Solar Power System Suppliers and Manufacturers

EXCELLENT PERFORMANCE Maximum efficiency 98.0%, battery efficiency 94.5% Maximum 15kW PV input power, continuously 10% output overload Maximum Charge/Discharge current 210A Large MPPT current, compatible with high-power solar panels Advanced parallel function     HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, AFCI, RSD     Max. Efficiency (PV to AC) 98.00% 98.00% Max. Efficiency (BAT to AC) 94.50% 94.50% CEC Efficiency 97% Input (PV) Max. PV Input Power 12,000W 15,000W 12,000W 15,000W 600V Ã? Max. PV Voltage 600v Start-up Voltage 90V MPPT Voltage Range 70V-S40V Max. Input Current 30A/22A/22A Max. Short Circuit Current 40A/30A/30A Nos. of MPPT 3 String per MPPT 2/2/2002 Input/Output (BAT) Battery Type Lithium-ion, Lead-acid Nominal Battery Voltage 48V Ã? Battery Voltage Range 40V-64V Max. Charge/Discharge Current 210A/180A 210A/210A 210A/180A 210A/210A Max. Charge/Discharge Power 0,0ooW/8,000W 10,000W/10,000W 10,000W/8,000W 10,000W/10,000W Output (Grid) Nominal AC Output Power 8,000W 10,000W 8,000W 10,000W Max. AC Apparent Power 8,800VA 11,000VA 8,800VA 1,000VA Max. AC Output Power (PF=1) 8,800W 11,000W 8,800W 11,000W Max. AC Output Current 40A Ã? SOA 40A SOA Rated Grid voltage 120/240V (Split Phase) / 230V (Single Phase) / 208V (2/3 Phase) 220V/230/240V, L+N+PE Grid Voltage Range 150-300V(Adjustable) Rated Grid frequency 60Hz 50Hz/60Hz Grid Frequency Range 55Hz-65Hz (Adjustable) 45Hz-55Hz/55Hz-65Hz (Adjustable) Power Factor 0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) THDI <3% (Rated Power) Output (Back up) Nominal Output Power 8,000W 10,000W 8,000W 10,000W Nominal Output Current 33.4A 41.7A 34.8A 43.SA Peak Power (1s) 16,000VA 20,000VA 16,000VA 20,000VA Nominal Output Voltage 120/240V(Splitphase)/230V(SirgIephase)/]08V(2/3phase) 220V/230V/240V, L+N+PE Nominal Output Frequency 60Hz 50Hz/60Hz Transfer Time 10ms <10ms THDV <3% @100% R Load Protection Protection Category Class I Class I DC Switch Yes Yes Anti-islanding Protection Yes Yes AC Over Current Protection Yes Yes AC Over Voltage Protection Yes Yes AC Short Circuit Protection Yes Yes DC Reverse Protection Yes Yes Surge Arrester DC Type II, AC Type II DC Type II, AC Type II Insulation Detection Yes PV Insulation Detection Yes Leakage Current Protection Yes Yes AFCI Yes Optional RSD Support (MLRSD Sunspec) Optional General Max. Operation Altitude 2000m 4000m(>2000m derating) Protection Degree IP65 Operating Temperature Range -25Ã?°C-60 %(>45 % derating) Relative Humidity 0-100% Cooling Fan Cooling Mounting Wall bracket Dimensions (W*H*D) 420mm*800mm*240mm Weight 37Kg PV Connection Terminals HMI & COM Display LED+APP, LCD(Optional) Communication Interface RS485/CAN (for BMS), DRM/RS485 (for Meter), RS485 Optional: Wi-Fi/GPRS/LAN Certification Grid iEEE1547: 2018, HECO SRD 2.0 IEC61727/62116,AS 4777.2,NRS 097-2-1 Safety csA C22.2 IEC 62109-1&2 EMC FCC Part 15 Class B EN61000 Warranty 5 Years  

