Humidity and temperature sensor transmitter Digital frequential ouput Nominal frequency 6.5 khz Std sensitivity 13 hz/%rh Response time 0.3 s Response time with Optional protection : 20 s Accurcy-interchangeability : 3 %hr de 3 a 97%rh Hysttrtsis
Non-contact temperature sensor for temperature measurement of products on web, hot-rolled metals, industrial ovens, and applications where physical contact is not possible
Gross Calorific Value (GCV) KWh/Nm3 11.131-12.647 LNG Density Kg/m3 430-478 Molecular Weight Kg/Kmol 16.52 - 18.88 Methane % mol 85.0 min 97.0 max LNG stands for Liquefied Natural Gas, which is natural gas that has been cooled to a very low temperature (-162°C or -260°F) and condensed into a liquid state. The process of liquefaction reduces the volume of natural gas by around 600 times, making it easier and more cost-effective to transport and store, particularly over long distances. LNG is odorless, colorless, and non-toxic. It is typically transported in specialized cryogenic tanker ships, and upon reaching its destination, it can be regasified back into its gaseous state for distribution through pipelines to consumers. LNG is used for a variety of purposes, including heating and electricity generation in residential, commercial, and industrial settings, as well as fuel for transportation, particularly in heavy-duty vehicles like trucks, ships, and buses.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Fertilizers like urea 46, dap, npk and refined petroleum products including diesel gas d2 oil gost 305 82, virgin d6 fuel oil, diesel en590, diesel gas oil ultra low sulphur diesel, light cycle oil (lco), aviation fuel grade jp54, aviation fuel jet a1, automotive gas oil (ago). myteaczar llc has also begun trading in agricultural commodities including soybeans (gmo/non gmo), white and yellow corn for human consumption, ethanol and feed purposes (gmo/non gmo), icumsa 45 sugar raw, refined white/brown and chicken paws..
Bonny light crude oil, blco, agricultural commodities, en590, jet fuel, jet a1, lco, jet a1, jp 54, en590 10ppm, 50ppm, 500ppm, gasoil d2, d6, lng, lpg, urea, petcoke, octane, automotive gas oil, ago & others.
Capillary cable is composed of a submersible power cable and a continuous stainless steel composite pipe. Diluent chemicals are injected into oil and gas Wells through composite pipes to make heavy oil Wells easier to recover. The injection of descaling chemical agent can effectively remove the oil pipe scaling. Sensors can be connected to collect downhole temperature, pressure, liquid level and other well parameters; The valve can be connected to the downhole safety valve and the wireline packer vent valve, and controlled on and off by surface pressure.
Physical property: Melting Temperature: -49 ºC Boiling Temperature: 240-243 ºC Density at 20ºC, g/cm3 : 1.204 Flash Point: 123 ºC Ignition Temperature: 455 ºC Packaging Details 250kg drum;1200kg/IBC; 23-24MT ISO TANK Application: 1. Reactive diluents for urethane and epoxy resins 2. Cleaner and degreasers 3. Chemical intermediates 4. Cosmetics additives 5. Electronic industry(media) as filler 6. Paint stripper 7. Foundry sand binder, wood binding resins 8. Coal mining ,excavation and tunneling 9. Removal of CO2 from Urea manufacturing, oil gas, natural gas etc 10. Setting agent in chemical grouting to get easily controlled gel time
Active potassium permanganate is a product that make from activated alumina ball deep processing. use special activated alumina as carrier, after high temperature solution compression, decompression and other processes produced, more than twice the absorption capacity of similar products, with high strength and long life period. Description: This product use special activated alumina carrier, it has two times adsorption capacity than similar products. It use strong oxidizing of potassium permanganate, reducing the harmful gas from the air oxidation decomposition, so as to achieve the purpose of cleaning the air. Applications: gas adsorbent, adsorption of sulfur dioxide, chlorine, NX, hydrogen sulfide and other gases. Packaging Details 1.25kg Kraft bag or PP Bag. 2.Big bag: 500kg PP Bag 3.According to customer's requirements Activated Sodium permanganate ball
we focus on NTC thermistor and Temperature sensor, mainly applied to HVAC / R products, medical temperature probes and automotive temperature sensors.
Description of Industrial Thermocouple RTD PT100 Temperature Sensor with 1/4" Thread Product Name :Thermocouple Type :PT100 Temperature Range :0�°C-150�°C Probe Size : 0.5 x 10cm / 0.2" x 3.9" (D*L) Thread Diameter: 8mm/ 0.31" External Material Plastic, Metal, Rubber Total Length 1M / 39.4"(we can customize other length) Fork Terminal Spacing 0.5cm
Application: CNG, LPG, LNG, AIR Body Material: Aluminium Pressure (absolute): 0~400kPa Accuracy:1% for pres. & temp. Thermal compensation:Yes Pressure response time: 1ms Temperature sensor:NTC 10KΩ (B25/50=3950) Temperature response time:2s Working Temp: -40~120 Socket Thread: M12x1.25 (defalt), M12x1 Connector type: C4 Mate Connector: AMP 1-967640-1 Burst Pressure:1600kPa Protection: IP67
Htm2500/htm2500lf relative temperature and humidity sensor * hermetic housing * humidity calibrated within +/-2% @55%rh * temperature measurement through ntc 10koohms +/-3% direct output * small size product * typical 1 to 4 volt dc output for 0 to 100%rh at 5vdc Htm2500lf relative temperature and humidity sensor description Based on the rugged hts2010 humidity / temperature sensor, htm2500 is a dedicated humidity and temperature transducer designed for oem applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage output. Htm2500lf relative temperature and humidity sensor features * full interchangeability * high reliability and long term stability * not affected by water immersion * ratiometric to vlotage supply * suitable for 3 to 10 vdc supply voltage Humidity sensor specific features * instantaneous de-saturation after long periods in saturation phase * fast response time * high resistance to chemicals * patented solid polymer structures Temperature sensor specific features * stable * high sensitivity Htm2500lf relative temperature and humidity sensor applications * industrial * process control * hygrostat * data logger
INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL Typical Applications * Contactless measurement of surface temperatures * Temperature measurement of moving objects * Remote measurement due to small angle of view * Climate control * Medical instruments Introduction The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.
HTG3535CH Humidity and Temperature Sensor Module with voltage output DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Frequency Output Temperature and Humidity Sensor HTF3226LF DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH * Small size and very cost effective * Miniature connector (JST) * 10kOhms +/-3% NTC temperature sensor (1% optional) * The best combination of cost effectiveness and performance * Stable, linear proportional frequency output from 10% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability Humidity Sensor Specific Features * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Not affected by water immersion * Patented solid polymer structure Temperature Sensor Specific Features * High quality thermistor * Stable * High sensitivity APPLICATIONS * Printers * Home Appliance -
Voltage Output Temperature and Humidity Sensor HTG3515CH DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller -
TSEV01CL55 Thermopile Sensor Module Description TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation. TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest. The basic working principle is: Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage Determination of sensor temperature using a thermistor Further analogue signal processing and conditioning Calculation of ambient and object temperature using a processing unit Providing the ambient and objects temperature at digital output bus (I2C) The TSEV01CL55 is suitable for a wide range of application where non-contact The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view. I2C pull-up resistors are provided on the sensor. The I2C interface does not block the clock for clock-stretching. FEATURES * 0'C - 300'C Measurement Range * 4V - 16V Supply Voltage Range * Up to 1.5% Accuracy * 2mA Current Consumption APPLICATIONS * Contact less Temperature Measurement * Climate Control * Industrial Process Control * Household Applications -