Iacdrive|AC drives|inverter solutions I5100-PV Solar pump inverter is positioned in environmental-friendly and economical PV market, the product is applied to PV pump system, replaces water storage with electric storage and needs no battery modules. Product Advantages: The direct current generated by solar modules is input to the inverter and then converted into the alternating current to drive various pumps .The output frequency is adjustable in real time according to sunlight intensity change. Application: Agriculture, forestry irrigation, desert control, grassland animal husbandry, municipal water. The features of the I5100-PV solar pump inverter for PV Pump are as followsï¼? Maximizing power generation efficiency of solar modules with the use of advanced MPPT control technology; 1.Adjusting water outflow of pumps quickly on basis of sunlight intensity change; 2.Automatic hibernation and wakeup; (1) Hibernate at high water level and wake up at low water level; (2) Hibernate at sunrise and sunset and wake up at strong sunlight. 4.Under load protection and fault protection of water level sensor avoiding pumping off after water supply dries up ; 5.TI DSP technology and Infineon PIM design, with functions of over current, overvoltage and over temperature protection, built-in C3 filter, achieving reliable, automatic and unattended running. solar-pump-inverter-system_i5100 Solar-pump-inverter-system_i5100 Specification: Max DC input 800VDC Recommended MPPT voltage range 350~750VDC Recommended input voltage 513VDC MPPT efficiency 99.9% Input channel 1 Rated output voltage 3-phase 380VAC Output frequency range 0~60Hz Max efficiency of the machine 97ï¼? Ambient temperature range (G-type inverter with water pump) Cooling method Air cooling Protection degree IP20 Altitude Below 1000m; above 1000m, derate 1% for every additional 100m. Standard CE Main parameters of the I5100 inverter I5100-PV-solar-pumping-inverter-model I5100-PV-solar-pumping-inverter-model Iacdrive|AC drives|inverter solutions -
LED Brand: Osram Golden Dragon Plus Power Module LED number: Every model 5 pcs Osram Led LED Life: 50.000 hours working Voltage: 12V-24V DC Working Heat: -30(min),+65(max)C Size: Length : 1230mmX Width:335mm X Hight 65mm Waterproof. 123 cm approx 13.5.
CATEGORY Saddlestitchers MANUFACTURER Miller Martini MODEL VALORE STATIONS 6 YEAR 2004 Availability 2022-04-12 Description: 6 station x Double Vertical Feeder Typ 1559 plus cover feeder Stitching Unit Typ 1558 Three Knife Trimmer Miller Martini Typ 1522 Mechanical Speed max. : 6000 Cycles / Hour Format Untrimmed Max X: 365 mm Format Untrimmed Min X: 105 mm Format Untrimmed Min Y: 115 mm Format Trimmed Max X: 360 mm Format Untrimmed Max Y: 300 mm Format Trimmed Min X: 140 mm Format Trimmed Min Y: 76 mm Product Thickness: 10 mm
Approx. Price: Rs 625 / Unit Compressed Asbestos Fibre Jointing is a consistently uniform and resilent product. A price worthy quality of dependable performance, plus adaptibility to many sealing requirements make this 'STEAM' JOINTING the choice sheet packing of Plant Engineers and Maintenance Man. CHAMPION STYLE 20 jointing nd developed for general pupose appications and this quality is applicable to a wide range of duties with less severe working conditions of temperature and pressure. Features Recommended Max Temperature : 380C Recommended Max Pressure Kg./cm2 : 35 Kg/sq.cm. Specification Compliance IS-2712 - 1998 IS-2712 - 1979 Grade W / 3 IS 2712 - 1971 Grade C
CATEGORY Sheetfed MANUFACTURER Heidelberg MODEL PM 74 COLORS 2 55 Millions SIZE 530x740 mm Description: HEIDELBERG PM74 2 Color Offset Printing Machine Size:530 x 740 mm. - stream feeder - Alcolor dampening units - Baldwin cooling device - Easyplate - Weko T6 Plus powderspray Sheet size: min 210 x 280 mm, max 530 x 740 mm Printing speed: max 12,000 sheets/hour Printing units: 2 Machine size: Length: 3,240 mm, Width: 2,370 mm double sheet control
Goods : SYP (Southern Yellow Pine) Chips and Hardwood (mix oak, gum, beech…) Bark Content : 3% Maximum Moisture Content : 45% average Certified Fumigation : Certification Dimension : Size: 0.45cm – 4.5cm; 90% Minimum Oversized : =4.5cm: 8% max Undersized : =0.45cm; 5% max Packing : In Bulk Contract Period : 5 Years (Proposed annual adjustments Pursuant to Corresponding Indexes) Quantity : Shipment of – 400,000 Gross Annually Tolerance : Plus, or Minus 15% Loading Port : Newport News, Va. NOTES: 1. CFR Incoterms 2010 2. Irrevocable, confirmed letter of credit drafts drawn at sight.