EXCELLENT PERFORMANCE Maximum efficiency 98.4%, battery efficiency 98% Maximum 15kW PV input power, continuously 10% output overload, 150% unbalance output Maximum Charge/Discharge current SOA Large MPPT current, compatible with high-power solar panels Advanced parallel function   HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, optional AFCI, RSD     Max. Efficiency (PV to AC) 98.20% 98.40% 98.20% 98.40% Euro. Efficiency (PV to AC) 97.20% 97.90% 97.90% Max. Efficiency (BAT to AC) 98.00% 98% Input(PV) Max. PV Input Power 9,000W 1OOOV 15,000W 30000W 1000V 45000W Max. PV Voltage 150V 150V Start-up Voltage 160V-950V 160V-950V MPPT Voltage Range Max. Input Current 15A/15A 20A/30A 30A/30A 30A/30A/30A Max. Short Circuit Current 20A/20A 3 30A/40A 40A/40A 40A/40A/40A Nos. of MPPT 2 3 String per MPPT 1-Jan 1/2/2023 2-Feb 2/2/2002 Input/Output (BAT) 8 9 Battery Type Lithium-ion, Lead-acid Lith umion/Leadacid Nominal Battery Voltage 250V-600V 420V-800V 320V-800V Battery Voltage Range 150V-600V 150V-800V Max. Charge/Discharge Current 25A/25A 50A/50A 50A/50A 2*50A/2*50A Max. Charge/Discharge Power 9,ooow/5,800W 15,000W/11,300W 24,000W/ 22,680W 30,000/ 34,000W Output (Grid) Nominal AC Output Power 5,000W 10,000W 20,000W 30,000W Max. AC Apparent Power 5,500VA 11,000VA 22,000W 33,000W Max. AC Output Power (PF=1) 5,500W 11,000W 22,000VA 33,000VA Max. AC Output Current 3*8.3A 3*16.7A 3*33.4A 3*50.1A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000W Max. Input Power 15,000VA 30,000VA 4S,000VA Max. Input Current 3*25A 3*50A 3*75A Rated Grid Voltage 380V/400V/415V,3W+N+PE 380V/400V/415V,3W+N+PE Grid Voltage Range 260V-520V (Adjustable) 277V-520V (Adjustable) Rated Grid Frequency 50Hz/60Hz 50Hz/60Hz Grid Frequency Range 45Hz-55Hz/55Hz-65Hz (Adjustable) 45HZ-55Hz/55Hz-65Hz (Adjustable) Power factor >Ã?  0.99 grated power (Adjustable 0.8 LD - 0.8 LG) >Ã? Ã?  0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) THDI <5% (Rated Power) <3% (Rated Power) Output (Back up) Nominal Output Power 5,000W 10,000W 20,000W 30,000W Nominal Output Current 3*7.6A 3*15.2A 3*30.3A 3*45.5A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000kW Peak Power (Smin) 6,000VA 12,000VA 24,000VA 36,000VA Peak Power (10s) 7,500VA 15,000VA 30,000VA 4S,000VA Nominal Output Voltage 380V/400V/41 IV, 3W+N+PE 380V/400V, 3W+N+PE Nominal Output Frequency 50Hz/60Hz 50Hz/60Hz Transfer Time 1Oms 1Oms (typical) THDV <3% (R Load) <3 (R Load) Protection Protection Category Class I DC Switch Yes Anti-islanding Protection Yes AC Over Current Protection Yes AC Over Voltage Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type II, AC Type II PV Insulation Detection Yes Leakage Current Protection Yes AFCI Optional RSD Optional General Max. Operation Altitude 4000m (>2000m derating) 4000m (>2000m derating) Protection Degree IP65 IP66 Operating Temperature Range -25Ã?°C -60â??C (>45Ã?°C derating) -25 % -60 % (>45 % derating) Relative Humidity 0-100% 0-100% Cooling Natural Cooling Natural Cooling Smart Fan Cooling Mounting Wall bracket Wall bracket Dimensions (W*H*D) 530mm*550mm*212mm 660mm*570mm*230mm Weight 30Kg 32Kg 45Kg 55Kg PV Connection MC4/H4 MC4/H4 HMI & COM Display LED+APP, LCD(Optional) Communication Interface S485/CAN (for BMS), RS485, RS48S (for Meter), DRMs, 2â??DI (1 for RMO), 2â??DO, Optional: Wi-Fi/GPRS/LAN Certification Grid VDE-AR-N4105, IEC 61727/62116, AS 4777.2, EN 50549-1, C10/11, G99, CEI 0-21, NRS 097-2-1, RD 1699/661/413 Safety iEc 62109-1 &2 EMC EN 61000 Warranty S Years

