General Specification Material : PVC, ABS, PET Dimension : Credit size 85.5*54mm Thickness : 0.86mm Lamination : Glossy, matte, frosted surface Crafts available : Silver/gold foil, laser foil, UV oil, silver/gold glitter Hole punching, silver/gold stock Magnetic stripe, barcode, signature panel, scratch strip Chip Parameter Chip : I CODE 2 / I CODE SLI / I CODE SLIX-L Type : Contactless smart card Frequency : 13.56mhz Memory : 1024bits Read Distance : 2.5 - 10cm Reaction Time : 1 - 2ms Protocal : ISO15693A Write Endurance : Over 100000 times Data Retention : Over 10 years
Access the smart digital door lock : 1) Fingerprint (up to 80 sets) 2) Pin code / Password (up to 50 sets) 3) RF Tag (included 2 unit per lock, up to 50 units) 4) Mechanical key (included 2 keys per lock) Enhanced Safety Function: 1. Master code function - Any function change must input the master code first. The master code correctly and then going to next step. 2. Easy setting and equipped with voice guide. 3. Break in / Damage alarm - The lock will alarm if the intruder attempt to forced unlocking the lock. 4. Wrong-try lock out - Lock stops operating for 2 minutes with 5 invalid code attempts. Automatics unlocking when input pin code correctly. 5. Low voltage warning - The low voltage signal will show on lock when the batteries power is running low. 6. Emergency power supply - Used the power bank by USB type C interface to re-working the lock. 7. Garbled function - Continuous input any code, as long as correct code been included and then input "#", the lock be open. 8. Biometric fingerprint sensor - Accurate detection of fingerprint ridges and valleys increase the speed and reliability of unlocking. 9. Keypad panel - The keypad panel was made by ABS and screen protects from punches and scratches. 10. Handle lock design - Prevents break-ins from the peephole and unlocking by children or pets. Specification as below : - The Smart Digital Door Lock size: Outer body (L. x W. x D.) : 32cm x 4.2cm x 2.6cm Inner body (L. x W. x D.) : 32cm x 4.2cm x 2.6cm - Smart door lock include accessories : RF Tag - 2 Pieces Mechanical Key : 2 Keys Install accessories : 1 Sets of accessories. - Type of door : Wooden, Stainless Steel, Iron and Brass etc.. - Suitable for door thickness : 45mm ~ 120mm - Door lock backset : 60mm - Power : DC 6V AA (LR6) Alkaline batteries x 8 pieces - Gross weight : 2.80KG.
Access the smart digital door lock : 1) Fingerprint (up to 80 sets) 2) Pin code / Password (up to 50 sets) 3) RF Tag (included 2 unit per lock, up to 50 units) 4) Mechanical key (included 2 keys per lock) Enhanced Safety Function: 1. Master code function - Any function change must input the master code first. The master code correctly and then going to next step. 2. Easy setting and equipped with voice guide. 3. Break in / Damage alarm - The lock will alarm if the intruder attempt to forced unlocking the lock. 4. Wrong-try lock out - Lock stops operating for 2 minutes with 5 invalid code attempts. Automatics unlocking when input pin code correctly. 5. Low voltage warning - The low voltage signal will show when the batteries power is running low. 6. Emergency power supply - Used the power bank by USB type C interface to re-working the lock. 7. Garbled function - Continuous input any code, as long as correct code been included and then input "#", the lock be open. 8. Biometric fingerprint sensor - Accurate detection of fingerprint ridges and valleys increase the speed and reliability of unlocking. 9. Keypad panel - The keypad panel was made by ABS and screen protects from punches and scratches. 10. Handle lock design - Prevents break-ins from the peephole and unlocking by children or pets. Specification as below : - The Smart Digital Door Lock size: Outer body (L. x W. x D.) : 32cm x 4.2cm x 2.6cm Inner body (L. x W. x D.) : 32cm x 4.2cm x 2.6cm - Smart door lock include accessories : RF Tag - 2 Pieces Mechanical Key : 2 Keys Install accessories : 1 Sets of accessories. - Type of door : Wooden, Stainless Steel, Steel and Brass etc.. - Suitable for door thickness : 45mm ~ 120mm - Door lock backset : 60mm - Power : DC 6V AA (LR6) Alkaline batteries x 8 pieces - Gross weight : 2.80KG.
