SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it is suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
ProductSocket head allen caps screws BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating46 based on 32 reviews priceStart from 5 USD Dimension range 516 M6 up to 4 M100 for all grades Stainless Steel Socket Head Allen Caps Screws 304 B8 316B8M 316 L 316Ti 317 L 310 321H B8T 347H B8C SS 410 B6 904 L UB6 A453 GR 660 ABC amp D Duplex amp Super Duplex Steel Socket Head Allen Caps Screws UNS S31803 1UNS S32205 F 51 UNS S32750 F 53 UNS S32760 F 55 UNS S31254 SMO 254 High Nickel Alloys Socket Head Allen Caps Screws Monel 400 Monel K 500 Incoloy 600 Incoloy 625 Incoloy 800H Incoloy825 Incoloy 718 Inconel X 750 Alloy 20 CB 20 Hastelloy C 276 Hastelloy C 22 HastelloyC4 Other Alloys Titanium Gr 2 Titanium Gr 5 Aluminium Bronze AB 2 Phosphorous Bronze PB Test Certificate Mill Test Certificate as per EN 10204 31 nbsp Types Of Socket Head Allen Caps Screws SS 310 310S Socket Head Allen Caps Screws Duplex Steel UNS S31803 Socket Head Allen Caps Screws Stainless Steel 304 304L Socket Head Allen Caps Screws Duplex Steel Socket Head Allen Caps Screws Stainless Steel 316 316L Socket Head Allen Caps Screws Duplex Steel UNS S32205 Socket Head Allen Caps Screws Stailess Steel 321 321H Socket Head Allen Caps Screws Super Duplex UNS S32750 Socket Head Allen Caps Screws Monel 400 Socket Head Allen Caps Screws Hastelloy C276 Socket Head Allen Caps Screws SS Socket Head Allen Caps Screws Steel Socket Head Allen Caps Screws Inconel 625 Socket Head Allen Caps Screws Alloy 20 Socket Head Allen Caps Screws CuNi 7030 C71500 Socket Head Allen Caps Screws CuNi 9010 C70600 Socket Head Allen Caps Screws ASTM A105 Socket Head Allen Caps Screws ASTM A350 LF2 LF3 Socket Head Allen Caps Screws Inconel 600 Socket Head Allen Caps Screws Hastelloy B2 Socket Head Allen Caps Screws SS 317 317L Socket Head Allen Caps Screws Super Duplex Socket Head Allen Caps Screws SS 347 Socket Head Allen Caps Screws Super Duplex UNS S32950 Socket Head Allen Caps Screws Monel K500 Socket Head Allen Caps Screws Hastelloy C22 Socket Head Allen Caps Screws Stainless Steel 446 Socket Head Allen Caps Screws ANSI Socket Head Allen Caps Screws Inconel 718 Socket Head Allen Caps Screws 904L Socket Head Allen Caps Screws Incoloy 800 Socket Head Allen Caps Screws Titanium Gr 2 Socket Head Allen Caps Screws Incoloy 825 Socket Head Allen Caps Screws Titanium Gr 5 Socket Head Allen Caps Screws RFP India is Indias wellknown manufacturer supplier and exporter of Socket Head fastener which is also known as a screw or bolt It is a type of fastener characterized by a helical ridge recognized as a male thread external thread or just thread which is being wrapped around a cylinder The most common uses of stainless steel socket head are to hold objects together and to position objects SS Threaded fasteners either have a tapered shank or a nontapered shank Fasteners with
Sugar icumsa 45, sugar 600/1200, yellow corn gmo/non gmo, soybean gmo/non gmo, iron ore, manganese ore, copper.
Refined Sugar Icumsa 600/1200 of Brazilian Origin: Quantity: Spot Buy Price: $390/MT Quantity: 25,000MT Price: $385/MT Quantity: 50,000MT Price: $375/MT Quantity: 100,000MT Price: $375/MT Quantity: 200,000MT Price: $370/MT Quantity: 300,000MT Price: $370/MT Acceptable Payment Methods: LC/DLC/SBLC, Transferable and Non -Transferable, Irrevocable, with payments at Port of Loading as well as Port of Discharge (Prices May Vary).