FEATURES Easy Installation Slim &modern design Advanced BMS control Parallel capacity up to 160 kWh Black out and emergency back-up Self-heating for low ambient temperatures (optional) Remote monitoring with over-the-air updates (optional) Compatible with wide range of inverters   Rated Capacity Rated Voltage 100 Ah 200 Ah V Rated Energy 5.12 kWh 10.24 kWh Max.Parallel Quantity 32 Sets in Parallel, 163.84 kWhÃ? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã?  16 Sets in Parallel, 163.48 kWh Rated Charging / Discharging Current 0.6C , 60 0.6C , 120 A Max. Discharge Continuos Current 1C , 100 A at > 70% SOC   0.6C , 120 A Battery Max. Charge / Discharge Power 3.07 kW / 5.12 kW 6.14 kW / 6.14 kW Peak Discharge Current / Power 105A / 5.37 kW ,1min.   160 A / 8.19 kW , 1 min. Available SOC Range 0% 100% , 90% DOD is recommended Dimensions 460*165*652 mmÃ? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã? Ã?  550*165*869 mm Weight -50 kg (to be confirmed)   -94 kg (to be confirmed) Operating Temperature Charging Temperature : -5 C-55 % Discharging Temperature : -15 % -55C Storage Temperature -15 C -  55 % Working Humidity 5 - 95% RH (Non-Condensing) Altitude 2000 m / 6562 ft Communication CAN / RS485 / Dry Contact / WiFi (WiFi stick Optional) Certification TUV / IEC 62619/ IEC 62040/ IEC 61000/ RoHS / REACH Cycle Life Warranty ip Rating 6000 10 Years Limited Warranty IP65

SUPERIOR PERFORMANCE Maximum efficiency of 98.4% Large string current, compatible with large PV modules Wide voltage range, compatible with various power grids Ã?° Compact for easy installation   HIGH RELIABILITY IP66 protection level for outdoor installation Optional: DC/ACType II SPD Optional: AFCI function     INTELLIGENT MAINTENANCE Power generating monitoring Remote configuration and upgrade Quick commissioning via mobile app Multiple I/O and communication configurations     European Efficiency 97.80% 98.00% Input(PV) Max. Input Voltage 1100V Max. PV Configuration 150% Rated Input Voltage 620V Max. Input Current 15A+30A 2*30A 40A/30A Max.Short Circuit Current 20A+40A 2*40A 50A/37.5A Start Input Voltage 180V MPPT Operating Voltage Range 160V-1000V Max. Number of PV Strings 3(1/2) 4(2/2) No. of MPPTs 2 Output(Grid) Rated AC Active Power 10,000W 20,000W 30,000W Max. AC Apparent Power 11,000VA 22,000VA 33,000VA Max. AC Output Current 3â??16.8A 3*33.7A 3*50.2A Rated AC Voltage 380V/ 400V/ 415V, 3W+L+PE AC Voltage Ranged 260V-510V (Adjustable) Rated Grid Frequency 50Hz / 60Hz Grid Frequency Ranged 45Hz-55Hz / 55Hz-65Hz (Adjustable) THDI <3%Ã?  @Rated Power DC Current Injection <0.5%@Rated Power Power Factor >0.99 Rated power (Adjustable 0.8 LD-0.8 LG) Protection DC Switch Yes Anti-lslanding Protection Yes AC Overcurrent Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type III(Type II optional) / AC Type III(Type II optional) Insulation Detection Yes Leakage Current Protection Yes General Topology Transformerless IP Rating IP66 Night Self Consumption <1W Cooling Natural cooling Fan cooling Operating Temperature Range -25 â??C -60â??C Relative Humidity Range 0â??100% Max. Operating Altitude 4000m Dimensions (W*H*D) 398mm^460mmâ??190mm Weight 18.7Kg 20.1 Kg 0.1 Kg HMI & COM Display Wireless & APP+LED, LCD (Optional) Communication RS485, Optional: WiFi / GPRS / LAN Certification Safety IEC62109-1, IEC62109-2 Grid Code VDE-AR-N 4105, EN 50549-1, CEI 0-21, UNE 206006/206007-1 RD 1699/661&413, IEC 61727/62116, AS4777.2

