- Multi purpose grease MP2 and MP3 - Multi purpose grease EP2 and EP3 - Chassis grease - calcium based - Wheel Bearing grease - sodium based - Lithium Complex grease - Bentonite grease - Graphite grease (Lithium based) - Moly grease (Lithium based) - Calcium Sulfonate complex grease - Gear Compound Heavy grease
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low viscosity engine oils Superior low temperature performance Good oxidation stability Formulation Support: ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
ETRO 4+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydro-treatment - and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 4+ is the preferred choice for formulating cost effective, high-performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability Formulation Support: ETRO 4+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
FOB $250/MT MOQ 22MT Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. MOQ 22MT 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products.
(1)Appearance: Pale Yellow, Viscous Clear Liquid (2)F.F>A.( as oleic), w% 1.00 Max (3)Packing 21.5 Mts Appearance - Pale Yellow, Viscous Clear Liquid m.I.V, w% - 0.25 Max F.F>A.( as oleic), w% - 1.00 Max Acid Value, mgKOH/g - 2.00 Max Iodine Value, mgKOH/g - 82-90 Saponification value, mgKOH/g - 177-185 Hydroxyl value, mgKOH/g - 160 Min Stokes - 6.3-8.9 Insoluble impurities - 0.02% Ricinoleic Acid - 85% Min Colour on Loyibond in 5.25 Cell -20.0 Max R-2.0 Max
Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard: Â Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02
Automotive Gas Oil (AGO)
Lithium metaborate (LiBO2) is a chemical compound. The chemical formula LiBO2. Molecular weight 49.75. A colorless trisoclinal crystal with a pearly luster. Melting point 845 C, relative density 1.39741.7. Dissolve in water. Decomposition begins above 1200 C. Lithium oxide is formed. The octahydrate is a colorless tripartite crystal with a melting point of 47 C and a relative density of 1.3814.9. Preparation method: It can be made from stoichiometric lithium carbonate and boric acid melting. Purpose: To make ceramic materials. Product Name Best Price LITHIUM METABORATE / Boricacidlithiumsalt / CAS 13453-69-5 CAS NO. 13453-69-5 Appearance White Powder Purity 99% Melting Point 845 C Density 1,4 g/cm3 Storage Store at +5C to +30C Application Intermediates; Biochemical reagent; Chemical raw materials Usage LITHIUM METABORATE is used in pharmaceutical industry and preparation of acid resistant enamels. Appearance and properties: white crystal or powder Density: 1,4 g/cm3 Melting point: 845 C(lit.) Stability: Stable. Application It is used in the pharmaceutical industry and in the preparation of acid-resistant enamels 1). For the pharmaceutical industry and the preparation of acid-resistant enamel 2). 99% is used as a flux in the glass or ceramics production industry. 99.9% is used as an additive for the production of lithium-based greases. LiBO2 % 99.9 min Al % 0.005 max Ca % 0.01 max Fe % 0.005 max Na % 0.01max P % 0.005max Si % 0.01 max LOI(500C/1h) % 2.0 max Bulk Density g/cm3 0.3-0.6
Product Description Appearance and features white tetragonal crystal molecular weight 23.95 pH(1mol/L) 14 Solubility Soluble in water, slightly soluble in ethanol melting point 471.2�ºC molecular formula LiOHChemical properties It is easy to absorb carbon dioxide and moisture in the air, but the absorption capacity is slightly worse than that of NaOH and KOH. Lithium hydroxide has the general property of alkali, and the following reactions can occur. 1. alkaline reaction It can make purple litmus test solution blue and colorless phenolphthalein to turn red; and its concentrated solution can denature phenolphthalein after experimental verification, so that the solution changes from red to colorless (similar to concentrated NaOH). 2. neutralized with acid HCl+LiOH=LiCl+H2O 3. Reacts with acidic oxides 2LiOH+CO2=Li2CO3+H2O (this reaction is used to absorb carbon dioxide in aerospace) 4. Reacts with metal salt solutions FeCl3+3LiOH=Fe(OH)3â??+3LiCl Usage Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis. The additive of alkaline battery electrolyte can increase the electric capacity by 12% to 15% and increase the service life by 2 to 3 times. It can be used as an absorbent for carbon dioxide and can purify the air in submarines. The chemical equation is: 2LiOH(s)+CO2(g)=Li2CO3(s)+H2O(l). It is used to make lithium salt and lithium-based grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc.; used in petroleum, chemical industry, light industry, nuclear industry, etc. When used in alkaline batteries, the aluminum content is not more than 0.06%, and the lead content is not more than 0.01%. It is used as an analytical reagent, a photographic developer, and also in the manufacture of lithium; it is used as a raw material for the preparation of lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries.
