Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Supply Ability: 50 sets per Month Air consumption: 17-35 M3/min Dimension(L*W*H):5500*1950*2780mm One-timeadvance 6.6m length: Depth: 300 Meters Warranty of core 1.5 years components: Key Selling Points: Competitive Price Drilling Depth: Max.300m Walking speed: 2.5kw/h Machinery Provided Condition: New Power Type: Diesel Usage: Water Well Place of Origin: China Warranty: 1 Year Keyword: deep water well drilling rigs Weight: 9000kg,9000 KG Brand Name: YUXINGHUA Hole diameter: 140-325 Mm Video outgoing-inspection: Provided Type: Rotary Drilling Rig Core Components: Pressure vessel,Gearbox Marketing Type: New Product 2020 Applicable Industries: Garment Shops,Building Material Shops,Manufacturing Product name: Rotary Drilling Rig Model: FY300 Drilling Diameter: 140-325mm Packaging Detail: water well rotary drilling machine Standard Container
Supply Ability: 5 sets per Month Keywords: Rock stone impact crusher machine Dimension(L*W*H):2479x 2970x 2050 mm Capacity(t/h): Max 600 t/h Warranty of core components: 1 year Key Selling Points: Low Maintenance Cost Motor Type: AC Motor Input Max Feeding Size: 500 mm Machinery Test Report: Provided Condition: New Usage: ore,quarry ,sand making Place of Origin: China Warranty: 1 Year Model type: PF Rotate speed: 590-1480r/Min Showroom Location: None Weight: 14000 KG Crushing type: Impact Brand Name: HuaXin Compressive Strength: 100-250 mpa Video outgoing-inspection: Provided Type: Impact Crusher Core Components: PLC,Gear,Other,Motor,Engine,B earing,Gearbox Marketing Type: Other Applicable Industries: Building Material, Shops,Manufacturing application for mining : limestone,rock,concrete,coal Product name: pv liner plate hammer impact crushing parts crusher Protection way: Reversible Crushing Application: mining stone crushing Packaging Detail: metal case ,metal rack fixed, for pv liner plate hammer impact
- Material26MnB5, 34MnB5, EN 10305-2 (DIN 2393) - Technical: Seamless Or Welded; Process: Cold Drawn, Cold Rolled; - Delivery Condition: +C, +N, +SR,+NBK; - Diameter: 20 - 60 mm, Wall thickness: 1.5 - 7.5 mm; Length: Customizable; - Application: Stabiliser, Monobloc shaft, Gear shaft etc.; - Requirements: Excellent reshaping properties (drawing in, hammering), High torsional strength and durability, Excellent welding properties, High levels of geometrical accuracy (eccentricity, roundness), Excellent surface-finish condition.
- Shingle Mono Cells PV Modules Type: 380~400W / 390~410W / 455~475W / 470~490 W / 635~655 W / 635~660W; - Monocrystalline Silicon PERC solar Cells: 158.75*158.75mm for 66SA / 78SA, 166*166mm for 60SB/72SB, 210*210mm for 72SC/72SCD; - Maximum System Voltage (V): DC 1000/1500(IEC); - Dimensions (L*W*H): 1646*1140*35 mm / 1969*1140*35 mm / 1719*1140*35 mm / 2056*1140*35 mm / 2355*1303*35 mm / 2355*1303*30 mm; - Front Glass: AR coating tempered glass, 3.2mm / AR coating tempered glass, 2.0mm for Bifacial modules; - Back Sheet: high weatherability backsheet / tempered glass, 2.0m for Bifacial modules; - Frame: Anodized aluminum profile, Junction Box: IP68 , TUV ,three diodes; - Cable: 1000/1200mm, 1*4mm/ 800mm (Vertical),+250mm/-150mm(Horizontal), 4mm - Connector: Compatible with MC4/original.