  SUPERIOR PERFORMANCE Maximum efficiency of 5% Large string current, compatible with large PV modules HIGH RELIABILITY IP66 protection level for outdoor installation DC/AC Type II SPD Optional: AFCI, Night SVG, and integrated PID INTELLIGENT MAINTENANCE Power generating monitoring Remote configuration and upgrade Quick commissioning via mobile app String level current detection(Optional)     Max. Efficiency 98.50% European Efficiency 98.00% 97.90% Input(PV) Max. Input Voltage 1100V Max. PV Configuration 150% Rated Input Voltage 620V Max. Input Current 40A+2*32A 40A+3*32A Max.Short Circuit Current 50A+2*45A 50A+3*45A Start Input Voltage 200V MPPT Operating Voltage Range Max. Number of PV Strings 180V-1000V 2/2/2002 2/2/2/2 No. of MPPTs 3 4 Output(Grid) Rated AC Active Power 40,000W 50,000W Max. AC Apparent Power 44,500VA 55,600VA Max. AC Output Current 67.4A 84.2A Rated AC Voltage 380V/400V/415V,3W+L+PE or 3W+PE AC Voltage Ranged 320V-520V (Adjustable) Rated Grid Frequency 50Hz / 60Hz Grid Frequency Ranged 45Hz-55Hz / 55Hz-65Hz (Adjustable) THDI <3% (Rated Power) DC Current Injection <0.5%In Power Factor >0.99 Rated power (Adjustable 0.8 LD-0.8 LG) Protection DC Switch Yes Anti-lslanding Protection Yes AC Overcurrent Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type II / AC Type II Insulation Detection Yes Leakage Current Protection Yes General Topology Transformerless IP Rating IP66 Night Self Consumption <5W(standard) Cooling Fan cooling Operating Temperature Range -25â??C -60â??C 0â?? Relative Humidity Range 100% Max. Operating Altitude 4000m Dimensions (W*H*D) 635mm*530mmâ??224mm Weight 40 Kg 42 Kg HMI & COM Display Wireless & APP+LED, LCD (Optional) Communication RS485, Optional: WiFi / GPRS / LAN Certification Safety IEC62109-1, IEC62109-2 Grid Code VDE-AR-N 4105, EN 50549-1, CEI 0-21, UNE 206006/206007-1 RD 1699/661&413, IEC 61727/62116, AS4777.2 Warranty S Years Remarks: The range of output voltage and frequency may vary depending on different grid codes.

Introduction: The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally. Advantage: ï?¬ Efficient Advanced MPPT technology with up to 99.9% efficiency Up to 22A PV input current perfect for high power ï?¬ Reliable Outputs high quality pure sine wave AC power 8-10kW load power to meet the needs of most ï?¬ User-friendly Industrial design with a modern aesthetic look Easy to install and simple to use ï?¬ Safety 360 degrees of security from hardware to software EU and North American safety approvals ï?¬ All-in-one Solar Charger Controller up to 100A charging current Support for Li-ion battery BMS communication ï?¬ Intelligent Exclusive Li-ion battery BMS dual activation Time-slot function to save cost with peak-valley tariff Essential details Place of Origin: China Model Number: SR-HES4855S100-H Input Voltage: 500vdc Output Voltage: 230Vac Output Current: 100A Output Frequency: 50Hz/ 60Hz Output Type: Single Size: 556MM*345MM*182MM Type: DC/AC Inverters Inverter Efficiency: 95% Certificate: CE/RHOS/IEC Warranty: 5 years Weight: 20kg Inverter type: On-grid and off-grid Solar Inverter Rated power: 5500w Protection: IP65 MPPT Efficiency: 98-99% Display: LCD Communication: WIFI / RS485 Battery type: Lead Acid \ Lithium \ Gel Battery Voltage: 48 VDC Peak power: 11000W Color: White+Black

Introduction: The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally. COMMUNICATION: Embedded Interfaces: RS485 / CAN / USB / Dry contact External Modulesï¼?Optionalï¼?Wi-Fi / GPRS Time-slot charging/discharging function When mains electricity is expensive, the battery inverter is used to carry the load; when the mains electricity is cheap, the mains electricity is used to carry the load and charge, which can help customers to save electricity costs to the greatest extent Time-slot Mains Charging/Carrying Function With 3 definable periods, the user can freely set the mains charging/carrying time within the range of 00:00 to 23:59. During the time period set by the user, if PV energy is available, PV energy will be used first, and if PV energy is not available or insufficient, utility energy will be used as a supplement. Time-slot Battery Discharging Function With 3 definable time periods, users can freely set the battery discharge time within the range of 00:00 to 23:59. During the time period set by the user, the inverter will give priority to the battery inverter to carry the load, and if the battery power is insufficient, the inverter will automatically switch to mains power to ensure stable operation of the load.