Magnesium ingot Features: 1.Corrosion resistance and light weight. 2.The density of magnesium is 1.74g/cm3 which is even lighter than aluminum 2.7g/cm3, but mechanical strength and chemical stability are much better than aluminum. 3.Magnesium can be directly related to nitrogen, sulfur and halogen such as chemical combination, including hydrocarbons, aldehydes, alcohols, phenols, amines, grease and most of the oil pharmaceutical . Chemical composition : Mg Ingot Brand Chemical composition Mg Fe Si Ni Cu Al Cl Mn others Mg99.98 99.98 0.002 0.003 0.002 0.0005 0.004 -- 0.002 0.02 Mg99.96 99.96 0.004 0.004 0.0002 0.002 0.006 0.003 0.003 0.04 Mg99.95 99.95 0.004 0.005 0.0007 0.003 0.006 0.003 0.01 0.05 Mg99.9 99.9 0.04 0.01 0.001 0.004 0.02 0.005 0.03 0.1 Mg99.8 99.8 0.05 0.03 0.002 0.02 0.05 0.005 0.06 0.2 Application : 1.Magnesium alloys can be used to manufacture aircraft fuselages,engine parts, etc. 2.As strong reducing agent for titanium, zirconium, beryllium, uranium and hafnium production. 3. Magnesium metal is the main alloying element in aluminum alloy 4.Magnesium powder can be used as desulfurizer for steel making. 5. Magnesium also used to make photography and optical instruments, etc. 6.Can be used to produce magnesium fertilizer, promote the absorption and utilization of phosphorus by plants. 7.As an additive agent in conventional propellants and the production of nodular graphite in cast iron.
Poduct Name L-Glutathione Reduced Other Name Glycine, L-�³-glutamyl-L-cysteinyl Cas No. 70-18-8 MF C10H17N3O6S Appearance Powder Color White Purity 99% Min Package 1kg/aluminum foil bag; 25kg/drum Introduction of L-Glutathione Reduced: Glutathione (GSH) is named Reduced glutathione or L-Glutathione Reduced ,an important antioxidant in plants, animals, fungi, and some bacteria and archaea,a white crystalline powder. It is atripeptide with a gamma peptide linkage between the carboxyl group of the glutamate side chain and the amine group of cysteine, and the carboxyl group of cysteine is attached by normal peptide linkage to a glycine.Thiol groups are reducing agents, existing at a concentration around 5 mM in animal cells. Glutathione reduces disulfide bonds formed within cytoplasmicproteins to cysteines by serving as an electron donor. In the process, glutathione is converted to its oxidized form, glutathione disulfide (GSSG), also called L-glutathione. Application of L-Glutathione Reduced : 1.L-Glutathione Reduced has elimination function of lipid peroxide and grease resistance to oxidation. And has anti-lipid oxidation. It can also prevent flavor nucleotides (inosinic acid, guanylic acid) food (fish cake, sausages, sauces, etc) lose their fresh flavor nucleotides in decomposing. Besides, it can strengthen the food flavor, and greatly extend the shelf life of food. 2.Add L-Glutathione Reduced into the canned fruit, it can prevent fruit browning; Add to dairy product, it can effectively preventenzymatic and non enzymatic browning. 3.L-Glutathione Reduced can be used as a flavoring agent in various processed foods. It also has the effect of enhancing flavor when added to meat and cheese. 4.L-Glutathione Reduced has the function of protecting the liver, inhibiting formation of fatty liver. Liver protection agent.Owing to its broad spectrum of physiological function, it can be widely used in the food,especially in anti-aging, enhance immune function and anti-tumor functional food base, enhance nutrition, additives and so on.
5 x 1.5 x 7 Kraft Grease Resistant Single Serve Window Cookie Bag 500/Case This bag features a crystal-clear viewing window and eco-friendly, 100% chlorine-free and unbleached design. The moisture and grease-resistant barrier reduces the amount of greasy residue on the exterior of the bag, while offering breathability for your food. It's perfect for hot or cold displays at bakeries, cafes, and delis! Additional information Weight 6.61 lbs Dimensions 10 x 6 x 6 in Type Bread bags cookies bags Material Paper Quantity 500/case Color Brown Length 7 inches Width 5 inches, Gusset width: 1.5 inches
Fat greases
Fat Greases
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.