Technical specifications ParameterSpecification Flow rate:1 -500ml/h (1ml/h increments) Target infused volume:0~9999ml (0.1ml increment) Infused volume:0~9999ml (0.1ml increment) Accuracy:Flow rate +/-10% according to the clinical setting Alarms:Infusion finish, no fluid detected, low battery, operation error Power source:Ac power supply: ac 100 -240v +/-10% Built-in lithium battery: rechargeable. 11.1v, 2000mah, Approximately 5 hours of continuous operation on a new and fully charged battery at 25ml/h Power consumption:
Specifications Pumping Mechanism Curvilinear peristaltic Enteral Feeding Set Standard enteral feeding set with silicon tube Purge, Bolus Purge when pump stops, bolus when pump starts, Infusion Mode mlh
Infusion pump :znb-xd Launched in 1994, the first chinese-made infusion pump . m, low pressure Additional features: Real-time shift totals, automatic power switching, mute button, bolus, system malfunction Air-in-line detection: Ultrasonic detector Data interface port of infusion management system: Optional Power supply, ac: 110/230 vac, 50/60 hz, 20 va Battery :9.6+-1.6v, rechargeable Batterylife: 3 hours at the 30 ml/h Working temperature: 10-40 degree centigrade Relative humidity: 30-75% Atmospheric pressure: 700-1060 hpa Size: 174*126*215 mm Weight: 2.5 kg Safety classification: Class i, type bf International standard packing . Size :174*126*215mm Weight:2.5kg
Infusion pump, syringe pump, laryngoscope, defibrillator, aed.
Syringes, electric syringe pump, sterile hypodermic syringe for single use, single infusion set, medical gloves, surgical gloves, obstetric gloves, sterilization pouches..
Safety Slide Insulin Syringe EO Sterilization Refer Standards EN ISO 8537:2007 Sterile single-use syringes, with or without needle, for insulin. EN ISO 9626:1991 / AMD. 1: 2001 Stainless steel needle tubing for the manufacture of medical devices AMENDMENT 1. ASTM F88/F88M-09 Standard Test Method for Seal Strength of Flexible Barrier Materials. ASTM F1140/F1140M -13 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages. ISO 10993-7:2008 Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals. USP 37- NF32 2014: U.S. Pharmacopeia National Formulary.
Description/ specification of 200ml syringe: backed by the team of experienced work force, we offer a wide range of optimum quality 200ml syringe. These are manufactured under highly strict measures in order to maintain its compliance with the well-defined quality standards. Moreover, clients can obtain these 200ml syringes from us at most competitive price.
Tshirts for men and women , jackets , leathe jackets , silk garments , dressing gowns and bathrobes of wool and cotton , night dresses and pyjamas , womens vests , briefs , panties , lingeries , night dresses, pyjamas, pants , hareem pants , caps , copper bottles , medical equipments and supplies to hospital like pulse oximeter , glucometer , bp apparatus , ecg machines , syringe pumps , injections , thermometers , gloves , laboratory kits like malaria cards , trop t and trop i cards , hiv cards , hbs ag cards ,lab equipments , orthopedic implants , artificial teeth , artificial joints , ct scan machines , mri machines , ultrasound machines , anaesthetic equipments , boyles appaaratus , suction apparatus, ppe kits.
Infusion pump, syringe pump, feeding pump.
Insulin Syringe EO Sterilization Refer Standards ISO 9626: 1991 + AMENDMENT 1 2001 Stainless steel needle tubing for the manufacture of medical devices. ISO 8537:2007 Sterile single-use syringes, with or without needle, for insulin. ISO 10993-7:2008 Biological evaluation of medical devices - Part 7 : Ethylene oxide sterilization residuals. ASTM F 1140/F 1140M-13 Standard test methods for internal pressurization failure resistance of unrestrained packages. USP 37-NF 32 Bacterial Endotoxins Limit. ISO 11737-2:2009 Sterilization of medical devices - Microbiological methods - Part 2: Test of sterility performed in the definition, validation and maintenance of a sterilization process. ISO 11135-1:2007 Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices.
Infusion pump, anesthesia pump, ecg, feeding pump, vet infusion pump, nutrition pump, syringe pump, double-syringe pump, stackable syringe pump, vet syringe pump, disposable syringe, and disposable infusion set.