In the contemporary landscape, India stands as a prominent exporter of diverse food and agricultural products. Notably, there has been a remarkable surge in the export of pulses from India in recent years. The year 2018-2019 witnessed the export of approximately 2.70 lakh tonnes of pulses, valued at Rs. 1679.98 crores. VSR emerges as a highly regarded importer of pulses from India, specializing in various varieties such as chickpeas, peas, kidney beans, soybeans, and more. As a leading pulses exporter in India, VSR prioritizes the delivery of fresh products within the stipulated time frame. Our extensive global connections facilitate a seamless and hassle-free export process for Indian pulses. Committed to transparency in our services, we are always ready to assist clients with any concerns they may encounter. Our vision extends beyond mere export â?? we aspire to disseminate the richness of Indian pulses and other products to every corner of the world through our dedicated services. For those seeking to import pulses from India, VSR is your trusted destination! Purity: We prioritize the delivery of pulses in their purest form, free from contaminants or adulterants. Rigorous quality control measures are implemented to guarantee the integrity and authenticity of our pulse varieties. Nutritional Value: VSR recognizes the significance of pulses as a rich source of essential nutrients. Our commitment to quality extends to preserving the nutritional value of each pulse, ensuring that consumers receive the health benefits associated with these valuable legumes. Freshness: We understand the importance of freshness in pulses. Through meticulous sourcing and storage practices, we ensure that our pulses reach their destination with their inherent flavors and textures intact, contributing to a delightful culinary experience. Ethical Sourcing: Pisum Foods is dedicated to ethical and sustainable sourcing practices. We work closely with trusted growers and suppliers, promoting fair practices and supporting the communities involved in pulse cultivation. Stringent Quality Checks: Before reaching our clients, every batch of pulses undergoes comprehensive quality checks. This rigorous evaluation ensures that only pulses meeting our stringent quality standards are exported, maintaining consistency and reliability. Packaging Excellence: To safeguard the quality of our pulses, we invest in superior packaging. Our packaging is designed to protect the pulses from external factors, preserving their freshness and nutritional content until they reach the end consumer. Variety and Selection: VSR offers a diverse range of pulses, including chickpeas, peas, kidney beans, soybeans, and more. Our emphasis on variety allows consumers to access a broad spectrum of flavors and nutritional profiles, catering to diverse culinary preferences.
Access the smart digital door lock : 1) Fingerprint (up to 200 sets) 2) Code / Password (up to 50 sets) 3) RF Tag (up to 100 units, included 2 units per lock) 4) Mechancial key (included 2 keys per lock) Enhanced Safety Function: 1. Master code function - Change any function must input the master code first and then go to next step. 2. Break in / Damage alarm - The lock will sound if the intruder attempt to force open the lock. 3. Wrong-try lock out - Lock stops operating for 3 minutes with 5 invalid code attempts. 4. Low voltage warning - The lock will sound when the battery power is running low. 5. Emergency power supply - Used the power bank by Misco USB interface to re-working the lock. 6. Garbled function - Continuous input any code, as long as correct code been included and then input "#", the lock be open. 7. Voice guide - Voice guide will walk you through the whole process. You can simply use the touchscreen to add and delete user on the device. 8. OLED display and Door Bell installed. Specification as below : - The Smart Digital Door Lock size: Outer body (L. x W. x D.) : 232mm x 72mm x 73mm Inner body (L. x W. x D.) : 232mm x 72mm x 73mm - Suitable for door thickness : 35mm ~ 60mm - Backset : Small mortise : 60mm / Tubular latch : 60mm / 70mm - Power : DC 6V AA (LR6) Alkaline batteries x 4 pieces - Package : Carton box dimensions : 300mm x 270mm x 100mm Weight : 2.20KG. Price and Minumum Quantity Price FOB in USD: 69.00Minimum Order Qty: 100 Quarts Production Capacity: Per Carton : 0.021CbmPackaging: Packed Smart Digital Door Lock Into A Carton Box. The Dimensions : 700Mm X 300Mm X 100Mm Sample: Available. Sample Cost Born By Buyer Product Model And Origin Brand: MINGSModel: ST2 Seller Code: Smart digital door lock st2HS Code: 83014000 Standards: Standard Competitive Advantages Over 100,000 times running test by testing machine Reliable Stable Manufacturer supply directly Other Details Fingerprint Code / password Rf tag Mechancial key
Access the smart digital door lock : 1) Fingerprint (up to 200 sets) 2) Code / Password (up to 50 sets) 3) RF Tag (up to 100 units, included 2 units per lock) 4) Mechanical key (included 2 keys per lock) Enhanced Safety Function: 1. Master code function - Change any function must input the master code first and then go to next step. 2. Break in / Damage alarm - The lock will sound if the intruder attempt to force open the lock. 3. Wrong-try lock out - Lock stops operating for 3 minutes with 5 invalid code attempts. 4. Low voltage warning - The lock will sound when the battery power is running low. 5. Emergency power supply - Used the power bank by Micro USB interface to re-working the lock. 6. Garbled function - Continuous input any code, as long as correct code been included and then input "#", the lock be open. 7. Voice guide - Voice guide will walk you through the whole process. You can simply use the touchscreen to add and delete user on the device. 8. OLED display and Door Bell installed. Specification as below : - The Smart Digital Door Lock size: Outer body (L. x W. x D.) : 23.2cm x 7.2cm x 7.3cm Inner body (L. x W. x D.) : 23.2cm x 7.2cm x 7.3cm - Suitable for door thickness : 35mm ~ 60mm - Backset : Small mortise : 60mm / Tubular latch : 60mm / 70mm - Power : DC 6V AA (LR6) Alkaline batteries x 4 pieces - Package : Carton box dimensions : 70cm x 30cm x 10cm Weight : 2.20KG.