MV-28 H/Performance, 10K +Type of body: Wafer +Flange : JIS 10K / 20K, ANSI 150 / 300, PN 16 / 25 +Max. Pressure: 10, 20, 30 kg/cm2 + Material : -Body : Ductile iron, Cast steel, Stainless steel (304, 316) -Disc : Stainless steel (304, 316 & 316L) -Stem : Stainless steel (304, 316 & 316L) -Seat ring: EPDM, PTFE, RTFE, Metal + Face to face dimension : -ISO 5752, API 609, MSS SP-68, -DIN 3203/K1 (Short) - Double eccentric (Double offset) disc - Vacuum equipment (up to 10-5 Torr) - Max. Temperature : EPDM : -20 c to +120 c PTFE : -60 c to +160 c RTFE : -60 c to +200 c Metal : -120 c to +450 c + Operator : Lock lever (3/4 in~ 6 in) Worm gear (3/4 in~ 40 in) +OPTION - Long bonnet - Lugged body (1â?³~ 6â?³)
NOB CISCO3925E/K9 CISCO3925E ROUTER-------2400Euro MARK LEVINSON 533H USED------5000Euro MANLEY VOXBOX PREAMP/VOICE PROCESSOR----1800Euro DOLBY CP-750 Stereo Digital Cinema Processor--1400Euro Dolby Lake LP4D12 Processor DLP-----1700Euro LAB GRUPPEN PLM20000 DSP AMPLIFIER - USED----5000Euro Lab Gruppen PLM 10000Q SP-----3500Euro Lab Gruppen PLM 14000-----4000Euro Ampeg B15 Heritage Series Bass Combo Amplifier HB-15-----1600Euro BSS OMNIDRIVE COMPACT PLUS FDS-366T-----1200Euro L ACOUSTICS LA48/LAB GRUPPEN FP6400---1000Euro Lab Gruppen FP2600 with only 3 hours of use----700Euro KLARK TEKNIK DN9848 LOUDSPEAKER PROCESSOR----1500Euro DBX 160SL Blue Precision Stereo Compressor/Limiter---1500Euro Eventide H-3000-se Studio Ultra Harmonizer Effects Processor---Euro500 Hhb Cdr-850 Cd Recorder ---400Euro Empirical Labs EL8X-S Distressor Stereo Pair---1200Euro Tc Electronic Finalizer 96k Studio Mastering Processor---700Euro Drawmer 1961 Vacuum Tube Equaliser---Euro1000 Bss Audio Fds-334T Minidrive Loudspeaker---300Euro Bss Audio Fds-366t Omnidrive Compact -----1300Euro BSS FCS-960 Dual Channel/Mode Graphic EQ--700Euro Dolby Lake Contour Dsp 2 X 6 Speaker Processor--700Euro Lab Gruppen Plm20000Q/Bp Plm 20000Q Powered Loudspeaker Management ---4000Euro Lab Gruppen PLM 10000Q/SP Powered Loudspeaker Management System---3500Euro Xta Dp 226 - Dolby Lake Contour Dsp 2 X 6 Dsp With Aes Ebu Digital---600Euro Lab Gruppen PLM 14000-----4000Euro Lab Gruppen Plm14000/Bp 2X22550W 8 Ohm Binding Post Power Amplifier----3800Euro DBX DriveRack 4820 4X8 Loudspeaker Management System---1200Euro DBX DriveRack 4820TI 4X8 Loudspeaker Management System----1900Euro DBX DriveRack 4820TIO - Complete Equalization and Loudspeaker Ma---2500Euro dbx 4820TO DriveRack Loudspeaker ------2000Euro dbx 4820 4800 w/ blank front panel DriveRack---850Euro SE Electronics SE Munro Egg 150 Monitoring System-----950Euro Audio Technica M3 Wireless in Ear Monitor System AT-M3--300Euro Shure PSM 1000 | Personal Monitor System, Dual Receiver P10TR---1500Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz---400Euro Shure P9TRA Wireless In-Ear Monitor System----600Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz----300Euro
TL-20KW's parameters rotor diameter£¨m£© 10 speed adjustment way electromagnetism plus drift blade material intensive fiberglass stop way electromagnetism plus manual operation blade quantity 3 generator type permanent magnetism of three-phase current rated speed(m/s) 12 rated power 20KW start up wind speed(m/s) 4 max power 30KW work speed(m/s) 4-35 rated rotor speed(r/min£© 200 security wind speed(m/s) 45 work voltage DC360V-500V start up force moment(n/m) 17 weight of main body£¨kg) 1400.