Medical infusion pump, precision syringe pump, infusion syringe pump, micro syringe pump.OEM
1 Minoxidil Hair growth 2 Allantoin IP/BP/USP Skincare 3 Triclosan Anti-bacterial Chlorphenesin Cosmetic additive 4 Piroctone Olamine Anti dandruff 5 n-Butyl Resorcinol Skin Lightening/anti blemish 6 2-Ethyl Hexyl Palmitate Emollient 7 Iso Propyl Oleate Emollient 8 Neopentylglycol Dicocoate Lubricant 9 Neopentylglycol Dioleate Lubricant 10 Pentaerythritol Tetraoleate Lubricant 11 Ethylhexylglycerin Preservative 12 5-chloro-2-(2, 4-dichlorophenoxy) phenol Anti-bacterial 13 4-chloro-3,5-dimethylphenol Anti bacterial 14 N, N-dimethyl-N-[2-[2-[4-(1, 1, 3, 3- tetramethylbutyl)phenoxy]ethoxy]ethyl]a mmonium chloride Anti-bacterial 15 Sodium Lauroyl Lactylate Surfactant foam booster 16 Cetyl Pyrimidine Chloride 17 2-Ethyl Hexyl Oleate / Palmitate / Stearate Emollient/Lubricant 18 Zinc Citrate Trihydrate Antimicrobial/Antiplaque 19 Benzethonium Chloride Antimicrobial/Preservative 20 Zinc Pyrithione 50% FPS Anti dandruff HERBAL/NATURAL PRODUCTS Tetra Hydro Curcuminoids anti-aging, skin lightening, and suncare Carrot root ferment filtrate Skin, scalp and hair health Radish root ferment filtrate Skin, scalp and hair health Rice Ferment Filtrate Skin and hair moisturization Onion Extract Hair growth Hibiscus extract Hair growth Aloe Vera Skin care
OEM peristaltic pump with DC12V/DC24V motor flow rate 2280ml/min Peristaltic pump :OEM201/YZ1515x Pump head: YZ1515x Motor: DC 12V or DC 24V Silicone tube: 13# 14# 19# 16# 25# 17# 18# Max flow rate 2280ml/min
CE Pumps Constructional Features 'CE' pumps are dimensionally conforming to ISO:2858 and DIN 24256. These pumps are horizontal, radially split, single stage, centrifugal end suction volute with top centerline delivery. The pump feet are integrally cast with the Delivery casing. The Impeller is of an enclosed type. The Bearing housing is fitted with a support foot. The pump shaft is supported by grease lubricated antifriction ball bearings as a standard scope of supply. Models : Following models are available in 'CE' Pump series. Unit-30 --------- Unit-40 --------- Unit-50 32/20 ----------- 40/26 ----------- 25/32 40/13 ----------- 65/16 40/20 50/13 Application Of CE Pumps * Water supply * Fire Fighting * Sprinkling * Irrigation * Air conditioning * Brine * Light chemicals * Drinking water * Industrial water * Cooling water * Swimming pool water * Condensate * Hot water * Clear juice.
Actuators, Pumps, Valves, Syringes, Solenoids.
Plastic garden submersible pump Operating Condition: Fluid temperature up to 35 Centigrade Maximum ambient temperature 40 Centigrade. Maximun particale: 30mm for dirty water type Maximun particale: 5mm for clean water type Structural Charactristics: * External float switch for automatic pump operation. * Pump body made from fiber glass reinforced technopolymer, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body. * Technopolymer open impeller. * Suction strainer made from fiber glass reinforced technopolymer, providing the support base for the pump. * Technopolymer hose joint with screw fitting. * C45 steel motor shaft. * Double seal carbon/aluminum on the pump side and sealing ring on the motor side. * Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector). * Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself) * Protection rating IP 68 * "H05/07 RN-F" Neoprene submersible supply cable. * Supplied standard with 10 meters of cable and plug. * Voltage and frequency available on request. * 220V/50Hz, 220V/60Hz, single phase * copper wire stator with thermal protector Insulation class B, Protection IP44, Continuous duty . Certification: 1. CCC Safety certificate 2. CE certificate 3. GS certificate. HS Code: 841381 Trademark: Haitaipump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.
Self-priming jet water pump (jsw) Structural characteristics**** A. Pump body: cast iron, with uni iso 228/1 gas threaded suction and delivery openings. B. Motor bracket: aluminum motor bracket, reducing difficulties when starting the pump after long periods without use, due to the impeller blocking. C. Ejector union: approved for drinking water. D. Impeller: brass with centrifugal radial flow type E. Motor shaft: anti-rust motor shaft F. Mechanical seal: ceramic and graphite. G. Motor: the pumps are coupled to an asynchronous, high efficiency toyoo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty. Insulation class b. The thermal cutout relay motor protector is incorporated in single phase motors. Three phase motors require an adequate external motor protector, with connections according to current standards. H. Protection: ip 44.
Digp-7023/7043-60hz (patented) 1.Available with 2.7.5 hp grinder pump 3.High head, double stage 4.Doubled output pressure 5.Unmatched performance 6.350 shut-off head 7.Flows to 100 gpm 8.Balanced design 9.Ideal for long discharge runs or high static 10.Heads 11.Potentially replaces higher hp pumps 12.Ductile iron impeller, recessed, clog-free 13.Silicon carbide seals !v grit resistant
Peristaltic pump, syringe pump, dosing pump, dispensing pump.