Technical Advantage 1 The System is made of communication command, electronic maps, video transmission, computer network, monitoring and management features,so that it can make real-time and continuous monitor,command and management of the moving objects on the land, sea and air 3D wide-area space, 2 The System uses advanced video image digital compression technology, can have a high-speed transmission of video images by wireless mobile communication channel 3 Optimized system integration management software, implement and improve the ability of decision support and command function in relevant field, improve the ability to respond quickly to incidents. Function: Video surveillance and voice intercom function Remote control function Alarm triggering the transfer Serial data acquisition and transmission GPS positioning and trajectory search The remote SMS sending and parameter configuration functions Specification Video Input: 1 channel analog video input Audio Input: 1 channel MIC input Audio output :Built-in speaker, support for external headphones Alarm Input: 1 channel alarm input, realize by alarm button GPS positioning: built-in GPS positioning module Local video / image capture:Support SD card storage, realize by video / capture button Local video display:Show Equipment management menu on screen, built-in LCD-TFT color display with a resolution of 320x240 OSD control menu 186;operate by Equipment management menu on the LCD screen Network Communication:wireless network communication, support the EVDO WCDMA,TDSCDMA WIFI Wireless LAN Communication :supports IEEE802.11b / g Local Wired Network Communications: Support 10/100M interface, with routing function USB Extension Supports external USB devices The Built-in Battery: 7.4V/2200mAh Rechargeable lithium battery Working time R4 hours Standby time: R10 hours Application Achieve and improve the rapid response capability of handling emergencies in the related areas ,play an important part in prevention and security. The National Security Office, Public security, armed police, fire control, civil defense, Offshore rescue, electrical, hydraulic, metallurgy, mining, petroleum, Chemical, construction, docks, inspection and quarantine, urban transport, highway regulatory and other important places. (At the same time,it can meet the demand of home, small business or industry-specific user monitoring applications) Model NO.:AN-81 Certificate: CE,RoHS SDK: Free Service: Pre and After Sale Service Export Markets: Global Trademark: OEM/ODM Packing: Carton Box Origin: Shenzhen China
Feature: 1.High adaptability to various difficulties fingerprint type: no matter they are dry fingers, wet fingers, shallow-texture fingers, rough fingers or others.The an-11s can identify accurately. 2.Strong/powerful function of anti-fake :the an-11s fingerprint reader have only sensor to human dermis, which can reject the artificial fingers. 3.Wide range: work well with dry, wet or rough fingerprints 4.Strong ability of anti-static, suitable for the easy-static dry environment Specification: Location of detection: dermis Ability of identification: identify artificial fingerprint Frr0.01% Far0.0001% Identification speed:
Features: 1.UART communication port 2.Semiconductor live fingerprint identification technology can prevent the fake fingerprints. 3. Optical total reflection fingerprint sensor 4.Achieving fingerprint enrollment and verification at the condition of minimum storage 5.1:N identification and 1:1 verify function. 6.Able to set Safe level, Baud Rate and equipment No. 7.Access to standby situation by instruction control module 8.Able to collect fingerprint and upload its features so as to achieve matching function with current fingerprint Specification: High strength anti-wear: tempered glass Anti-Static: 15KV Image crawl area:20*18mm(0.79*0.71inch) Fingerprint capacity:3000 templates, can expand to 8000 templates FAR:
Feature: 1.High adaptability to various difficulties fingerprint type: no matter they are dry fingers, wet fingers, shallow-texture fingers, rough fingers or others.The an-11s can identify accurately. 2.Strong/powerful function of anti-fake :the an-11s fingerprint reader have only sensor to human dermis, which can reject the artificial fingers. 3.Wide range: work well with dry, wet or rough fingerprints 4.Strong ability of anti-static, suitable for the easy-static dry environment Specification: Location of detection: dermis Ability of identification: identify artificial fingerprint Frr&0.01% Far&0.0001% Identification speed:
Product features Support USB and RS232 interface; Provide an integrated SDK, abundant API interface and command sets; Support operating systems like Windows 2000/XPíóUnix and Linux; Apply semi-conduct fingerprint sensor, with live fingerprint acquisition functions; favorable adaptability to difficult fingers like dry, wet, dirty etc. Embedded high speed DSP processor and independent copyright of fingerprint algorithm, can finish functions as fingerprint acquisition, image processing, image characteristics getting, fingerprint matching etc. Performance indicator FRRú¦í_0.01% FARú¦í_0.0001% Time for logging: í+15kV Sensor life: 1million times Anti-electromagnetic interference indicators: according to IEC 61000-4-3 standard Storable fingerprint capacity: 500 (1000expandible) Communication interface: Standard USB2.0 High speed / standard RS232 (optional) Sensor acquisition sizeú¦29mmí-16mm Effective acquisition pixel: 152í-200 pixels Product components 1. Fingerprint sensor Fingerprint image acquisition 2. Operating lamp( red or blue) The red light is on: suggests that the fingerprint scanner is working The red light is flashing : suggests failure in operation The blue light is on : suggests that PC sends orders to fingerprint scanner for user operation; The blue light is flashing: suggests successful operation. 3. Linkú¿USB interface or RS232 interface Interface for communication with PC
Micro SD memory card, USB flash pen drive, smart bracelet, digital audio video recorder, power bank, automobile power jumber booster, phone cables, power strip, electrical devices.
-function music player/power show/remote control/phone/USB bluetooth link the plug/MP3 / forward/backward/high/low speed can be adjust the volume before and after a key to add and subtract/start/intelligent functions such as slow, double drive 550 big motor, powerful, with independent braking, steering motor, 380 one-to-one 2.4 G wireless remote control liberates child's hands, Three-point seat belt, comfortable oversized backrest, dazzling lights, dynamic music, 12V7AH battery, wheels with PVC silent wheel bar, the body comes with 5 gears length adjustment, 1-3 gears for ch
Multi-function music player, mobile phone remote control/bluetooth link/USB plug/forward/backward/swing/volume and subtract/light switch/button to start, and other functions, intelligent soft start, one-on-one 2.4 G multi-functional remote control device, remote control car can switch, switch mode switch, music and high speed adjustment, 12 v390 all-wheel-drive more powerful, 540 swing motor, 380 steering motor, six-wheel shock absorber, simulation mobile gun head with shelf, can put the water cup can be adjusted up and down the barrel with dazzling lights, two-point safety belt, dynamic music, 12V7AH battery, car rear with large storage space, travel more convenient.
US WAREHOUSE: DDP TO USA Specifications: 1. Color: White 2. Material: PP Plastic, Metal 3. Seat Width - 12.8", Seat Depth - 7.5" 4. RC Mode: 3 Speeds Options 5. Manual Mode: 2 Speeds Accessible 6. Maximum User Weight: 62 Lbs (28kg) 7. Speed: 2-4 KM/H (2.5 mph max) 8. Charge Time: 8-12 Hrs. 9. Run Time: 1-2 Hrs. 10. Wheels: 11â??(Dia) Each 11. Battery Type: 12V 4.5AH 12. Controller Battery: 2 x AAA Batteries (not included)
Features: > Embedded design with mini size > Metal case and waterproof, conform to lP66 > User capacity: Supports up to 100 fingerprints and 3000 cards. > Card type: 125KHz EM card > One programmable relay operation > Latch mode to hold door or gate open > Tri-colour LED status display
Features: > Embedded design with mini size > Metal case and waterproof, conform to lP66 > User capacity: Supports up to 100 fingerprints and 3000 cards. > Card type: 125KHz EM card > One programmable relay operation > Latch mode to hold door or gate open > Tri-colour LED status display
HF3-WIFI WIFI TouchKey Access Controller > Capacitive Fingerprint Sensor,touch keypad > Waterproof, conforms to IP66 > Metal housing, anti-vandal > Card type: EM Card or Mifare Card > iOS and Android available > Add / Delete users by APP > Can set Time Restriction for users > Temporary Password (One-time Or Period Code) > Support checking Opening Record > Remotely Access (Support 3G/4G/5G) > Multiple Access Modes: Smartphone, Fingerprint, Card, PIN > Doorbell Call Notice