motor. Such as Nema 8 Stepper motor, Nema 11 Stepper motor, Nema 14 Stepper Motor, Nema 16 Stepper Motor, Nema 17 Stepper Motor and Nema 23 Stepper Motor. Three designs are available, captive, non-captive and external linear versions. We can customize the winding to perfectly match your voltage, current, and maximum operating speed. Special lead screw modifications, cables and connectors are also available upon request.
Stepper motors, hb stepper motors, pm stepper motors.
Features: Model: 86blf01; 86blf02; 86blf03; 86blf04 Number of poles: 8 Number of phases: 3 Nominal voltage vdc: 48 Rated speed rpm: 3000 Continuous torque n-m: 0.35~1.4 Output power watts: 110~440 Peak torque1 n-m: 1.05~4.2 Peak current amps: 10.8~38.0 Line to line resistance ohms: 0.47~3.2 Line to line inductance mh: 0.71~2.1 Torque constant n-m/amps: 0.11~0.115 Back emf v/krpm: 11.5~12.0 Rotor inertia gòcm2: 350~1250 Body length (l) mm: 57~94 Mass kg: 1.1~2.75
Features: Modelú¦ 17hm201ú+ 17hm206ú+ 17hm208ú+ 17hm602ú+ 17hm604ú+ 17hm607ú+ 17hm805ú+ 17hm809ú+ 17hm810 Step angel ( íp): 0.9 Motor length l(mm): 34~48 Rate voltage (v): 2.4~11.2 Rate current (a): 0.4~2.4 Phase resistance ( ª+ ): 1~28 Phase inductance (mh): 1.8~30 Holding torque (g.Cm): 1400~4800 Lead wire (no.): 4/6 Rotor inertia (g. C¬o): 34~68 Detent torque (g.Cm): 180~260 Motor weight (kg): 0.2~0.34