Functional characteristics: It has the function of segmented charging and discharging. Backflow prevention and grid connection function. Insulation resistance and leakage current detection function. Working without battery under special conditions. Lithium battery activation function, which can be triggered by mains or PV. Power saving mode, reduce no-load loss. .Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging. Two output modes: mains bypass and inverter output, with UPS function. 360 all-round protection. Allow lead-acid battery and lithium battery access. ON/OFF switch controls the inverter AC output Grid-connected mode can be set. Design characteristics: Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output. Advanced MPPT technology with efficiency of 99.9. LCD screen and three LED indicator lights can clearly indicate the status and data. Intelligent and variable-speed fan, efficiently dissipate heat and extend system life. Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.

Solar Hybrid inverter (inbuilt MPPT) On/Off -Grid Hybrid solar inverter with or without battery PV input voltage up to 450VDC Grid or solar input priotiry can set . Parallel max 9 sets to reach 45KW 3KW,5KW,8KW Direct factory price Easy to install Available OEM /ODM

Off-grid hybrid solar inverter 3KW ,5KW Solar Hybrid inverter (inbuilt MPPT) On/Off -Grid Hybrid solar inverter With or without battery PV input voltage up to 450VDC Grid or solar input priotiry can set . Parallel max 9 sets to reach 45KW Direct factory price Easy to install Available OEM /ODM

Specification/Additional Details Brand SAJ/ Growatt/mindra/ Goodwe / sofar/ We also have many brand inverter as your requirement Phase ; Three Phase Start up Input ; Voltage250 V Output Voltage ;380 V Output Current ; 14.5 A Output Power ; 10000W Warranty:5year In order to cater the variegated demands of our clients, we are offering an excellent quality range of SAJ Three Phase Solar Grid Tie Inverter.

PT330 special inverters are developed for the power supply of water pumps based on the core control algorithm of PT330 high performance inverters and the control requirements of PV water pumps.All series products apply infineon power modules.The funiction of Maximum power tracking,dormant at weak light,wake up at strong light,high water level dormant,underload pre-warning and other control protection functions can ensure normal operation of water pumps according to the customers' requirements to switch to the grid power supply. 1.Through adopting advanced MPPT technology,this product can make full use of the efficiency of the solar cell array. 2.It can automatically adjust the motor speed and the water flow along with the intersity of sunlight. 3.Automatically sleep when on high-water level and automatic restart when on low-water level to realize automatic control through water level. 4.Can prevent pump from anhydrous idling. 5.It also can enter automatically to sleep model when the intensity of sunlight is weak(e.g.The sunset.),as well as can exit the sleep model when the intensity of sunlight is becoming strong(e.g.the sun rise.). 6.Protect itself in trouble and improve the reliablity of whole system.   Model: PT330-011D-3B: DC/AC input voltage: DC input:400-750vdc AC input:3-phase 380V           power:  11KW                 Rated input current: 26A               Rated output current: 25A              Adaptable motor: 11KW

A solar inverter is an important part of a home solar system. It converts the direct current (DC) stored in batteries into alternating current (AC) that can be used by household appliances. Most homes use AC power, although solar panels and small wind turbines often produce DC power. This is why inverters are an integral part of off-grid and grid-connected solar systems. Uses and Benefits of Solar Inverters In the absence of a backup grid, battery-based inverters can meet less demanding requirements. However, if there is an accessible grid, a system with a hybrid inverter can take advantage of it, and has the added benefit of storing power with batteries when the sun is not shining. If the roof is heavily shaded, a microinverter system is a good choice because it has an inverter on each photovoltaic (PV) module and each module is managed separately to provide excellent efficiency and high throughput.