Product:Hex bold and hex screws Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.5, based on� 54� reviews price:Start from� 50� USD RFP India is Indiaâ??s well-known manufacturer, supplier and exporter of Hex Bolt and Hex Screws industrial fasteners in carbon steel, stainless steel, nickel alloy and alloy steel grades in a range of sizes and shapes. The differences between these fasteners are somewhat important both from a manufacturing viewpoint and application point of view. Hex screws are used in specific applications such as in OEM setting where tight forbearances are needed, whereas Hex bolts are time and again specified when the mechanical properties are more significant than dimensional tolerances. While Hex Screws will generally be made up by a cold-heading procedure or turned CNC operation, Hex Bolts is the typical bolt that is made up by hot-forging procedure. Dimension range : 5/16\" (M6) up to 4\" (M100) for all grades. Stainless Steel Hex Bolt, Hex Screws Fasteners : 304 (B8) , 316(B8M) , 316 L , 316Ti , 317 L , 310 , 321H (B8T) , 347H (B8C) , SS 410 (B6) , 904 L (UB6) , A453 GR 660 A/B/C & D. Duplex & Super Duplex Steel Hex Bolt, Hex Screws Fasteners : UNS S31803 1UNS S32205 (F 51), UNS S32750 (F 53), UNS S32760 ( F 55), UNS S31254 (SMO 254 ). High Nickel Alloys Hex Bolt, Hex Screws Fasteners : Monel 400 , Monel K 500 , Incoloy 600 , Incoloy 625 ,Incoloy 800H, Incoloy825 , Incoloy 718, Inconel X- 750 , Alloy 20 (CB 20), Hastelloy C 276, Hastelloy C 22, HastelloyC4. Other Alloys Hex Bolt, Hex Screws Fasteners : Titanium Gr 2 , Titanium Gr 5 , Aluminium Bronze ( AB 2) , Phosphorous Bronze (PB). Test Certificate : Mill Test Certificate as per EN 10204 / 3.1 Types Of Hex Bolt & hex Screws â?¢ SS 310 / 310S Hex Bolt & hex Screws â?¢ Duplex Steel UNS S31803 Hex Bolt & hex Screws â?¢ Stainless Steel 304 / 304L Hex Bolt & hex Screws â?¢ Duplex Steel Hex Bolt & hex Screws â?¢ Stainless Steel 316 / 316L Hex Bolt & hex Screws â?¢ Duplex Steel UNS S32205 Hex Bolt & hex Screws â?¢ Stailess Steel 321 / 321H Hex Bolt & hex Screws â?¢ Super Duplex UNS S32750 Hex Bolt & hex Screws â?¢ Monel 400 Hex Bolt & hex Screws â?¢ Hastelloy C276 Hex Bolt & hex Screws â?¢ SS Hex Bolt & hex Screws â?¢ Steel Hex Bolt & hex Screws â?¢ Inconel 625 Hex Bolt & hex Screws â?¢ Alloy 20 Hex Bolt & hex Screws â?¢ Cu-Ni 70/30 (C71500) Hex Bolt & hex Screws â?¢ Cu-Ni 90/10 (C70600) Hex Bolt & hex Screws â?¢ ASTM A105 Hex Bolt & hex Screws â?¢ ASTM A350 LF2 / LF3 Hex Bolt & hex Screws â?¢ Inconel 600 Hex Bolt & hex Screws â?¢ Hastelloy B2 Hex Bolt & hex Screws â?¢ SS 317 / 317L Hex Bolt & hex Screws â?¢ Super Duplex Hex Bolt & he
A nickel-chromium alloy similar to INCONEL alloy 600 but made precipitation hardenable by additions of aluminum and titanium. It has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300F (700C). Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines,rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures.
