Voltage: 220-240V/50Hz Power: 50W Material: PP Timer: 7.5 Hours Speed: 3 Speeds Mode: Sleep/Nature/Normal 100% copper motor Remote control Oscillation
Voltage: 220-240V/50Hz Power: 50W Material: ABS body Timer: 7.5 Hours electronic type Speed: 3 Speeds Mode: Sleep/Nature/Normal With LCD display 100% copper motor 5m remote control with button cell Synchronous motor oscillation
Car cooling fan universal electric 9" 24v 12v condenser car fan 1. 4 inch Dameter 5 pcs ABS fan 2.with two head fan,two speed control 3.fixed by two pcs of super glue cushion 4. with speed regulation switch 5. with oscillating controller 6. operated by 12v or 24v DC (optional) 7. color box size:27*11.5*13CM 7. use in a car, bus, truck, plane, RV, boat Note 1.After open the packing,please properly handle bags in order to avoid chinldren or pets suffocation. 2.Before use,pls place the fan smoothly. 3.Please do not place in much soot,dustplaces for using. 4.Do not use the fan pointed directly at the fire or gas for blowing,Do not put any metal or flammable items into the product,in order to avoid trouble and fires. 5.Do not use at places where near fire or has the high temperature,waste paper,scrap metal. 6.Do not dip part of fan or the whole machine into water for cleaning,when using in the outdoor if there is thunder,please stop immediately,in order to avoid electric shock and fire. 7.The baby under adult supervision for using ,please keep infants and young children far away from dry battery. 8.When cleaning,please do not directly spray the detergent to the fan,in order to avoid damaging the plastic parts.
Highly efficient 3-phase Air Cooled motor - 100% EC grade copper winding - Easily Rewindable - Good suction lift characteristics - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Double shielded ball bearings, so no need of external lubrication - Mechanical seal or stuffing box is provided as per customers requirement - Zero maintenance Product Specification Power Range : 1.0 HP to 10.0 HP Operating Speed : 0 2890 RPM Operating Frequency : 0 - 50 Hz Input Solar DC Power Range : 900 Wp, 10000 Wp Input Solar DC Voltage Range : 110 Vmp, 600 Vmp Head Range : 10 Mtr, 50 Mtr Discharge Range : 45000 LPD - 405000 LPD Max. Suction Head : 7 Mtr Type of Duty : S1 Material Of Construction Part Grade Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
We take immense pleasure to introduce ourselves as a trusted and reputed manufacturer and supplier of Square Cooling Tower. It is used in power plant, chemical, pharmaceutical and petrochemical industry as heat exchanger. The main aim of the tower is to reduce the temperature of water by bringing air and water into direct contact with each other. To manufacture this tower our dexterous workforce uses finest quality FRPs. Square Cooling Tower comes in different sizes and specifications as per the requirements of clients. Features: Resistant to corrosion Low power consumption Generate low noise Range from 15 TR to 1500 TR in single cell & capacity can be increased further by Multi-cell cascade. Full FRP Body Structure available in both MS HDG and FRP Pultruded Profile. Water distribution: PVC with FRP Lining. High space efficient. Inspection window is Provided. Very low drift loss Easy to Maintain. Part load operation is available.
Frp cooling towers machine-made frp corrugated plate and flat plate is a kind of plate produced by automated machine could be replaced with corrugated wall panel and flat bottom water trough plate plastered by hand. Automated machine production makes the selection of engineering design and user unit more flexible and practical, and will reduce the delivery time of frp cooling tower manufacturing , and the installation by the installation unit will be more convenient, which effectively improves frp cooling towers product quality and production efficiency, lowers production cost, reduces the production workload of frp cooling tower by about 70%, and saves the workload of cooling tower production workers and large amount of factory site. The corrugated plate and chassis flat plate outside of the cooling tower could adopt high-strength, corrosion-resistant and water-resistant frp plates; the corrugated plate and flat plate of different sizes, specifications and colors can be customized according to special requirement. Application: Zhongsheng frp cooling tower panel is specifically designed as a cladding solution for cooling tower. An ideal cooling tower panel High mechanical strength: composite of high-strength alkali-free glass fiber materials (as reinforcing materials) and unsaturated polyester resin, covered with m-benzol neopentyl glycol corrosion-resistant and water-resistant gel coat, featuring good weather resistance, mechanical strength and shock resistance. -light weight, -high corrosion resistance, -excellent weathering characteristics, -high-impact resistance - water-resistant -easy to repair - high mechanical strength - shaking resistance.
Fulltech electric co., ltd, most professional ac fan developer and manufacturer in taiwan, looking for distributor. Our full ac axial fan series is for industrial, commercial, even home appliance use for cooling/ventilation, ul/tuv/ce approved insulation class a to h ip54/55 rated thermal/impedance protection low speed signal or alarm available.