Intelligent Solar Inverter Since the Senergy Power Optimiser handles maximum power point tracking and voltage management separately for each solar module, the intelligent solar inverter is only responsible for the DC to AC inversion. It is therefore a simpler, more cost-efficient and more reliable solar inverter. The fixed string voltage ensures that operation is always at maximum efficiency, independent of string length and temperature. In addition to its function as a DC-optimised PV inverter, the intelligent solar inverter also manages the battery and system energy as part of the Senergy home solution. Versatile and intelligent hybrid inverter for continuous power supply using solar, AC and battery power. This is a simple and intelligent solar inverter with an energy storage system for homeowners who want to store energy in batteries for night-time use or for their own use on demand. It will automatically consume the reserved power from the batteries at night or during power outages. This hybrid PV system will reduce dependence on the utility. Smart Energy Home Intelligent solar invertercan already monitor and manage solar energy production and are perfect for managing energy storage and energy use. Inverters can store solar energy in batteries for use at night, use excess PV energy to heat water, or activate other smart devices during the day to help reduce electricity bills. By managing energy holistically, the PV inverter transforms the smart home into a smart energy home and puts power in the hands of consumers.

Inverters for commercial and industrial photovoltaics and battery storage Saving energy costs and reducing the CO2 footprint are important issues for companies. Three effective ways of achieving greater energy efficiency are: generating and consuming renewable energy through low-maintenance solar PV plants â?? integrating battery storage systems, e.g. to perform peaking â?? and reducing the need for expensive reactive power. senergy new energy offers suitable inverters for all these measures. Be prepared for everything Simple surge protection Firemans switch can be triggered remotely DC combiner to prevent AC lines on the roof Lean solutions for grid and system protection Compact reactive power inverters for new and existing plants

Solar inverter 5kw for large houses, offices and commercial shops. senergys Solar Inverter 5KW is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5KVA. It can easily run 2 tons of AC power using 2 fans, 8 LED lights and 1 fridge. The price of the Solar Inverter 5KW depends on the type of solar system. Solar Inverters 5KW is divided into three categories: 1st grid-connected solar system, 2nd off-grid solar system, 3rd hybrid solar system. Solar Inverter 5KW for large houses, offices and commercial shops. Solar Inverter 5KW from Senergy is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5 kVA. It can easily run 2 tons of AC power with 2 fans, 8 LED lights and 1 fridge. Is this solar panel kit right for me? This kit based on a 5kW micro-inverter is an important residential solar system. It is one of the most popular installed systems. The amount of energy produced by these systems is enormous. A Solar inverter 5kw kit requires a maximum of 299 sq ft of space. This Solar inverter 5kw kit can provide 5,000 watts of DC electricity. Assuming at least 5 hours of sunshine per day and a south-facing solar array, this could produce an estimated 350 to 850 kilowatt hours (kWh) of alternating current (AC) per month. The highest output will be achieved by an unobstructed south-facing view of the sun to obtain maximum solar energy. Actual power generated will vary depending on location, equipment and installation factors. Please refer to your electricity bill for the actual kWh of electricity used each month and compare this to what can be generated by these low cost 5kW PV systems.

Commercial solar inverter are designed to handle the scale of power production and consumption required for large projects. If the system includes battery storage, the inverter can also help store excess solar energy in the batteries or charge it from the grid. Commercial properties typically use three-phase power, and commercial three-phase inverters are designed to synchronize with three-phase power to provide a more stable current. The right choice of inverter for commercial solar and battery systems depends on a variety of factors, including the size and configuration of the solar array, the presence of a battery storage system, the type of electrical system in the building, and local codes and utility policies. Commercial solar inverter is larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Our state-of-the-art commercial solar inverters, combined with our expertise in solar energy, provide innovative solutions that drive your business towards sustainability.