TL-20KW's parameters rotor diameter£¨m£© 10 speed adjustment way electromagnetism plus drift blade material intensive fiberglass stop way electromagnetism plus manual operation blade quantity 3 generator type permanent magnetism of three-phase current rated speed(m/s) 12 rated power 20KW start up wind speed(m/s) 4 max power 30KW work speed(m/s) 4-35 rated rotor speed(r/min£© 200 security wind speed(m/s) 45 work voltage DC360V-500V start up force moment(n/m) 17 weight of main body£¨kg) 1400.
TL-30KW's parameters rotor diameter£¨m£© 12 speed adjustment way electromagnetism plus drift blade material intensive fiberglass stop way electromagnetism plus manual operation blade quantity 3 generator type permanent magnetism of three-phase current rated speed(m/s) 12 rated power 30KW start up wind speed(m/s) 4 max power 35KW work speed(m/s) 4.0-35 rated rotor speed(r/min£© 180 security wind speed(m/s) 45 work voltage DC360V-500V start up force moment(n/m) 22 weight of main body£¨kg) 1700.
Head selection Rigid stand structure, double beam stand for the model above 12heads, advanced vibration-preventive pad and improved auto-lubricating system make the embroidery more reliable, stable and less trouble when high speed working, meantime enhance the life span of the machine; Machine frame driving in x-axis with traverse system for the model above 8heads, y-axis in linear guide rail driving, plus imported ac servo motor for frame driving New development on the frame driving: x and y axis adopting homo-cogwheel and rack and belt system plus the imported ac servo motor for frame driving, which revolutionarily changed the frame driving system Max speed:2-10heads: 1200rpm; 12-15heads: 1100rpm; 16-20heads: 1000rpm New type individual tension base with threading tubes, which can reduce the friction with the thread during high speed running.