ASTM Tubes, SS Tubes, 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760), High Nickel Alloy Tubes, supplier. TYPE : SEAMLESS / ERW / EFW / WELDED / CDW RANGE : 6.35 mm OD upto 254 mm OD in 0.6 TO 20 mm thickness. FORM : ROUND, SQUARE, RECTANGULAR, COIL, \'U\' SHAP, PAN CAKE. LENGTH : SINGLE RANDOM, DOUBLE RANDOM & REQUIRED LENGTH ENDS : PLAIN END, BEVELLED END, TREADED OTHER : â?¢ HYDRAULIC TUBE â?¢ CAPILLARY TUBE â?¢ HORN TUBE â?¢ BOILER TUBE â?¢ IBR TUBE â?¢ PRECISION TUBE Stainless Steel Tube : Standard� : ASTM / ASME A/SA 269 / 213 / 249 Grade� : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Duplex & Super Duplex Steel Tube : Standard� : ASTM / ASME A/SA 240 / 790 / 815 / 928 Grade� : 2101(UNS32101) , 2205(UNS 32205/31803) , 2304 (UNS32304) , 2404(UNS 82441) , 2507 (UNS32750) , 4501 (UNS 32760) Aluminium Tubes : Standard� : ASTM B 241 Grade� : 2024, 6061, 6063, 6082 & 7075 Titanium Tubes : Standard� : ASTM B 338/ASME SB 338 /ASTM B 337/ASME SB 337 /ASTM B 861/ASTM B 862 Grade� : Gr1,Gr2,Gr3,Gr7,G9,Gr11, Gr12,Gr16,Gr17 Carbon Steel tubes : ASTM / SA 179 / A 210 GR.A / BS 3059 GR.360 & 440 Alloy Steel Tube : Standard� : ASTM / ASME A/SA 213 Grade� : T1, T5, T9, T11, T12, T22, T91 Copper Alloy Tube : â?¢ Copper Tube : Electrolytic / Dioxide â?¢ Copper Nickel Tube / Cupro Nickel Tube :ASTM / ASME SB 111 UNS NO. C 70600 ( CU -NI- 90/10) / C 71500 ( � � � CU -NI- 70/30) / C 71640 ( CU-NI-66/30/2/2) â?¢Admiralty Brass Tube : ASTM / ASME SB 111 UNS NO. C 44300 ( ALLOY 443) â?¢Aluminium Brass Tube : ASTM / ASME SB 111 UNS NO. C 68700 ( ALLOY 687) TEST CERTIFICATE : Mill Test Certificate as per EN 10204 / 3.1 Types Of Tubes â?¢ SS 310 / 310S SEAMLESS Tubes â?¢ Duplex Steel UNS S31803 Tubes â?¢ Stainless Steel 304 / 304L Tubes â?¢ Duplex Steel SEAMLESS Tubes â?¢ Stainless Steel 316 / 316L ERW Tubes â?¢ Duplex Steel UNS S32205 Tubes â?¢ Stailess Steel 321 / 321H Tubes â?¢ Super Duplex UNS S32750 Tubes â?¢ Monel 400 EFW Tubes â?¢ Hastelloy C276 ERW Tubes â?¢ SS Tubes â?¢ Steel Tubes â?¢ Inconel 625 WELDED Tubes â?¢ Alloy 20 EFW Tubes â?¢ Cu-Ni 70/30 (C71500) Tubes â?¢ Cu-Ni 90/10 (C70600) Tubes â?¢ ASTM A105 Tubes â?¢ ASTM A350 LF2 / LF3 Tubes â?¢ Inconel 600 SEAMLESS Tubes â?¢ Hastelloy B2 Tubes â?¢ SS 317 / 317L Tubes â?¢ Super Duplex WELDED Tubes â?¢ SS 347 ERW Tubes â?¢ Super Duplex UNS S32950 Tubes â?¢ Monel K500 Tubes â?¢ Hastelloy C22 SEAMLESS Tubes â?¢ Stainless Steel 446 Tubes â?¢ ANSI Tubes â?¢ Inconel 718 EFW Tubes â?¢ 904L Tubes â?¢ Incoloy 800 Tubes â?¢ Titanium Gr 2 Tubes â?
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Standard : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Standard : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Product: Brown Sugar ICUMSA 600-1200 Delivery Format: 50 Kg PP bags Price and Delivery Condition: CIF, delivery to port of destination. Price: Negotiable Production - Country of Origin: Brazil Contract period: Contract for two years or more, renewable for the same term. Minimum amount: 25,000 metric tons Total Amount / Contract: Sales contract for one year, with initial delivery of 25,000 to 500,000 Metric Tons. We have a large production capacity to meet the scheduled annual deliveries. Inspection: SGS / access to the port or collection point requested during the assignment of Laycan SGS quality control Payment method: DLC, LC at sight, BG/SBLC with payment against SGS certificate, issued at the port of shipment. Delivery documents: All product certificates, batch numbers, SGS, delivery schedule
ASTM B564 Inconel 600 Weld-Neck Flange-A-B, ASTM B564 Inconel 600 Forged Flange, UNS N06600 Swrf Flange, JIS NW 600 Lap-Joint Flange, UNS N06600 RTJ Flange, ASTM B564 Inconel 600 Square Flange, UNS N06600 Loose Flange, DIN 2.4816 Sorf Flange, JIS NW 600 Slip-On Flange.