- Material: ASTM B337, ASTM B338 Gr 1, Gr 2, Gr 3, Gr 7, Gr 9, Gr 12, Gr 16; - Technical: Seamless; - Process: Cold Rolled, Annealed or CWSR; - Grade: Gr.1 (CP titanium, low oxygen), Gr.2 (CP titanium, standard oxygen), Gr.7 ( Ti-Pa, standard oxygen), Gr.9 (Ti-3Al-2.5V), Gr.11 ( Ti-Pa, low oxygen), Gr.12 (Ti-Mo-Ni), Gr.16 (Ti-Pa,standard oxygen), Gr.17 (Ti-Pa,low oxygen) - Diameter: OD 6.0-273 mm, Wall thickness 0.3-22 mm, Length Within 18000 mm or Customized; - Application: Heat exchangers and condensers, Corrosive fluid transmission pipeline system, Titanium bicycle tube, automobile exhaust pipe,Offshore aquaculture; - Features: Light weight, excellent corrosion resistivity, strongly heat-resistance, high strength. - Inspection: Ultrasonic testing, Hydrostatic testing, Flattening testing, visual surface inspection, Dimensional inspection, tensile properties inspection and Chemical elements analysis.
- Material: 100Cr6, SKF3, GCr15, SKF3S; - Technical: Seamless , Process: Piercing, Cold Drawing, Spheroidizing Annealing, Annealing etc.; - Size Range: OD 10 ~ 160 mm, Wall thickness: 1~ 25 mm; Length: Customized; - Delivery Condition: (1) +C No heat treatment after the final cold drawing process, (2) +LC After the final heat treatment there is a suitable drawing pass,(3) +SR After the final cold drawing process there is a stress relieve heat treatment in a controlled atmosphere, (4) +A After the final cold drawing process the tubes are annealed in a controlled atmosphere, (5) +N After the final cold drawing operation the tubes are normalized in a controlled atmosphere; - Application: Widely Used in Bearing Industry and Automotive Parts, such as Hydraulic Cylinder Pipe, Steel ball, roller and collar of large machinery bearing, axis of rotation, blade, stator pump, profiling, sleeve, mandril, etc.; - Features: High and uniform hardness and wear resistance, and high elastic limit.
- Power: Solar street Light 40W; ( 30W, 50W, 60W, 70W, 80W, 100W,120W optional ) - Material: 6063 Die Casting Aluminum; - LED Brand: Sanan 5050, Lumen: 4800-5600 lumens; - Solar Panel: Monocrystalline Silicon 18V/60Wp; - Battery: Grade A Lithium Ion Battery 24Ah / 12.8V; - Installation Height: 6-7M, Installation Distance: 18-20M; - Rainy Day Time: 6-7 days, Working hour for 12 hours, Working Temperature: -20 C ~ 60 C ; - Certificate: IP65, CE, FCC, MSDS, ROHS.
- Solar Garden lamps 30 W / 50 W; - Housing: Die Casting Aluminum; - 16 V / 40 W / 50 W / solar panel ; - Ternary Lithium Battery 12.6 V / 14 Ah / 22 Ah; - Philips LED chip SMD 180 pcs / 240 pcs; - Light Size: OD 500/605 mm, H 170 mm, Case Mounting Tube: ID 65 / 76 mm; - Control Mode: Light Control / Radar Sensor/ Time control ; - charging time 6 to 8 hours, Lighting time 12 hours;
- Solar flood lamp 40W/60W/120W/200W (Tetrad ); - Housing: Die Casting Aluminum; - 6V / 15W / 18W / 25W / 30W solar panel with 5M cable; - LiFePO4 Battery 3.2V / 10Ah / 13Ah / 30Ah / 35Ah; - LED chip 5730 SMD 180pcs / 216pcs / 396pcs / 660pcs; - Light-dependent control / Time control with remote; - charging time 6 to 8 hours, Lighting time 12 hours; - Battery indicator and intelligent timing, Color box/set.
- Type: Staple Set Disc Brooms; - Filaments Material: PP Wire / PBT Wire / PA Wire; - Filaments Diameter: PP / PET / PA 1.0 ~ 3.2mm; - Disc Material: Plastic; - Disc Fixed: At customer's request; - Disc Size: ID 110~ 400mm, Customizable; - Functions: Street / Market / Venue / Station / Outdoor and Indoor Cleaning etc.; - Compatible Vehicle: Dulevo / Hako Diesel and Electric Sweeper etc.
- Type: Spiral Wound Roller Brooms; - Filaments Material: PP Wire / PBT Wire / PP + Steel Wire; - Filaments Diameter: PP / PBT / PA 1.8 ~ 3.2 mm; - Hollow Shaft Material: Steel Tube; - Shaft Flange: At customer's request; - Broom Size: ID 350 ~ 700 mm, Customizable; - Functions: Road / Street / Outdoor and Indoor Cleaning etc.; - Compatible Vehicle: Elgin Diesel Sweeper etc.
