style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm; style 2: min. 50% of whole kernel above 17 mm, and 50% of halves; style 3: min. 15% of whole kernel and premium halves above 14mm; style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm; style 6: premium pieces above 9mm. - > other grades and styles may be available or produced to your needs on request. packaging and shipping: - > average moisture: 1. 5% - > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content. - > shelf life: raw kernel 18 months
style 1: min. 90% of whole kernel above 17 mm; of which 15% >20mm; style 2: min. 50% of whole kernel above 17 mm, and 50% of halves; style 3: min. 15% of whole kernel and premium halves above 14mm; style 4: min. 80% of halves between 9 and 15mm; less than 5% of wholes over 10mm; style 6: premium pieces above 9mm. - > other grades and styles may be available or produced to your needs on request. packaging and shipping: - > average moisture: 1. 5% - > oxygen level: maximum of 3% of oxygen must be respected, in order to better preserve its content. - > shelf life: raw kernel 18 months
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
evian has naturally occuring elecrolytes contributing to the taste nature intended. Mineral Composition (mg/l) Calcium Ca++80 / Magnesium Mg++26 / Sodium Na+6,5 / Potassium K+1 / Silica Si02 15 Bicarbonates HC03-360 / Sulfates S04--14 / Chlorides CI-10 / Nitrates N03-3,8 Dissolved solids at 180�°C: 345mg/l Neutrally balanced pH = 7,2 evian�® is all natural and perfectly pure. Each drop of Evian starts as rain and melting snow on the peaks of the Northern Alps. It filters through layers of glacial sand during a 15+ year journey deep in the heart of the mountains. Through this process, Evian is filtered naturally, without chemicals, giving it the purity, mineral content, and taste that nature intended. EVIAN mineral water This mineral water is with French label EVIAN - 24 x 33 cl pet bottles EVIAN - 24 x 50 cl pet bottles EVIAN - 12 x 75 cl (sport cap) pet bottles EVIAN - 12 x 100 cl pet bottles EVIAN - 12 x 150 cl pet bottles
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
COMMODITY: Grade A Chicken Paws Origin: BRAZIL-SIF plants DELIVERY: First Shipment in approximately 90 working days PACKING: Packing carton contains poly bags in a freezer carton= Approx. 10-20kg/per carton Total 27 MT of frozen chicken per 40â?? container stored at -18�°C INSPECTION: S.G.S Inspection or equivalent surveyor at Sellerâ??s cost INSURANCE: 110% to be covered of the Sellerâ??s cost PLANT: Chicken Products will be selected from a designated plant with an acceptable SIF number. It will not be known which plant the order will originate from until an order is placed with the Slaughterhouse upon receipt of Buyers Letter of Credit (LC). PROCEDURES: 1. Buyer issues ICPO/LOI to Seller with POF 2. Seller issues FCO, and Buyer signs and returns FCO, with POF with ATV (or SWIFT TELEX bank to bank). 3. Seller signs FCO and returns it to the Buyer in PDF format. 4. Seller issues Sale and Purchase Agreement Contract within 24 hours, 5. Buyer then signs and seals the contract and returns it to the Seller, then Seller reviews the changes, if necessary, as agreed to by both parties and then Seller signs it and returns to Buyer in PDF format. 6. Within five (5) Banking days of signing SPA, Buyer's Bank issues the Operative Financial Instrument (ARLC or SBLC) from a top 25 world bank and as agreed by Seller's bank. 7. Seller, after receipt of 100% Irrevocable, (ARLC), Automatic Revolving Letter of Credit or confirmed SBLC. Performance Bond of 2%" (PB)will be issued within a reasonable time for the safety of the Buyer. (As Per instructions, terms, and conditions below. 8. Shipment Commences per Purchase and Sales Agreement 9. Against presentation of shipping documents presented to Buyer the Seller according to SIGNED SPA. Buyer shall make payment via SWIFT MT103 at loading port within 1-2 banking days after receiving shipping documents and commercial invoice per shipment. If you are interested in the above, please contact me.
