IRON ORE IN BIG VOLUMES, NIGERIA: 1. HAEMATITE IRON ORE SITE 1 - Reserve Estimate : 26,553,534 Metric Tons - Iron Content: 70% - S.G: 4.05 2. HAEMATITE IRON ORE SITE 2 - Reserve Estimate : 29,433,844 Metric Tons - Iron Content: 72% - S.G: 4.2 3. MAGNETITE IRON ORE Reserve Estimate : 243,838 Metric Tonnes - Iron Content: 60.8%� -� S.G:� 5.0
Iron Ore
Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on â??Iron Concentrate Particlesâ?? will summarize the progress achieved in the last five years.
Our iron ore pellets and fines are made from magnetite and have high iron ore content â?? pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines. Using pellets instead of sinter (slightly larger pieces of iron ore) in customersâ?? pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customersâ?? ironmaking processes.
Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuously passing high frequency electric current across the edges. The welded steel pipes are then passed through sizing sections where any dimensional deviations are corrected. The pipes are then cut into desired lengths by automatic cutting machines. The tubes are then pressure tested for any leaks randomly. The galvanization and varnishing of pipes are done as per specific requirements.The GI Pipes are generally used for distribution of treated or raw water in rural or urban areas. These pipes are cheaper, light weight and easy to handle.
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
We offer Hermatite Iron Ore Fe 65% and Magnetite Iron Ore 50% from Nigeria. Price between 300 -320 U.S. Dollars F.O.B. from Lagos,Apapa Port.
Grade C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,C10930, C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300,C12500,C14200, C14420,C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,C26000, C27000,C27400,C28000,C33000,C33200,C37000,C44300,C44400,C44500,C60800, C63020,C65500,C68700,C70400, C70620,C71000,C71500,C71520,C71640,C72200 T1,T2,T3,TU1,TU0,TU2,TP1,TP2,TAg0.1, Shape Flat plate Temper O-H112; T3-T8; T351-T851 Size thickness 0.3mm~100mm; Width 50mm~2500mm; Length 1000mm~12000mm Surface Mill finish, polished, anodizing, brushing, sand blasting, powder coating,etc Payment terms T/T,L/C,western union, Paypal Price terms CFR,FOB,CIF,Ex-work,CNF Application 1)Further making utensil. 2)Solar reflective film 3)The appearance of the building 4)Interior decorating:ceilings,walls,etc. 5)Furniture cabinets 6)Elevator decoraction 7)Signs,nameplate,bags making. 8)Decorated inside and outside the car 9)Household appliances:refrigerators,microwave ovens,audio equipment,etc. 10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.
- Ironing Type: Dry Ironing + Spray - Three levels of temperature: 100C/120C/140C - Using Time: 100C-38min, 120C-34min, 140C-30min, - Hot in 30s - One-touch spray, put on after ironing - Water Tank Capacity: 30ml - Power Bank Function - Battery : 5000mAh, Rechargeable - Charging Time : 3h - Charging by USB - Ironing time : 30mins to 38mins based on different Temp - Product Size : 85 x 80mm - Product Weight : 360g
Iron Tubes, Pipes, Angles, Channels Etc..
Factory Direct Sell 201 304 316 6 inch welded stainless steel pipe Stainless steel welded pipes/tubes AISI 430 409L 441 436 444 different kinds of stainless steel welded pipes/tubes construction manufacturer welded stainless steel exhaust pipe 409 441 439 Supply ASTM 304 410 430 440 441 Seamless Stainless Steel tube pipe With Low Price 446 410 420 409L 441 436L stainless steel welded pipe for exhaust Good Prices SS Tube 420 431 439 441 443 Stainless Steel pipe 1.4307 Top sell high quality 441 stainless steel welded pipe per meter price 1 buyer Supply China ASTM 441 Seamless Stainless Steel tube/pipe With Low Price 304 316 321 Supply ASTM 441 Seamless Stainless Steel Tube/Pipe With Low Price
Iron Oxide Black 330 Color Index: Pigment Black 11 C.I. No.: 77499 CAS No.:12227-89-3 EINECS NO.:235-442-5 Molecular Formula: Fe3O4 Molecular Weight: 231.54 Iron Oxide Black 330 Properties Ferro ferric oxide, chemical formula Fe3O4. Commonly known as the iron oxide black, magnets, magnet, black iron, with the black crystal magnetic, so it is also called magnetic iron oxide. Redone Impex Iron Oxide Black 330 is a common iron oxide pigment used in developing building materials, paints, rubber, asphalt, sports racetracks, paper, plastic and others.
Product Name: Iron Oxide Yellow 313 Color Index: Pigment Yellow 42 C.I. No.: 77492 CAS No.: 51274-00-1 EINECS NO.:275-098-5 Molecular Formula: Fe2O3.H2O Molecular Weight: 177.71 Iron Oxide Yellow 313 Properties Iron Oxide yellow 313 main content is the ferric oxide, iron oxide yellow chemical formula Fe2O3.H2O, is one of the iron oxide hydrates. Redone Iron Oxide Yellow 313 is a common iron oxide pigment used in developing building materials, paints, rubber, asphalt, sports racetracks, paper, plastic and others.