- Solar Lawn lamps 5 W / 7 W; - Housing: Aluminum Alloy; - 5 V / 5 W / 8 W / solar panel ; - Ternary Lithium Battery 4.2 V / 4.4 Ah; - LED chip SMD 20 pcs / 30 pcs; - Light Size: OD 205 mm, H 170~340 mm, Flange: ID 110 mm; - Control Mode: Light Control; - charging time 6 to 8 hours, Lighting time 12 hours;
1. Solar portable flood light 50W (LED 10W) 2. Polysilicon 5V/3W solar panel 3. LiFePO4 battery 3.7V / 6000mAh 4. charging DC 5v/1A 4 hours 5. 8-12 hours for lighting, Lamp beads: 5730-36PCS 6. Waterproof rating: IP65 used for outdoor and indoor 7. ABS housing 8. Irradiation angle: 120 degree 9. Lamp body size: 175*130*50 mm 10. Color box: 183*135*55mm /0.4 KG
~ Body Dimension: L*W*H (mm) 2300*1190*1500; ~ Wheel base (mm): 1570, Wheel track (mm): 1040; ~ Mass Weight (kg): 350, Enclosed Driving Cabin; ~ Max Loading (kg): 220 , Passenger For 3 (include Driver); ~ Motor Type: Permanent Magnet In-wheel DC Motor; ~ Dual Drive (KW) : Rated Power For 2-1000, Max Power For 2-2500; ~ Battery: 60V 45 - 58Ah Lead Acid Battery, Charging Time For 8-10 hours; ~ Max Continued Mileage (KM): 70-80, Max speed For 40-45 km/h; ~ Climbing Capability: 15%; ~ Brake Systems: Hydraulic Disc Brake, Hand Brake; ~ Front and Rear Tyre Size: 130 /70-12; ~ Steering Type: Hand Bar, Parking Mode For Manual (Rear Brake); ~ Operation Configuration: Button Start / Electric Window / Central Lock with Remote Control / Large Screen Multimedia terminal with Rear View Camera, MP4 and Bluetooth / Open Skylight and Rear Window / Front Wiper with Water Spray / Warm Wind and Natural Wind / USB; ~ Optional Function: Car- Carrying Air Conditioner; ~ SKD or CKD and OEM or ODM is acceptable .
1. Watt: 100W / 200W / 300W ( LED 15W / 20W / 30W) 2. Housing: ABS 3. Lumen: 1600~3300 lumens 4. Working hour: 12 hours 5. Solar Panel: Polycrystalline Silicon 6V/15Wp/24Wp/30Wp 6. Battery: 15Ah/22Ah/30Ah 3.2V LiFePO4 Battery 7. Light Size: L475~710mm * W360mm * H70mm 8. Solar Panel Size: 335mm*360mm~590 mm 9. Rainy Day Time: 2-3 days 10. Led Chip:5730 SMD 696PCS/864PCS/1392PCS 11. Exposure area: 50~100 Square 12. Packing:L510~740mm * W385 * H400mm/4~5pcs 13. IP Rating: IP65 14. Warranty for 1 years
1. Solar multifunction fan 10W with LED light 2. Solar panel: polysilicon panel 6V/12W 3. Battery capacity: 32650 Lithium 15500mah 3. Charger: 5 V power supply adapter 4. Wind Type:3 Gears , Soft and strong 5. Charging time: 3-5 hours with USB Funcation 6. working time: 5-8 hours 7. Fan size: 10 inches, 32cm high, 30cm wide 8. Solar panel size: 34*29cm 9. Packing q'ty: 1 sets/box 10. Measure: 36*22*31 cm 11. FCL: 3KGS
1. Solar Panel: 100W High Efficiency Monocrystalline Silicon 2. Battery: Lithium Battery 60Ah 3. Material: Galvanized Sheet Steel, SurfaceTreatment by Coating 4. SurfaceTreatment : Color Coating Optional 5. Meansure:L1600 mm * W 480 mm * H2560mm 6. Function: LED Street light; CCTV Camera; LED Billboard ; Wireless Charge 9-12V/2A*2 ; USB Output 5V/2A; WIFI / 4G Optional; Blutooth Speaker 7. Warranty: 2 years 8. Application: Outdoor, Office Building, Hospital, Park, Piazza, Courtyard, Plant,Campus, Gym etc.