Trough idler is used in the steel industry, harbor, coal industry, power industry, cement industry, etc. Besides we can manufacture the rollers and idlers according to the buyers' requirements! Notes:custom Trough Roller:Hengguang Conveying Machinery 1. Conveyor roller idler feature: 1. Roller idlers Dia 50mm-219mm, length 190-3400mm, which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc 2. Tube: Q235 3. Shaft: 45# STEEL 5. Bearing: Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 clearance. 6. Seals: Grease retaining inner seal with Multi-stage Labyrinth and Retention Cap with Outboard Rubbing Flinger Seal. 7. Lubrication: Grease is Lithium soap type grease with Rust Inhibitors. 8. Welding: Mixed gas shielded arc welding end 9. Painting: Ordinary painting, hot galvanized painting, electric static spraying painting, baked painting. Besides we can manufacture the rollers and idlers according to the buyers' requirements. Idler Diameter(mm) Length Scope(mm) Shaft Diameter(mm) Bearings Type(Min-Max) Idler's Shell Wall Thickness(mm) 50 150-2500 20;25 204 3.2-4.0 76 20;25 204 205 89 20;25 204 205 3.2-6.0 102 20;25;30 204 205 305 3.5-6.0 108 20;25;30 204 205 305 306 114 20;25;30 205 206 305 306 127 20;25;30 204 205 305 306 133 20;25;30 205 206 207 305 306 140 20;25;30 205 206 207 305 306 152 20;25;30 205 206 207 305 306 307 308 4.0-6.0 159 20;25;30;40;45 205 206 207 305 306 307 308 165 20;25;30;40;45 207 305 306 307 308 4.5-6.0
Trough idler is used in the steel industry, harbor, coal industry, power industry, cement industry, etc. Besides we can manufacture the rollers and idlers according to the buyers' requirements! Notes:custom Trough Roller:Hengguang Conveying Machinery 1. Conveyor roller idler feature: 1. Roller idlers Dia 50mm-219mm, length 190-3400mm, which are used in the steel industry, harbor, coal industry, power industry, cement industry, etc 2. Tube: Q235 3. Shaft: 45# STEEL 5. Bearing: Single & Double Row Deep Groove Ball Bearing 2RZ&2Z with C3 clearance. 6. Seals: Grease retaining inner seal with Multi-stage Labyrinth and Retention Cap with Outboard Rubbing Flinger Seal. 7. Lubrication: Grease is Lithium soap type grease with Rust Inhibitors. 8. Welding: Mixed gas shielded arc welding end 9. Painting: Ordinary painting, hot galvanized painting, electric static spraying painting, baked painting. Besides we can manufacture the rollers and idlers according to the buyers' requirements. Idler Diameter(mm) Length Scope(mm) Shaft Diameter(mm) Bearings Type(Min-Max) Idler's Shell Wall Thickness(mm) 50 150-2500 20;25 204 3.2-4.0 76 20;25 204 205 89 20;25 204 205 3.2-6.0 102 20;25;30 204 205 305 3.5-6.0 108 20;25;30 204 205 305 306 114 20;25;30 205 206 305 306 127 20;25;30 204 205 305 306 133 20;25;30 205 206 207 305 306 140 20;25;30 205 206 207 305 306 152 20;25;30 205 206 207 305 306 307 308 4.0-6.0 159 20;25;30;40;45 205 206 207 305 306 307 308 165 20;25;30;40;45 207 305 306 307 308 4.5-6.0 Advantage: The life time: More than 30000 hours Samples for testing are available. The more relaxed payment terms
Product details: Place of origin: guangdong, china (mainland) Brand name: oem Model number: mini Color: white Function: graphics Usage: indoor Payment & shipping terms: Minimum order quantity: 100 pcs Packaging details: white box 19*10.5*4.3mm, or other package as requested. Delivery time: 5-10 working days after order confirmed Payment terms: t/t, l/c Supply ability: 50000 pieces per month Detailed product description: Led car display Easy use, super bright 9 message, 3 speed Delicate and energy saving Long span time, 1 year warranty Functions: Can save 9 message, each message can show max 250 characters. 3 speeds only Creating a text message Step 1: Connect the electric power supply 12v. On/off button to turn on or turn off the display. Step 2: Press the edit button. This puts the display into edit mode. The screen will display. P:1 Note: the number after í¦pí¦ indicates the memory location (in this case, location 1) Total 9 memory locations (p:1í¡p:9). To change a memory location, press button 1 to 9. Press ent, it will show blinking rectangle, then inputs information by the characters in the remote control surface í¦aí¡z, aí¡z, ! cap to change the big and small letter. Press n, back to the edit mode, press y, it will clear the messages and back to the default setting. Press ent to make your confirmation. Step 3: Press the spd button. The display will show the scrolling speed for the message: Sp:1 Note: sp indicates the speed at which your message will scroll. Sp1: fast Sp2: moderate Sp3: slow Three speeds. To change the speed, press number 1 to 3.Press ent to make your confirmation. Industrial packing box