Model Sununo Plus 2K Input Parameters Input Parameters Maximum DC power w 2400 Maximum DC input voltage v 500 Mppt voltage range v 60450 Rated input voltage v 360 Starting voltage v 70 Minimum input voltage v 50 Maximum input current a 11 Mppt track path 1 Number of component strings MPPT per lane 1 Dc switch Built in Output Parameters Output Parameters Rated output power w 2000 Maximum output power w 2200 Rated output current a 91 Maximum output current a 106 Rated AC voltage range v 220180280 Rated grid frequency range Hz 504555 Power factor cos 099 Full load Total harmonic distortion thdi at rated power 995 Protections Protections Overvoltage protection Integrated Insulation impedance monitoring of DC terminal Integrated Dc component detection Integrated Ground fault current monitoring Integrated Grid monitoring Integrated Ac output short circuit protection Integrated Ac ground detection Integrated Ac lightning protection Integrated Overheat protection Integrated Islanding protection monitoring AFD Interface Interface Ac side connector quick connector Dc side connector MC4H4 LCDLEDdisplay LCD 16x2Character backlight LED 3lamp Display language english communication interface RS232 communication method Wi fi GPRS Ethernet optional General Parameters General Parameters Isolation type Non isolated Night wear w

Model Suntrio Plus 25K Input Parameters Input Parameters Maximum DC power w 30300 Maximum DC input voltage v 1000 Mppt voltage range v 180900 Rated input voltage v 600 Starting voltage v 200 Minimum input voltage v 180 Maximum input current pv1 pv2 pv3 a 222222 MPPTNumber of tracks 3 Number of component strings MPPT per lane 02022002 Dc switch Built in Output Parameters Output Parameters Rated output power w 25000 Maximum output power va 27500 Rated AC voltage range 3LNPE220380V180V280V312V485V Rated grid frequency 50Hz45Hz55Hz Power factorcos 08 lead 08 lag Number of output phases 3LNPE Efficiency Efficiency Maximum efficiency 9860 European efficiency600Vdc 9840 MPPT efficiency 995 Protections Protections Overvoltage protection Built in Insulation impedance monitoring of DC terminal Built in Dc component detection Built in Ground fault current monitoring Built in Grid monitoring Built in Ac output short circuit protection Built in Low voltage crossing Built in Overheat protection Built in Ac surge protection Class iii protection class ii protection optional Anti component attenuation module Optional Dc surge protection Level ii protection optional Dc fuse Optional Cluster current detection Built in Islanding protection monitoring AFD Interface Interface DC Jack MC4H4 AC Terminal Terminal block LCDLED display 35 inch LCD Backlight Display language english communication interface 2RS4851RS232 communication method WiFiGPRSEthernet optional General Parameters General Parameters Isolation type Non isolated Night wear w

Model Suntrio Plus 60K Input Parameters Input Parameters Maximum DC power [ w ] 72000 Maximum DC input voltage ( v ) 1000 Mppt voltage range ( v ) 280-900 Rated input voltage ( v ) 600 Starting voltage ( v ) 300 Minimum input voltage ( v ) 250 Maximum input current pv1 / pv2 / pv3 ( a ) 40/40/40 MPPTNumber of tracks 3 Number of component strings ( MPPT per lane ) 04-04-2004 Dc switch Built - in Output Parameters Output Parameters Rated output power ( w ) 60000 Maximum output power ( va ) 60000 Rated AC voltage / range 3L/N/PE,220/380V;180V~280V/312V-485V Rated grid frequency 50Hz/45Hz-55Hz Power factor(cos ) 0.8 lead ~ 0.8 lag Number of output phases 3L+N+PE Efficiency Efficiency Maximum efficiency 98.90% European efficiency[@600Vdc] 98.60% MPPT efficiency>99.5% Protections Protections Overvoltage protection Built - in Insulation impedance monitoring of DC terminalï¼? Built - in Dc component detectio Built - in Ground fault current monitoringï¼? Built - in Grid monitoringï¼? Built - in Ac output short circuit protectionï¼? Built - in Low voltage crossingï¼? Built - in Overheat protectionï¼? Built - in Ac surge protectionï¼? Class iii protection, class ii protection ( optional ) Anti - component attenuation moduleï¼? Optional Dc surge protectionï¼? Level ii protection ( optional ) Dc fuseï¼? Optional Cluster current detectionï¼? Built - in Islanding protection monitoringï¼? AFD Interface Interface DC Jackï¼? MC4/H4 AC Terminalï¼? Terminal block LCD/LED displayï¼? 3.5 inch LCD Backlight Display languageï¼? english communication interfaceï¼? 2*RS485+1*RS232 communication methodï¼? Wi-Fi/GPRS/Ethernet ( optional ) General Parameters General Parameters Isolation typeï¼? Non - isolated Night wear ( w )ï¼?