The Main Quality Of Turmeric Is Called As Rajapuri Which Is Produced In Sangli, Maharashtra. Masala Manufacturers Mainly Use It Due To Its Saffron Colour. The Second Main Quality Is Salem Gattha Which Is Produce In Salem, Tamil Nadu And That Is Why Its Name Is Pronounced As Salem Gattha. Rajapuri Quality Is Also A Known Quality And Attracts The Masala Manufacturer Besides The Salem Variety. But Production Of This Quality Is Low At ~2lakh Bags. Both Rajapuri And Salem Quality Fetch Higher Prices. Third Quality Is Produced In Messur, Karnataka And Called As Godal Patte. It Is Considered Slightly Inferior In Quality To The Former 2. The Fourth Quality �?? The Finger Quality Gets Its Name From Its Shape - Which Looks Like Human Finger. Major Producing States Are Tamil Nadu, AP, Maharashtra. Karnataka, Orissa, Meghalaya, Bihar And Assam Are The Main Turmeric Producing Areas. Moreover, Erode, Selam And Rajapur Are The Main Trading Place. Other Producing Countries Are Myanmar And China. Total Production Of These States Is Around 2.50 Lakh Bags In Which Meghalaya Production Is Higher At Around 100000 Bags While The Other States Contribute For 50000 Bags Each. Sowing Starts In July While Main Arrival Time Is February. In 2008, Total Production Of Turmeric Was Around 4200000 Bags While In 2009, It Is Expected To Touch The Level Of Around 45-5000000 Bags. Total Consumption Is Around 4500000 Bags Which Include Both Export And Domestic Demand. India Is The Largest Producer And Exporter Of Turmeric Powder. Bangladesh, Pakistan, Taiwan, Sri Lanka, Burma Are Other Significant Producers Of Turmeric Powder. US Is The Largest Exporter Of Turmeric, India Provides 90 % Of The US Demand, Followed By Dubai, Saudi Arabia, Sri Lanka & Bangladesh SPECIFICATION FOR TURMERIC WHOLE: Type: Finger/Bulbs - Polished Or Unpolished Flexibility: Hard Broken Pieces (Fingers
- Used Rail STEEL in stock - R-50/R-65 Procedure 1. Buyer shall issue LOI(Letter of Intent) to Seller 2. Seller shall issue SCO(Soft Corporate Offer) to Buyer and Buyer shall issue ICPO(Irrevocable Corporate Purchase Order) to Seller when it is accepted. 3. Buyer shall issue MT705 or the attached BCL(Bank capability Letter) through their bank to prove the bank capability. 4. ICPO shall be written with Buyer companyâ??s letterhead, and include Buyer banking information and representativeâ??s passport copy 5. Seller shall issue to Buyer the draft of SPA(Sales and Purchase Agreement) together with IMFPA(Non-Circumvention, Non-Disclosure Agreement) & NCNDA(Irrevocable Master Fee Protection Agreement) and all of agreements are signed(Sealed,Endorsed) together when both agree. 6. Buyer shall issue the MT700, 100% Irrevocable At sight L/C (Letter of Credit) through the bank SWIFT for the full value of the commercial invoice. 7. Seller's bank shall issue PB(Performance Bond) equivalent to 2% of the value of the L/C to the buyerâ??s bank after Sellerâ??s bank approves the L/C. 8. The delivery schedule of the signed SPA (contract) shall keep on time and shipment shall arrange as soon as possible. Buyer can check and get the followings once the BCL(proof of bank capability) and MT700 are transferred and confirmed through the bank SWIFT system.. Seller's business license Manufacturer Export license Certificate of ownership Certificate of Origin Certificate of Export Permission Proof of Product Certificate of Chemical Composition SGS report for technical specification test Ownership transfer Sight Inspection for Seller's Warehouse Any of additional documents shall be exchanged only through the secured Bank channels(Bank SWIFT) such as MT700 or MT705. If you are a real buyer, feel free to contact me. The seller has 5 million tons in stock.
Code 91100: 4-ties Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: L 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 82800: Protects wound from contaminants and absorbs secretion. Moisturizes, benefits healing, comfortable Features: 1. Moisturizes, benefits healing, hypoallergenic. 2. Water-resistant and dirt-repellent 3. Flesh color, soft and comfortable. Size: 6 cm x 2.5cm x 7 Dressings (S) 6 cm x 4.0cm x 5 Dressings (M) 6 cm x 8.0cm x 4 Dressings (L) Material: PU, CMC
Diamond Shape: The Guinness World Record 2022. Largest Surgical Face Mask In The World The Guinness World Records announces that the mask is 50 times larger than a standard face mask. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: as photo 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for easier breathing. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: L 3. Color: White 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire 8. Flavor: Citrus
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for easier breathing. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: L 3. Color: White 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire 8. Flavor: Mint
Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for ear 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: Black diamond 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 95109: Easier breathing and speech with maximum comfort Features 1. Designed to have more room for easier breathing by eliminating discomforts to the nose in exhaling. 2. Keep the face mask at a distance from the lips and mouth, providing more room for easier breathing. 1. Type: Diamond shape, 3-ply, non-sterile 2. Size: M, L 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 72630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features 1. Contains no natural rubber latex protein. 2. Hypo-allergenic compounds for the most sensitive hands. 3. Excellent puncture resistance. 4. Minimize hand pressure & keeping cooler, drier Color: Blue or white Hand former: Textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L, XL Overall length: 245 +/- 5 mm or 290 +/- 5 mm
Code 71630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features 1. Contains no natural rubber latex protein. 2. Hypo-allergenic compounds for the most sensitive hands. 3. Excellent puncture resistance. 4. Minimize hand pressure & keeping cooler, drier Color: Blue or white Hand former: Textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L, XL Overall length: 245 +/- 5 mm or 290 +/- 5 mm
Code 23630: Suitable for bacteria-free operations in general surgical rooms, surgical wards, laboratory, cleanroom. Features 1. Made from natural rubber latex. 2. Excellent chemical-resistance compounded by special treatment. 3. Low protein level-less than 50µg/g. 4. Lowest allergen content.. 5. Excellent han Color: Natural latex Hand former: Textured surface in the grip area, with size embossed Sterility: Sterile or non-sterile Size S, M, L Overall length: 245 +/- 5 mm