Quality Alfalfa Hay for Animal Feeding Stuff/hay cubes/alfalfa hay and cubes alfalfa hay is an excellent source of good quality protein and fiber. Alfalfa is a legume hay and times called â??Lucerneâ??. These hays are higher in protein and minerals and are more palatable than grass hays. Alfalfa, in particular, is high in energy and is an excellent source of vitamins and minerals. When properly cured, alfalfa is the best of the legume h ays from a nutrient standpoint. It has the most feed value of all the perennial pastureforages. Alfalfa is used as for horses, dairy cows, beef cattle, sheep, chickens, turkeys and other farm animals. SPECIFICATIONS; CRUDE PROTEIN (ODM) 16-18 % ADF Acid Detergent FIbre 32-35 % (plus/minus 10 percent) NDF Neutral Detergent Fibre 40-44 % (plus/minus 10 percent) MOISTURE : 12 % MAX AFLATOXIN : 20 ppb MAX PURITY : > 90% CHOP SIZE: > 10 cm GMO : Free RADIATION : Free DRIED : DRIED : Suncured Late Maturity Mid to late bloom Moderate or below leaf content Generally coarse stemmed. Alfalfa hay may show light damage. Bales are free from any poisonous or animal non-healthy products or materials
For medium/low pressure hydraulic oil, air, water transportation Product Description Noise insulation Sheet better known as Sound deadner or floor silencer is a composite Material based on asphalt fillers and small Quantity of polymer as binder used in the Automotive interior floor for controlling Noise Vibration and Harshness Application Used on the cab floor, tunnel, door, pannel Lower deskboard, vertical surface or over Hanging parts of vehicle like passenger car Commercials & utility vehicle and tractor Form of Supply Size as per dimensional requirement Typical Physical Properties Color : Black Thickness : 1.5-3.0 mm Sp. Gr. : 1.4-1.8 Evaporation loss 30 (minutes)/150¦ C : 1% Max. Heat Flow : No break due to Sagging Adhesion Strength : 5.0 Kg/cm2 (mm) Sound Atenuation : 8-17 db/sec. Smoke temp. : Above 150¦ C Thermal fusion weldability : 50% and above Bondability - 20¦ C / 5¦ C : No crack Dropping : No Sag crack Cold impact resistance - 20¦ C / 5¦ C : No crack or peeling Coefficient of damping : 0.08 and above Over heating - 90¦ angle : No mark, peeling, falling Tensile shear strength : 0.2-0/Kg cm2 (min) Impact resistance - 20¦ C / 5¦ C : 35 or more Corrosion resistance : No corrosion Shrinkage : < 2%
Name:Modular assembly PLUS tricycle bicycle Model No.:CYL12 Ages: 7-13 Years Child Length : 105 - 145 cm / 41 - 57 inch Time to build: 2.5 hour Product N.W:11.5 kg Max weight: 40kg/ 88 lbs Packing:1 set/Colour Box Colour: Silver Material:Aluminium alloy+High strength PP Certification: EN 71,EN 14619,CE ,RoHS,etc. Advantage:DIY+Light weight+High strength Function:STEAM toy to make kid more smart MOQ:100 Sets Price:USD 98/set
Name:Modular assembly PLUS Children car with 4 wheels Model No.:CYL13 Ages: 9-15 Years Child Length : 110 - 160 cm / 43 - 63 inch Time to build: 2.5 hour Product N.W:12.7 kg Max weight: 50kg/ 110 lbs Packing:2 set/Colour Box Colour: Silver or gold Material:Aluminium alloy+High strength PP Certification: EN 71,EN 14619,CE ,RoHS,etc. Advantage:DIY+Light weight+High strength Function:STEAM toy to make kid more smart MOQ:100Sets Price:USD 108/set
Voltage/Freqency: 220-240V~ 50Hz, Input power:800W No-load speed:0-1100/min Impact Rate:0-4400/min Impact force:3.0J Max Drilling Capacity: concrete:26mm Steel:13mm Wood:30mm 1.SDS PLUS DRILL BITS 2.Three Function:DRILLING / Hammer DRILLING / HAMMER 3.User-friendly reverse 4.Expert quality 5.Constant variable speed control 6.26mm drilling capacity 7.Two-speed mechanical gear box 8.Rotation stop for chiselling 9.Safety clutch 10.Anti stop soft grip