Fulltech Electric Co., Ltd, most professional AC fan developer and manufacturer in Taiwan, looking for distributor. Our full AC axial fan series is for industrial, commercial, even home appliance use for cooling/ventilation, UL/TUV/CE approved Insulation Class A to H IP54/55 rated Thermal/Impedance Protection Low speed signal or alarm available.
Operation temperature:-10 to 70degree(humidity 35%-85%rh) Storage temperature:-40 to 80 degree(humidity 35%-85%rh) Origin:shenzhen, china Package:carton package Weight:6g Item no: dfs201005h Frame size: 20x20x10mm Voltage: 5 (v) Current: 0.2 (a) Power: 1.5 (w) Speed: 18000rpm) Air flow: 1.22(cfm) Pressure: 5.22(mmh2o)) Noise: 39.45(dba) We can provide brushless dc fans and inductive ac fans - size from 15~254mm, thickness from 6~89mm Voltage from dc 3.3v, 5v, 12v, 24v, 48vto ac 110v, 220v, and dual voltage, ball, sleeve or hybrid, wire lead or Terminal, auto restart protection, locked rotor alarm, speed sensor (tachometer), temperature controlled Speed, heat-sinks are almost always customized.Our products have a low noise, little vibration, temperature Is low, the good performance and reliable operation. Is widely used in automation machinery and equipment, Electronic instrumentation, medical equipment, computer office automation, household appliances and so on. Please contact us for which voltage you need?we will offer you 100% correctly item!! Manufacturer of cooling fan , ac fan , dc fan , blower fan , cpu cooling fan Mobile:0086-18123745751 http://www.Hx-fan.Com skype:hx-fan Carton
Parameter: Bearing type: Sleeve bearing Rating voltage: DC12V Rated voltage: DC6V-13V Start-up voltage: 6V(ON-OFF) Rated-current: 130mA ±10% Rated-speed: 7500RPM ±10
Frp cooling tower, pultruded cooling towers, wooden cooling tower, frp fan assembly, aluminum alloy fan assembly, cooling tower motors, pvc honeycomb fills, drift eliminators, nozzles, distribution systems and treated timber fills. Honey comb pvc fills of all sizes * cross flow fills. Power plant fills * electrical motors for cooling towers * fan blade assemblies (frp & aluminium) , nozzles of all sizes spares, sales & service.
Pos. Number 135.2 Rear Liner 1.4517 used for Andritz S 125-400 DD Centrifugal Pumps. The Rear Liner 135.2 suitable for Andritz S Series, the model: S 80-265, S 100-265, S 125-265, S 100-350, S 125-350, S150-330, S125-400, S 150-400, S 200-380, S 150-470, S 200-470, S 250-430, S 350-470, S 500-600, S 600-700. manufacture a range of replacement parts including impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), casings, casing cover, front lining, rear lining, stuffing box body, shaft etc which for Andritz S series pumps, ACP series pumps, FP series pumps etc
Fans like ceiling fans wall fans and table fans, heavy duty industrial fans i.e tubular man coolers ,pedestal man coolers , tube axial fans, heavy duty exhaust fans .
Cooling tower fan motor Output power: 0.18 to 30kw Power supply: produced by customers' requirements Type: totally fulled water proof Protection: ip55 Insulation class: f Warranty: one year Feature: water proof Usage: cooling tower
Dawang fans function 1. Ventilation Our Fans can promote the air circulation, perfect streamline make users enjoy the 2-4 m/s spatial formula air supply, form the nature breeze system, promoting dispersion of heavy dust, moisture, Co2 and poor air to improve the air quality, create a healthy, dry and safety work environment, enhance the work efficiency 2.Convenient Adopted the latest frequency conversion stepless speed control system, convenient to use. Humanized operation interface make users to enjoy the beauty of science and technology of life 3.Drying:Large air volume promote air flow effectively, make moisture well disperse and decrease the problems appear probability such as bedbug, mycete and so on 4.Elegant and durable:After complex surface treatment, the fan can avoid cleaning. The fan life can more than 10 years. 5.save energy and reduce consumption:The rated power of whole machine is 1.5kw, which can cover more than 1400m2 area, energy consumption is only 0.8 KWH. Compared with small powerful fans and high-power air conditioners, which reduces your costs greatly
Frp cooling towers machine-made frp corrugated plate and flat plate is a kind of plate produced by automated machine could be replaced with corrugated wall panel and flat bottom water trough plate plastered by hand. Automated machine production makes the selection of engineering design and user unit more flexible and practical, and will reduce the delivery time of frp cooling tower manufacturing , and the installation by the installation unit will be more convenient, which effectively improves frp cooling towers product quality and production efficiency, lowers production cost, reduces the production workload of frp cooling tower by about 70%, and saves the workload of cooling tower production workers and large amount of factory site. The corrugated plate and chassis flat plate outside of the cooling tower could adopt high-strength, corrosion-resistant and water-resistant frp plates; the corrugated plate and flat plate of different sizes, specifications and colors can be customized according to special requirement.
